How would you define the boundaries of a town or city in England and Wales in 2016? Maybe your definition would be based on its population size, geographic extent or where the industry and services are located. This was a question the ONS had to consider when creating a new statistical geography called Towns and Cities. In reality, the ability to delimit the boundaries of a city or town is difficult! Major Towns and Cities The new statistical geography, Towns and Cities has been created based on population size and the extent of the built environment. It contains 112 towns and cities in England and Wales, where the residential and/or workday population > 75,000 people at the 2011 Census. It has been constructed using the existing Built-Up Area boundary set produced by Ordnance Survey in 2011. This swipe map shows where the towns and cities and built-up areas are different. Just swipe the bar from left to right. The blue polygons are the towns and cities and the purple polygons are the built-up areas.

London was by far the largest urban agglomeration in the United Kingdom in 2025, with an estimated population of *** million people, more than three times as large as Manchester, the UK’s second-biggest urban agglomeration. The agglomerations of Birmingham and Leeds / Bradford had the third and fourth-largest populations, respectively, while the biggest city in Scotland, Glasgow, was the fifth largest. Largest cities in Europe Two cities in Europe had larger urban areas than London, with Istanbul having a population of around **** million and the Russian capital Moscow having a population of over **** million. The city of Paris, located just over 200 miles away from London, was the second-largest city in Europe, with a population of more than **** million people. Paris was followed by London in terms of population size, and then by the Spanish cities of Madrid and Barcelona, at *** million and *** million people, respectively. The Italian capital, Rome, was the next largest city at *** million, followed by Berlin at *** million. London’s population growth Throughout the 1980s, the population of London fluctuated from a high of **** million people in 1981 to a low of **** million inhabitants in 1988. During the 1990s, the population of London increased once again, growing from ****million at the start of the decade to **** million by 1999. London's population has continued to grow since the turn of the century, and despite declining between 2019 and 2021, it reached *** million people in 2023 and is forecast to reach almost *** million by 2047.

🇬🇧 영국 English How would you define the boundaries of a town or city in England and Wales in 2016? Maybe your definition would be based on its population size, geographic extent or where the industry and services are located. This was a question the ONS had to consider when creating a new statistical geography called Towns and Cities. In reality, the ability to delimit the boundaries of a city or town is difficult! Major Towns and Cities The new statistical geography, Towns and Cities has been created based on population size and the extent of the built environment. It contains 112 towns and cities in England and Wales, where the residential and/or workday population > 75,000 people at the 2011 Census. It has been constructed using the existing Built-Up Area boundary set produced by Ordnance Survey in 2011. This swipe map shows where the towns and cities and built-up areas are different. Just swipe the bar from left to right. The blue polygons are the towns and cities and the purple polygons are the built-up areas.

Maybe your definition would be based on its population size, geographic extent or where the industry and services are located. This was a question the ONS had to consider when creating a new statistical geography called Towns and Cities. In reality, the ability to delimit the boundaries of a city or town is difficult! Major Towns and Cities The new statistical geography, Towns and Cities has been created based on population size and the extent of the built environment. It contains 112 towns and cities in England and Wales, where the residential and/or workday population > 75,000 people at the 2011 Census. It has been constructed using the existing Built-Up Area boundary set produced by Ordnance Survey in 2011. This swipe map shows where the towns and cities and built-up areas are different. Just swipe the bar from left to right. The blue polygons are the towns and cities and the purple polygons are the built-up areas.

This file contains the digital vector boundaries for the Major Towns and Cities in England and Wales, as at December 2015. Version 2 includes centroid data in the attributes table.The boundaries available are: (BGG) Generalised Grid (50m) - clipped to the coastline (Mean High Water mark).Contains both Ordnance Survey and ONS Intellectual Property Rights.REST URL of ArcGIS for INSPIRE View Service – https://services1.arcgis.com/ESMARspQHYMw9BZ9/arcgis/rest/services/Major_Towns_and_Cities_(Dec_2015)_Boundaries_V2/MapServerREST URL of ArcGIS for INSPIRE Feature DownloadService – https://dservices1.arcgis.com/ESMARspQHYMw9BZ9/arcgis/services/Major_Towns_and_Cities_Dec_2015_Boundaries_V2/WFSServer?service=wfs&request=getcapabilitiesREST URL of Feature Access Service – https://services1.arcgis.com/ESMARspQHYMw9BZ9/arcgis/rest/services/Major_Towns_and_Cities_Dec_2015_Boundaries_V2_2022/FeatureServer

A story map on how and why the boundaries were made, and a guide to their use for statistics

This is a collection of simple maps in PDF format that are designed to be printed off and used in the classroom. The include maps of Great Britain that show the location of major rivers, cities and mountains as well as maps of continents and the World. There is very little information on the maps to allow teachers to download them and add their own content to fit with their lesson plans. Customise one print out then photocopy them for your lesson. data not available yet, holding data set (7th August). Other. This dataset was first accessioned in the EDINA ShareGeo Open repository on 2012-08-07 and migrated to Edinburgh DataShare on 2017-02-22.

