This resources is metadata for Aeroradioactivity and Generalized Geologic Maps of Parts of New York, Connecticut, Rhode Island and Massachusetts, USGS GP-359, 1:250000 scale. Airborne near surface gross gamma mapping, includes geologic discussion and explanatory text. Documents are US Geological Survey maps. The data are available in the following formats: web map service, ESRI service and a zipped folder with TIFF and TFW files of the maps.The data was provided by the Connecticut Geological Survey, Department of Energy and Environmental Protection, and made available for distribution through the National Geothermal Data System.

This map depicts the 235-mile New England National Scenic Trail (NET, NPS NEEN) which traverses both Connecticut and Massachusetts. This premier hiking trail connects from the Long Island Sound in Guilford, CT to the MA/NH border. This centerline feature combines the work of the Connecticut Forest & Park Association and the Appalachian Mountain Club.https://irma.nps.gov/DataStore/Reference/Profile/2298779

no abstract provided

CSO attributes and location information are from a variety of datasets for each state: Connecticut: Beginning with GIS data compiled by the Connecticut Department of Energy and Environmental Protection (“CT DEEP”) and displayed on their CSO Right-to-Know site (https://portal.ct.gov/DEEP/Municipal-Wastewater/Combined-Sewer-Overflows-Right-to-Know), EPA filtered the data for the purposes of this map and made corrections based upon updated information available in EPA’s files. EPA’s map only displays municipalities with CSO outfalls, whereas CT DEEP’s map includes municipalities with CSO-related bypasses at their Wastewater Treatment Facilities (but no Combined Sewer Collection System CSO outfalls). EPA’s map only displays CSO outfalls – the point at which CSOs are discharged to the receiving water - whereas CT DEEP’s map includes CSO regulators (the structure through which wastewater and stormwater exits the conveyance pipe towards the Wastewater Treatment Facility). Maine: Service containing both facility and outfall locations permitted under the Maine Pollution Elimination System (MEPDES) and administered by the Maine Department of Environmental Protection (MEDEP). The data has been collected using multiple methods over 2 decades under the direction of the Maine DEP GIS Unit. All location data was quality checked by MEDEP MEPDES Inspectors and GIS Unit staff in 2018. Massachusetts: Attribute and location information from a combination of MassDEP CSOs(https://mass-eoeea.maps.arcgis.com/apps/webappviewer/index.html?id=08c0019270254f0095a0806b155abcde) (metadata - https://mass-eoeea.maps.arcgis.com/home/item.html?id=0262b339c2c74213bdaaa15adccc0e96) and NPDES permits(https://www.epa.gov/npdes-permits/massachusetts-final-individual-npdes-permits). New Hampshire: Active CSO outfalls collected from NH NPDES permits(https://www.epa.gov/npdes-permits/new-hampshire-final-individual-npdes-permits). EPA made corrections based upon updated information available in EPA’s files. Rhode Island: RI CSO Outfall Point Features. The outfalls managed by the Narragansett Bay Commission are downloadable from a GIS file through RIGIS (Rhode Island Geographic Information System https://www.rigis.org/datasets/nbc-sewer-overflows/explore?location=41.841121%2C-71.414224%2C13.57&showTable=true). Data was intended for use in utility facility engineering structure inventory. Last updated: 2019. Downloaded: 11/19/2021. Metadata (https://www.arcgis.com/sharing/rest/content/items/2108bab269df47f988e59c18a556f37d/info/metadata/metadata.xml?format=default&output=html) Vermont: Attribute and location information from Vermont Open Geodata Poral (https://geodata.vermont.gov/datasets/VTANR::stormwater-infrastructure-point-features/explore?location=43.912839%2C-72.414150%2C9.29). Point, line, and polygon data was collected and compiled through field observations, municipal member knowledge, ortho-photo interpretation, digitization of georeferenced town plans and record drawings, and state stormwater permit plans. Accuracy of all data is for planning purposes and field verification is at the user’s discretion. VT Layer: Stormwater Infrastructure (Point Features) Metadata (https://www.arcgis.com/sharing/rest/content/items/5c9875ee609c4586bd569dbacb2d92f1/info/metadata/metadata.xml?format=default&output=html).

no abstract provided

This map is designed for use in ArcGIS Navigator and contains data for the U.S. Northeast Region supporting map display, geocoding and routing. The U.S. Northeast Region includes Connecticut, Maine, Massachusetts, New Hampshire, New Jersey, New York, Pennsylvania, Rhode Island, and Vermont.
The data is from ArcGIS StreetMap Premium North America 2025 Release 1 (based on TomTom 2024.12 vintage).

