Massachusetts city and town boundaries, drawn with yellow lines, and labeled with yellow municipal names, ideal for display atop aerial photography.Please see https://www.mass.gov/info-details/massgis-data-municipalities for full metadata.

This political boundary layer is the most accurate representing the city and town boundaries in the Commonwealth of Massachusetts.

This datalayer has been created from latitude and longitude coordinates found in the 68-volume Harbor and Lands Commission Town Boundary Atlas. This Atlas series, and updates since it was published, describes the legal boundary for each of the 351 municipalities in Massachusetts. These coordinates were recorded from surveys of the location of each boundary marker around the periphery of each community. Each survey was tied into higher order monumented survey control points. The Atlases also include detailed descriptions of each community's boundary and location maps for each of the original boundary marker locations. The original surveys were conducted in the 1890s. The Atlas series was published in the early 1900s and has since been updated by the Survey Section of the Massachusetts Highway Department with changes as they are approved by the legislature. MassGIS staff collaborated closely with staff from the Survey Section during the development of this data layer. MassGIS staff keyed the coordinates into a database; that data entry was double-checked by staff from the Survey Section. Staff from the Survey Section then converted the latitude/longitude coordinates to the NAD83 datum and also created a version of the coordinates in state plane coordinates with units of meters. MassGIS used the state plane coordinates to "generate" points in ArcGIS. Boundary arcs from the existing USGS-derived municipal boundary data layer were then snapped to the survey-derived points. The differences between the municipal boundary arcs digitized from those on the USGS quads and those created by snapping to the survey-derived coordinates are typically plus or minus 12 feet, although these differences are sometimes less and sometimes more. Some municipal boundary arcs (about 15% of the total) follow the edge of a road or rail right-of-way or a stream or river channel. In these cases, the new boundary arcs were "heads up" digitized based on features visible on the statewide 1:5,000 color orthos from imagery flown in 2001.

For communities with a coastal boundary, MassGIS collaborated with the Massachusetts Water Resources Authority and the Department of Environmental Protection to complete a 1:12,000 scale coastline.

City/Town names' labels are included in this service.

(This service was published from a map document using the Web Mercator projection for the data frame.)

For full metadata please see http://www.mass.gov/itd/townsurvey.

Download PDF maps here.Zoning Map - 11X17in color mapZoning Map - 30X16in black & white mapZoning Map - 34X46in color mapZoning Map - 8X11in black and white mapZip Code Map - 11X17in color mapZip Code Map - 34X46in color mapExisting Affordable Housing 2008 Map - 11X17in color mapExisting Affordable Housing 2010 Map - 11X17in color mapExisting Affordable Housing 2010 Map - 34X148 color mapCDBG Map Based upon 2000 Census Tract - 11X177 color mapNeighborhood Associations MapWireless Telecommunication Anetenna Location Map - 34X46 color map

To access parcel information:Enter an address or zoom in by using the +/- tools or your mouse scroll wheel. Parcels will draw when zoomed in.Click on a parcel to display a popup with information about that parcel.Click the "Basemap" button to display background aerial imagery.From the "Layers" button you can turn map features on and off.Complete Help (PDF)Parcel Legend:Full Map LegendAbout this ViewerThis viewer displays land property boundaries from assessor parcel maps across Massachusetts. Each parcel is linked to selected descriptive information from assessor databases. Data for all 351 cities and towns are the standardized "Level 3" tax parcels served by MassGIS. More details ...Read about and download parcel dataUpdatesV 1.1: Added 'Layers' tab. (2018)V 1.2: Reformatted popup to use HTML table for columns and made address larger. (Jan 2019)V 1.3: Added 'Download Parcel Data by City/Town' option to list of layers. This box is checked off by default but when activated a user can identify anywhere and download data for that entire city/town, except Boston. (March 14, 2019)V 1.4: Data for Boston is included in the "Level 3" standardized parcels layer. (August 10, 2020)V 1.4 MassGIS, EOTSS 2021

This map service displays the year in which cities and towns in Massachusetts were first settled by Europeans. The data were gathered by the Secretary of the Commonwealth of Massachusetts. Sources include: 2010 Census Report; Community Profiles, Department of Housing and Community Development; Historic Atlas of Massachusetts, University of Massachusetts Press 1991.Data source: https://www.sec.state.ma.us/divisions/cis/historical/incorporation-settlement.htmFeature service also available.

This map service from MassGIS displays the 26 Massachusetts Gateway Cities, municipalities with:population greater than 35,000 and less than 250,000;median household income below the state average;and rate of educational attainment of a bachelor’s degree or above that is below the state average.Read more about Gateway CitiesMap service also available.

The CT Municipalities layer consists of individual polygons representing each of the 169 municipalities that make up the state of Connecticut. This feature class is based on the Towns layer originally created by CTDEEP from USGS maps. The towns from the CTDEEP data were dissolved to create 169 records (one for each town). Fields were added and deleted to create a generic schema.