Towns and Cities boundaries built from Built-up Areas.

INDEX VILLARIS: or, An Alphabetical Table of all the cities, market-towns, parishes, villages, and private seats in England and Wales was first published by John Adams in 1680. This dataset consists of a transcription of all 24,000 place-names listed in Index Villaris, together with the the symbols representing Adams's categorisation of each place and modern versions of the place-names and the counties and administrative hundred in which they lie or lay. It also comprises a transcription of the latitude and longitude recorded by Adams, and another set of coordinates generated by the application of a thin plate spline transformation calculated by matching some 2,000 place-names to the accurately-georeferenced CAMPOP Towns dataset.

The dataset has been corrected and refined to include linkage to other geospatial references such as GB1900 and OpenStreetMap, and this version is available as GeoJSON in the Linked Places Format.

The dataset can be viewed both on an interactive map and in reconstituted tabular form through the GitHub repository here.

A best fit lookup between Middle Layer Super Output Areas (MSOA) as at December 2011, and Major Towns and Cities (TCITY) as at December 2015 in England and Wales. The TCITY statistical geography provides a precise definition of the major towns and cities in England and Wales The geography has been developed specifically for the production and analysis of statistics, and is based on the Built-Up Areas geography that was created for the release of 2011 Census data (File Size 297KB).REST URL of Feature Access Service – https://services1.arcgis.com/ESMARspQHYMw9BZ9/arcgis/rest/services/MSOA11_TCITY15_EW_LU_e9458a2654ac404c961d645c86978493/FeatureServer

For more information and an overview of best-fitting follow this link - https://geoportal.statistics.gov.uk/datasets/f0aac7ccbfd04cda9eb03e353c613faa/about

The dataset and the validation are fully described in a Nature Scientific Data Descriptor https://www.nature.com/articles/s41597-019-0265-5

If you want to use this dataset in an interactive environment, then use this link https://mybinder.org/v2/gh/GeographerAtLarge/TravelTime/HEAD

The following text is a summary of the information in the above Data Descriptor.

The dataset is a suite of global travel-time accessibility indicators for the year 2015, at approximately one-kilometre spatial resolution for the entire globe. The indicators show an estimated (and validated), land-based travel time to the nearest city and nearest port for a range of city and port sizes.

The datasets are in GeoTIFF format and are suitable for use in Geographic Information Systems and statistical packages for mapping access to cities and ports and for spatial and statistical analysis of the inequalities in access by different segments of the population.

These maps represent a unique global representation of physical access to essential services offered by cities and ports.

The datasets travel_time_to_cities_x.tif (where x has values from 1 to 12) The value of each pixel is the estimated travel time in minutes to the nearest urban area in 2015. There are 12 data layers based on different sets of urban areas, defined by their population in year 2015 (see PDF report).

travel_time_to_ports_x (x ranges from 1 to 5)

The value of each pixel is the estimated travel time to the nearest port in 2015. There are 5 data layers based on different port sizes.

Format Raster Dataset, GeoTIFF, LZW compressed Unit Minutes

Data type Byte (16 bit Unsigned Integer)

No data value 65535

Flags None

Spatial resolution 30 arc seconds

Spatial extent

Upper left -180, 85

Lower left -180, -60 Upper right 180, 85 Lower right 180, -60 Spatial Reference System (SRS) EPSG:4326 - WGS84 - Geographic Coordinate System (lat/long)

Temporal resolution 2015

Temporal extent Updates may follow for future years, but these are dependent on the availability of updated inputs on travel times and city locations and populations.

Methodology Travel time to the nearest city or port was estimated using an accumulated cost function (accCost) in the gdistance R package (van Etten, 2018). This function requires two input datasets: (i) a set of locations to estimate travel time to and (ii) a transition matrix that represents the cost or time to travel across a surface.

The set of locations were based on populated urban areas in the 2016 version of the Joint Research Centre’s Global Human Settlement Layers (GHSL) datasets (Pesaresi and Freire, 2016) that represent low density (LDC) urban clusters and high density (HDC) urban areas (https://ghsl.jrc.ec.europa.eu/datasets.php). These urban areas were represented by points, spaced at 1km distance around the perimeter of each urban area.