Note: Only the latest version of the map is available for download. See the 
Navigator map coverage 
and click on the map to access details (including file size, updated date, and data source).

No Description Was Provided. Link Function: 375-- download.

Data included in this map service is part of the CT Environmental Conditions Online (CTECO) website. CT ECO is the collaborative work of the Connecticut Department of Energy and Environmental Protection (DEEP) and the University of Connecticut Center for Land Use Education and Research (CLEAR) to share environmental and natural resource information with the general public. Northeast United States Boundary Index includes generalized boundaries for Connecticut, Massachusetts, Maine, New Hampshire, New Jersey, New York, Rhode Island, and Vermont. The information includes state, county and town boundaries. Boundary lines have been minimally generalized to reduce vertices. Features such as small and medium offshore islands were eliminated. It may contain some boundary line and county name errors for states other than Connecticut.Detailed information about these and other Connecticut data sets is available on the CT ECO website in the form of Northeast State Line Metadata, and Northeast State Polygon Metadata.

Initializing forest landscape models (FLMs) to simulate changes in tree species composition requires accurate fine-scale forest attribute information mapped contiguously over large areas. Nearest-neighbor imputation maps have high potential for use as the initial condition within FLMs, but the tendency for field plots to be imputed over large geographical distances results in species frequently mapped outside of their home ranges, which is problematic. We developed an approach for evaluating and selecting field plots for imputation based on their similarity in feature-space, their species composition, and their geographical distance between source and imputation to produce a map that is appropriate for initializing an FLM. We applied this approach to map 13m ha of forest throughout the six New England states (Rhode Island, Connecticut, Massachusetts, New Hampshire, Vermont, and Maine). The map itself is a .img raster file of FIA plot CN numbers. To access FIA data from this map, one has to link the mapcodes in this map to FIA data supplied by USDA FIA database (https://apps.fs.usda.gov/fia/datamart/datamart.html). Due to plot confidentiality and integrity concerns, pixels containing FIA plots were always assigned to some other plot than the actual one found there.

Airports Polygon is a 1:24,000-scale, feature-based layer that includes all airport features depicted on all of the U.S. Geological Survey (USGS) 7.5 minute topographic quadrangle maps that cover the State of Connecticut and are listed on the Federal Aviation Administration (FAA) "Airport Data (5010) & Contact Information" June 5, 2008 report. Airports in New York, Massachusetts and Rhode Island that are near the Connecticut state boundary are included. Airports that are listed by FAA and are visible on aerial photography (Connecticut 2004 Orthophotos and Connecticut 2006 NAIP Color Orthophotos from National Agriculture Imagery Program) are included. Airports that are listed by FAA but are not visible on aerial photography are not included. All airports listed by FAA are included in a separate point feature-based layer, Airport FAA CT. The airport point locations were generated from latitude and longitude coordinates contained in the FAA report and all the attribute information in the report was included. The airport layer is based partly on information from USGS topographic quadrangle maps published between 1969 and 1984 which does not represent airports in Connecticut at any one particular point in time. The layer does depict current conditions as to airports listed by FAA and having _location identification codes and visible on aerial photography of 2004 and 2006. The layer delineates airports and heliports. It includes airport name, airport _location code, type of facility, public or private use of facility and state the airport is located in. It does not include airport elevation, flight schedule, runway capacity, or ownership information. Features are polygonal and generally depict landing strips and perimeters for large and small airports and helicopter landing pads. Attribute information allows to cartographic representation (symbolize) and labeling of these features on a map. This layer was originally published in 1994 and slightly updated in 2005.

