This layer shows census tracts that meet the following definitions: Census tracts with median household incomes at or below 80 percent of the statewide median income or with median household incomes at or below the threshold designated as low income by the Department of Housing and Community Development’s list of state income limits adopted under Healthy and Safety Code section 50093 and/or Census tracts receiving the highest 25 percent of overall scores in CalEnviroScreen 4.0 or Census tracts lacking overall scores in CalEnviroScreen 4.0 due to data gaps, but receiving the highest 5 percent of CalEnviroScreen 4.0 cumulative population burden scores or Census tracts identified in the 2017 DAC designation as disadvantaged, regardless of their scores in CalEnviroScreen 4.0 or Lands under the control of federally recognized Tribes.

These geospatial data resources and the linked mapping tool below reflect currently available data on three categories of potentially qualifying Low-Income communities: Census tracts that meet the CDFI's New Market Tax Credit Program's threshold for Low Income, thereby are able to apply to Category 1. Census tracts that meet the White House's Climate and Economic Justice Screening Tool's threshold for disadvantage in the 'Energy' category, thereby are able to apply for Additional Selection Criteria Geography. Counties that meet the USDA's threshold for Persistent Poverty, thereby are able to apply for Additional Selection Criteria Geography. Note that Category 2 - Indian Lands are not shown on this map. Note that Persistent Poverty is not calculated for US Territories. Note that CEJST Energy disadvantage is not calculated for US Territories besides Puerto Rico. The excel tool provides the land area percentage of each 2023 census tract meeting each of the above categories. To examine geographic eligibility for a specific address or latitude and longitude, visit the program's mapping tool. Additional information on this tax credit program can be found on the DOE Landing Page for the 48e program at https://www.energy.gov/diversity/low-income-communities-bonus-credit-program or the IRS Landing Page at https://www.irs.gov/credits-deductions/low-income-communities-bonus-credit. Maps last updated: September 1st, 2024 Next map update expected: December 7th, 2024 Disclaimer: The spatial data and mapping tool is intended for geolocation purposes. It should not be relied upon by taxpayers to determine eligibility for the Low-Income Communities Bonus Credit Program. Source Acknowledgements: The New Market Tax Credit (NMTC) Tract layer using data from the 2016-2020 ACS is from the CDFI Information Mapping System (CIMS) and is created by the U.S. Department of Treasury Community Development Financial Institutions Fund. To learn more, visit CDFI Information Mapping System (CIMS) | Community Development Financial Institutions Fund (cdfifund.gov). https://www.cdfifund.gov/mapping-system. Tracts are displayed that meet the threshold for the New Market Tax Credit Program. The 'Energy' Category Tract layer from the Climate and Economic Justice Screening Tool (CEJST) is created by the Council on Environmental Quality (CEQ) within the Executive Office of the President. To learn more, visit https://screeningtool.geoplatform.gov/en/. Tracts are displayed that meet the threshold for the 'Energy' Category of burden. I.e., census tracts that are at or above the 90th percentile for (energy burden OR PM2.5 in the air) AND are at or above the 65th percentile for low income. The Persistent Poverty County layer is created by joining the U.S. Department of Agriculture, Economic Research Service's Poverty Area Official Measures dataset, with relevant county TIGER/Line Shapefiles from the US Census Bureau. To learn more, visit https://www.ers.usda.gov/data-products/poverty-area-measures/. Counties are displayed that meet the thresholds for Persistent Poverty according to 'Official' USDA updates. i.e. areas with a poverty rate of 20.0 percent or more for 4 consecutive time periods, about 10 years apart, spanning approximately 30 years (baseline time period plus 3 evaluation time periods). Until Dec 7th, 2024 both the USDA estimates using 2007-2011 and 2017-2021 ACS 5-year data. On Dec 8th, 2024, only the USDA estimates using 2017-2021 data will be accepted for program eligibility.

Locations of disadvantaged and/or low-income communities designated by both California and Justice40.Definitions:California-designated Disadvantaged Communities – The California Environmental Protection Agency (CalEPA) identifies four types of geographic areas as disadvantaged: (1) census tracts receiving the highest 25 percent of overall scores in CalEnviroScreen 4.0; (2) census tracts lacking overall scores in CalEnviroScreen 4.0 due to data gaps, but receiving the highest 5 percent of CalEnviroScreen 4.0 cumulative pollution burden scores; (3) census tracts identified in the 2017 DAC designation as disadvantaged, regardless of their scores in CalEnviroScreen 4.0; (4) and areas under the control of federally recognized Tribes. California-designated Low-income Communities – Census tracts with median household incomes at or below 80 percent of the statewide median income or with median household incomes at or below the threshold designated as low income by the California Department of Housing and Community Development’s list of state income limits adopted under Health and Safety Code Section 50093. Justice40-designated disadvantaged communities - Consistent with the Justice40 Interim Guidance, U.S. Department of Transportation (DOT) and U.S. Department of Energy (DOE) developed a joint interim definition of disadvantaged communities for the National Electric Vehicle Infrastructure (NEVI) Formula Program. The joint interim definition uses publicly available data sets that capture vulnerable populations, health, transportation access and burden, energy burden, fossil dependence, resilience, and environmental and climate hazards.

