The Coastal Boundary layer is a 1:24,000-scale, polygon feature-based layer of the legal mylar-based maps adopted by the Commissioner of the Department of Environmental Protection (DEP) (i.e., maps were adopted on a town by town basis) showing the extent of lands and coastal waters as defined by Connecticut General Statute (C.G.S.) 22a-93(5)) within Connecticut's coastal area (defined by C.G.S. 22a-94(c)). The coastal boundary is a hybrid of the original 1:24,000 version maps prepared by DEP consistent with C.G.S. 22a-94(d) (Coastal Area) and the revised boundary mapping undertaken by twenty-two coastal towns prepared pursuant to C.G.S. 22a-94(f). This layer therefore does not replace the legal maps and may not be used for legal determinations. The Coastal Boundary layer includes a single polygon feature that represents the coastal boundary. No other features are included in this layer. Data is compiled at 1:24,000 scale. Attribute information is comprised of an Av_Legend attribute and a CoastB_Flg attribute to denote the coastal boundary. Other attributes include automatically calculated Shape_Length and Shape_Area fields. This data is not updated. Any regulated activity conducted within the coastal boundary by a municipal agency (i.e., plans of development, zoning regulations, municipal coastal programs and coastal site plan review (i.e., site plans submitted to zoning commission, subdivision or resubdivision plans submitted to planning commission, application for special permit or exception to the zoning or planning commissions or zoning board of appeals, variance submitted to zoning board of appeals and a referral of a municipal project)) must be conducted in a manner consistent with the requirements of the Connecticut Coastal Management Act (CMA; C.G.S. 22a-90 to 22a-113). As the Coastal Boundary is a hybrid of the Coastal Area, all state and federal agency activities must be consistent with the requirements of the CMA. As defined in C.G.S. 22a-94(b) the coastal boundary is a "continuous line delineated on the landward side by the interior contour elevation of the one hundred year frequency coastal flood zone, as defined and determined by the National Flood Insurance Act, as amended (USC 42 Section 4101, P.L. 93-234), or a one thousand foot linear setback measured from the mean high water mark in coastal waters, or a one thousand foot linear setback measured from the inland boundary of tidal wetlands mapped under section 22a-20, whichever is farthest inland; and shall be delineated on the seaward side by the seaward extent of the jurisdiction of the state." The original boundary maps were created in 1979 on stable mylar overlay using the 1:24,000-scale US Geological Survey topographic quadrangle maps (mylar film format). The source for tidal wetland maps were the legal 1:24,000 maps (mylar format) adopted by the Commissioner of DEP and transformed to 1:24,000 mylar-scale maps by the Office of Policy and Management (OPM) using an accurate pantograph. OPM similarly converted FEMA's flood insurance maps (various scales) to a 1:24,000 mylar overlay. The inland extent of coastal waters was plotted on 1:24,000 USGS topographic maps following the procedures and sources described in The Boundary Between Saltwater and Freshwater in Connecticut, December 1978 prepared by the State of Connecticut, Department of Environmental Protection, Coastal Area Management Program. The following twenty-two towns have adopted municipal coastal boundaries: Chester, Clinton, Darien, Deep River, East Haven, Essex, Fairfield, Greenwich, Groton, Guilford, Hamden, Ledyard, Madison, Milford, New Haven, New London, North Haven, Norwalk, Old Lyme, Old Saybrook, Stamford and Waterford. The coastal boundary maps for these towns may be at different scales than the original DEP draft maps and may contain minor adjustments to the boundary as permitted in C.G.S. 22a-94(f).

Connecticut Historic Shoreline Wetlands:

1880s NOS T-Sheet Shoreline Features is a 1:10,000-scale, line feature-based layer that includes information depicting historic shoreline features and wetland boundaries for areas of coastal Connecticut during the 1880s. The layer depicts information found on topographic survey sheets (T-sheets) from the US Coast and Geodetic Survey (USC&GS), a predecessor to the National Ocean Service (NOS). The layer represents conditions at a particular point in time. The layer does not depict current conditions. The layer includes ground condition features such as approximate shoreline, shoreline, wetland shoreline, wetland upland boundaries, wetland interior boundaries, man-made shoreline, jetties/breakwaters/groins, and piers/ramps/docks. Semi-submerged marshes, referred to here as "low marshes," ocurring where it is possible to discern marsh-like features waterward of the shoreline are also included. Off shore and riverine islands and rocks may be included depending on the quality of their depiction on the t-sheet. It does not include any non shoreline-centric elements that may have been depicted on the t-sheets such as buildings, roads, bridges, etc., nor does it include other off-shore features like sandbars, mud flats, tidal flats, etc. Features are line locations that represent the approximate location of shoreline features and wetland boundaries. Shoreline, as depicted on the T-sheets that pre-date 1927, reference an approximation of Mean High Water (MHW). Although MHW is technically determined by averaging the height of the high water line, (HWL) the landward extent of the last high tide over a 19 year lunar cycle, USC&GS topographers appoximated MHW by familarizing themselves with the tidal conditions in a given area and noting the assorted physical characteristics of the beach. (For a more complete description of this and other shoreline indicators, the reader is directed to the following article: "Historical Shoreline Change: Error Analysis and Mapping Accuracy," Crowell, M., Leatherman, S., and Buckley, M. Journal of Coastal Research, Vol 7, No. 3, 1991, pp 839-852.) Attribute information is comprised of codes to identify individual features, encode shoreline feature type information, and cartographically represent (symbolize) shoreline features on a map. These codes were derived in part from the National Oceanic & Atmospheric Administration (NOAA) Coastal Services Center (CSC) Historic Digital Shoreline Capture project and modified by the State of Connecticut Department of Environmental Protection to address the inclusion of wetland areas. This data was compiled at 1:10,000 scale. This data is not updated. Purpose: 1880s NOS T-Sheet Shoreline Features is 1:10,000-scale data. It depicts the location of historic shoreline features and wetland boundaries for all of coastal Connecticut with the exception of the area of New Haven Harbor from the West River in West Haven to the New Haven/East Haven town boundary. The features also extend slightly beyond the Connecticut state lines into Rye, New York and Westerly, Rhode Island. Use this layer to display historic shoreline and wetlands. Since this data may be considered a crucial element in land use planning, determination of boundary extents, performing change studies for erosion and accretion examinations and other types of decision making this layer may also be used for analytic purposes. Use this layer with other 1:10,000-scale map data such as any other NOS T-sheet Shoreline or Wetland layers. Not intended for maps printed at map scales greater or more detailed than 1:10,000 scale (1 inch = 833.33 feet.)

