The North Carolina State and County Boundary vector polygon data provides location information for North Carolina State and County Boundary lines derived from the best available survey and/or Geographic Information System (GIS) data. Sources for information are the North Carolina Geodetic Survey (NCGS), NC Department of Transportation (NCDOT), United States Geological Survey (USGS), and field surveys conducted by licensed surveyors in North Carolina and neighboring states that have been approved and recorded in their respective counties. North Carolina Geodetic Survey assists counties on a cooperative basis (NC General Statute 153A-18) in defining and monumenting the location of uncertain or disputed boundaries as established by law. Some counties have completed boundary surveys for at least a portion of their county boundary. However, the majority of county boundaries have not been surveyed and are represented by the best currently available data from GIS sources, including NCDOT county maps (which originally came from the USGS) and updated county parcel maps.

The 2022 cartographic boundary KMLs are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. County subdivisions are the primary divisions of counties and their equivalent entities for the reporting of Census Bureau data. They include legally-recognized minor civil divisions (MCDs) and statistical census county divisions (CCDs), and unorganized territories. In MCD states where no MCD exists or no MCD is defined, the Census Bureau creates statistical unorganized territories to complete coverage. The entire area of the United States, Puerto Rico, and the Island Areas are covered by county subdivisions. The generalized boundaries of legal MCDs are based on those as of January 1, 2022, as reported through the Census Bureau's Boundary and Annexation Survey (BAS). The generalized boundaries of all CCDs, delineated in 21 states, are based on those as reported as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2020 Census.

If you are looking for the authoritative NC County Boundary Dataset go here: https://ncdenr.maps.arcgis.com/home/item.html?id=9728285994804c8b9f20ce58bae45899This layer features all 100 counties without shorelines included. Attribute:CO_NAME: County NameCO_ABBR: County AbriviationACRES: Acers in each countiesRO: Regional Office that county falls withinContact:Melanie Williams

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. The primary legal divisions of most states are termed counties. In Louisiana, these divisions are known as parishes. In Alaska, which has no counties, the equivalent entities are the organized boroughs, city and boroughs, municipalities, and for the unorganized area, census areas. The latter are delineated cooperatively for statistical purposes by the State of Alaska and the Census Bureau. In four states (Maryland, Missouri, Nevada, and Virginia), there are one or more incorporated places that are independent of any county organization and thus constitute primary divisions of their states. These incorporated places are known as independent cities and are treated as equivalent entities for purposes of data presentation. The District of Columbia and Guam have no primary divisions, and each area is considered an equivalent entity for purposes of data presentation. The Census Bureau treats the following entities as equivalents of counties for purposes of data presentation: Municipios in Puerto Rico, Districts and Islands in American Samoa, Municipalities in the Commonwealth of the Northern Mariana Islands, and Islands in the U.S. Virgin Islands. The entire area of the United States, Puerto Rico, and the Island Areas is covered by counties or equivalent entities. The boundaries for counties and equivalent entities are as of January 1, 2017, primarily as reported through the Census Bureau's Boundary and Annexation Survey (BAS).

A hydrogeologic unit map was created for Wake County, North Carolina by grouping geologic map units from Clark and others, 2004 based on their water-bearing potential. The water-bearing potential of the units was determined from rock origin, composition, and texture as described in Daniel (1989) and Daniel and Payne (1990) for the Piedmont and Blue Ridge Provinces of North Carolina. A layer file is also included to provide the map symbology used in the report.

Percentage of Poverty data for North Carolina and all counties.

This Flood Insurance Study was produced through a cooperative partnership between the State of North Carolina and FEMA. The North Carolina Floodplain Mapping Program, through FEMA's Cooperating Technical State (CTS) Initiative, is conducting flood hazard analyses and producing updated, digital FIRM panels for all North Carolina communities. Additional information regarding the North Carolina Floodplain Mapping Program and the data collected during the mapping process are available at www.ncfloodmaps.com. The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to the earth's surface using the NC State Plane Coordinate System, North American Datum 1983, Units of Feet. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.

Thickness map of Peedee aquifer confining unit based on local driller's logs, well construction data, and previously published well data within Brunswick, New Hanover, and Pender counties.

