Web map used in Delaware County GIS Data Extract application that allows users to extract Delaware County, Ohio GIS data in various formats.

Download .zipA potentiometric surface map is a contour map that represents the top of the ground water surface in an aquifer. The contour lines illustrate the potentiometric surface much like the contour lines of a topographic map represent a visual model of the ground surface. A potentiometric surface map is very similar to a water table map in that both show the horizontal direction and gradient of ground water flow.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Geological Survey2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6693Email: gis.support@dnr.ohio.gov

Geospatial data about Kent County, Delaware Towns. Export to CAD, GIS, PDF, CSV and access via API.

Since 1987, the University of Delaware has prepared GIS-based Water Resource Protection Area (WRPA) mapping for New Castle County that serves to protect the quality and quantity of ground and surface water supplies as part of the Unified Development Code (UDC). The WRPA program is enabled under Section 10 (Environmental Standards) of the UDC for New Castle County. The intent of the ordinances is to protect the quality and quantity of surface water and groundwater supplies through the protection of environmentally sensitive areas important to the state’s water supply. Under the UDC, all development within recharge, wellhead, Cockeysville formation, and reservoir water resource protection areas are required to meet maximum impervious cover thresholds (20–50%) and may require groundwater recharge facilities, water monitoring, and water management facilities. Presently, over 20 percent of New Castle County’s land area is protected by the WRPA provisions of the UDC. UDWRC's 2022 GIS based mapping updates represent the sixth revision to the maps. These maps depict several data layers that represent the four main WRPA categories in New Castle County, Delaware–Cockeysville Formation, Wellhead WRPA, Surface Water WRPA, and Recharge WRPA. The maps serve as a guide for development and assist decision-making in New Castle County, Delaware. The WRPA data will soon be available for download at Delaware FirstMap and PDF versions of the maps are available on the UDWRC website.

description: The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the UTM projection (Zone 15) and coordinate system.; abstract: The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the UTM projection (Zone 15) and coordinate system.

Geospatial data about Sussex County, Delaware Parcels. Export to CAD, GIS, PDF, CSV and access via API.

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the Delaware (FIPS 0700) State Plane projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000. Coastal study data as defined in FEMA Gudelines and Specifications, Appendix D: Guidance for Coastal Flooding Analyses and Mapping, submitted as a result of a coastal study. Appendix D notes that a variety of analytical methodologies may be used to establish Base (1-percent-annual-chance) Flood Elevations (BFEs) and floodplains throughout coastal areas of the United States. Appendix D itemizes references for the methodologies currently in use by FEMA for specific coastal flood hazards, provides general guidance for documentation of a coastal flood hazard analysis, specifies flood hazard analysis procedures for the Great Lakes coasts, and outlines intermediate data submissions for coastal flood hazard analyses with new storm surge modeling and revised stillwater flood level (SWFL). (Source: FEMA Guidelines and Specs, Appendix D Guidance for Coastal Flooding Analyses and Mapping, Section D.1)

The Digital Surficial Geologic-GIS Map of Upper Delaware Scenic and Recreational River, New York and Pennsylvania is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (upde_surficial_geology.gdb), a 2.) Open Geospatial Consortium (OGC) geopackage, and 3.) 2.2 KMZ/KML file for use in Google Earth, however, this format version of the map is limited in data layers presented and in access to GRI ancillary table information. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file (upde_surficial_geology.mapx) and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (upde_surficial_geology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). The OGC geopackage is supported with a QGIS project (.qgz) file. Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) A GIS readme file (upde_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (upde_surficial_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (upde_surficial_geology_metadata_faq.pdf). Please read the upde_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. Google Earth software is available for free at: https://www.google.com/earth/versions/. QGIS software is available for free at: https://www.qgis.org/en/site/. Users are encouraged to only use the Google Earth data for basic visualization, and to use the GIS data for any type of data analysis or investigation. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: Pennsylvania Geological Survey, New York State Geological Survey and U.S. Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (upde_surficial_geology_metadata.txt or upde_surficial_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:50,000 and United States National Map Accuracy Standards features are within (horizontally) 25.4 meters or 83.3 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in Google Earth, ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

This map shows the surficial geology of Kent County, Delaware, at a scale of 1:100,000. Maps at this scale are useful for viewing general geologic framework on a county-wide basis, determining the geology of watersheds, and recognizing the relationship of geology to regional or county-wide environmental or land-use issues. The map was compiled from topographic and geologic maps, aerial photographs, geologists' and drillers' logs, geophysical logs, soils maps, and sample descriptions. Samples from drill holes and outcrops were examined for comparison with previous descriptions. Descriptions of geologic units, unless otherwise referenced, were generated by the author after examination of cores, outcrops, and samples from the Delaware Geological Survey Core and Sample Repository.

Geospatial data about Kent County, Delaware Roads. Export to CAD, GIS, PDF, CSV and access via API.

This Map Service provides both the Downtown Development District boundaries along with point information for the Grants awarded for Projects through the Downtown Development program. It also provides point locations for Building Permits and Development Applications gathered from each county and municipality by the Office of State Planning Coordination.