1880s NOS T-Sheet Wetland Polygon Features is a 1:10,000-scale, polygon feature-based layer that includes information depicting historic wetlands for areas of coastal Connecticut during the 1880s. The layer depicts information found on topographic survey sheets (T-sheets) from the US Coast and Geodetic Survey (USC&GS), a predecessor to the National Ocean Service (NOS). The layer represents conditions at a particular point in time. The layer does not depict current conditions. The layer includes ground condition features such as wetland areas, interior wetland uplands, and interior wetand waterbodies. Semi-submerged marshes, referred to here as "low marshes," ocurring where it is possible to discern marsh-like features waterward of the shoreline are also included. Off shore and riverine islands and rocks may be included depending on the quality of their depiction on the t-sheet. It does not include any non wetland-centric elements that may have been depicted on the t-sheets such as buildings, roads, bridges, etc., nor does it include other off-shore features like mud flats, tidal flats, etc. Features are polygon locations that represent the approximate location of wetland areas and internal wetland features such as uplands or waterbodies. Shoreline, as depicted on the T-sheets that pre-date 1927, reference an approximation of Mean High Water (MHW). Although MHW is technically determined by averaging the height of the high water line, (HWL) the landward extent of the last high tide over a 19 year lunar cycle, USC&GS topographers appoximated MHW by familarizing themselves with the tidal conditions in a given area and noting the assorted physical characteristics of the beach. (For a more complete description of this and other shoreline indicators, the reader is directed to the following article: "Historical Shoreline Change: Error Analysis and Mapping Accuracy," Crowell, M., Leatherman, S., and Buckley, M. Journal of Coastal Research, Vol 7, No. 3, 1991, pp 839-852.) Attribute information is comprised of codes to identify individual features, encode wetland feature type information, and cartographically represent (symbolize) wetland features on a map. These codes were derived in part from the National Oceanic & Atmospheric Administration (NOAA) Coastal Services Center (CSC) Historic Digital Shoreline Capture project and modified by the State of Connecticut Department of Environmental Protection to address the inclusion of wetland areas. This data was compiled at 1:10,000 scale. This data is not updated. Purpose: 1880s NOS T-Sheet Wetland Polygon Features is 1:10,000-scale data. It depicts the location of historic wetland features for all of coastal Connecticut with the exception of the area of New Haven Harbor from the West River in West Haven to the New Haven/East haven town boundary. The features also extend slightly beyond the Connecticut state lines into Rye, New York and Westerly, Rhode Island. Use this layer to display historic wetlands. Since this data may be considered a crucial element in land use planning, determination of boundary extents, performing change studies for erosion and accretion examinations and other types of decision making this layer may also be used for analytic purposes. Use this layer with other 1:10,000-scale map data such as any other NOS T-sheet Shoreline or Wetland layers. Not intended for maps printed at map scales greater or more detailed than 1:10,000 scale (1 inch = 833.33 feet.)

