This data set represents the extent, approximate location and type of wetlands and deepwater habitats in the United States and its Territories. These data delineate the areal extent of wetlands and surface waters as defined by Cowardin et al. (1979), which represents a biological definition of wetlands and deepwater habitats. There is no attempt to define the limits of proprietary jurisdiction of any Federal, State, or local government, or to establish the geographical scope of the regulatory programs of government agencies. Some wetland habitats may be under represented or excluded in certain areas because of the limitations of aerial imagery as the primary data source used to detect wetlands. These habitats include seagrasses or submerged aquatic vegetation that are found in the intertidal and subtidal zones of estuaries and near shore coastal waters and also some deepwater reef communities (coral or tuberficid worm reefs). These habitats, because of their depth and water clarity, go undetected by most aerial imagery. By policy, the Service also excludes certain types of "farmed wetlands" as may be defined by the Food Security Act or that do not coincide with the Cowardin et al. definition. Contact the Service's Regional Wetland Coordinator for additional information on what types of farmed wetlands are included on wetland maps. This dataset should be used in conjunction with the Wetlands_Project_Metadata layer, which contains project boundaries, specific wetlands mapping procedures and information on dates, scales and emulsion of imagery used to map the wetlands within specific project boundaries.

This data set represents the extent, approximate location and type of wetlands and deepwater habitats in the United States and its Territories. These data delineate the areal extent of wetlands and surface waters as defined by Cowardin et al. (1979). The National Wetlands Inventory - Version 2, Surface Waters and Wetlands Inventory was derived by retaining the wetland and deepwater polygons that compose the NWI digital wetlands spatial data layer and reintroducing any linear wetland or surface water features that were orphaned from the original NWI hard copy maps by converting them to narrow polygonal features. Additionally, the data are supplemented with hydrography data, buffered to become polygonal features, as a secondary source for any single-line stream features not mapped by the NWI and to complete segmented connections. Wetland mapping conducted in WA, OR, CA, NV and ID after 2012 and most other projects mapped after 2015 were mapped to include all surface water features and are not derived data. The linear hydrography dataset used to derive Version 2 was the U.S. Geological Survey's National Hydrography Dataset (NHD). Specific information on the NHD version used to derive Version 2 and where Version 2 was mapped can be found in the 'comments' field of the Wetlands_Project_Metadata feature class. Certain wetland habitats are excluded from the National mapping program because of the limitations of aerial imagery as the primary data source used to detect wetlands. These habitats include seagrasses or submerged aquatic vegetation that are found in the intertidal and subtidal zones of estuaries and near shore coastal waters. Some deepwater reef communities (coral or tuberficid worm reefs) have also been excluded from the inventory. These habitats, because of their depth, go undetected by aerial imagery. By policy, the Service also excludes certain types of "farmed wetlands" as may be defined by the Food Security Act or that do not coincide with the Cowardin et al. definition. Contact the Service's Regional Wetland Coordinator for additional information on what types of farmed wetlands are included on wetland maps. This dataset should be used in conjunction with the Wetlands_Project_Metadata layer, which contains project specific wetlands mapping procedures and information on dates, scales and emulsion of imagery used to map the wetlands within specific project boundaries.

Note that due to the quantity and complexity of the data there is scale dependent rendering enabled. The vector data only draws when zoomed in to 1:250,000 map scale or larger. To view the wetlands data at a smaller scale utilize the Wetlands Raster service (https://www.fws.gov/wetlandsmapservice/rest/services/Wetlands_Raster/ImageServer) to display generalized wetlands at all scales.. For specific questions or assistance please email wetlands_team@fws.gov.For more information visit: https://www.fws.gov/wetlands/index.htmlView Wetlands Data on the Wetlands Mapper at: https://www.fws.gov/wetlands/Data/Mapper.htmlWetlands Web Services are available at: https://www.fws.gov/wetlands/Data/Web-Map-Services.htmlWetlands Data available as a KML at: https://www.fws.gov/wetlands/Data/Google-Earth.htmlWetlands Data Downloads available at: https://www.fws.gov/wetlands/Data/Data-Download.htmlWetland Data Standards available at: https://www.fws.gov/wetlands/Data/Data-Standards.htmlWetland Codes available at: https://www.fws.gov/wetlands/Data/Wetland-Codes.htm