This Flood Insurance Study was produced through a cooperative partnership between the State of North Carolina and FEMA. The North Carolina Floodplain Mapping Program, through FEMA's Cooperating Technical State (CTS) Initiative, is conducting flood hazard analyses and producing updated, digital FIRM panels for all North Carolina communities. Additional information regarding the North Carolina Floodplain Mapping Program and the data collected during the mapping process are available at www.ncfloodmaps.com. The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to the earth's surface using the NC State Plane Coordinate System, North American Datum 1983, Units of Feet. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.

This Flood Insurance Study was produced through a cooperative partnership between the State of North Carolina and FEMA. The North Carolina Floodplain Mapping Program, through FEMA's Cooperating Technical State (CTS) Initiative, is conducting flood hazard analyses and producing updated, digital FIRM panels for all North Carolina communities. Additional information regarding the North Carolina Floodplain Mapping Program and the data collected during the mapping process are available at http://www.ncfloodmaps.com. The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to the earth's surface using the NC State Plane Coordinate System, North American Datum 1983, Units of Feet. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.

Spatial Dataset used to display Places of Worship in Mecklenburg County, North Carolina.

© Data is collected and maintained by The Charlotte Mecklenburg Planning Department. This layer is a component of Dynamic_ISP_DataRemap.

Geospatial data about Guilford County, NC County Line. Export to CAD, GIS, PDF, CSV and access via API.

Thickness map of Castle Hayne confining unit based on local driller's logs, well construction data, and previously published well data within Brunswick, New Hanover, and Pender counties.

Historical population as enumerated and corrected from 1790 through 2020. North Carolina was one of the 13 original States and by the time of the 1790 census had essentially its current boundaries. The Census is mandated by the United States Constitution and was first completed for 1790. The population has been counted every ten years hence, with some limitations. In 1790 census coverage included most of the State, except for areas in the west, parts of which were not enumerated until 1840. The population for 1810 includes Walton County, enumerated as part of Georgia although actually within North Carolina. Historical populations shown here reflect the population of the respective named county and not necessarily the population of the area of the county as it was defined for a particular census. County boundaries shown in maps reflect boundaries as defined in 2020. Historic boundaries for some counties may include additional geographic areas or may be smaller than the current geographic boundaries. Notes below list the county or counties with which the population of a currently defined county were enumerated historically (Current County: Population counted in). The current 100 counties have been in place since the 1920 Census, although some modifications to the county boundaries have occurred since that time. For historical county boundaries see: Atlas of Historical County Boundaries Project (newberry.org)County Notes: Note 1: Total for 1810 includes population (1,026) of Walton County, reported as a Georgia county but later determined to be situated in western North Carolina. Total for 1890 includes 2 Indians in prison, not reported by county. Note 2: Alexander: *Iredell, Burke, Wilkes. Note 3: Avery: *Caldwell, Mitchell, Watauga. Note 4: Buncombe: *Burke, Rutherford; see also note 22. Note 5: Caldwell: *Burke, Wilkes, Yancey. Note 6: Cleveland: *Rutherford, Lincoln. Note 7: Columbus: *Bladen, Brunswick. Note 8: Dare: *Tyrrell, Currituck, Hyde. Note 9: Hoke: *Cumberland, Robeson. Note 10: Jackson: *Macon, Haywood. Note 11: Lee: *Moore, Chatham. Note 12: Lenoir: *Dobbs (Greene); Craven. Note 13: McDowell: *Burke, Rutherford. Note 14: Madison: *Buncombe, Yancey. Note 15: Mitchell: *Yancey, Watauga. Note 16: Pamlico: *Craven, Beaufort. Note 17: Polk: *Rutherford, Henderson. Note 18: Swain: *Jackson, Macon. Note 19: Transylvania: *Henderson, Jackson. Note 20: Union: *Mecklenburg, Anson. Note 21: Vance: *Granville, Warren, Franklin. Note 22: Walton: Created in 1803 as a Georgia county and reported in 1810 as part of Georgia; abolished after a review of the State boundary determined that its area was located in North Carolina. By 1820 it was part of Buncombe County. Note 23: Watauga: *Ashe, Yancey, Wilkes; Burke. Note 24: Wilson: *Edgecombe, Nash, Wayne, Johnston. Note 25: Yancey: *Burke, Buncombe. Note 26: Alleghany: *Ashe. Note 27: Haywood: *Buncombe. Note 28: Henderson: *Buncombe. Note 29: Person: Caswell. Note 30: Clay: Cherokee. Note 31: Graham: Cherokee. Note 32: Harnett: Cumberland. Note 33: Macon: Haywood.