Coastal Area & Boundary Polygon: The Coastal Area layer is a 1:24,000-scale, polygon feature-based layer that includes the land and waters that lie within the Coastal Area as defined by Connecticut General Statute (C.G.S.) 22a-94(a). Activities and actions conducted within the coastal area by Federal and State Agencies (i.e., U.S. Army Corps of Engineers (USACOE), DEP regulatory programs, and state plans and actions) must be consistent with all of the applicable standards and criteria contained in the Connecticut Coastal Management Act (C.G.S. 22a-90 to 22a-113). A subset of the Coastal Area, the Coastal Boundary, represents an area within which activities regulated or conducted by coastal municipalities must be consistent with the Coastal Management Act. As defined in this section of the statutes, the Coastal Area includes the land and water within the area delineated by the following: the westerly, southerly and easterly limits of the state's jurisdiction in Long Island Sound; the towns of Greenwich, Stamford, Darien, Norwalk, Westport, Fairfield, Bridgeport, Stratford, Shelton, Milford, Orange, West Haven, New Haven, Hamden, North Haven, East Haven, Branford, Guilford, Madison, Clinton, Westbrook, Deep River, Chester, Essex, Old Saybrook, Lyme, Old Lyme, East Lyme, Waterford, New London, Montville, Norwich, Preston, Ledyard, Groton and Stonington. This layer includes a single polygon feature defined by the boundaries described above. Attribute information is comprised of an Av_Legend to denote the coastal area. Data is compiled at 1:24,000 scale. This data is not updated. The Coastal Boundary layer is a 1:24,000-scale, polygon feature-based layer of the legal mylar-based maps adopted by the Commissioner of the Department of Environmental Protection (DEP) (i.e., maps were adopted on a town by town basis) showing the extent of lands and coastal waters as defined by Connecticut General Statute (C.G.S.) 22a-93(5)) within Connecticut's coastal area (defined by C.G.S. 22a-94(c)). The coastal boundary is a hybrid of the original 1:24,000 version maps prepared by DEP consistent with C.G.S. 22a-94(d) (Coastal Area) and the revised boundary mapping undertaken by twenty-two coastal towns prepared pursuant to C.G.S. 22a-94(f). This layer therefore does not replace the legal maps and may not be used for legal determinations. The Coastal Boundary layer includes a single polygon feature that represents the coastal boundary. No other features are included in this layer. Data is compiled at 1:24,000 scale. Attribute information is comprised of an Av_Legend attribute and a CoastB_Flg attribute to denote the coastal boundary. Other attributes include automatically calculated Shape_Length and Shape_Area fields. This data is not updated. Any regulated activity conducted within the coastal boundary by a municipal agency (i.e., plans of development, zoning regulations, municipal coastal programs and coastal site plan review (i.e., site plans submitted to zoning commission, subdivision or resubdivision plans submitted to planning commission, application for special permit or exception to the zoning or planning commissions or zoning board of appeals, variance submitted to zoning board of appeals and a referral of a municipal project)) must be conducted in a manner consistent with the requirements of the Connecticut Coastal Management Act (CMA; C.G.S. 22a-90 to 22a-113). As the Coastal Boundary is a hybrid of the Coastal Area, all state and federal agency activities must be consistent with the requirements of the CMA. As defined in C.G.S. 22a-94(b) the coastal boundary is a "continuous line delineated on the landward side by the interior contour elevation of the one hundred year frequency coastal flood zone, as defined and determined by the National Flood Insurance Act, as amended (USC 42 Section 4101, P.L. 93-234), or a one thousand foot linear setback measured from the mean high water mark in coastal waters, or a one thousand foot linear setback

This dataset displays the boundary of the State of Connecticut's coastal area.View Dataset on the Gateway

The NOAA Coastal Services Center purchased digital ADS40 imagery and digital elevation models of the Connecticut coastline in 2004. The Coastal Connecticut project area is comprised of approximately 930 square miles. A total of 244 orthos (122 natural color and 122 color infrared) were produced to cover this area. Aerial imagery was collected in panchromatic, Red, Green, Blue and Near Infrared which yielded a natural color and false color infrared version of the completed digital orthophotography. Imagery was collected at an approximate altitude of 15,750 feet above mean terrain. These data are the infrared orthoimagery in Geotiff format with associated browse graphics and metadata. RGB orthoimagery associated with these data are archived at the NODC under accession 0086893.

The Coastal Area layer is 1:24,000-scale data. It depicts the location of the Connecticut Coastal Area as defined by Connecticut General Statute C.G.S. 22a-94(a). Use this layer to show the Coastal Area. Use this layer with other 1:24,000-scale map data such as the Coastal Boundary, Town Boundaries, Roads and Trails, Airports, Railroads and other base map data derived from the USGS 7.5 minute topographic quadrangle maps and compiled at a 1:24000 scale. Not intended for maps printed at map scales greater or more detailed than 1:24,000 scale (1 inch = 2,000 feet.)

The Coastal Boundary layer is a 1:24,000-scale, polygon feature-based layer of the legal mylar-based maps adopted by the Commissioner of the Department of Environmental Protection (DEP) (i.e., maps were adopted on a town by town basis) showing the extent of lands and coastal waters as defined by Connecticut General Statute (C.G.S.) 22a-93(5)) within Connecticut's coastal area (defined by C.G.S. 22a-94(c)). The coastal boundary is a hybrid of the original 1:24,000 version maps prepared by DEP consistent with C.G.S. 22a-94(d) (Coastal Area) and the revised boundary mapping undertaken by twenty-two coastal towns prepared pursuant to C.G.S. 22a-94(f). This layer therefore does not replace the legal maps and may not be used for legal determinations. The Coastal Boundary layer includes a single polygon feature that represents the coastal boundary. No other features are included in this layer. Data is compiled at 1:24,000 scale. Attribute information is comprised of an Av_Legend attribute and a CoastB_Flg attribute to denote the coastal boundary. Other attributes include automatically calculated Shape_Length and Shape_Area fields. This data is not updated. Any regulated activity conducted within the coastal boundary by a municipal agency (i.e., plans of development, zoning regulations, municipal coastal programs and coastal site plan review (i.e., site plans submitted to zoning commission, subdivision or resubdivision plans submitted to planning commission, application for special permit or exception to the zoning or planning commissions or zoning board of appeals, variance submitted to zoning board of appeals and a referral of a municipal project)) must be conducted in a manner consistent with the requirements of the Connecticut Coastal Management Act (CMA; C.G.S. 22a-90 to 22a-113). As the Coastal Boundary is a hybrid of the Coastal Area, all state and federal agency activities must be consistent with the requirements of the CMA. As defined in C.G.S. 22a-94(b) the coastal boundary is a "continuous line delineated on the landward side by the interior contour elevation of the one hundred year frequency coastal flood zone, as defined and determined by the National Flood Insurance Act, as amended (USC 42 Section 4101, P.L. 93-234), or a one thousand foot linear setback measured from the mean high water mark in coastal waters, or a one thousand foot linear setback measured from the inland boundary of tidal wetlands mapped under section 22a-20, whichever is farthest inland; and shall be delineated on the seaward side by the seaward extent of the jurisdiction of the state." The original boundary maps were created in 1979 on stable mylar overlay using the 1:24,000-scale US Geological Survey topographic quadrangle maps (mylar film format). The source for tidal wetland maps were the legal 1:24,000 maps (mylar format) adopted by the Commissioner of DEP and transformed to 1:24,000 mylar-scale maps by the Office of Policy and Management (OPM) using an accurate pantograph. OPM similarly converted FEMA's flood insurance maps (various scales) to a 1:24,000 mylar overlay. The inland extent of coastal waters was plotted on 1:24,000 USGS topographic maps following the procedures and sources described in The Boundary Between Saltwater and Freshwater in Connecticut, December 1978 prepared by the State of Connecticut, Department of Environmental Protection, Coastal Area Management Program. The following twenty-two towns have adopted municipal coastal boundaries: Chester, Clinton, Darien, Deep River, East Haven, Essex, Fairfield, Greenwich, Groton, Guilford, Hamden, Ledyard, Madison, Milford, New Haven, New London, North Haven, Norwalk, Old Lyme, Old Saybrook, Stamford and Waterford. The coastal boundary maps for these towns may be at different scales than the original DEP draft maps and may contain minor adjustments to the boundary as permitted in C.G.S. 22a-94(f).