description: The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the Delaware (FIPS 0700) State Plane projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000. Coastal study data as defined in FEMA Gudelines and Specifications, Appendix D: Guidance for Coastal Flooding Analyses and Mapping, submitted as a result of a coastal study. Appendix D notes that a variety of analytical methodologies may be used to establish Base (1-percent-annual-chance) Flood Elevations (BFEs) and floodplains throughout coastal areas of the United States. Appendix D itemizes references for the methodologies currently in use by FEMA for specific coastal flood hazards, provides general guidance for documentation of a coastal flood hazard analysis, specifies flood hazard analysis procedures for the Great Lakes coasts, and outlines intermediate data submissions for coastal flood hazard analyses with new storm surge modeling and revised stillwater flood level (SWFL). (Source: FEMA Guidelines and Specs, Appendix D Guidance for Coastal Flooding Analyses and Mapping, Section D.1); abstract: The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the Delaware (FIPS 0700) State Plane projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000. Coastal study data as defined in FEMA Gudelines and Specifications, Appendix D: Guidance for Coastal Flooding Analyses and Mapping, submitted as a result of a coastal study. Appendix D notes that a variety of analytical methodologies may be used to establish Base (1-percent-annual-chance) Flood Elevations (BFEs) and floodplains throughout coastal areas of the United States. Appendix D itemizes references for the methodologies currently in use by FEMA for specific coastal flood hazards, provides general guidance for documentation of a coastal flood hazard analysis, specifies flood hazard analysis procedures for the Great Lakes coasts, and outlines intermediate data submissions for coastal flood hazard analyses with new storm surge modeling and revised stillwater flood level (SWFL). (Source: FEMA Guidelines and Specs, Appendix D Guidance for Coastal Flooding Analyses and Mapping, Section D.1)

This vector data set contains the rock unit polygons for the 1:24,000 scale statewide surficial geology. This layer was constructed by combining the available 1:24,000 scale rock unit polygons from the following Delaware Geological Survey (DGS) published maps: Geologic Map No. 8, Geologic Map of the Milford and Mispillion River Quandrangles: K.W. Ramsey, 1993. Geologic Map No. 10, Bedrock Geologic Map of the Piedmont of Delaware and Adjacent Pennsylvania: W. S. Schenck, M. O. Plank, and L. Srogi, 2000. Geologic Map No. 11, Geologic Map of the Ellendale and Milton Quadrangles, Delaware: K. W. Ramsey, 2001. Geologic Map No. 12, Geologic Map of the Lewes and Cape Henlopen Quadrangles, K.W. Ramsey, 2003. Geologic Map No. 15, Geologic Map of the Georgetown Quadrangle, Delaware: K.W. Ramsey, 2010. Geologic Map No. 16, Geologic Map of the Fairmount and Rehoboth Beach Quadrangles, Delaware: K.W. Ramsey, 2011. Geologic Map No. 17, Geologic Map of the Harbeson Quadrangle, Delaware: K.W. Ramsey and J.L. Tomlinson, 2011. Geologic Map No. 18, Geologic Map of the Bethany Beach and Assawoman Bay Quadrangles, Delaware: K.W. Ramsey and J.L. Tomlinson, 2012. Geologic Map No. 19, Geologic Map of the Frankford and Selbyville Quadrangles, Delaware: J.L. Tomlinson, K.W. Ramsey, and A.S. Andres, 2013. Geologic Map No. 20, Geologic Map of the Millsboro and Whaleysville Quadrangles, Delaware: K.W. Ramsey and J.L. Tomlinson, 2014. Geologic Map No. 21, Geologic Map of the Trap Pond and Pittsville Quadrangles, Delaware: J.L. Tomlinson and K.W. Ramsey, 2014. Geologic Map No. 22, Geologic Map of the Sharptown, Laurel, Hebron, and Delmar Quadrangles, Delaware: K.W. Ramsey and J.L. Tomlinson, 2014. Geologic Map No. 23, Geologic Map of the Seaford West and Seaford East Quadrangles, Delaware: J.L. Tomlinson and K.W. Ramsey, 2015. This statewide digital, 1:24,000 scale surficial geology layer represents the "current thinking" of the DGS and may be diferent than the original geologic interpretations portrayed on the published maps above.

© Delaware Geological Survey Surficial Geology Layer, 2016, version 1.1, 1:24,000 scale

Link to the ScienceBase Item Summary page for the item described by this metadata record. Service Protocol: Link to the ScienceBase Item Summary page for the item described by this metadata record. Application Profile: Web Browser. Link Function: information

U.S. Census Bureau QuickFacts statistics for Nether Providence township, Delaware County, Pennsylvania. QuickFacts data are derived from: Population Estimates, American Community Survey, Census of Population and Housing, Current Population Survey, Small Area Health Insurance Estimates, Small Area Income and Poverty Estimates, State and County Housing Unit Estimates, County Business Patterns, Nonemployer Statistics, Economic Census, Survey of Business Owners, Building Permits.

Geology, Surficial dataset current as of 2006. Geology of Kent County, Delaware: DGS Geologic Map No. 14.

Geospatial data about Kent County, Delaware Zoning Districts. Export to CAD, GIS, PDF, CSV and access via API.

Delaware County Drainage System.IMPORTANT: this layer was created from historic township-scale hard copy maps and is not warranted against the accuracy of the locations shown. You MUST contact the County Surveyor's office for detailed information on the location of legal rains - especially underground drainage systems. Underground systems shown in the dataset are not field located and cannot be used for excavation planning.

This dataset consists of all map sheets within Delaware County, Ohio

From the site: "This data set is a digital soil survey and generally is the most detailed level of soil geographic data developed by the National Cooperative Soil Survey. The information was prepared by digitizing maps, by compiling information onto a planimetric correct base and digitizing, or by revising digitized maps using remotely sensed and other information. This data set consists of georeferenced digital map data and computerized attribute data. The map data are in a soil survey area extent format and include a detailed, field verified inventory of soils and miscellaneous areas that normally occur in a repeatable pattern on the landscape and that can be cartographically shown at the scale mapped. A special soil features layer (point and line features) is optional. This layer displays the location of features too small to delineate at the mapping scale, but they are large enough and contrasting enough to significantly influence use and management. The soil map units are linked to attributes in the National Soil Information System relational database, which gives the proportionate extent of the component soils and their properties."