Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data are current as of April 2001.

A 24"x28" PDF map of Oil and Gas wells and pipelines in Denton County, provided by the Railroad Commission of Texas.

This feature dataset contains oil and gas information for the BRADD region.Thumbnail Image: By Eric Kounce TexasRaiser - Located south of Midland, Texas, Public Domain, https://commons.wikimedia.org/w/index.php?curid=4639595

This map shows the structural configuration on the top of the Cotton Valley Group in feet below sea level. The map was produced by calculating the difference between a datum at the land surface (either the kelly bushing elevation or the ground surface elevation) and the reported depth of the Cotton Valley Group. This resulted in 10,687 wells for which locations were available. After deleting the wells with obvious data problems, a total of 10,504 wells were used to generate the map. The data are provided as both lines and polygons, and the proprietary wells that penetrate the top of the Cotton Valley Group are graphically displayed as quarter-mile cells. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data are current as of April 2001.

This isopach map shows the thickness of the interval from the top of the Travis Peak or Hosston Formations to the top of the Cotton Valley Group. The map was produced by first subtracting the values of the top of the Travis Peak or Hosston from those of the top of the Cotton Valley Group. This resulted in a data set of 8,585 values for which locations were available. After deleting the wells with obvious data problems, a total of 8414 wells were used to generate the map. The data are provided as both lines and polygons, and the proprietary wells that penetrate this interval are graphically displayed as quarter-mile cells.

The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data are current as of April 2001.

Cell maps for each Miocene and Plio-Pleistocene oil and gas assessment unit were created by the USGS to illustrate the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data are current as of 2005.

Additionally, cell maps were made that show the distribution of producing and non-producing Miocene wells throughout the Gulf Coast region, regardless of assessment unit. These maps consist of wells for which only an 'undivided Miocene' age is assigned (au47014ucg), and a summary cell map that represents all Miocene wells (au47014cg). These maps are intended to illustrate the total amount of drilling in Miocene rocks in the Gulf Coast region, whether or not we can assign an age of Lower, Middle, or Upper Miocene to the tested or producing interval.

This isopach map shows the thickness of the interval from the top of the Cotton Valley Group to the top of the Smackover Formation. It was necessary to contour this expanded interval, instead of just the upper part of the Cotton Valley Group, because of the limited availability of data. Ideally, just the part of the Cotton Valley Group above the Bossier Shale would have been contoured, but there are a limited number of Bossier picks in the database, and many of the Bossier picks are not at a consistent stratigraphic break (J.L. Ridgley, oral commun., 2002). Data for units below the Bossier, such as the Haynesville or Buckner Formations, are also limited on a regional basis. The Smackover Formation is the first unit below the top of the Cotton Valley that has abundant data available on a regional level. The data are provided as both lines and polygons, and the proprietary wells that penetrate this interval are graphically displayed as quarter-mile cells.

The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data are current as of April 2001.

This map shows the structural configuration of the top of the Travis Peak or Hosston Formations in feet below sea level. The map was produced by calculating the difference between a datum at the land surface (either the Kelly bushing elevation or the ground surface elevation) and the reported depth of the Travis Peak or Hosston. This resulted in 18,941 wells for which locations were available. After deleting the wells with obvious data problems, a total of 18,933 wells were used for the map. The data are provided as both lines and polygons, and the proprietary wells that penetrate the top of the Travis Peak or Hosston Formations are graphically displayed as quarter-mile cells. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying propriet ...

The depth to top of the Wilcox Group is contoured from location and top information derived from the Petroleum Information (PI) Wells database. The depth to Wilcox map represents the tops found in the database with the addition of surface geology from USGS maps and field data. The veracity of the PI Wells database is being checked by comparison to published cross sections and geologic maps. Interpretation of the depth to Wilcox and apparent thickness maps along with published measured sections and cross sections indicates that portions of Texas, Louisiana, Mississippi and Alabama contain broad areas where a 20 to 40 foot net thickness of lignite and coal occur at shallow depths. The thicker coal zones are attributed to growth faulting or rift zones influencing peat deposition. The depth to Wilcox map shows several areas where dome-like uplifts and bench-like coal-bearing rock are buried to depths less than 5,000 ft.

Cell maps for each Paleogene oil and gas assessment unit were created by the USGS to illustrate the degree of exploration, type of production, and distribution of production in an assessment unit or province. Cell maps were also created to illustrate the distribution of dry wildcat wells for each assessment unit. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data are current as of 2004.

The Texas Water Development Board (TWDB) Groundwater Database (GWDB) contains information on selected water wells, springs, oil/gas tests (that were originally intended to be or were converted to water wells), water levels, and water quality to gain representative information about aquifers in Texas to support water planning from a local to a more regional perspective. This is a scientific database, not a registry of every well drilled in the state.

Cell maps for each oil and gas assessment unit were created by the USGS to illustrate the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data are current as of 2003.

Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data were current as of April 2003 when the cell maps were created in 2003.

The Apparent Wilcox Group thickness maps are contoured from location and top information derived from the Petroleum Information (PI) Wells database. The Wilcox apparent thickness map was constructed by searching for Wilcox and Midway Group tops. Apparent thickness is computed by subtracting Midway top from the Wilcox top. Geographic control is superimposed on the maps from USGS state line, county, elevation and other data files. The veracity of the PI Wells database is being checked by comparison to published cross sections and geologic maps.

Interpretation of the depth to Wilcox and apparent thickness maps along with published measured sections and cross sections indicates that portions of Texas, Louisiana, Mississippi and Alabama contain broad areas where a 20 to 40 foot net thickness of lignite and coal occur at shallow depths. The thicker coal zones are attributed to growth faulting or rift zones influencing peat deposition. The depth to Wilcox map shows several areas where dome-like uplifts and bench-like coal-bearing rock are buried to depths less than 5,000 ft.