This file contains the digital vector boundaries for Regions in England as at December 2024.The boundaries available are: (BFC) Full resolution - clipped to the coastline (Mean High Water mark).Contains both Ordnance Survey and ONS Intellectual Property Rights.REST URL of Feature Access Service – https://services1.arcgis.com/ESMARspQHYMw9BZ9/arcgis/rest/services/Regions_December_2024_Boundaries_EN_BFC/FeatureServerREST URL of WFS Server –https://dservices1.arcgis.com/ESMARspQHYMw9BZ9/arcgis/services/Regions_December_2024_Boundaries_EN_BFC/WFSServer?service=wfs&request=getcapabilitiesREST URL of Map Server –https://services1.arcgis.com/ESMARspQHYMw9BZ9/arcgis/rest/services/Regions_December_2024_Boundaries_EN_BFC/MapServer

A PDF map showing the Output Areas in the West Midlands Region of England as at December 2011. (File Size - 26 MB)

This file contains the digital vector boundaries for regions in England as at 31 December 2015. The boundaries are full resolution - extent of the realm (usually this is the Mean Low Water mark but in some cases boundaries extend beyond this to include off shore islands). Contains both Ordnance Survey and ONS Intellectual Property Rights. REST URL of ArcGIS for INSPIRE View Service – https://services1.arcgis.com/ESMARspQHYMw9BZ9/arcgis/rest/services/Regions_(December_2015)_FEB_in_England/MapServerREST URL of ArcGIS for INSPIRE Feature DownloadService – https://dservices1.arcgis.com/ESMARspQHYMw9BZ9/arcgis/services/Regions_December_2015_Full_Extent_Boundaries_in_England/WFSServer?service=wfs&request=getcapabilitiesREST URL of Feature Access Service – https://services1.arcgis.com/ESMARspQHYMw9BZ9/arcgis/rest/services/Regions_December_2015_FEB_in_England_2022/FeatureServer