This data consists of a composite inundation hazards layer for counties from TX to ME, which have a flood exposure snapshot. The dataset was developed from a union of FEMA flood hazard, USACE hurricane evacuation study, NOAA sea level rise of 3-ft above MHHW, and NOAA Shallow Coastal flooding georeferenced digital data. The source and date have been preserved for each source dataset in the attribution. A unique identifier for each hazard, a total number of hazards and hazard description list in the attribution provide coastal risk exposure for each polygon

This layer is sourced from maps.coast.noaa.gov.

This map service presents spatial information developed as part of the National Oceanic and Atmospheric Administration (NOAA) Office for Coastal Management’s Coastal Flood Exposure Mapper. The purpose of the online mapping tool is to provide coastal managers, planners, and stakeholders a preliminary look at exposures to coastal flooding hazards. The Mapper is a screening-level tool that uses nationally consistent data sets and analyses. Data and maps provided can be used at several scales to help communities initiate resilience planning efforts. Currently the extent of the Coastal Flood Exposure Mapper covers U.S. coastal areas along the Gulf of Mexico and Atlantic Ocean. NOAA provides the information “as-is” and shall incur no responsibility or liability as to the completeness or accuracy of this information. NOAA assumes no responsibility arising from the use of this information. For additional information, please contact the NOAA Office for Coastal Management (coastal.info@noaa.gov).

© NOAA Office for Coastal Management

ORIGINAL 1928 Coulton Waugh 'New York LONG ISLAND & Coastal CT' Pictorial MAP - Sold on eBay Nov 08, 2021 for $475.00 - Historical sales data for collectible reference.

This data set is the 1994-2006-era classification for Connecticut, a subset of zone 65. This data set utilized 41 full or partial Landsat 5 Thematic Mapper scenes which were analyzed according to the Coastal Change Analysis Program (C-CAP) protocol to determine land cover.

The Coastal Area layer is a 1:24,000-scale, polygon feature-based layer that includes the land and waters that lie within the Coastal Area as defined by Connecticut General Statute (C.G.S.) 22a-94(a). Activities and actions conducted within the coastal area by Federal and State Agencies (i.e., U.S. Army Corps of Engineers (USACOE), DEP regulatory programs, and state plans and actions) must be consistent with all of the applicable standards and criteria contained in the Connecticut Coastal Management Act (C.G.S. 22a-90 to 22a-113). A subset of the Coastal Area, the Coastal Boundary, represents an area within which activities regulated or conducted by coastal municipalities must be consistent with the Coastal Management Act. As defined in this section of the statutes, the Coastal Area includes the land and water within the area delineated by the following: the westerly, southerly and easterly limits of the state's jurisdiction in Long Island Sound; the towns of Greenwich, Stamford, Darien, Norwalk, Westport, Fairfield, Bridgeport, Stratford, Shelton, Milford, Orange, West Haven, New Haven, Hamden, North Haven, East Haven, Branford, Guilford, Madison, Clinton, Westbrook, Deep River, Chester, Essex, Old Saybrook, Lyme, Old Lyme, East Lyme, Waterford, New London, Montville, Norwich, Preston, Ledyard, Groton and Stonington. This layer includes a single polygon feature defined by the boundaries described above. Attribute information is comprised of an Av_Legend to denote the coastal area. Data is compiled at 1:24,000 scale. This data is not updated.

The Coastal Boundary layer is 1:24,000-scale data. It shows the extent of lands and coastal waters as defined by C.G.S. 22a-93(5) within Connecticut's coastal area (defined by C.G.S. 22a-94(c)). Use this layer to show the Coastal Boundary on maps with other 1:24,000-scale data such as Coastal Area, Town Boundaries, Roads and Trails, Airports, Railroads and other base map data derived from the USGS 7.5 Minute Quadrangle Maps and compiled at a 1:24,000 scale. Not intended for maps printed at map scales greater or more detailed than 1:24,000 scale (1 inch = 2,000 feet.)