Please note that, due to the large size, the Informational Freshwater Wetland Mapping layer cannot be download in shapefile format.The Informational Freshwater Wetland Mapping layer is only intended to be used for informational purposes in identifying the general location and extent of freshwater wetland areas of any size throughout the state. Informational Freshwater Wetland Mapping is not regulatory.The Freshwater Wetlands Act changed in 2022 such that wetlands greater than 12.4 acres in size are regulated regardless of their mapping status. In addition to larger wetlands, the Freshwater Wetlands Act regulates smaller wetlands of “unusual importance” if they meet one of eleven criteria described in the law and regulation. While maps contained on the Environmental Resource Mapper provide information on the potential locations of wetlands, the only definitive way to determine if a particular parcel or property contains regulated wetlands outside the Adirondack Park is to request a jurisdictional determination through DEC’s website (https://dec.ny.gov/nature/waterbodies/wetlands/freshwater-wetlands-program).The Freshwater Wetlands Act regulates most development activities located in the wetland or within a regulated “adjacent area.” This adjacent area is a minimum of 100 feet but may be extended for a limited number of particularly sensitive wetlands. Not all activities in and near wetlands are regulated. There are many exempt activities that landowners may undertake without permits. However, if you are not sure of which activities require permits near New York State regulated wetlands, please contact your regional DEC office.Wetlands are classified from Class I (which provide the most benefits) to Class IV (which provide fewer benefits). The classification is based on the work that wetlands do, such as storing flood water and providing wildlife habitat. The system for classifying wetlands is contained in regulation (6 NYCRR Part 664) and the classification of individual wetlands is determined as part of the jurisdictional determination process.For additional information on NYS Freshwater Wetlands, see DEC"s website (https://dec.ny.gov/nature/waterbodies/wetlands/freshwater-wetlands-program).For information on wetlands inside the Adirondack Park, please contact the Adirondack Park Agency.For information on wetlands regulated under federal law, please contact the United State Army Corps of Engineers.Contact for this DataDFW, Bureau of Ecosystem Health625 BroadwayAlbany, NY 12233Phone: 518-402-8920fw.ecohealth@dec.ny.gov

This data set represents the extent, approximate location and type of wetlands and deepwater habitats in the United States and its Territories. These data delineate the areal extent of wetlands and surface waters as defined by Cowardin et al. (1979). The National Wetlands Inventory - Version 2, Surface Waters and Wetlands Inventory was derived by retaining the wetland and deepwater polygons that compose the NWI digital wetlands spatial data layer and reintroducing any linear wetland or surface water features that were orphaned from the original NWI hard copy maps by converting them to narrow polygonal features. Additionally, the data are supplemented with hydrography data, buffered to become polygonal features, as a secondary source for any single-line stream features not mapped by the NWI and to complete segmented connections. Wetland mapping conducted in WA, OR, CA, NV and ID after 2012 and most other projects mapped after 2015 were mapped to include all surface water features and are not derived data. The linear hydrography dataset used to derive Version 2 was the U.S. Geological Survey's National Hydrography Dataset (NHD). Specific information on the NHD version used to derive Version 2 and where Version 2 was mapped can be found in the 'comments' field of the Wetlands_Project_Metadata feature class. Certain wetland habitats are excluded from the National mapping program because of the limitations of aerial imagery as the primary data source used to detect wetlands. These habitats include seagrasses or submerged aquatic vegetation that are found in the intertidal and subtidal zones of estuaries and near shore coastal waters. Some deepwater reef communities (coral or tuberficid worm reefs) have also been excluded from the inventory. These habitats, because of their depth, go undetected by aerial imagery. By policy, the Service also excludes certain types of "farmed wetlands" as may be defined by the Food Security Act or that do not coincide with the Cowardin et al. definition. Contact the Service's Regional Wetland Coordinator for additional information on what types of farmed wetlands are included on wetland maps. This dataset should be used in conjunction with the Wetlands_Project_Metadata layer, which contains project specific wetlands mapping procedures and information on dates, scales and emulsion of imagery used to map the wetlands within specific project boundaries.