This dataset represents the geospatial extent as polygons and the corresponding attribution for census block groups that meet the definition of low-income communities according to the Virginia 2020 Environmental Justice Act: “Low-income community” definition: “’Low-income community’ means any census block group in which 30 percent or more of the population is composed of people with low income.”

The referenced “low income” definition is also provided below: “Low income” definition: “’Low income’ means having an annual household income equal to or less than the greater of (i) an amount equal to 80 percent of the median income of the area in which the household is located, as reported by the Department of Housing and Urban Development, and (ii) 200 percent of the Federal Poverty Level.”

This dataset and map service provides information on the U.S. Housing and Urban Development's (HUD) low to moderate income areas. The term Low to Moderate Income, often referred to as low-mod, has a specific programmatic context within the Community Development Block Grant (CDBG) program. Over a 1, 2, or 3-year period, as selected by the grantee, not less than 70 percent of CDBG funds must be used for activities that benefit low- and moderate-income persons. HUD uses special tabulations of Census data to determine areas where at least 51% of households have incomes at or below 80% of the area median income (AMI). This dataset and map service contains the following layer.

FY2024 full and partial census tracts that qualify as Low-Moderate Income Areas (LMA) where 51% or more of the population are considered as having Low-Moderate Income. The low- and moderate-income summary data (LMISD) is based on the 2016-2020 American Community Survey (ACS). As of August 1, 2024, to qualify any new low- and moderate-income area (LMA) activities, Community Development Block Grant (CDBG) grantees should use this map and data.

For more information about LMA/LMI click the following link to open in new browser tab https://www.hudexchange.info/programs/cdbg/cdbg-low-moderate-income-data/

description: Listing of state tax credit and subsidies awarded by NYS Homes & Community Renewal s Office of Finance and Development. Details include award amount, developer name, project location, and accomplishments for completed projects based on project types.; abstract: Listing of state tax credit and subsidies awarded by NYS Homes & Community Renewal s Office of Finance and Development. Details include award amount, developer name, project location, and accomplishments for completed projects based on project types.

The Low-Income Housing Tax Credit (LIHTC) is the most important resource for creating affordable housing in the United States today. The LIHTC database, created by HUD and available to the public since 1997, contains information on 48,672 projects and 3.23 million housing units placed in service since 1987. Low-Income Housing Tax Credit Qualified Census Tracts must have 50 percent of households with incomes below 60 percent of the Area Median Gross Income (AMGI) or have a poverty rate of 25 percent or more. Difficult Development Areas (DDA) are areas with high land, construction and utility costs relative to the area median income and are based on Fair Market Rents, income limits, the 2010 census counts, and 5-year American Community Survey (ACS) data.

The Community Development Block Grant (CDBG) program requires that each CDBG funded activity must either principally benefit low- and moderate-income persons, aid in the prevention or elimination of slums or blight, or meet a community development need having a particular urgency because existing conditions pose a serious and immediate threat to the health or welfare of the community and other financial resources are not available to meet that need. With respect to activities that principally benefit low- and moderate-income persons, at least 51 percent of the activity's beneficiaries must be low and moderate income. For CDBG, a person is considered to be of low income only if he or she is a member of a household whose income would qualify as "very low income" under the Section 8 Housing Assistance Payments program. Generally, these Section 8 limits are based on 50% of area median. Similarly, CDBG moderate income relies on Section 8 "lower income" limits, which are generally tied to 80% of area median. These data are from the 2011-2015 American Community Survey (ACS). To learn more about the Low to Moderate Income Populations visit: https://www.hudexchange.info/programs/acs-low-mod-summary-data/, for questions about the spatial attribution of this dataset, please reach out to us at GISHelpdesk@hud.gov. Data Dictionary: DD_Low to Moderate Income Populations by Block GroupDate of Coverage: ACS 2020-2016

Listing of tax credits awarded by NYS Homes & Community Renewal’s Office of Finance and Development. Details include project identifier, developer name, project location, and project types.

