This map of Minnesota cities, townships, and counties was published by MnGeo in January 2019. The primary data set for the map is the "Cities, Townships, and Unorganized Territories" (MnCTU) data maintained by the Minnesota Department of Transportation. Other reference data on the map include County Seats and Other Cities, County Boundaries, Interstate, US Trunk, and State Trunk Highways, Major Rivers, Lakes, County and State Boundaries. The download is a PDF file with embedded layers that can be printed at E-scale (36" x 48").

The TRS digital data set represents the Township, Range, and Section boundaries of the state. Beginning in the late 1840s, the federal government began surveying Minnesota as part of the Public Land Survey System (PLSS). The resulting network of land survey lines divided the state into townships, ranges, sections, quarter sections, quarter-quarter sections and government lots, and laid the groundwork for contemporary land ownership patterns.

The township, range and section boundaries were digitized at MnGeo (formerly known as the Land Management Information Center - LMIC) from stable base mylars of the U.S. Geological Survey (USGS) 30-minute latitude by 60-minute longitude map series (1:100,000-scale). All survey lines were extended across water bodies despite the fact that U.S. Geological Survey base maps depict them only on land. This addition allows all sections and townships to be represented as closed areas (polygons) ensuring that township and range location can be determined for any point in the state. It also means that the data set is not affected if lake levels change over time.

This is a polygon dataset for the township boundaries within Carver County derived from the County Surveryor's base map.

A downloadable, printable 8.5 x 11 inch PDF map of Watertown Township and surrounding area.

NCED is currently involved in researching the effectiveness of anaglyph maps in the classroom and are working with educators and scientists to interpret various Earth-surface processes. Based on the findings of the research, various activities and interpretive information will be developed and available for educators to use in their classrooms. Keep checking back with this website because activities and maps are always being updated. We believe that anaglyph maps are an important tool in helping students see the world and are working to further develop materials and activities to support educators in their use of the maps.

This website has various 3-D maps and supporting materials that are available for download. Maps can be printed, viewed on computer monitors, or projected on to screens for larger audiences. Keep an eye on our website for more maps, activities and new information. Let us know how you use anaglyph maps in your classroom. Email any ideas or activities you have to ncedmaps@umn.edu

Anaglyph paper maps are a cost effective offshoot of the GeoWall Project. Geowall is a high end visualization tool developed for use in the University of Minnesota's Geology and Geophysics Department. Because of its effectiveness it has been expanded to 300 institutions across the United States. GeoWall projects 3-D images and allows students to see 3-D representations but is limited because of the technology. Paper maps are a cost effective solution that allows anaglyph technology to be used in classroom and field-based applications.

Maps are best when viewed with RED/CYAN anaglyph glasses!

A note on downloading: "viewable" maps are .jpg files; "high-quality downloads" are .tif files. While it is possible to view the latter in a web-browser in most cases, the download may be slow. As an alternative, try right-clicking on the link to the high-quality download and choosing "save" from the pop-up menu that results. Save the file to your own machine, then try opening the saved copy. This may be faster than clicking directly on the link to open it in the browser.

World Map: 3-D map that highlights oceanic bathymetry and plate boundaries.

Continental United States: 3-D grayscale map of the Lower 48.

Western United States: 3-D grayscale map of the Western United States with state boundaries.

Regional Map: 3-D greyscale map stretching from Hudson Bay to the Central Great Plains. This map includes the Western Great Lakes and the Canadian Shield.

Minnesota Map: 3-D greyscale map of Minnesota with county and state boundaries.

Twin Cities: 3-D map extending beyond Minneapolis and St. Paul.

Twin Cities Confluence Map: 3-D map highlighting the confluence of the Mississippi and Minnesota Rivers. This map includes most of Minneapolis and St. Paul.

Minneapolis, MN: 3-D topographical map of South Minneapolis.

Bassets Creek, Minneapolis: 3-D topographical map of the Bassets Creek watershed.

North Minneapolis: 3-D topographical map highlighting North Minneapolis and the Mississippi River.

St. Paul, MN: 3-D topographical map of St. Paul.

Western Suburbs, Twin Cities: 3-D topographical map of St. Louis Park, Hopkins and Minnetonka area.

Minnesota River Valley Suburbs, Twin Cities: 3-D topographical map of Bloomington, Eden Prairie and Edina area.

Southern Suburbs, Twin Cities: 3-D topographical map of Burnsville, Lakeville and Prior Lake area.