Note 34: Catawba: Lincoln. Note 35: Gaston: Lincoln. Note 36: Cabarrus: Mecklenburg.
Note 37: Stanly: Montgomery. Note 38: Pender: New Hanover. Note 39: Alamance: Orange.
Note 40: Durham: Orange, Wake. Note 41: Scotland: Richmond. Note 42: Davidson: Rowan. Note 43: Davie: Rowan.Note 44: Forsyth: Stokes. Note 45: Yadkin: Surry.
Note 46: Washington: Tyrrell.Note 47: Ashe: Wilkes. Part III. Population of Counties, Earliest Census to 1990The 1840 population of Person County, NC should be 9,790. The 1840 population of Perquimans County, NC should be 7,346.

NOTE: To download parcels by county DO NOT use the map. Instead:click the Download buttonclick Download parcels by county or all counties at oncescroll to the Direct Data Downloads section and download your dataThis digital geospatial dataset represents parcel boundaries with standard core attributes for a collection of parcel data from North Carolina county data producers and the Eastern Band of Cherokee Indians. The Integrated Cadastral Data Exchange project transformed source datasets from county data producers to create a standardized dataset with consistent attributes (fields). The individual standardized county datasets were aggregated into a single dataset. The aggregated parcel dataset includes all 100 counties in North Carolina plus lands of the Eastern Band of Cherokee Indians. The source geometry is retained as published by individual county data producers. This dataset includes attributes such as ownership, area in acres, assessed value, and other core cadastral attributes. Web services have both polygons (parcel boundaries) and points representing each property, placed at or near the geometric center, with the same set of attributes.See the NC OneMap parcels page for more information.

Population Estimate, Total, Hispanic or Latino (5-year estimate) in Brunswick County, NC was 8037.00000 Persons in January of 2023, according to the United States Federal Reserve. Historically, Population Estimate, Total, Hispanic or Latino (5-year estimate) in Brunswick County, NC reached a record high of 8037.00000 in January of 2023 and a record low of 3694.00000 in January of 2009. Trading Economics provides the current actual value, an historical data chart and related indicators for Population Estimate, Total, Hispanic or Latino (5-year estimate) in Brunswick County, NC - last updated from the United States Federal Reserve on July of 2025.

Geospatial data about Alexander County, North Carolina County Zoning. Export to CAD, GIS, PDF, CSV and access via API.

This layer represents county outlines for the state of North Carolina. The counties are stored as polygons.

Broadband Serviceable Locations (BSLs) that are eligible for funding through the NC Completing Access to Broadband (CAB) Program. Eligible locations are determined by analyzing the availability of broadband as reported by internet providers to the Federal Communications Commission (FCC) through their Broadband Data Collection (BDC). Locations are categorized into service levels in the data as:No Service – Locations with no reported service from Fiber, Cable, DSL, Licensed Fixed Wireless, or Licensed-by-Rule Fixed Wireless providers at any speed.Unserved Locations – Locations without access to internet service of at least 25mb/s download and 3mb/s upload speeds (25/3) and with low latency. Locations which are only served by DSL, Licensed-by-Rule Terrestrial Fixed Wireless, Unlicensed Fixed Wireless, or Licensed Fixed Wireless over mobile networks at any speed are also considered unserved.Underserved Locations – Locations with access to internet service of at least 25mb/s download and 3mb/s upload speeds, but less than 100mb/s Download and 20mb/s Upload speeds (100/20). Locations with service greater than 25/3 but are served with technology other than Cable and Fiber are also considered underserved.Participating counties may choose to prioritize certain geographic areas, within its county geographic boundaries, as areas to receive priority for CAB project deployments. Those counties that have prioritized certain locations for CAB applications will have those rankings listed in the "county_priority_rank" field in the data table with values of 1 being the highest priority locations, 2 being the next highest priority locations, and so on. Locations with a value of NULL have not been prioritized by the county. A county with all locations containing a value of NULL have either not become active projects or have not prioritized any areas in the respective county.

The Cumberland County GIS Data Viewer provides the general public with parcel, zoning, hydrology, soils, utilities and topographic data. You can search for a specific address, street name, parcel number (PIN), or by the owner's name.