A PDF map that shows the Regions in England, as at December 2017. (File Size - 226 KB)

A PDF map showing the lower layer super output areas in the East of England Region of England as at December 2011. (File Size - 27 MB)

A PDF map showing the Public Health England Centres and Public Health England Regions in England as at December 2013. (File Size - 183 KB)

A PDF map that shows the NHS England Regions in England as at July 2022. (File Size - 166 KB)

The Access Network Map of England is a national composite dataset of Access layers, showing analysis of extent of Access provision for each Lower Super Output Area (LSOA), as a percentage or area coverage of access in England. The ‘Access Network Map’ was developed by Natural England to inform its work to improve opportunities for people to enjoy the natural environment. This map shows, across England, the relative abundance of accessible land in relation to where people live. Due to issues explained below, the map does not, and cannot, provide a definitive statement of where intervention is necessary. Rather, it should be used to identify areas of interest which require further exploration. Natural England believes that places where people can enjoy the natural environment should be improved and created where they are most wanted. Access Network Maps help support this work by providing means to assess the amount of accessible land available in relation to where people live. They combine all the available good quality data on access provision into a single dataset and relate this to population. This provides a common foundation for regional and national teams to use when targeting resources to improve public access to greenspace, or projects that rely on this resource. The Access Network Maps are compiled from the datasets available to Natural England which contain robust, nationally consistent data on land and routes that are normally available to the public and are free of charge. Datasets contained in the aggregated data:•
Agri-environment scheme permissive access (routes and open access)•
CROW access land (including registered common land and Section 16)•
Country Parks•
Cycleways (Sustrans Routes) including Local/Regional/National and Link Routes•
Doorstep Greens•
Local Nature Reserves•
Millennium Greens•
National Nature Reserves (accessible sites only)•
National Trails•
Public Rights of Way•
Forestry Commission ‘Woods for People’ data•
Village Greens – point data only Due to the quantity and complexity of data used, it is not possible to display clearly on a single map the precise boundary of accessible land for all areas. We therefore selected a unit which would be clearly visible at a variety of scales and calculated the total area (in hectares) of accessible land in each. The units we selected are ‘Lower Super Output Areas’ (LSOAs), which represent where approximately 1,500 people live based on postcode. To calculate the total area of accessible land for each we gave the linear routes a notional width of 3 metres so they could be measured in hectares. We then combined together all the datasets and calculated the total hectares of accessible land in each LSOA. For further information about this data see the following links:Access Network Mapping GuidanceAccess Network Mapping Metadata Full metadata can be viewed on data.gov.uk.

A PDF map showing the Rural Urban Classification (2011) of the MSOAs in the East of England Region. (File Size - 932 KB)

The Marine Maps and Chart Archive held by BGS contains maps created by BGS (the majority of which result from BGS offshore mapping projects) and also maps acquired from various other sources (e.g. UK Hydrographic Office and MCA Civil Hydrography Programme survey charts). The maps which date from the 1960s onwards are very variable in subject type and scale ranging from survey navigation to geological interpretation. The maps are primarily for the UKCS (United Kingdom Continental Shelf). The coverage of some map types is the entire UKCS whilst other have only regional or localised extent. The maps which are a mix of paper and digital are applicable to a wide range of uses including environmental, geotechnical, geophysical and geological studies. range of uses including environmental, geotechnical, geophysical and geological studies. Scanned maps can be viewed via the BGS maps portal http://www.bgs.ac.uk/data/maps.