The MassDEP Wetlands dataset comprises two ArcGIS geodatabase feature classes:The WETLANDSDEP_POLY layer contains polygon features delineating mapped wetland resource areas and attribute codes indicating wetland type.The WETLANDSDEP_ARC layer was generated from the polygon features and contains arc attribute coding based on the adjacent polygons as well as arcs defined as hydrologic connections.Together these statewide layers enhance and replace the original MassDEP wetlands layers, formerly known as DEP Wetlands (1:12,000). It should be noted that these layers provide a medium-scale representation of the wetland areas of the state and are for planning purposes only. Wetlands boundary determination for other purposes, such as the Wetlands Protection Act MA Act M.G.L. c. 131 or local bylaws must use the relevant procedures and criteria.The original MassDEP wetlands mapping project was based on the photo-interpretation of 1:12,000, stereo color-infrared (CIR) photography, captured between 1990 and 2000, and included field verification by the MassDEP Wetlands Conservancy Program (WCP). In 2007 the MassDEP WCP began a statewide effort to assess and where necessary update the original wetlands data. The MassDEP WCP used ESRI ArcGIS Desktop software, assisted by the PurVIEW Stereo Viewing extension, to evaluate and update the original wetlands features based on photo-interpretation of 0.5m, (1:5,000) digital stereo CIR imagery statewide, captured in April 2005. No field verification was conducted on this updated 2005 wetlands data.The 2005 WETLANDSDEP_POLY layer includes polygon features that distinguish it from its predecessor by overall changes in size and shape. In addition, new polygons have been created and original ones deleted. Many of the polygons, however, remain the same as in the original layer. All changes have been made according to the techniques described below. For the purpose of cartographic continuity, a small number of coastal polygons outside the state boundary where added based on data provided by the United States Geological Survey (USGS) and the National Oceanic and Atmospheric Administration (NOAA).The 2005 WETLANDSDEP_ARC layer was generated to support map display and was designed to cartographically enhance the rendering of wetland features on a base map. Arc features in this layer were generated from the wetland polygons and coding (ARC_CODE) was assigned based on the adjacent polygon types. Hydrologic connection features (ARC_CODE = 7) were then added. Where delineated, these arc features indicate an observed hydrologic connection to or between wetland polygons. Although efforts were made to be comprehensive and thorough in mapping hydrologic connections, due to the limitations of aerial photo-interpretation some areas may have been missed.The types of updates made to the original wetland features include alteration, movement/realignment and reclassification. In some cases original wetland areas have been deleted and new areas have been added. Updates to original wetland features resulted from the following factors: changes in the natural environment due to human activity or natural causes; advances in the field of remote sensing, allowing for more refined mapping.Edit changes to the original wetland data include:Addition of new wetland and hydrologic connection featuresAppending (expansion or realignment) of existing (original) wetland and hydrologic connection featuresReclassification of wetlands features, due to change in wetlands environment from the original classificationMovement (or shifting) of original wetland features to better match the source imageryDeletion of original wetland or hydrologic connection features due to changes in wetlands environment or inconsistency with mapping criteria.Please note that although efforts were made to be comprehensive and thorough in the evaluation and mapping of statewide wetland resources some areas of the state may have been missed. Many of the wetland and hydrologic connection features remain the same as in the original data. The polygon attribute SOURCE_SCALE may be used to identify areas that have been altered from the original wetlands. The SOURCE_SCALE code 5000 indicates an updated wetland area. The SOURCE_SCALE code 12000 indicates an unaltered, original wetland polygon.

This database includes all data related to the on-going wetlands inventory project performed by GRSM Inventory and Monitoring (I&M) staff and cooperators from 2004 to Nov 2020. All GRSM I&M wetlands identification and mapping is conducted in the field and conforms to National Park Service D.O. #77.1 guidelines.

In 2016 NYC Parks contracted with the UVM Spatial Analysis Lab to use modern remote sensing and object-based image analysis to create a new wetlands map for New York City. Data inputs include Light Detection and Ranging Data, State and Federal Wetland Inventories, soils, and field data. Because the map was conservative in its wetlands predictions, NYC Parks staff improved the map through a series of desktop and field verification efforts. From June to November 2020, NYC Parks staff field verified the majority of wetlands on NYC Parks' property.