Southeast Suburbs, Twin Cities: 3-D topographical map of South St. Paul, Mendota Heights, Apple Valley and Eagan area.

Northeast Suburbs, Twin Cities: 3-D topographical map of White Bear Lake, Maplewood and Roseville area.

Northwest Suburbs, Mississippi River, Twin Cities: 3-D topographical map of North Minneapolis, Brooklyn Center and Maple Grove area.

Blaine, MN: 3-D map of Blaine and the Mississippi River.

White Bear Lake, MN: 3-D topographical map of White Bear Lake and the surrounding area.

Maple Grove, MN: 3-D topographical mmap of the NW suburbs of the Twin Cities.

Public Parcels - Metro CTUsThis web map was created by Metro Transit's Transit Oriented Development (TOD) Office to showcase the newly expanded public parcel data in relation to existing and planned transit facilities across the Twin Cities Metropolitan Area. As of August, 2019, the parcels can also be viewed in relation to Federally approved Opportunity Zones. More information on the new US Department of Treasury Opportunity Zone Program can be found here. The purpose of the public parcel data is to increase awareness of the location and quantity of publicly owned lands at all levels of government. The Q-1 2020 dataset now includes more than 35,000 parcels from across 128 cities, townships, and unorganized territories (CTUs). These parcels are further classified and displayed by eight broad ownership or administrative categories. Users can view, analyze, share, and research publicly-owned lands that may be good candidates for TOD or some other higher/better use.The purpose of the original pilot project was to increase awareness of publicly owned parcel locations relative to Metro-area transit facilities and facilitate TOD analyses. While the current geographic extent of the data has been greatly expanded, the purpose remains the same; to raise awareness of publicly owned land for the highest & best use.For those with desktop GIS software, the Public Parcel shapefile and/or geodatabase can be downloaded here: https://gisdata.mn.gov/dataset/us-mn-state-metc-plan-public-parcels-metro-ctus

Cartographic Details: Scale approximately 1:1,530,000. Description based on: 1932 sheet. Each sheet lists the Commissioner of highways and the Chief Engineer. On verso: Distance tables for various cities in Minnesota. Scale approximately 1:1,530,000. Minnesota Transportation Maps

description: This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. These are the corners of the PLSS. This data set contains summary information about the coordinate location and reliability of corner coordinate information.; abstract: This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. These are the corners of the PLSS. This data set contains summary information about the coordinate location and reliability of corner coordinate information.

Exterior boundary, Annexation boundary, and County boundary coverages are examined to remove all overshoots, unwanted intersections; insure polygons are closed; and to see that there are no missing or duplicate polygon labels. Each symbolic layer is individually examined for completeness. There is no line duplication in exterior or annexation coverages. MCD's with detached or non-contiguous units (polygons) have the same polygon link/label code in each of their units. Completeness in the checking process is examined through the examination and comparison of all detail collected by County Staff. Sources used included: City Clerks, County Auditor's Office, Washington County Historical Courthouse, MN State Historical Society, Secretary of State, Minnesota Municipal Board, and MNDOT. https://www.co.washington.mn.us/1609/Municipal-Boundaries

These shapefiles of lakes, streams, wetlands, river bottoms, and the Mississippi River represent the hydrological landscape of Minneapolis and St. Paul as recorded in the original public land survey conducted between 1848 and 1858. The hydrologic features were digitized from scanned, georeferenced 1:24000 maps during the 2017 Faculty Research Sprint held at the University of Minnesota.

description: This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. These are areas of water that are defined from meander lines of the PLSS and GLO surveys. These are not the official representations of coast or water lines and are representations of the lines marked by the survey along the boundaries of meandered water at the time of survey.; abstract: This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. These are areas of water that are defined from meander lines of the PLSS and GLO surveys. These are not the official representations of coast or water lines and are representations of the lines marked by the survey along the boundaries of meandered water at the time of survey.

Summary Carver County City and Township Boundary file.