See full Data Guide here. This layer includes polygon features that depict protected open space for towns of the Protected Open Space Mapping (POSM) project, which is administered by the Connecticut Department of Energy and Environmental Protection, Land Acquisition and Management. Only parcels that meet the criteria of protected open space as defined in the POSM project are in this layer. Protected open space is defined as: (1) Land or interest in land acquired for the permanent protection of natural features of the state's landscape or essential habitat for endangered or threatened species; or (2) Land or an interest in land acquired to permanently support and sustain non-facility-based outdoor recreation, forestry and fishery activities, or other wildlife or natural resource conservation or preservation activities. Includes protected open space data for the towns of Andover, Ansonia, Ashford, Avon, Beacon Falls, Canaan, Clinton, Berlin, Bethany, Bethel, Bethlehem, Bloomfield, Bridgewater, Bolton, Brookfield, Brooklyn, Canterbury, Canton, Chaplin, Cheshire, Colchester, Colebrook, Columbia, Cornwall, Coventry, Cromwell, Danbury, Derby, East Granby, East Haddam, East Hampton, East Hartford, East Windsor, Eastford, Ellington, Enfield, Essex, Farmington, Franklin, Glastonbury, Goshen, Granby, Griswold, Groton, Guilford, Haddam, Hampton, Hartford, Hebron, Kent, Killingworth, Lebanon, Ledyard, Lisbon, Litchfield, Madison, Manchester, Mansfield, Marlborough, Meriden, Middlebury, Middlefield, Middletown, Monroe, Montville, Morris, New Britain, New Canaan, New Fairfield, New Milford, New Hartford, Newington, Newtown, Norfolk, North, Norwich, Preston, Ridgefield, Shelton, Stonington, Oxford, Plainfield, Plainville, Pomfret, Portland, Prospect, Putnam, Redding, Rocky Hill, Roxbury, Salem, Salisbury, Scotland, Seymour, Sharon, Sherman, Simsbury, Somers, South Windsor, Southbury, Southington, Sprague, Sterling, Suffield, Thomaston, Thompson, Tolland, Torrington, Union, Vernon, Wallingford, Windham, Warren, Washington, Waterbury, Watertown, West Hartford, Westbrook, Weston, Wethersfield, Willington, Wilton, Windsor, Windsor Locks, Wolcott, Woodbridge, Woodbury, and Woodstock. Additional towns are added to this list as they are completed. The layer is based on information from various sources collected and compiled during the period from March 2005 through the present. These sources include but are not limited to municipal Assessor's records (the Assessor's database, hard copy maps and deeds) and existing digital parcel data. The layer represents conditions as of the date of research at each city or town hall. The Protected Open Space layer includes the parcel shape (geometry), a project-specific parcel ID based on the Town and Town Assessor's lot numbering system, and system-defined (automatically generated) fields. The Protected Open Space layer has an accompanying table containing more detailed information about each feature (parcel). This table is called Protected Open Space Dat, and can be joined to Protected Open Space in ArcMap using the parcel ID (PAR_ID) field. Detailed information in the Protected Open Space Data attribute table includes the Assessor's Map, Block and Lot numbers (the Assessor's parcel identification numbering system), the official name of the parcel (such as the park or forest name if it has one), address and owner information, the deed volume and page numbers, survey information, open space type, the unique parcel ID number (Par_ID), comments collected by researchers during city/town hall visits, and acreage. This layer does not include parcels that do not meet the definition of open space as defined above. Features are stored as polygons that represent the best available locational information, and are "best fit" to the land base available for each.

The Connecticut Department of Environmental Protection's (CTDEP) Permanently Protected Open Space Phase Mapping Project Phase 1 (Protected Open Space Phase1) layer includes permanently protected open space parcels in towns in Phase 1 that meet the CTDEP's definition for this project, the Permanently Protected Open Space Mapping (CT POSM) Project. The CTDEP defines permanently protected open space as (1) Land or interest in land acquired for the permanent protection of natural features of the state's landscape or essential habitat for endangered or threatened species; or (2) Land or an interest in land acquired to permanently support and sustain non facility-based outdoor recreations, forestry and fishery activities, or other wildlife or natural resource conservation or preservation activities.

Towns in Phase 1 of the CT POSM project are situated along the CT coast and portions of the Thames River and are the following: Branford, Bridgeport, Chester, Clinton, Darien, Deep River, East Haven, East Lyme, Essex, Fairfield, Greenwich, Groton, Guilford, Hamden, Ledyard, Lyme, Madison, Milford, Montville, New Haven, New London, North Branford, North Haven, Norwalk, Norwich, Old Lyme, Old Saybrook, Orange, Preston, Shelton, Stamford, Stonington, Stratford, Waterford, West Haven, Westbrook, Westport.

For the purposes of the project a number of categories or classifications of open space have also been created. These include: Land Trust, Land Trust with buidlings, Private, Private with buildings, Utility Company, Utility Company with buildings, Federal, State, Municipal, Municipal with buildings, Conservation easement, and non-DEP State land. The layer is based on information from various sources collected and compiled during the period from August 2002 trhough October 2003. These sources include municipal Assessor's records (the Assessor's database, hard copy maps and deeds) and existing digital parcel data. The layer represents conditions on the date of research at each city or town hall.

The Protected Open Space Phase1 layer includes the parcel shape (geometry), a project-specific parcel ID based on the Town and Town's Assessor lot numbering system, and system-defined (automatically generated) fields. In addition, the Protected_Open_Space_Phase1 layer has an accompanying table containing more detailed information about each parcel's collection, standardization and storage. This table is called Protected Open Space Phase1 Data and can be joined to Protected Open Space Phase1 in ArcMap using the parcel ID (PAR_ID) field. Detailed information includes the Assessor's Map, Block and Lot numbers (the Assessor's parcel identification numbering system), the official name of the parcel (such as the park or forest name if it has one), address and owner information, the deed volume and page numbers, survey information, open space type, the project-specific parcel ID number (Par_ID), comments collected by researchers during city/town hall visits, acreage collected during site reconaissance and the data source. This layer does not include parcels that do not meet the definition of open space as defined above. Features are stored as polygon feature type that represent the best available locational information, i.e. "best fit" to the land base available for each.