The map will be opportunistically updated depending on available field information and delineations. Another dedicated field verification effort has not been planned. As of June 2021, no subsequent updates to the data are scheduled.

Original field names were updated to field names that are easier to understand.

This dataset was developed to increase awareness regarding the location and extent of wetlands to promote restoration and conservation in New York City. This map does not supersede U.S. Fish and Wildlife Service National Wetlands Inventory (NWI) and New York State Department of Environmental Conservation (NYSDEC) wetlands maps and has no jurisdictional authority. It should be used alongside NWI and NYSDEC datasets as a resource for identifying likely locations of wetlands in New York City. Mapped features vary in the confidence of their verification status, ranging from "Unverified" (meaning the feature exists in its original remotely mapped form and has not been ground truthed) to "Verified - Wetland Delineation" (meaning the boundaries and type of wetland have been verified during an official wetland delineation). Because of the rapid nature of the protocol and the scale of data collection, this product is not a subsitute for on-site investigations and field delineations. The dataset also includes broad classifications for each wetland type, e.g. estuarine, emergent wetland, forested wetland, shrub/scrub wetland, or water. Cowardin classifcations were not used given rapid verfication methods.

The accuracy of the wetlands map has improved over time as a result of the verification process. Fields were added over time as necessitated by the workflow and values were updated with information, either from the field verifications, delineation reports, or desktop analysis.

OBJECTID, Shape, Class_Name_Final, Verification_Status, Create_Date, Last_Edited_Date, Verification_Status_Year, SHAPE_Length, SHAPE_Area

https://www.nycgovparks.org/greening/natural-resources-group

Data Dictionary: https://docs.google.com/spreadsheets/d/1a45qCho45MV-AuOlGxyaRp0cg3cRFKw4lAYBIaU3zi4/edit#gid=260500519

Map: https://data.cityofnewyork.us/dataset/NYC-Wetlands/7piy-bhr9

This data set represents the extent, approximate location and type of wetlands and deepwater habitats in the United States and its Territories. These data delineate the areal extent of wetlands and surface waters as defined by Cowardin et al. (1979). The National Wetlands Inventory - Version 2, Surface Waters and Wetlands Inventory was derived by retaining the wetland and deepwater polygons that compose the NWI digital wetlands spatial data layer and reintroducing any linear wetland or surface water features that were orphaned from the original NWI hard copy maps by converting them to narrow polygonal features. Additionally, the data are supplemented with hydrography data, buffered to become polygonal features, as a secondary source for any single-line stream features not mapped by the NWI and to complete segmented connections. Wetland mapping conducted in WA, OR, CA, NV and ID after 2012 and most other projects mapped after 2015 were mapped to include all surface water features and are not derived data. The linear hydrography dataset used to derive Version 2 was the U.S. Geological Survey's National Hydrography Dataset (NHD). Specific information on the NHD version used to derive Version 2 and where Version 2 was mapped can be found in the 'comments' field of the Wetlands_Project_Metadata feature class. Certain wetland habitats are excluded from the National mapping program because of the limitations of aerial imagery as the primary data source used to detect wetlands. These habitats include seagrasses or submerged aquatic vegetation that are found in the intertidal and subtidal zones of estuaries and near shore coastal waters. Some deepwater reef communities (coral or tuberficid worm reefs) have also been excluded from the inventory. These habitats, because of their depth, go undetected by aerial imagery. By policy, the Service also excludes certain types of "farmed wetlands" as may be defined by the Food Security Act or that do not coincide with the Cowardin et al. definition. Contact the Service's Regional Wetland Coordinator for additional information on what types of farmed wetlands are included on wetland maps. This dataset should be used in conjunction with the Wetlands_Project_Metadata layer, which contains project specific wetlands mapping procedures and information on dates, scales and emulsion of imagery used to map the wetlands within specific project boundaries.