Description This is a polygon dataset for the city and township boundaries within Carver County derived from the County Surveryor's base map.

description: This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. The conflicted areas feature class is a depiction of known overlaps or gaps resulting from two or more different surveys of the same area, this may also include an indication of canceled or suspended surveys.; abstract: This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. The conflicted areas feature class is a depiction of known overlaps or gaps resulting from two or more different surveys of the same area, this may also include an indication of canceled or suspended surveys.

description: This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. The second division of the PLSS is quarter, quarter-quarter, sixteenth or government lot division of the PLSS. The second and third divisions are combined into this feature class as an intentional de-normalization of the PLSS hierarchical data. The polygons in this feature class represent the smallest division to the sixteenth that has been defined for the first division. For example In some cases sections have only been divided to the quarter. Divisions below the sixteenth are in the Special Survey or Parcel Feature Class. The second division of the PLSS is quarter, quarter-quarter, sixteenth or government lot division of the PLSS. The second and third divisions are combined into this feature class as an intentional de-normalization of the PLSS hierarchical data. The polygons in this feature class represent the smallest division to the sixteenth that has been defined for the first division. For example In some cases sections have only been divided to the quarter. Divisions below the sixteenth are in the Special Survey or Parcel Feature Class.; abstract: This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. The second division of the PLSS is quarter, quarter-quarter, sixteenth or government lot division of the PLSS. The second and third divisions are combined into this feature class as an intentional de-normalization of the PLSS hierarchical data. The polygons in this feature class represent the smallest division to the sixteenth that has been defined for the first division. For example In some cases sections have only been divided to the quarter. Divisions below the sixteenth are in the Special Survey or Parcel Feature Class. The second division of the PLSS is quarter, quarter-quarter, sixteenth or government lot division of the PLSS. The second and third divisions are combined into this feature class as an intentional de-normalization of the PLSS hierarchical data. The polygons in this feature class represent the smallest division to the sixteenth that has been defined for the first division. For example In some cases sections have only been divided to the quarter. Divisions below the sixteenth are in the Special Survey or Parcel Feature Class.

This dataset contains Orderly Annexation Areas within Scott County. The Orderly Annexation Area boundaries reflect areas mapped in annexation agreements between adjacent townships and cities.

Author: R Biel, educator, Minnesota Alliance for Geographic EducationGrade/Audience: high schoolResource type: lessonSubject topic(s): urban geography, geographic thinkingRegion: united statesStandards: Minnesota Social Studies Standards

Standard 2. Geographic Inquiry is a process in which people ask geographic questions and gather, organize and analyze information to solve problems and plan for the future.

Standard 5. The characteristics, distribution and migration of human populations on the earth’s surface influence human systems (cultural, economic and political systems).

Standard 6. Geographic factors influence the distribution, functions, growth and patterns of cities and human settlements.Objectives: Students will be able to:

1. Identify site location reasons for cities to develop.
2. Define, map and explain “megalopolis”.Summary: Students will also identify reasons for the site locations of some U.S. cities and use maps to identify and plot their locations. They will identify the northeast megalopolis of the U.S. and determine what is a megalopolis.

Circulator routes and local transportation options within Washington County, MN.Twin Cities Metro Transit route data provided by Metropolitan Council.This map is used by the Transportation Finder application

The published representation of the various election related data layers. Including: Polling PlacesVoting Precincts - All current voting districts.Township & City Officals - Member of Township and City CouncilsCounty Commissioner Districts - Renville County has 5 districts for each of its commissioners: - District 1 includes 5 townships and the municipalities of Hector and Buffalo Lake- District 2 includes 5 townships and the municipalities of Morton, Franklin and Fairfax- District 3 includes 10 townships and the municipality of Bird Island- District 4 includes 1 township and the municipalities of Olivia and Danube- District 5 includes 6 townships and the municipalities of Sacred Heart and RenvilleSchool Board Members - All existing school districts in Renville County.State House Representatives - State House districts of Minnesota.State Senators - State Senators districts of Minnesota.US House Represtatives - United States House districts.US Senators - United States Senate districts.All layers correspond to each township and municipality or combination thereof in Renville County.Organized for consumption in desktop and web applications.

General_Land_Info_OlmstedCountyMNThe General Land Info Olmsted County MN map service provides dynamic base layers of land information within Olmsted County. The map service provices E911 Addresses, City Limits, Centerlines, Township and Section boundaires and the Parcels Composite, which contains a composite of several parcel types: land parcels, ROW (right-of-way) parcels, conodminiums, building units and manufactured homes.The Parcels and Addressing map service provides Olmsted County, MN addressing and land information related to tax parcels that includes current and historic addressing, subdivision and right-of-way plats, annexations and orderly annexation agreement areas, real property tax parcels and parcels by soil type, historic landmark properties. Projection: WGS_1984_Web_Mercator_Auxiliary_Sphere WKID: 3857 Authority:EPSG