Marine ports were extracted from the 26th edition of the World Port Index (NGA, 2017) which contains the location and physical characteristics of approximately 3,700 major ports and terminals. Ports are represented as single points

The transition matrix was based on the friction surface (https://map.ox.ac.uk/research-project/accessibility_to_cities) from the 2015 global accessibility map (Weiss et al, 2018).

Code The R code used to generate the 12 travel time maps is included in the zip file that can be downloaded with these data layers. The processing zones are also available.

Validation The underlying friction surface was validated by comparing travel times between 47,893 pairs of locations against journey times from a Google API. Our estimated journey times were generally shorter than those from the Google API. Across the tiles, the median journey time from our estimates was 88 minutes within an interquartile range of 48 to 143 minutes while the median journey time estimated by the Google API was 106 minutes within an interquartile range of 61 to 167 minutes. Across all tiles, the differences were skewed to the left and our travel time estimates were shorter than those reported by the Google API in 72% of the tiles. The median difference was −13.7 minutes within an interquartile range of −35.5 to 2.0 minutes while the absolute difference was 30 minutes or less for 60% of the tiles and 60 minutes or less for 80% of the tiles. The median percentage difference was −16.9% within an interquartile range of −30.6% to 2.7% while the absolute percentage difference was 20% or less in 43% of the tiles and 40% or less in 80% of the tiles.

This process and results are included in the validation zip file.

Usage Notes The accessibility layers can be visualised and analysed in many Geographic Information Systems or remote sensing software such as QGIS, GRASS, ENVI, ERDAS or ArcMap, and also by statistical and modelling packages such as R or MATLAB. They can also be used in cloud-based tools for geospatial analysis such as Google Earth Engine.

The nine layers represent travel times to human settlements of different population ranges. Two or more layers can be combined into one layer by recording the minimum pixel value across the layers. For example, a map of travel time to the nearest settlement of 5,000 to 50,000 people could be generated by taking the minimum of the three layers that represent the travel time to settlements with populations between 5,000 and 10,000, 10,000 and 20,000 and, 20,000 and 50,000 people.

The accessibility layers also permit user-defined hierarchies that go beyond computing the minimum pixel value across layers. A user-defined complete hierarchy can be generated when the union of all categories adds up to the global population, and the intersection of any two categories is empty. Everything else is up to the user in terms of logical consistency with the problem at hand.

The accessibility layers are relative measures of the ease of access from a given location to the nearest target. While the validation demonstrates that they do correspond to typical journey times, they cannot be taken to represent actual travel times. Errors in the friction surface will be accumulated as part of the accumulative cost function and it is likely that locations that are further away from targets will have greater a divergence from a plausible travel time than those that are closer to the targets. Care should be taken when referring to travel time to the larger cities when the locations of interest are extremely remote, although they will still be plausible representations of relative accessibility. Furthermore, a key assumption of the model is that all journeys will use the fastest mode of transport and take the shortest path.

Great Britain's (England, Scotland, Wales) towns named and represented as point features with an indicative bounding box. This data is often used for geocoding, service delivery and statistical analysis. OS Towns Data is available in a number of Ordnance Survey (OS) products: OS Open Names (bounding box and point geometry), OS Names API, MasterMap Topography Layer (point geometry), Vector Map Local (point geometry) and Vector Map District (point geometry). Small-scale cartographic representations are also available in OS cartographic products. All data is collected by Ordnance Survey as part of their role as the National Mapping Agency of Great Britain.

In 2023, almost nine million people lived in Greater London, making it the most populated ceremonial county in England. The West Midlands Metropolitan County, which contains the large city of Birmingham, was the second-largest county at 2.98 million inhabitants, followed by Greater Manchester and then West Yorkshire with populations of 2.95 million and 2.4 million, respectively. Kent, Essex, and Hampshire were the three next-largest counties in terms of population, each with around 1.89 million people. A patchwork of regions England is just one of the four countries that compose the United Kingdom of Great Britain and Northern Ireland, with England, Scotland and Wales making up Great Britain. England is therefore not to be confused with Great Britain or the United Kingdom as a whole. Within England, the next subdivisions are the nine regions of England, containing various smaller units such as unitary authorities, metropolitan counties and non-metropolitan districts. The counties in this statistic, however, are based on the ceremonial counties of England as defined by the Lieutenancies Act of 1997. Regions of Scotland, Wales, and Northern Ireland Like England, the other countries of the United Kingdom have their own regional subdivisions, although with some different terminology. Scotland’s subdivisions are council areas, while Wales has unitary authorities, and Northern Ireland has local government districts. As of 2022, the most-populated Scottish council area was Glasgow City, with over 622,000 inhabitants. In Wales, Cardiff had the largest population among its unitary authorities, and in Northern Ireland, Belfast was the local government area with the most people living there.