Download In State Plane Projection Here The Lake County Wetland Inventory (LCWI) maps natural and artificial wetlands meeting definitions established by the federal agencies who work with the Lake County Geographic Information System staff to periodically review and update it. These agencies include the United States Environmental Protection Agency, the U.S. Fish and Wildlife Service, the USDA Natural Resources Conservation Service and the United States Army Corps of Engineers. The 1989 federal wetland delineation standards for offsite wetland mapping are used. This data was last published in March of 1993. This update includes changes to the previous version of LCWI including: adjust current wetland boundaries to omit development, including roads; to fine tune boundary placement where that was intended by the original delineation, in some cases, adjust the wetland to photographic features / signature; delete wetlands which the committee decided were mapped in error - for example, trees which were mistaken for wet areas; create polygons for newly delineated artificial wetlands; and newly delineated wetlands or farmed wetlands caused by the continued deterioration of the agricultural drain tile system and increased runoff due to urbanization. The LCWI is a useful tool for general planning and review purposes, but it does not take the place of an on-site delineation by a certified wetland specialist. High resolution (1" = 100') orthorectified aerial imagery captured in April 2002 was used as the base for this update. Other data used as reference for this update include: 2004 SOIL SURVEY GEOGRAPHIC (SSURGO) DATABASE FOR LAKE COUNTY, IL - U.S. Department of Agriculture, Natural Resources Conservation Service; HYDROLOGY2002 - Lake County GIS/Map Division; 2' topography (CONTOURS) - Lake County GIS/Map Division; and various years of historical aerial photography for clarification. By using the more recent higher resolution photography, the resulting updated wetland boundaries are more accurate then the original boundaries published in 1993.

This data layer is an element of the Oregon GIS Framework. The Oregon Wetlands Database (2019) is a geodatabase consisting of three feature classes: 1) Local Wetland Inventory (LWI) Wetlands, 2) National Wetland Inventory (NWI) Wetlands, and 3) More Oregon Wetlands (MOW). Each feature class contains polygons representing wetland boundaries. The three feature classes originated from different sources with distinct purposes, methodologies and time frames for generating geospatial wetlands data, and there is overlap among them; however, all are relevant to the conservation and management of wetlands across the state of Oregon. See the metadata of the individual feature classes for more background information and details per dataset.

Digital wetlands data are intended for use with base maps and digital aerial photography at a scale of 1:12,000 or smaller. Due to the scale, the primary intended use is for regional and watershed data display and analysis, rather than specific project data analysis. The map products were neither designed nor intended to represent legal or regulatory products. Questions or comments regarding the interpretation or classification of wetlands or deepwater habitats can be addressed by visiting https://www.fws.gov/faqs

Due to the quantity and complexity of the wetlands data the wetlands only display at 1:250,000 scale and greater. For wetland information visit https://www.fws.gov/program/national-wetlands-inventory

National Wetland Inventory (NWI) data for Minnesota provide information on the location, extent, and type of Minnesota wetlands. Natural resource managers use NWI data to improve the management, protection, and restoration of wetlands. Wetlands provide many ecological benefits including habitat for fish and wildlife, reducing floods, recharging, improving water quality, and supporting recreation.

These data were updated through a decade-long, multi-agency collaborative effort under leadership of the Minnesota Department of Natural Resources (MNDNR). Major funding was provided by the Environmental and Natural Resources Trust Fund.

This is the first statewide update of the NWI for Minnesota since the original inventory in the mid-1980s. The work was completed in phases by dividing the state into five project areas. Those project areas have all been edgematched into a final seamless statewide dataset.

Ducks Unlimited (Ann Arbor, MI) and St. Mary’s University Geospatial Services (Winona, MN) conducted the wetland mapping and classification under contract to the MNDNR. The Remote Sensing and Geospatial Analysis Laboratory at the University of Minnesota provided support for methods development and field validation. The DNR Resource Assessment Office provided additional support for data processing, field checking, and quality control review.

The updated NWI data delineate and classify wetlands according to the system developed by Cowardin et al. (1979), which is consistent with the original NWI. The updated data also contain a simplified plant community classification (SPCC) and a simplified hydrogeomorphic (HGM) classification. Quality assurance of the data included visual inspection, automated checks for attribute validity and topologic consistency, as well as a formal accuracy assessment based on an independent field verified data set. Further details on the methods employed can be found in the technical procedures document for this project located on the project website (http://www.dnr.state.mn.us/eco/wetlands/nwi_proj.html ).