description: ABOUT THIS TOOL: The Better Building s Clean Energy for Low Income Communities Accelerator (CELICA) was launched in 2016 to help state and local partners across the nation meet their goals for increasing uptake of energy efficiency and renewable energy technologies in low and moderate income communities. As a part of the Accelerator, DOE created this Low-Income Energy Affordability Data (LEAD) Tool to assist partners with understanding their LMI community characteristics. This can be utilized for low income and moderate income energy policy and program planning, as it provides interactive state, county and city level worksheets with graphs and data including number of households at different income levels and numbers of homeowners versus renters. It provides a breakdown based on fuel type, building type, and construction year. It also provides average monthly energy expenditures and energy burden (percentage of income spent on energy). HOW TO USE: The LEAD tool can be used to support program design and goal setting, and they can be paired with other data to improve LMI community energy benchmarking and program evaluation. Datasets are available for all 50 states, census divisions, and tract levels. You will have to enable macros in MS Excel to interact with the data. A description of each of the files and what states are included in each U.S. Census Division can be found in the file "DESCRIPTION OF FILES". For more information, visit: https://betterbuildingsinitiative.energy.gov/accelerators/clean-energy-low-income-communities; abstract: ABOUT THIS TOOL: The Better Building s Clean Energy for Low Income Communities Accelerator (CELICA) was launched in 2016 to help state and local partners across the nation meet their goals for increasing uptake of energy efficiency and renewable energy technologies in low and moderate income communities. As a part of the Accelerator, DOE created this Low-Income Energy Affordability Data (LEAD) Tool to assist partners with understanding their LMI community characteristics. This can be utilized for low income and moderate income energy policy and program planning, as it provides interactive state, county and city level worksheets with graphs and data including number of households at different income levels and numbers of homeowners versus renters. It provides a breakdown based on fuel type, building type, and construction year. It also provides average monthly energy expenditures and energy burden (percentage of income spent on energy). HOW TO USE: The LEAD tool can be used to support program design and goal setting, and they can be paired with other data to improve LMI community energy benchmarking and program evaluation. Datasets are available for all 50 states, census divisions, and tract levels. You will have to enable macros in MS Excel to interact with the data. A description of each of the files and what states are included in each U.S. Census Division can be found in the file "DESCRIPTION OF FILES". For more information, visit: https://betterbuildingsinitiative.energy.gov/accelerators/clean-energy-low-income-communities

The Low-Income Energy Affordability Data (LEAD) Tool was created by the Better Building's Clean Energy for Low Income Communities Accelerator (CELICA) to help state and local partners understand housing and energy characteristics for the low- and moderate-income (LMI) communities they serve. The LEAD Tool provides estimated LMI household energy data based on income, energy expenditures, fuel type, housing type, and geography, which stakeholders can use to make data-driven decisions when planning for their energy goals. From the LEAD Tool website, users can also create and download customized heat-maps and charts for various geographies, housing, energy characteristics, and population demographics and educational attainment. Datasets are available for 50 states plus Puerto Rico and Washington D.C., along with their cities, counties, and census tracts, as well as tribal areas. The file below, "01. Description of Files," provides a list of all files included in this dataset. A description of the abbreviations and units used in the LEAD Tool data can be found in the file below titled "02. Data Dictionary 2022". A list of geographic regions used in the LEAD Tool can be found in files 04-11. The Low-Income Energy Affordability Data comes primarily from the 2022 U.S. Census American Community Survey 5-Year Public Use Microdata Samples and is calibrated to 2022 U.S. Energy Information Administration electric utility (Survey Form-861) and natural gas utility (Survey Form-176) data. The methodology for the LEAD Tool can viewed below (3. Methodology Document). For more information, and to access the interactive LEAD Tool platform, please visit the "10. LEAD Tool Platform" resource link below. For more information on the Better Building's Clean Energy for Low Income Communities Accelerator (CELICA), please visit the "11. CELICA Website" resource below.

The Rooftop Energy Potential of Low Income Communities in America REPLICA data set provides estimates of residential rooftop solar technical potential at the tract-level with emphasis on estimates for Low and Moderate Income LMI populations. In addition to technical potential REPLICA is comprised of 10 additional datasets at the tract-level to provide socio-demographic and market context. The model year vintage of REPLICA is 2015. The LMI solar potential estimates are made at the tract level grouped by Area Median Income AMI income tenure and building type. These estimates are based off of LiDAR data of 128 metropolitan areas statistical modeling and ACS 2011-2015 demographic data. The remaining datasets are supplemental datasets that can be used in conjunction with the technical potential data for general LMI solar analysis planning and policy making. The core dataset is a wide-format CSV file seeds_ii_replica.csv that can be tagged to a tract geometry using the GEOID or GISJOIN fields. In addition users can download geographic shapefiles for the main or supplemental datasets. This dataset was generated as part of the larger NREL-led SEEDSII Solar Energy Evolution and Diffusion Studies project and specifically for the NREL technical report titled Rooftop Solar Technical Potential for Low-to-Moderate Income Households in the United States by Sigrin and Mooney 2018. This dataset is intended to give researchers planners advocates and policy-makers access to credible data to analyze low-income solar issues and potentially perform cost-benefit analysis for program design. To explore the data in an interactive web mapping environment use the NREL SolarForAll app.