Phase 1 of the Protected Open Space Mapping (POSM) Project was accomplished by a contractor using only a querying process to identify open space. The contractor obtained assessor's data from the various towns and created programs to cull open space parcels strictly by query processes. We have found many errors and omissions in the data, but at this point in the project we cannot revisit all the coastal towns. Therefore, this data is being sent with a disclaimer for accuracy. You are welcome to use it but not to publish it. Please note that we do not include any water company parcels despite them being listed as part of our criteria because we must first obtain written clarification and clearance from the U.S. Department of Homeland Security.

We have since changed our data collection method for Phase 2 of this project. DEP staff now visit each town hall and thoroughly research the land records. The project is expected to be complete by 2010.

Connecticut Historic Shoreline Wetlands:

1880s NOS T-Sheet Shoreline Features is a 1:10,000-scale, line feature-based layer that includes information depicting historic shoreline features and wetland boundaries for areas of coastal Connecticut during the 1880s. The layer depicts information found on topographic survey sheets (T-sheets) from the US Coast and Geodetic Survey (USC&GS), a predecessor to the National Ocean Service (NOS). The layer represents conditions at a particular point in time. The layer does not depict current conditions. The layer includes ground condition features such as approximate shoreline, shoreline, wetland shoreline, wetland upland boundaries, wetland interior boundaries, man-made shoreline, jetties/breakwaters/groins, and piers/ramps/docks. Semi-submerged marshes, referred to here as "low marshes," ocurring where it is possible to discern marsh-like features waterward of the shoreline are also included. Off shore and riverine islands and rocks may be included depending on the quality of their depiction on the t-sheet. It does not include any non shoreline-centric elements that may have been depicted on the t-sheets such as buildings, roads, bridges, etc., nor does it include other off-shore features like sandbars, mud flats, tidal flats, etc. Features are line locations that represent the approximate location of shoreline features and wetland boundaries. Shoreline, as depicted on the T-sheets that pre-date 1927, reference an approximation of Mean High Water (MHW). Although MHW is technically determined by averaging the height of the high water line, (HWL) the landward extent of the last high tide over a 19 year lunar cycle, USC&GS topographers appoximated MHW by familarizing themselves with the tidal conditions in a given area and noting the assorted physical characteristics of the beach. (For a more complete description of this and other shoreline indicators, the reader is directed to the following article: "Historical Shoreline Change: Error Analysis and Mapping Accuracy," Crowell, M., Leatherman, S., and Buckley, M. Journal of Coastal Research, Vol 7, No. 3, 1991, pp 839-852.) Attribute information is comprised of codes to identify individual features, encode shoreline feature type information, and cartographically represent (symbolize) shoreline features on a map. These codes were derived in part from the National Oceanic & Atmospheric Administration (NOAA) Coastal Services Center (CSC) Historic Digital Shoreline Capture project and modified by the State of Connecticut Department of Environmental Protection to address the inclusion of wetland areas. This data was compiled at 1:10,000 scale. This data is not updated. Purpose: 1880s NOS T-Sheet Shoreline Features is 1:10,000-scale data. It depicts the location of historic shoreline features and wetland boundaries for all of coastal Connecticut with the exception of the area of New Haven Harbor from the West River in West Haven to the New Haven/East Haven town boundary. The features also extend slightly beyond the Connecticut state lines into Rye, New York and Westerly, Rhode Island. Use this layer to display historic shoreline and wetlands. Since this data may be considered a crucial element in land use planning, determination of boundary extents, performing change studies for erosion and accretion examinations and other types of decision making this layer may also be used for analytic purposes. Use this layer with other 1:10,000-scale map data such as any other NOS T-sheet Shoreline or Wetland layers. Not intended for maps printed at map scales greater or more detailed than 1:10,000 scale (1 inch = 833.33 feet.)

1880s NOS T-Sheet Wetland Polygon Features is a 1:10,000-scale, polygon feature-based layer that includes information depicting historic wetlands for areas of coastal Connecticut during the 1880s. The layer depicts information found on topographic survey sheets (T-sheets) from the US Coast and Geodetic Survey (USC&GS), a predecessor to the National Ocean Service (NOS). The layer represents conditions at a particular point in time. The layer does not depict current conditions. The layer includes ground condition features such as wetland areas, interior wetland uplands, and interior wetand waterbodies. Semi-submerged marshes, referred to here as "low marshes," ocurring where it is possible to discern marsh-like features waterward of the shoreline are also included. Off shore and riverine islands and rocks may be included depending on the quality of their depiction on the t-sheet. It does not include any non wetland-centric elements that may have been depicted on the t-sheets such as buildings, roads, bridges, etc., nor does it include other off-shore features like mud flats, tidal flats, etc. Features are polygon locations that represent the approximate location of wetland areas and internal wetland features such as uplands or waterbodies. Shoreline, as depicted on the T-sheets that pre-date 1927, reference an approximation of Mean High Water (MHW). Although MHW is technically determined by averaging the height of the high water line, (HWL) the landward extent of the last high tide over a 19 year lunar cycle, USC&GS topographers appoximated MHW by familarizing themselves with the tidal conditions in a given area and noting the assorted physical characteristics of the beach. (For a more complete description of this and other shoreline indicators, the reader is directed to the following article: "Historical Shoreline Change: Error Analysis and Mapping Accuracy," Crowell, M., Leatherman, S., and Buckley, M. Journal of Coastal Research, Vol 7, No. 3, 1991, pp 839-852.) Attribute information is comprised of codes to identify individual features, encode wetland feature type information, and cartographically represent (symbolize) wetland features on a map. These codes were derived in part from the National Oceanic & Atmospheric Administration (NOAA) Coastal Services Center (CSC) Historic Digital Shoreline Capture project and modified by the State of Connecticut Department of Environmental Protection to address the inclusion of wetland areas. This data was compiled at 1:10,000 scale. This data is not updated. Purpose: 1880s NOS T-Sheet Wetland Polygon Features is 1:10,000-scale data. It depicts the location of historic wetland features for all of coastal Connecticut with the exception of the area of New Haven Harbor from the West River in West Haven to the New Haven/East haven town boundary. The features also extend slightly beyond the Connecticut state lines into Rye, New York and Westerly, Rhode Island. Use this layer to display historic wetlands. Since this data may be considered a crucial element in land use planning, determination of boundary extents, performing change studies for erosion and accretion examinations and other types of decision making this layer may also be used for analytic purposes. Use this layer with other 1:10,000-scale map data such as any other NOS T-sheet Shoreline or Wetland layers. Not intended for maps printed at map scales greater or more detailed than 1:10,000 scale (1 inch = 833.33 feet.)

