This map of Minnesota cities, townships, and counties was published by MnGeo in January 2019. The primary data set for the map is the "Cities, Townships, and Unorganized Territories" (MnCTU) data maintained by the Minnesota Department of Transportation. Other reference data on the map include County Seats and Other Cities, County Boundaries, Interstate, US Trunk, and State Trunk Highways, Major Rivers, Lakes, County and State Boundaries. The download is a PDF file with embedded layers that can be printed at E-scale (36" x 48").

The TRS digital data set represents the Township, Range, and Section boundaries of the state. Beginning in the late 1840s, the federal government began surveying Minnesota as part of the Public Land Survey System (PLSS). The resulting network of land survey lines divided the state into townships, ranges, sections, quarter sections, quarter-quarter sections and government lots, and laid the groundwork for contemporary land ownership patterns.

The township, range and section boundaries were digitized at MnGeo (formerly known as the Land Management Information Center - LMIC) from stable base mylars of the U.S. Geological Survey (USGS) 30-minute latitude by 60-minute longitude map series (1:100,000-scale). All survey lines were extended across water bodies despite the fact that U.S. Geological Survey base maps depict them only on land. This addition allows all sections and townships to be represented as closed areas (polygons) ensuring that township and range location can be determined for any point in the state. It also means that the data set is not affected if lake levels change over time.

The TRSQ digital data set represents the Township, Range, Section, Quarter section, and Quarter-quarter section divisions of the state. Beginning in the late 1840s, the federal government began surveying Minnesota as part of the Public Land Survey System (PLSS). The resulting network of land survey lines divided the state into townships, ranges, sections, quarter sections, quarter-quarter sections and government lots, and laid the groundwork for contemporary land ownership patterns. The quarter-quarter section remains an important subdivision for rural Minnesota since these lines are used to define local boundaries, roads, and service areas. All survey lines were extended across water bodies despite the fact that U.S. Geological Survey (USGS) base maps depict them only on land. This addition allows all sections and townships to be represented as closed areas ensuring that township and range location can be determined for any point in the state. It also means that the data is not affected if lake levels change over time. The township, range and section boundaries were digitized at MnGeo (formerly the Land Management Information Center - LMIC) from the USGS 30' x 60' map series (1:100,000-scale). Quarter section and quarter-quarter section subdivisions were calculated using the section lines. They were not digitized from original plat book survey lines or from the meandered lines that surveyors laid out around water bodies. The existence of government lots within a quarter-quarter section is recorded in the data set; however, the government lot boundaries were not digitized. If a quarter-quarter section contains more than one government lot, the number of lots is recorded -- see Lineage, Section 2, for more detail. Note: For most uses, TRSQ has been superseded by the Minnesota Department of Natural Resources (DNR) 1:24,000-scale 'Control Point Generated PLS' data set which is free online. See https://gisdata.mn.gov/dataset/plan-mndnr-public-land-survey for more information. Also, many county surveyors offices have more accurate PLS (Public Land Survey) data sets. For county webpages and contact information, see http://www.mngeo.state.mn.us/cty_contacts.html .

This is a polygon dataset for the township boundaries within Carver County derived from the County Surveryor's base map.

A downloadable, printable 8.5 x 11 inch PDF map of Watertown Township and surrounding area.

The 2022 cartographic boundary KMLs are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. The cartographic boundary files include both incorporated places (legal entities) and census designated places or CDPs (statistical entities). An incorporated place is established to provide governmental functions for a concentration of people as opposed to a minor civil division (MCD), which generally is created to provide services or administer an area without regard, necessarily, to population. Places always nest within a state, but may extend across county and county subdivision boundaries. An incorporated place usually is a city, town, village, or borough, but can have other legal descriptions. CDPs are delineated for the decennial census as the statistical counterparts of incorporated places. CDPs are delineated to provide data for settled concentrations of population that are identifiable by name, but are not legally incorporated under the laws of the state in which they are located. The boundaries for CDPs often are defined in partnership with state, local, and/or tribal officials and usually coincide with visible features or the boundary of an adjacent incorporated place or another legal entity. CDP boundaries often change from one decennial census to the next with changes in the settlement pattern and development; a CDP with the same name as in an earlier census does not necessarily have the same boundary. The only population/housing size requirement for CDPs is that they must contain some housing and population. The generalized boundaries of most incorporated places in this file are based on those as of January 1, 2022, as reported through the Census Bureau's Boundary and Annexation Survey (BAS). The generalized boundaries of all CDPs are based on those delineated as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2020 Census.

description: This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. The PLSS First Division is commonly the section. This is the first set of divisions for a PLSS Township.; abstract: This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. The PLSS First Division is commonly the section. This is the first set of divisions for a PLSS Township.