This dataset comprises of the 3D reality models of settlements in the informal communities of Barrios Altos, El Agustino and José Carlos Mariátegui in Lima, Peru. The 3D reality models have been created using the photogrammetry results from a drone survey which used 4K resolution cameras at a height of up to 100 m from the settlements. The models are in 3MX file format and are accompanied by the Scene data which allow for visualisation using the freely available ContextCapture Viewer sofware by Bentley Systems, now known as iTwin Capture Viewer (which can be downloaded using the following link: https://www.bentley.com/software/itwin-capture-modeler/).

An investigation was carried out into the process involved in designing and building affordable community-driven vertical greening systems (VGS) prototypes in a low-income neighbourhood of Lagos, Nigeria. Prototypes are intended to improve indoor thermal comfort conditions and potentially provide substrate to grow edible and medicinal plants. Data, relating to 2 prototypes built in 2014 and their evaluation, comprises:the narrative / information about community participation in the design and construction of the 2 prototypes;the monitoring procedure used to collect thermal performance data;the analysis of the data collected on thermal performance;the community acceptability survey related to the prototypes.A summary is provided of a community-acceptability survey undertaken following a second round of 2 prototypes, built in the same neighbourhood in the year 2016. Research restults based upon these data are published at https://doi.org/10.1016/j.buildenv.2018.01.022

The Community Development Block Grant (CDBG) program requires that each CDBG funded activity must either principally benefit low- and moderate-income persons, aid in the prevention or elimination of slums or blight, or meet a community development need having a particular urgency because existing conditions pose a serious and immediate threat to the health or welfare of the community and other financial resources are not available to meet that need. With respect to activities that principally benefit low- and moderate-income persons, at least 51 percent of the activity's beneficiaries must be low and moderate income. For CDBG, a person is considered to be of low income only if he or she is a member of a household whose income would qualify as "very low income" under the Section 8 Housing Assistance Payments program. Generally, these Section 8 limits are based on 50% of area median. Similarly, CDBG moderate income relies on Section 8 "lower income" limits, which are generally tied to 80% of area median. These data are derived from the 2011-2015 American Community Survey (ACS) and based on Census 2010 geography.

To learn more about the Low to Moderate Income Populations visit: https://www.hudexchange.info/programs/acs-low-mod-summary-data/, for questions about the spatial attribution of this dataset, please reach out to us at GISHelpdesk@hud.gov. Data Dictionary: DD_Low to Moderate Income Populations by Tract

The affordable rental housing developments listed below are supported by the City of Chicago to maintain affordability standards. For information on rents, income requirements and availability, contact each property directly. For information on other affordable rental properties in Chicago and Illinois, call (877) 428-8844, or visit www.ILHousingSearch.org.

community-development-programs dda difficult-development-areas hud hud-official-content lihtc low-income-housing-tax-credit polygon qct qualified-census-tracts u-s-department-of-housing-and-urban-development

Eligible low-income census tracts are tracts in which:(1) The tract has a poverty rate of at least 20%; or(2)(A) For a census tract in a metropolitan area, the tract’s median family income does not exceed 80% of the greater of (A) the metropolitan area median family income or (B) statewide median family income; or(2)(B) For a census tract in a non-metropolitan area, the tract does not exceed 80% of the statewide median family income. However, in the case of a census tract located within a high migration rural county, low-income is defined by reference to 85% of statewide median family income.A “high migration rural county” is any rural county that, during the 20-year period ending with the year in which the most recent census was conducted, has a net outmigration of inhabitants from the county of at least 10% of the county population at the beginning of such period. Census tracts that are not low-income communities can be designated as Opportunity Zones if the tract is contiguous with a low income community that is designated as an Opportunity Zone and the median family income of the tract does not exceed 125% of the median family income of the low-income community with which the tract is contiguous. However, not more than 5% of the tracts designated as Opportunity Zones in a state may be designated under this provision. A determination that a tract is an Opportunity Zone shall remain in effect for ten calendar years.