This Feature Class was created in 2014 as a part of the State of Connecticut’s Policy Intergovernmental Policy Division grant to the Southern Connecticut Regional Council of Governments for the Regional Web-Based GIS program.The development of the parcel layer was started in 1998-1999 by East Coast Mapping of New Hampshire. East Coast created CAD Drawings for the Town of Wallingford generated through the digitization of Town of Wallingford’s Tax Maps. By use of stereoscopic techniques East Coast created a seamless parcel base from a 2000 aerial flight’s orthophoto’s (1x600ft scale). The CAD files and base were then given to the Wallingford’s Town Engineer who maintained the base. New England Geosystems of Middletown, CT received the CAD files from Wallingford in 2014 and converted the files to GIS format to create the parcel layer. Last Updated: April 2019

The U.S. Geological Survey, in cooperation with the National Oceanic and Atmospheric Administration and the Connecticut Department of Environmental Protection, has produced detailed geologic maps of the sea floor in Long Island Sound, a major East Coast estuary surrounded by the most densely populated region of the United States. These studies have built upon cooperative research with the State of Connecticut that was initiated in 1982. The current phase of this research program is directed toward studies of sea-floor sediment distribution, processes that control sediment distribution, nearshore environmental concerns, and the relation of benthic community structures to the sea-floor geology. Anthropogenic wastes, toxic chemicals, and changes in land-use patterns resulting from residential, commercial, and recreational development have stressed the environment of the Sound, causing degradation and potential loss of benthic habitats (Koppelman and others, 1976; Long Island Sound Study, 1994). Detailed maps of the sea floor are needed to help evaluate the extent of adverse impacts and to help manage resources wisely in the future. Therefore, in a continuing effort to better understand Long Island Sound, we have constructed and interpreted sidescan sonar mosaics (complete-coverage acoustic images of the sea floor) within specific areas of special interest (Poppe and Polloni, 1998; fig. 1). The mosaic presented herein covers a 41.1 km2 of the sea floor in north-central Long Island Sound off Branford, Connecticut. The mosaics and their interpretations serve many purposes, including: (1) defining the geological variability of the sea floor, which is one of the primary controls of benthic habitat diversity; (2) improving our understanding of the processes that control the distribution and transport of bottom sediments and the distribution of benthic habitats and associated infaunal community structures; and (3) providing a detailed framework for future research, monitoring, and management activities. The sidescan sonar mosaics also serve as base maps for subsequent sedimentological, geochemical, and biological observations, because precise information on environmental setting is important for selection of sampling sites and for accurate interpretation of point measurements.

Worst case hurricane surge inundation areas for category 1 through 4 hurricanes striking the coast of Connecticut. Hurricane surge values were developed by the National Hurricane Center using the SLOSH (Sea Lake and Overland Surge from Hurricanes) Model. This Surge Inundation layer was created by the U.S. Army Corps of Engineers, New England District. Using ArcInfo's Grid extension, LiDAR bare earth elevation data from both the State of Connecticut and FEMA was subtracted from the worst-case hurricane surge values to determine which areas could be expected to be inundated.Estimated storm surge indundation from hurricanes along the Connecticut coastline. Color corresponds to the storm category (category 1, 2, 3, or 4)

This Feature Class was created in 2014 as a part of the State of Connecticut’s Policy Intergovernmental Policy Division grant to the Southern Connecticut Regional Council of Governments for the Regional Web-Based GIS program.The development of the parcel layer was started in 1998-1999 by East Coast Mapping of New Hampshire. East Coast created CAD Drawings for the Town of Wallingford generated through the digitization of Town of Wallingford’s Tax Maps. By use of stereoscopic techniques East Coast created a seamless parcel base from a 2000 aerial flight’s orthophoto’s (1x600ft scale). The CAD files and base were then given to the Wallingford’s Town Engineer who maintained the base. New England Geosystems of Middletown, CT received the CAD files from Wallingford in 2014 and converted the files to GIS format to create the parcel layer.

This is an interactive map that shows the track of the EF-1 tornado in Montgomery, NY, the EF-1 tornado from Bethany to North Haven, CT. and the microburst damage area from North Haven to the CT coast. Click over the microburst damage areas to display more information.