Unsigned, same as map ID1592, missing meanders

Public Parcels - Metro CTUsThis web map was created by Metro Transit's Transit Oriented Development (TOD) Office to showcase the newly expanded public parcel data in relation to existing and planned transit facilities across the Twin Cities Metropolitan Area. As of August, 2019, the parcels can also be viewed in relation to Federally approved Opportunity Zones. More information on the new US Department of Treasury Opportunity Zone Program can be found here. The purpose of the public parcel data is to increase awareness of the location and quantity of publicly owned lands at all levels of government. The Q-1 2020 dataset now includes more than 35,000 parcels from across 128 cities, townships, and unorganized territories (CTUs). These parcels are further classified and displayed by eight broad ownership or administrative categories. Users can view, analyze, share, and research publicly-owned lands that may be good candidates for TOD or some other higher/better use.The purpose of the original pilot project was to increase awareness of publicly owned parcel locations relative to Metro-area transit facilities and facilitate TOD analyses. While the current geographic extent of the data has been greatly expanded, the purpose remains the same; to raise awareness of publicly owned land for the highest & best use.For those with desktop GIS software, the Public Parcel shapefile and/or geodatabase can be downloaded here: https://gisdata.mn.gov/dataset/us-mn-state-metc-plan-public-parcels-metro-ctus

The Development Rights Maps for Dakota County, Minnesota. These maps are intended to aid townships in determining future development rights of parcels within their jurisdiction. The maps show owner name, acreage, year a house was built, and year a parcel was last divided or reassembled for each parcel. Please note, last division information is only reliable for parcels altered after 1984.

This layer is a component of Natural resources interactive map.

General_Land_Info_OlmstedCountyMNThe General Land Info Olmsted County MN map service provides dynamic base layers of land information within Olmsted County. The map service provices E911 Addresses, City Limits, Centerlines, Township and Section boundaires and the Parcels Composite, which contains a composite of several parcel types: land parcels, ROW (right-of-way) parcels, conodminiums, building units and manufactured homes.The Parcels and Addressing map service provides Olmsted County, MN addressing and land information related to tax parcels that includes current and historic addressing, subdivision and right-of-way plats, annexations and orderly annexation agreement areas, real property tax parcels and parcels by soil type, historic landmark properties. Projection: WGS_1984_Web_Mercator_Auxiliary_Sphere WKID: 3857 Authority:EPSG

A dataset listing Minnesota counties by population for 2024.

Plate 10, Geology map of Townships 60 and 61 North, Range 1 West, Cook County, Minnesota, scale 1 inch = about 1/2 mile.

Minor Civil Divisions map showing cities and townships within Scott County.

Summary Carver County City and Township Boundary file.

Description This is a polygon dataset for the city and township boundaries within Carver County derived from the County Surveryor's base map.

description: This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. These are areas of water that are defined from meander lines of the PLSS and GLO surveys. These are not the official representations of coast or water lines and are representations of the lines marked by the survey along the boundaries of meandered water at the time of survey.; abstract: This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. These are areas of water that are defined from meander lines of the PLSS and GLO surveys. These are not the official representations of coast or water lines and are representations of the lines marked by the survey along the boundaries of meandered water at the time of survey.

This dataset contains Orderly Annexation Areas within Scott County. The Orderly Annexation Area boundaries reflect areas mapped in annexation agreements between adjacent townships and cities.

description: This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. The conflicted areas feature class is a depiction of known overlaps or gaps resulting from two or more different surveys of the same area, this may also include an indication of canceled or suspended surveys.; abstract: This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. The conflicted areas feature class is a depiction of known overlaps or gaps resulting from two or more different surveys of the same area, this may also include an indication of canceled or suspended surveys.

Detailed highway map of Scott County. This is the front of the map showing the locations of highways, townships, lakes, rivers, etc...