🇬🇧 영국

This data is experimental, see the ‘Access Constraints or User Limitations’ section for more details. This dataset has been generalised to 10 metre resolution where it is still but the space needed for downloads will be improved.A set of UK wide estimated travel area geometries (isochrones), from Output Area (across England, Scotland, and Wales) and Small Area (across Northern Ireland) population-weighted centroids. The modes used in the isochrone calculations are limited to public transport and walking. Generated using Open Trip Planner routing software in combination with Open Street Maps and open public transport schedule data (UK and Ireland).The geometries provide an estimate of reachable areas by public transport and on foot between 7:15am and 9:15am for a range of maximum travel durations (15, 30, 45 and 60 minutes). For England, Scotland and Wales, these estimates were generated using public transport schedule data for Tuesday 15th November 2022. For Northern Ireland, the date used is Tuesday 6th December 2022.The data is made available as a set of ESRI shape files, in .zip format. This corresponds to a total of 18 files; one for Northern Ireland, one for Wales, twelve for England (one per English region, where London, South East and North West have been split into two files each) and four for Scotland (one per NUTS2 region, where the ‘North-East’ and ‘Highlands and Islands’ have been combined into one shape file, and South West Scotland has been split into two files).The shape files contain the following attributes. For further details, see the ‘Access Constraints or User Limitations’ section:AttributeDescriptionOA21CD or SA2011 or OA11CDEngland and Wales: The 2021 Output Area code.Northern Ireland: The 2011 Small Area code.Scotland: The 2011 Output Area code.centre_latThe population-weighted centroid latitude.centre_lonThe population-weighted centroid longitude.node_latThe latitude of the nearest Open Street Map “highway” node to the population-weighted centroid.node_lonThe longitude of the nearest Open Street Map “highway” node to the population-weighted centroid.node_distThe distance, in meters, between the population-weighted centroid and the nearest Open Street Map “highway” node.stop_latThe latitude of the nearest public transport stop to the population-weighted centroid.stop_lonThe longitude of the nearest public transport stop to the population-weighted centroid.stop_distThe distance, in metres, between the population-weighted centroid and the nearest public transport stop.centre_inBinary value (0 or 1), where 1 signifies the population-weighted centroid lies within the Output Area/Small Area boundary. 0 indicates the population-weighted centroid lies outside the boundary.node_inBinary value (0 or 1), where 1 signifies the nearest Open Street Map “highway” node lies within the Output Area/Small Area boundary. 0 indicates the nearest Open Street Map node lies outside the boundary.stop_inBinary value (0 or 1), where 1 signifies the nearest public transport stop lies within the Output Area/Small Area boundary. 0 indicates the nearest transport stop lies outside the boundary.iso_cutoffThe maximum travel time, in seconds, to construct the reachable area/isochrone. Values are either 900, 1800, 2700, or 3600 which correspond to 15, 30, 45, and 60 minute limits respectively.iso_dateThe date for which the isochrones were estimated, in YYYY-MM-DD format.iso_typeThe start point from which the estimated isochrone was calculated. Valid values are:from_centroid: calculated using population weighted centroid.from_node: calculated using the nearest Open Street Map “highway” node.from_stop: calculated using the nearest public transport stop.no_trip_found: no isochrone was calculated.geometryThe isochrone geometry.iso_hectarThe area of the isochrone, in hectares.Access constraints or user limitations.These data are experimental and will potentially have a wider degree of uncertainty. They remain subject to testing of quality, volatility, and ability to meet user needs. The methodologies used to generate them are still subject to modification and further evaluation.These experimental data have been published with specific caveats outlined in this section. The data are shared with the analytical community with the purpose of benefitting from the community's scrutiny and in improving the quality and demand of potential future releases. There may be potential modification following user feedback on both its quality and suitability.For England and Wales, where possible, the latest census 2021 Output Area population weighted centroids were used as the starting point from which isochrones were calculated.For Northern Ireland, 2011 Small Area population weighted centroids were used as the starting point from which isochrones were calculated. Small Areas and Output Areas contain a similar number of households within their boundaries. 2011 data was used because this was the most up-to-date data available at the time of generating this dataset. Population weighted centroids for Northern Ireland were calculated internally but may be subject to change - in the future we aim to update these data to be consistent with Census 2021 across the UK.For Scotland, 2011 Output Area population-weighted centroids were used as the starting point from which isochrones were calculated. 2011 data was used because this was the most up-to-date data available at the time of work.The data for England, Scotland and Wales are released with the projection EPSG:27700 (British National Grid).The data for Northern Ireland are released with the projection EPSG:29902 (Irish Grid).The modes used in the isochrone calculations are limited to public transport and walking. Other modes were not considered when generating this data.A maximum value of 1.5 kilometres walking distance was used when generating isochrones. This approximately represents typical walking distances during a commute (based on Department for Transport/Labour Force Survey data and Travel Survey for Northern Ireland technical reports).When generating Northern Ireland data, public transport schedule data for both Northern Ireland and Republic of Ireland were used.Isochrone geometries and calculated areas are subject to public transport schedule data accuracy, Open Trip Planner routing methods and Open Street Map accuracy. The location of the population-weighted centroid can also influence the validity of the isochrones, when this falls on land which is not possible or is difficult to traverse (e.g., private land and very remote locations).The Northern Ireland public transport data were collated from several files, and as such required additional pre-processing. Location data are missing for two bus stops. Some services run by local public transport providers may also be missing. However, the missing data should have limited impact on the isochrone output. Due to the availability of Northern Ireland public transport data, the isochrones for Northern Ireland were calculated on a comparable but slight later date of 6th December 2022. Any potential future releases are likely to contained aligned dates between all four regions of the UK.In cases where isochrones are not calculable from the population-weighted centroid, or when the calculated isochrones are unrealistically small, the nearest Open Street Map ‘highway’ node is used as an alternative starting point. If this then fails to yield a result, the nearest public transport stop is used as the isochrone origin. If this also fails to yield a result, the geometry will be ‘None’ and the ‘iso_hectar’ will be set to zero. The following information shows a further breakdown of the isochrone types for the UK as a whole:from_centroid: 99.8844%from_node: 0.0332%from_stop: 0.0734%no_trip_found: 0.0090%The term ‘unrealistically small’ in the point above refers to outlier isochrones with a significantly smaller area when compared with both their neighbouring Output/Small Areas and the entire regional distribution. These reflect a very small fraction of circumstances whereby the isochrone extent was impacted by the centroid location and/or how Open Trip Planner handled them (e.g. remote location, private roads and/or no means of traversing the land). Analysis showed these outliers were consistently below 100 hectares for 60-minute isochrones. Therefore, In these cases, the isochrone point of origin was adjusted to the nearest node or stop, as outlined above.During the quality assurance checks, the extent of the isochrones was observed to be in good agreement with other routing software and within the limitations stated within this section. Additionally, the use of nearest node, nearest stop, and correction of ‘unrealistically small areas’ was implemented in a small fraction of cases only. This culminates in no data being available for 8 out of 239,768 Output/Small Areas.Data is only available in ESRI shape file format (.zip) at this release.https://www.openstreetmap.org/copyright

This file contains the names and codes for regions (former GORs) in England as at 31 December 2016. (File Size - 16 KB)REST URL of Feature Access Service – https://services1.arcgis.com/ESMARspQHYMw9BZ9/arcgis/rest/services/Regions_Dec_2016_Names_and_Codes_in_England_2022/FeatureServer

A PDF map showing the lower layer super output areas in the London Region of England as at December 2011. (File Size - 37 MB)

A PDF map showing the middle layer super output areas in the South East Region of England as at December 2011. (File Size - 26 MB)

The maps below show the population of the UK in 2022, at country, region, county and postcode sector level. The maps also provide information about the relative wealth, education and employment of people living in different areas.This map shows different countries of the UK.