The population of the United Kingdom in 2023 was estimated to be approximately 68.3 million in 2023, with almost 9.48 million people living in South East England. London had the next highest population, at over 8.9 million people, followed by the North West England at 7.6 million. With the UK's population generally concentrated in England, most English regions have larger populations than the constituent countries of Scotland, Wales, and Northern Ireland, which had populations of 5.5 million, 3.16 million, and 1.92 million respectively. English counties and cities The United Kingdom is a patchwork of various regional units, within England the largest of these are the regions shown here, which show how London, along with the rest of South East England had around 18 million people living there in this year. The next significant regional units in England are the 47 metropolitan and ceremonial counties. After London, the metropolitan counties of the West Midlands, Greater Manchester, and West Yorkshire were the biggest of these counties, due to covering the large urban areas of Birmingham, Manchester, and Leeds respectively. Regional divisions in Scotland, Wales and Northern Ireland The smaller countries that comprise the United Kingdom each have different local subdivisions. Within Scotland these are called council areas whereas in Wales the main regional units are called unitary authorities. Scotland's largest Council Area by population is that of Glasgow City at over 622,000, while in Wales, it was the Cardiff Unitary Authority at around 372,000. Northern Ireland, on the other hand, has eleven local government districts, the largest of which is Belfast with a population of around 348,000.

MiniScale is a free digital map of Great Britain in a single data file that clearly shows towns and cities, motorways, major roads, railways and airports. Benefits and key features Show customers your locations around the country on maps in printed brochures and your website. Print an annotated wall map for the office wall to show your sales territories. Avoid endless panning in GIS software by zooming out from detail to MiniScale's quick-loading national overview, choosing your next city to focus on and zooming in again to street level.

A best fit lookup between 2001 Lower layer Super Output Areas (LSOA) and Major Towns and Cities (TCITY) as at December 2015 in England and Wales. The TCITY statistical geography provides a precise definition of the major towns and cities in England and Wales The geography has been developed specifically for the production and analysis of statistics, and is based on the Built-Up Areas geography that was created for the release of 2011 Census data (File Size 1.5MB). For more information and an overview of best-fitting follow this link - https://geoportal.statistics.gov.uk/datasets/f0aac7ccbfd04cda9eb03e353c613faa/about

REST URL of Feature Access Service – https://services1.arcgis.com/ESMARspQHYMw9BZ9/arcgis/rest/services/LSOA01_TCITY15_EW_LU_3ce58949f68241f4892dc8d1d23a1bfd/FeatureServer

SafeGraph Places provides baseline information for every record in the SafeGraph product suite via the Places schema and polygon information when applicable via the Geometry schema. The current scope of a place is defined as any location humans can visit with the exception of single-family homes. This definition encompasses a diverse set of places ranging from restaurants, grocery stores, and malls; to parks, hospitals, museums, offices, and industrial parks. Premium sets of Places include apartment buildings, Parking Lots, and Point POIs (such as ATMs or transit stations).

SafeGraph Places is a point of interest (POI) data offering with varying coverage depending on the country. Note that address conventions and formatting vary across countries. SafeGraph has coalesced these fields into the Places schema.

SafeGraph provides clean and accurate geospatial datasets on 51M+ physical places/points of interest (POI) globally. Hundreds of industry leaders like Mapbox, Verizon, Clear Channel, and Esri already rely on SafeGraph POI data to unlock business insights and drive innovation. Easily ingest this data to power your map products today.

A best fit lookup between 2011 Output Areas (OA) and Major Towns and Cities (TCITY) as at December 2015 in England and Wales. The TCITY statistical geography provides a precise definition of the major towns and cities in England and Wales. The geography has been developed specifically for the production and analysis of statistics, and is based on the Built-Up Areas geography that was created for the release of 2011 Census data. (File Size - 4 MB). REST URL of Feature Access Service – https://services1.arcgis.com/ESMARspQHYMw9BZ9/arcgis/rest/services/OA11_TCITY15_EW_LU_65267a69bf06490d81a4ee1458747f48/FeatureServer

For more information and an overview of best-fitting follow this link - https://geoportal.statistics.gov.uk/datasets/f0aac7ccbfd04cda9eb03e353c613faa/about

According to the 2021 Census, London was the most ethnically diverse region in England and Wales – 63.2% of residents identified with an ethnic minority group.

A PDF map that shows the counties and unitary authorities in the United Kingdom as at 1 April 2023. (File Size - 583 KB)