The CT Municipalities feature class was created in (municipality) alphabetical order. Fields were added to identify the municipality number and the CTDOT Municipality number, which differ from each other in some cases. In 1947 the town of Saybrook officially changed its name to Deep River. Other State agencies and municipalities changed their numbering systems to reflect this name change, however, most of what is now CTDOT kept their existing numbering system. This is why the CTDOT town number for Deep River is 122, the number formerly assigned to Saybrook.

The square miles associated with each town are for their interior land mass area. Coastal communities have boundaries that extend into Long Island Sound. These town boundary extensions into Long Island Sound are not included in the square miles field.

CTDOT has created and will maintain a cartographic rendering of the geometric shape of Municipal boundaries. Official Town and City designations as incorporated areas consisting of an authorized governing body are managed by CT's Office of Policy and Management (OPM).

CTDOT has undertaken a good faith effort to represent the boundaries cartographically in a fair and equitable fashion, from the best available data compiled from existing state, regional, and local resources including - existing historical cartographic renderings of the boundary locations, supplemental survey information, and map submissions. Corrections can be submitted to the CTDOT for incorporation and correction where applicable.

Attribution was assigned to designations managed by a variety of entities that strictly follow Municipal boundaries and additional designations will be added as requested by State, regional, and local partners.

MassGIS' standardized ("Level 3") property tax parcel mapping data set was developed through a competitive procurement funded by MassGIS. Each community in the Commonwealth was bid on by one or more vendors and the unit of work awarded was a city or town. The specification for this work was Level 3 of the MassGIS Digital Parcel Standard. Standardization of assessor parcel mapping is complete for all 351 Massachusetts' cities and towns. MassGIS is now incorporating updates from municipalities into the database. This hosted feature layer is exported from MassGIS' internal database of the feature class GISDATA.L3_TAXPAR_POLY_ASSESS, which links L3_TAXPAR_POLY and L3_ASSESS. The export includes the expression: (POLY_TYPE IN ('FEE', 'TAX')) OR (POLY_TYPE IN ('ROW', 'PRIV_ROW', 'RAIL_ROW', 'WATER') AND PROP_ID IS NOT NULL) It contains several fields from GISDATA.L3_ASSESS and stacked polygons where multiple assessor records link to a parcel. It contains features that do not have an associated record in GISDATA.L3_ASSESS, except for rights of way and water bodies. ROWs and water bodies with a non-null PROP_ID are included. The data in this feature layer is used for the popups in the Massachusetts Interactive Property Map. See full data descriptionA hosted tile layer will draw very quickly at map scale of 1:18,056 (level 15) to 1:564 (level 20).

Compiled in this map are datasets from and hosted by the Massachusetts Executive Office of Energy and Environmental Affairs, Mass GIS, and the Center for Coastal Studies that focus on public access areas including: public beaches and other recreational space, conservation lands, boat ramps and marinas. Note:Open space continually changes, as explained on the MassGIS webpage, therefore please consider the Protected and Open Space layers as underdevelopment. Additionally, open space parcels are general representations and not a legal record of ownership. The following types of land included in this layer may be privately or publicly owned. Public access categories refer to legal (not physical) levels of public access and includes some areas of limited public access ( by membership only).Definitions for Level of Protection In Perpetuity (P)- Legally protected in perpetuity and recorded as such in a deed or other official document. Land is considered protected in perpetuity if it is owned by the town’s conservation commission or, sometimes, by the water department; if a town has a conservation restriction on the property in perpetuity; if it is owned by one of the state’s conservation agencies (thereby covered by article 97); if it is owned by a non-profit land trust; or if the town received federal or state assistance for the purchase or improvement of the property. Private land is considered protected if it has a deed restriction in perpetuity, if an Agriculture Preservation Restriction has been placed on it, or a Conservation Restriction has been placed on it.Temporary (T) - Legally protected for less than perpetuity (e.g. short term conservation restriction), or temporarily protected through an existing functional use. For example, some water district lands are only temporarily protected while water resource protection is their primary use.These lands could be developed for other uses at the end of their temporary protection or when their functional use is no longer necessary. These lands will revert to unprotected status at a given date unless protection status is extended.Limited (L) - Protected by legal mechanisms other than those above, or protected through functional or traditional use.These lands might be protected by a requirement of a majority municipal vote for any change in status. This designation also includes lands that are likely to remain open space for other reasons (e.g. cemeteries and municipal golf courses).None (N) - Totally unprotected by any legal or functional means. This land is usually privately owned and could be sold without restriction at any time for another use (e.g. scout camps, private golf course, and private woodland).For more information about this open space layer please visit MassGIS Content

This map service contains boundaries for the following types of public school districts:Local School - administered by a city or town school committee.Regional Academic - administered by a regional school committee.Regional Vocational Technical - administered by a regional vocational school committee.Independent Vocational and County Agricultural - administered by a board of trustees.Independent Public, including Commonwealth Charter Schools and Horace Mann Charter Schools District information as of December 2, 2014, was obtained from the Massachusetts Department of Elementary and Secondary Education (ESE).For full metadata see https://www.mass.gov/info-details/massgis-data-public-school-districtsFeature service also available.