See full Data Guide here. Regional Drainage Basin Set:

Connecticut Regional Drainage Basins is 1:24,000-scale, polygon and line feature data that define Regional drainage basin areas in Connecticut. These large basins mostly range from 40 to 400 square miles in size and make up the even larger major drainage basin areas. Connecticut Regional Drainage Basins includes drainage areas for all Connecticut rivers, streams, brooks, lakes, reservoirs and ponds published on 1:24,000-scale 7.5 minute topographic quadrangle maps prepared by the USGS between 1969 and 1984. Data is compiled at 1:24,000 scale (1 inch = 2,000 feet). This information is not updated. Polygon and line features represent drainage basin areas and boundaries, respectively. Each basin area (polygon) feature is outlined by one or more major and regional basin boundary (line) feature. These data include 85 regional basin area (polygon) features and 529 regional basin boundary (line) features. Regional Basin area (polygon) attributes include major and regional basin number, and feature size in acres and square miles. The regional basin number (RBAS_NO) uniquely identifies individual basins and is 2 characters in length. There are 44 unique regional basin numbers. Examples include 43, 60 and 61. The first digit (column 1) designates the major basin and the first two digits (columns 1-2) designate the regional basin. Note, there are slightly more regional basin polygon features (85) than unique regional basin numbers (44) due to coastal regional basins defined by series of polygon features located along the Connecticut shoreline. Regional basin boundary (line) attributes include a drainage divide type attribute (DIVIDE) used to cartographically represent the hierarchical drainage basin system. This divide type attribute is used to assign different line symbology to individual major and regional drainage basin divides. For example, major basin drainage divides are more pronounced and shown with a wider line symbol than regional basin drainage divides. Connecticut Regional Drainage Basin polygon and line feature data are derived from the geometry and attributes of the Connecticut Drainage Basins data. Purpose: The polygon features define the contributing drainage area for individual reservoirs, lakes, ponds and river and stream reaches in Connecticut. These are hydrologic land units where precipitation is collected. Rain falling in a basin may take two courses. It may both run over the land and quickly enter surface watercourses, or it may soak into the ground moving through the earth until it surfaces at a wetland or stream. In an undisturbed natural drainage basin, the surface and ground water arrive as precipitation and leave either by evaporation or as surface runoff at the basin's outlet. A basin is a self-contained hydrologic system, with a clearly defined water budget and cycle. The amount of water that flows into the basins equals the amount that leaves. A drainage divide is the topographic barrier along a ridge or line of hilltops separating adjacent drainage basins. For example, rain or snow melt draining down one side of a hill generally will flow into a different basin and stream than water draining down the other side of the hill. These hillsides are separated by a drainage divided that follows nearby hilltops and ridge lines. Use these basin data to identify where rainfall flows over land and downstream to a particular watercourse. Use these data to categorize and tabulate information according to drainage basin by identifying the local basin number for individual reservoir, lake, pond, stream reach, or location of interest. Due to the hierarchical nature of the basin numbering system, a database that records the 2-digit regional basin number for individual geographic locations of interest will support tabulations by major and regional basin as well as document the unique 2-digit regional basin identification number. To identify either all upstream basins draining to a particular location or all downstream basins flowing from a particular location, refer to the Gazetteer of Drainage Basin Areas of Connecticut, Nosal, 1977, CT DEP Water Resources Bulletin 45, for the hydrologic sequence, headwater to outfall, of drainage basins available at http://cteco.uconn.edu/docs/wrb/wrb45_gazetteer_of_drainage_areas_of_connecticut.pdf Not intended for maps printed at map scales greater or more detailed than 1:24,000 scale (1 inch = 2,000 feet.). Not intended for analysis with other digital data compiled at scales greater than or more detailed than 1:24,000 scale. Use these data with 1:24,000-scale hydrography data also available from the State of Connecticut, Department of Environmental Protection.

Connecticut Regional Drainage Basins is 1:24,000-scale, polygon and line feature data that define Regional drainage basin areas in Connecticut. These large basins mostly range from 40 to 400 square miles in size and make up the even larger major drainage basin areas. Connecticut Regional Drainage Basins includes drainage areas for all Connecticut rivers, streams, brooks, lakes, reservoirs and ponds published on 1:24,000-scale 7.5 minute topographic quadrangle maps prepared by the USGS between 1969 and 1984. Data is compiled at 1:24,000 scale (1 inch = 2,000 feet). This information is not updated. Polygon and line features represent drainage basin areas and boundaries, respectively. Each basin area (polygon) feature is outlined by one or more major and regional basin boundary (line) feature. These data include 85 regional basin area (polygon) features and 529 regional basin boundary (line) features. Regional Basin area (polygon) attributes include major and regional basin number, and feature size in acres and square miles. The regional basin number (RBAS_NO) uniquely identifies individual basins and is 2 characters in length. There are 44 unique regional basin numbers. Examples include 43, 60 and 61. The first digit (column 1) designates the major basin and the first two digits (columns 1-2) designate the regional basin. Note, there are slightly more regional basin polygon features (85) than unique regional basin numbers (44) due to coastal regional basins defined by series of polygon features located along the Connecticut shoreline. Regional basin boundary (line) attributes include a drainage divide type attribute (DIVIDE) used to cartographically represent the hierarchical drainage basin system. This divide type attribute is used to assign different line symbology to individual major and regional drainage basin divides. For example, major basin drainage divides are more pronounced and shown with a wider line symbol than regional basin drainage divides. Connecticut Regional Drainage Basin polygon and line feature data are derived from the geometry and attributes of the Connecticut Drainage Basins data.