This data set contains the 1995-era and 2000-era classifications of US Coast zone 65 and can be used to analyze change. This imagery was collected as part of the Multi-Resolution Land Characteristics program in a multi- agency effort to provide baseline multi-scale environmental characteristics and to monitor environmental change. This data set utilized 41 full or partial Landsat 5 and 7 scenes which were analyzed according to the Coastal Change Analysis Program (C-CAP) protocol to determine land cover. Note: These data were reprojected from their native projection into North American Datum 1983 (NAD83) / Massachusetts State Plane coordinate system, Mainland Zone (Fipszone 2001) meters by the Massachusetts Office of Coastal Zone Management on Oct. 12, 2006. All data classified as unchanged (e.g. Deciduous Forest 1996 to Deciduous Forest 2001) were grouped and converted to No Data.

no abstract provided

This ArcGIS Map Package contains information on brook trout occupancy in the southern portion of the brook trout range (PA and south). Fish sample data from a number of state and federal agencies/organizations were used to define patches for brook trout as groups of occupied contiguous catchment polygons from the National Hydrography Dataset Plus Version 1 (NHDPlusV1) catchment GIS layer. After defining patches, NHDPlusV1 catchments were assigned occupancy codes. Then state and federal agencies reviewed patches and codes to verify data accuracy. A similar effort is currently being conducted by the Eastern Brook Trout Joint Venture to develop occupancy data for the remainder of the brook trout range including states of New York, Maine, New Hampshire, Connecticut, Vermont, Massachusetts, Rhode Island, and Ohio. This ArcGIS Map Package contains data for the entire southern portion of the brook trout range with preset symbology that displays brook trout occupancy. The Map Package also includes the same information clipped into seperate layers for each state. State information is provided for the convenience of users that are interested in data for only a particular state. Additional layers displaying state boundaries, quadrangle maps, and the brook trout range are also included as spatial references.

This geographic information system (GIS) data layer shows the dominant lithology and geochemical, termed lithogeochemical, character of near-surface bedrock in the New England region covering the states of Connecticut, Maine, Massachusetts, New Hampshire, Rhode Island, and Vermont. The bedrock units in the map are generalized into groups based on their lithological composition and, for granites, geochemistry. Geologic provinces are defined as time-stratigraphic groups that share common features of age of formation, geologic setting, tectonic history, and lithology. This data set incorporates data from digital maps of two NAWQA study areas, the New England Coastal Basin (NECB) and the Connecticut, Housatonic, and Thames River Basins (CONN) areas and extends data to cover the states of Connecticut, Maine, Massachusetts, New Hampshire, Rhode Island, and Vermont. The result is a regional dataset for the lithogeochemical characterization of New England (the layer named NE_LITH). Polygons in the final coverage are attributed according to state, drainage area, geologic province, general rock type, lithogeochemical characteristics, and specific bedrock map unit.

Geologic-Geographic Information Systems (GIS) data related to Appalachian National Scenic Trail is delivered in a data package Zip (.zip) file. These data are a product of the NPS Geologic Resources Inventory (GRI) program, which is funded by the Inventory and Monitoring (I&M) Division and administered by the NPS Geologic Resources Division (GRD).Geologic-GIS data for Appalachian National Scenic Trail consists of geologic map footprints of available maps that intersect the 7.5’ quadrangles of interest (QOI) for the park. Each footprint depicts the respective map’s extent and contains information conveying map name, scale, publication year and type. The footprints are joined using a footprint ID as a key to a standalone table that contains a formal map reference, a Boolean showing if GIS data is available, additional map notes, and a URL link t o where the map can be downloaded, if available. Geologic-GIS map footprints are provided in ESRI file geodatabase format supported by a Pro 3.X map (.mapx) file. The Pro 3.x map displays the footprint data in thematic layers categorizing and symbolizing the footprints by publication year, map type, and scale.