This layer of the Map based index (GeoIndex) shows the location of available UTM (Universal Transverse Mercator) series 1:250000 geological maps. These maps display Bedrock, Quaternary (Superficial deposits) geology of the offshore areas and Seabed Sediments of the UK landmass and offshore regions. The different versions are normally published as separate maps for land areas, but these may be combined on a single map for offshore areas. Maps are normally available in flat and folded format. The UTM Series (Universal Transverse Mercator projection) maps cover an area of 1deg. latitude by 2deg. longitude.

Government Office (GO) Regions in Shape format derived from OS Boundary-Line data. The Regions were created from Digimap datasets downloaded from Boundary Download of 'County' Boundaries and the 'District Borough Unitary Authority' boundaries'. These were loaded into ArcMap as Shape files and using the map at http://www.gos.gov.uk/common/docs/239408/442543 (which is accessed from http://www.gos.gov.uk/aboutusnat/) as the guide the Regions were identified and merged together from individual Counties, Unitary Authorites and Metropoliatain Districts. The Revision Date of the OS Boundary-Line data is April 2008. GIS vector data. This dataset was first accessioned in the EDINA ShareGeo Open repository on 2010-07-20 and migrated to Edinburgh DataShare on 2017-02-21.

A PDF map showing the middle layer super output areas in the London Region of England as at December 2011. (File Size - 36 MB)

A PDF map showing the Rural Urban Classification (2011) of the LSOAs in the East Midlands Region. (File Size - 2 MB)

A PDF map that shows the health areas in England and Wales as at April 2013. The map shows the health geographies (clinical commissioning group, NHS area teams, and NHS commissioning regions) that became operative in England as at April 2013 and the local health boards in Wales. (File Size - 4 MB)

A PDF map showing the Rural Urban Classification (2011) of the MSOAs in the South East Region. (File Size - 1 MB)

A PDF map showing the lower layer super output areas in the North East Region of England as at December 2011. (File Size - 15 MB)

This is a thin-sheet model of the regional geoelectric field covering the UK and Ireland, which is a combination of the response of the ground conductivity in a region with the spatial and temporal measurements of the rate of change of the horizontal components of the magnetic field. Output from the BGS Space Weather Impact on Ground-based Systems (SWIGS)

In 2022, London had a gross domestic product of over 508 billion British pounds, by far the most of any region of the United Kingdom. The region of South East England which surrounds London had the second-highest GDP in this year, at over 341 billion pounds. North West England, which includes the major cities of Manchester and Liverpool, had the third-largest GDP among UK regions, at approximately 223.5 billion pounds. Levelling Up the UK London’s economic dominance of the UK can clearly be seen when compared to the other regions of the country. In terms of GDP per capita, the gap between London and the rest of the country is striking, standing at 57,338 pounds per person in the UK capital, compared with just over 33,593 pounds in the rest of the country. To address the economic imbalance, successive UK governments have tried to implement "levelling-up policies", which aim to boost investment and productivity in neglected areas of the country. The success of these programs going forward may depend on their scale, as it will likely take high levels of investment to reverse economic neglect regions have faced in the recent past. Overall UK GDP The gross domestic product for the whole of the United Kingdom amounted to 2.56 trillion British pounds in 2024. During this year, GDP grew by 0.9 percent, following a growth rate of 0.4 percent in 2023. Due to the overall population of the UK growing faster than the economy, however, GDP per capita in the UK fell in both 2023 and 2024. Nevertheless, the UK remains one of the world’s biggest economies, with just five countries (the United States, China, Japan, Germany, and India) having larger economies. It is it likely that several other countries will overtake the UK economy in the coming years, with Indonesia, Brazil, Russia, and Mexico all expected to have larger economies than Britain by 2050.

This file contains the digital vector boundaries for Regions in England, as at 2016. The boundaries are generalised (20m) - clipped to the coastline (Mean High Water mark). Contains both Ordnance Survey and ONS Intellectual Property Rights.REST URL of ArcGIS for INSPIRE View Service – https://services1.arcgis.com/ESMARspQHYMw9BZ9/arcgis/rest/services/Regions_(December_2016)_GCB_in_England/MapServerREST URL of ArcGIS for INSPIRE Feature DownloadService – https://dservices1.arcgis.com/ESMARspQHYMw9BZ9/arcgis/services/Regions_December_2016_Generalised_Clipped_Boundaries_in_England/WFSServer?service=wfs&request=getcapabilitiesREST URL of Feature Access Service – https://services1.arcgis.com/ESMARspQHYMw9BZ9/arcgis/rest/services/Regions_December_2016_GCB_in_England_2022/FeatureServer