Town of Natick, MA printable Map

This map service from MassGIS displays the 26 Massachusetts Gateway Cities, municipalities with:population greater than 35,000 and less than 250,000;median household income below the state average;and rate of educational attainment of a bachelor’s degree or above that is below the state average.Read more about Gateway CitiesFeature service also available.

Massachusetts Counties, based on Survey Towns. Contains the 14 county polygons and a detailed coastline. Published as a map service from MassGIS' ArcGIS Server platform.See full metadata

Map Tips Click on the Legend to view Average Household Size information.Zoom and Pan any map to see synchronized view of all maps.Click on Maps area to see charts and graphs. (Please pan the map to see full extent of charts and graphs if they are cut off by map window)Zoom map in larger scale to see population information by Block Groups and Blocks.Click on the Content to see information about the level of geography.

Cities and towns in Massachusetts that joined the movement for a #StateWithoutStigma.See http://www.mass.gov/eohhs/gov/departments/dph/stop-addiction/state-without-stigma/ for more.

Town of East Brookfield, MA GIS Viewer

MassGIS has processed Massachusetts municipalities (cities and towns) from the U.S. Census Bureau's 2020 data release for Massachusetts to assist GIS users who may need access to these value-added datasets. These data are suitable for use with Census 2020 products and certain Census publications and demographics surveys created after 2020.See datalayer metadata.Feature service also available.

MassGIS has processed Massachusetts municipalities (cities and towns) from the U.S. Census Bureau's 2020 data release for Massachusetts to assist GIS users who may need access to these value-added datasets. These data are suitable for use with Census 2020 products and certain Census publications and demographics surveys created after 2020.See datalayer metadata.Map service also available.

This public map service contains points and polygons representing information from the Massachusetts Cultural Resource Information System (MACRIS) database and related records on file at the Massachusetts Historical Commission (MHC), including the Inventory of Historic Assets of the Commonwealth, National Register of Historic Places nomination forms, local historic district study reports, local landmark reports, and other materials. The MACRIS database and the layers within the MACRIS Maps web application are updated regularly as new information is submitted and added, and as the accuracy of earlier versions of the datalayer is improved. Three datalayers are being made available to the public: The Inventory Points layer contains the locations of buildings, burial grounds, structures, and objects (e.g. statues, monuments, walls). The points layer is symbolized to indicate the most common historic designation types: 1) National Register of Historic Places, 2) local historic district, 3) both National Register and local historic district, 4) Preservation Restriction, 5) Massachusetts Historic Landmark (MA/HL) and 6) inventoried but not designated with one of the previous designations. Less common designations are not symbolized in MACRIS, but are included in the Designations attribute field.The Inventory Areas polygon layer includes areas and districts symbolized in MACRIS in a similar manner to Inventory Points. Another polygon layer, Towns, possesses a binary “y” or blank field to indicate whether a town has a survey pending digitization. Please note that new and updated information is added to MHC files daily, and that there may be considerable lag time before this information is reflected in MACRIS or in MACRIS Maps. Map information for “completed” towns may not reflect the most current information on file with MHC. For additional information, users may consult the source records, forms and maps that make up the official Inventory of Historic and Archaeological Assets of the Commonwealth, on file at the MHC, Massachusetts Archives Building, 220 Morrissey Boulevard, Boston, during weekday business hours. No appointment is needed. For directions, see https://www.sec.state.ma.us/mhc/.See the metadata for more details.

This layer package contains GIS data in Esri file geodatabase format. This data is also available for download as a zip archive in shapefile format.Digital parcel files for the Town of Amherst, MA as of December 31, 2013. The Town converted its existing analog tax maps to digital format in 1998. At the time of conversion, tax maps consisted of 108 27"x39" mylar sheets at 1"=100', originally created in 1957 from controlled and rectified photography taken by Air Survey Inc. (VA) in 1956. The tax maps were scanned, and digital line files were created with text annotation. The new line files were then overlayed onto digital color orthophotos produced in 1999, and updated, by first matching road right-of-ways, then adjusting all parcel boundaries. This data set is a spatial view that is created through a one-to-many join between TOA_Parcels_Poly and TOA_CAMA_TABLE. The join is through Map & Lot, which creates stacked parcel polygons in cases where there are multiple block numbers (accounts) for one parcel; this occurs primarily with condominium complexes, as well as with properties with agricultural preservation restrictions. This data set is refreshed on a nightly basis & reflects current information from the Town of Amherst Assessor's Vision Appraisal Database.