PLEASE NOTE: This data product is not available in Shapefile format or KML at https://naturalengland-defra.opendata.arcgis.com/datasets/Defra::living-england-habitat-map-phase-4/about, as the data exceeds the limits of these formats. Please select an alternative download format.This data product is also available for download in multiple formats via the Defra Data Services Platform at https://environment.data.gov.uk/explore/4aa716ce-f6af-454c-8ba2-833ebc1bde96?download=true.The Living England project, led by Natural England, is a multi-year programme delivering a satellite-derived national habitat layer in support of the Environmental Land Management (ELM) System and the Natural Capital and Ecosystem Assessment (NCEA) Pilot. The project uses a machine learning approach to image classification, developed under the Defra Living Maps project (SD1705 – Kilcoyne et al., 2017). The method first clusters homogeneous areas of habitat into segments, then assigns each segment to a defined list of habitat classes using Random Forest (a machine learning algorithm). The habitat probability map displays modelled likely broad habitat classifications, trained on field surveys and earth observation data from 2021 as well as historic data layers. This map is an output from Phase IV of the Living England project, with future work in Phase V (2022-23) intending to standardise the methodology and Phase VI (2023-24) to implement the agreed standardised methods.The Living England habitat probability map will provide high-accuracy, spatially consistent data for a range of Defra policy delivery needs (e.g. 25YEP indicators and Environment Bill target reporting Natural capital accounting, Nature Strategy, ELM) as well as external users. As a probability map, it allows the extrapolation of data to areas that we do not have data. These data will also support better local and national decision making, policy development and evaluation, especially in areas where other forms of evidence are unavailable. Process Description: A number of data layers are used to inform the model to provide a habitat probability map of England. The main sources layers are Sentinel-2 and Sentinel-1 satellite data from the ESA Copericus programme. Additional datasets were incorporated into the model (as detailed below) to aid the segmentation and classification of specific habitat classes. Datasets used:Agri-Environment Higher Level Stewardship (HLS) Monitoring, British Geological Survey Bedrock Mapping 1:50k, Coastal Dune Geomatics Mapping Ground Truthing, Crop Map of England (RPA), Dark Peak Bog State Survey, Desktop Validation and Manual Points, EA Integrated Height Model 10m, EA Saltmarsh Zonation and Extent, Field Unit NEFU, Living England Collector App NEFU/EES, Long Term Monitoring Network (LTMN), Lowland Heathland Survey, National Forest Inventory (NFI), National Grassland Survey, National Plant Monitoring Scheme, NEFU Surveys, Northumberland Border Mires, OS Vector Map District , Priority Habitats Inventory (PHI) B Button, European Space Agency (ESA) Sentinel-1 and Sentinel-2 , Space2 Eye Lens: Ainsdale NNR, Space2 Eye Lens: State of the Bog Bowland Survey, Space2 Eye Lens: State of the Bog Dark Peak Condition Survey, Space2 Eye Lens: State of the Bog (MMU) Mountain Hare Habitat Survey Dark Peak, Uplands Inventory, West Pennines Designation NVC Survey, Wetland Inventories, WorldClim - Global Climate DataFull metadata can be viewed on data.gov.uk.

A PDF map showing the output areas in the East of England Region of England as at December 2011. (File Size - 28 MB)

Coal resource maps for the whole of the UK have been produced by the British Geological Survey as a result of joint work with Department of Trade and Industry and the Coal Authority. The Coal Resources Map is a Map of Britain depicting the spatial extent of the principal coal resources. The map shows the areas where coal and lignite are present at the surface and also where coal is buried at depth beneath younger rocks. The maps are intended to be used for resource development, energy policy, strategic planning, land-use planning, the indication of hazard in mined areas, environment assessment and as a teaching aid. In addition to a general map of coal resources for Britain data also exists for the six inset maps: Scotland; North-East; North-West; East Pennines; Lancashire, North Wales and the West Midlands; South Wales, Forest of Dean and Bristol. Available as a paper map, flat or folded, from BGS Sales or as a pdf on a CD if requested.

The index shows the availability of county series geological maps, 1:10560 scale. The maps themselves were produced on OS County Series sheets between approximately 1860 and 1960. The list indicates whether the map has been revised or re-surveyed and gives details of any later versions that have been produced. It is advisable to discuss your requirements before ordering or travelling to view these maps.

A PDF map showing the Rural Urban Classification (2011) of the OAs in the East of England Region. (File Size - 3 MB)

For much of the Geological Survey's existence, the County Series of maps were the standard large-scale maps on which geological mapping was undertaken. These maps are based on the Ordnance Survey County (or six-inch to the mile) series of maps. These maps were cut up to be used in the field to record geological observations, and on return to the office, the geology was transferred to a complete County Series map, which after approval was known as a 'standard' (England / Wales) or 'clean copy' (Scotland). This dataset contains the 'standard' or 'clean copy' County Series maps held by BGS. Geological maps represent a geologist's compiled interpretation of the geology of an area. A geologist will consider the data available at the time, including measurements and observations collected during field campaigns, as well as their knowledge of geological processes and the geological context to create a model of the geology of an area. This model is then fitted to a topographic basemap and drawn up at the appropriate scale, with generalization if necessary, to create a geological map, which is a representation of the geological model. Explanatory notes and vertical and horizontal cross sections may be published with the map. Geological maps may be created to show various aspects of the geology, or themes. The most common map themes held by BGS are solid (later referred to as bedrock) and drift (later referred to as superficial). These maps are hard-copy paper records stored in the National Geoscience Data Centre (NGDC) and are delivered as digital scans through the BGS website.

The current counties of England are defined by the ceremonial counties, a collective name for the county areas to which are appointed a Lord Lieutenant. The office of Lord Lieutenant was created in the reign of Henry VIII. The Lord Lieutenant is the chief officer of the county and representative of the Crown. Whenever the Queen visits an area she will be accompanied by the Lord Lieutenant of that area. Legally the ceremonial counties are defined by the Lieutenancies Act 1997 as ‘Counties and areas for the purposes of the lieutenancies in Great Britain’ with reference to the areas used for local government.