no abstract provided

This Coastal Barrier Resources System (CBRS) data set, produced by the U.S. Fish and Wildlife Service (Service), contains areas designated as undeveloped coastal barriers in accordance with the Coastal Barrier Resources Act (CBRA), 16 U.S.C. 3501 et seq., as amended. The boundaries used to create the polygons herein were compiled between 12/6/2013 and 12/16/2016 from the official John H. Chafee Coastal Barrier Resources System CBRS maps. The boundaries of the CBRS Units in Connecticut, Massachusetts, Rhode Island, and the Long Island portion of New York, were digitized from the official paper maps according to the guidelines in a notice published in the Federal Register on August 29, 2013 (see the â Georeferencing and Boundary Interpretationâ and â Boundary Transcriptionâ sections of 78 FR 53467; available at https://www.federalregister.gov/d/2013-21167). In all other cases where the official map was created through digital methods, the digital boundary was used. These digital polygons are only representations of the CBRS boundaries shown on the official CBRS maps and are not to be considered authoritative. The Service is not responsible for any misuse or misinterpretation of this digital data set, including use of the data to determine eligibility for federal financial assistance such as federal flood insurance. CBRS maps are either enacted by Congress or adopted administratively by the Secretary of the Interior (Secretary), and are maintained by the Service. As maps are revised, this data set will be updated with the new boundaries. Copies of the official CBRS maps are available for viewing at Serviceâ s Headquarters office and are also available to view or download at https://www.fws.gov/ecological-services/habitat-conservation/cbra/Maps/index.html. CBRS boundaries viewed using the CBRS Mapper or the shapefile are subject to misrepresentations beyond the Serviceâ s control, including misalignments of the boundaries with third party base layers and misprojections of spatial data. The official CBRS map is the controlling document and should be consulted for all official determinations. Official determinations are recommended for all properties that are in close proximity (within 20 feet) of a CBRS boundary. For an official determination of whether or not an area or specific property is located within the CBRS, please follow the procedures found at https://www.fws.gov/ecological-services/habitat-conservation/cbra/Determinations.html. For any questions regarding the CBRS, please contact your local Service field office or email CBRA@fws.gov. Contact information for Service field offices can be found at http://www.fws.gov/offices.

This hosted feature layer has been published in RI State Plane Feet NAD83This is a statewide digital dataset of land cover/land use for the State of Rhode Island that combines forestry data from several existing datasets, incorporates a recently prepared shrubland dataset, and includes a manual update of some categories. The dataset covers the entire state of Rhode Island and extends approximately 1/2 mile into the neighboring states of Connecticut and Massachusetts.

The 2010 Forest Habitat Map for Rhode Island was created to provide forest owners with a simple tool to analyze and map forest habitats at the scales of 1:5000 or more using licensed or free mapping GIS software.

Debris flows, debris avalanches, mud flows and lahars are fast-moving landslides that occur in a wide variety of environments throughout the world. They are particularly dangerous to life and property because they move quickly, destroy objects in their paths, and can strike with little warning. The purpose of this map is to show where debris flows have occurred in the conterminous United States and where these slope movements might be expected in the future.

This hosted feature layer has been published in RI State Plane Feet NAD83.This is a statewide, seamless digital dataset of the land cover/land use for the State of Rhode Island derived using semi-automated methods and based on imagery captured in 2003-2004. The project area encompasses the State of Rhode Island and also extends 1/2 mile into the neighboring states of Connecticut and Massachusetts or to the limits of source orthophotography. Geographic feature accuracy meets the National Mapping Standards for 1:5000 scale mapping with respect to base level data (roads, hydrography, and orthos). The minimum mapping unit for this dataset is .5 acre. The land use classification scheme used for these data was based on the Anderson Level III modified coding schema used in previous land use datasets in Rhode Island (1988 & 1995) with some modifications for the 2003 classification.The dataset is also intended to be incorporated into the Rhode Island Geographic Information System database for use by federal, state and local government and made available to the general public under established RIGIS licensing procedures.This hosted feature service layer replaces the map service https://maps.edc.uri.edu/arcgis/rest/services/Atlas_PLAN/Land_Use_and_Land_Cover_0304/MapServer/0