​

https://www.ordnancesurvey.co.uk/products/boundary-line#technical

​

Source:

https://osdatahub.os.uk/downloads/open/BoundaryLine

Licence:

Contains public sector information licensed under the Open Government Licence v3.0.

https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/

​

http://www.openstreetmap.org/images/osm_logo.png" alt=""> OpenStreetMap (openstreetmap.org) is a global collaborative mapping project, which offers maps and map data released with an open license, encouraging free re-use and re-distribution. The data is created by a large community of volunteers who use a variety of simple on-the-ground surveying techniques, and wiki-syle editing tools to collaborate as they create the maps, in a process which is open to everyone. The project originated in London, and an active community of mappers and developers are based here. Mapping work in London is ongoing (and you can help!) but the coverage is already good enough for many uses.

Browse the map of London on OpenStreetMap.org

Downloads:

The whole of England updated daily:

• england.osm.bz2 ~185M - .osm formatted raw XML data (compressed)
• england.shp.zip ~156M - ESRI shapefiles

For more details of downloads available from OpenStreetMap, including downloading the whole planet, see 'planet.osm' on the wiki.

Data access APIs:

Download small areas of the map by bounding-box. For example this URL requests the data around Trafalgar Square:
http://api.openstreetmap.org/api/0.6/map?bbox=-0.13062,51.5065,-0.12557,51.50969

Data filtered by "tag". For example this URL returns all elements in London tagged shop=supermarket:
http://www.informationfreeway.org/api/0.6/*[shop=supermarket][bbox=-0.48,51.30,0.21,51.70]

The .osm format

The format of the data is a raw XML represention of all the elements making up the map. OpenStreetMap is composed of interconnected "nodes" and "ways" (and sometimes "relations") each with a set of name=value pairs called "tags". These classify and describe properties of the elements, and ultimately influence how they get drawn on the map. To understand more about tags, and different ways of working with this data format refer to the following pages on the OpenStreetMap wiki.

• .osm - About the raw XML data format of OpenStreetMap
• Downloading data - More details of the API and extract download options
• Xapi - The extended api for filtering by tag
• Map Features - A list of tags, and what map features they represent
• Converting map data between formats - catalogue of tools for converting from .osm to other formats

Simple embedded maps

Rather than working with raw map data, you may prefer to embed maps from OpenStreetMap on your website with a simple bit of javascript. You can also present overlays of other data, in a manner very similar to working with google maps. In fact you can even use the google maps API to do this. See OSM on your own website for details and links to various javascript map libraries.

Help build the map!

The OpenStreetMap project aims to attract large numbers of contributors who all chip in a little bit to help build the map. Although the map editing tools take a little while to learn, they are designed to be as simple as possible, so that everyone can get involved. This project offers an exciting means of allowing local London communities to take ownership of their part of the map.

Read about how to Get Involved and see the London page for details of OpenStreetMap community events.

A PDF map that shows the health areas in England and Wales as at April 2019. The map shows the health geographies (clinical commissioning group, NHS region local offices, and NHS regions) that became operative in England as at April 2019 and the local health boards that became operative in Wales as at April 2019. (File Size - 929 KB)

This layer of the GeoIndex shows the location of available 1:50000 scale digital geological maps within Great Britain. The Digital Geological Map of Great Britain project (DiGMapGB) has prepared 1:625 000, 1:250 000 and 1:50 000 scale datasets for England, Wales and Scotland. The datasets themselves are available as vector data in a variety of formats in which they are structured into themes primarily for use in geographical information systems (GIS) where they can be integrated with other types of spatial data for analysis and problem solving in many earth-science-related issues. Most of the 1:50 000 scale geological maps for England & Wales and for Scotland are now available digitally as part of the DiGMapGB-50 dataset. It integrates geological information from a variety of sources. These include recent digital maps, older 'paper only' maps, and desk compilations for sheets with no published maps.

How would you define the boundaries of a town or city in England and Wales in 2016?

Maybe your definition would be based on its population size, geographic extent or where the industry and services are located. This was a question the ONS had to consider when creating a new statistical geography called Towns and Cities.

In reality, the ability to delimit the boundaries of a city or town is difficult!

Major Towns and Cities

The new statistical geography, Towns and Cities has been created based on population size and the extent of the built environment. It contains 112 towns and cities in England and Wales, where the residential and/or workday population > 75,000 people at the 2011 Census. It has been constructed using the existing Built-Up Area boundary set produced by Ordnance Survey in 2011.

This swipe map shows where the towns and cities and built-up areas are different. Just swipe the bar from left to right.

The blue polygons are the towns and cities and the purple polygons are the built-up areas.