DOWNLOAD NOTE: NWI data are only provided in either ESRI File Geodatabase or OGC GeoPackage formats. A Shapefile is not available because the size of the NWI dataset exceeds the limit for that format. If you are unable to use the File Geodatabase or GeoPackage, you can view data through Wetland Finder, an interactive mapping application on the DNR’s website (https://arcgis.dnr.state.mn.us/ewr/wetlandfinder ).

SYMBOLOGY NOTE: The ESRI File Geodatabase download includes four layer files that symbolize the data using four different wetland classification systems. The symbology layer files for the Cowardin class and the simplified HGM class are grouped into a smaller number of classes than the full elaborated classifications. Detail is available in the Minnesota Wetland Inventory User Guide and Summary Statistics report (https://files.dnr.state.mn.us/eco/wetlands/nwi-user-guide.pdf ). The layer files for these data have been set up to restrict drawing of the data when zoomed out beyond 1:250,000 scale. This is, in part, to prevent problems with slow performance with this large dataset.

This data set represents the extent, approximate location and type of wetlands and deepwater habitats in the United States and its Territories. These data delineate the areal extent of wetlands and surface waters as defined by Cowardin et al. (1979). The National Wetlands Inventory - Version 2, Surface Waters and Wetlands Inventory was derived by retaining the wetland and deepwater polygons that compose the NWI digital wetlands spatial data layer and reintroducing any linear wetland or surface water features that were orphaned from the original NWI hard copy maps by converting them to narrow polygonal features. Additionally, the data are supplemented with hydrography data, buffered to become polygonal features, as a secondary source for any single-line stream features not mapped by the NWI and to complete segmented connections. Wetland mapping conducted in WA, OR, CA, NV and ID after 2012 and most other projects mapped after 2015 were mapped to include all surface water features and are not derived data. The linear hydrography dataset used to derive Version 2 was the U.S. Geological Survey's National Hydrography Dataset (NHD). Specific information on the NHD version used to derive Version 2 and where Version 2 was mapped can be found in the 'comments' field of the Wetlands_Project_Metadata feature class. Certain wetland habitats are excluded from the National mapping program because of the limitations of aerial imagery as the primary data source used to detect wetlands. These habitats include seagrasses or submerged aquatic vegetation that are found in the intertidal and subtidal zones of estuaries and near shore coastal waters. Some deepwater reef communities (coral or tuberficid worm reefs) have also been excluded from the inventory. These habitats, because of their depth, go undetected by aerial imagery. By policy, the Service also excludes certain types of "farmed wetlands" as may be defined by the Food Security Act or that do not coincide with the Cowardin et al. definition. Contact the Service's Regional Wetland Coordinator for additional information on what types of farmed wetlands are included on wetland maps. This dataset should be used in conjunction with the Wetlands_Project_Metadata layer, which contains project specific wetlands mapping procedures and information on dates, scales and emulsion of imagery used to map the wetlands within specific project boundaries.Download Link: https://www.fws.gov/wetlands/data/Data-Download.html

The MassDEP Wetlands service comprises two feature types, polygons (areas) and arcs (lines). The attribute codes in the polygon layer describe different types of wetland environments and the arc attributes describe line types based on adjacent polygon types or arcs defined as hydrologic connections.

This map service displays the data based on the generalized categories in the POLY_CODE and ARC_CODE fields. The 2005 MassDEP Wetlands layers provide a medium-scale representation of wetland areas of the state. Wetland areas consist of open water, vegetated wetlands, and coastal landforms. The hydrologic connection arcs provide a medium scale representation of linear features (less than 50 feet wide) that appear to contain flowing water (either intermittently or perennially) and flow into, out of, or between mapped wetland polygons. Hydrologic connections may consist of rivers, streams, ditches, culverts, swales, or other water conveyance features.

Please see MassGIS' metadata for more details.A feature service is also available.

This is a MD iMAP hosted service layer. Find more information at http://imap.maryland.gov. The Maryland Department of Natural resources began updating the National Wetlands Inventory (NWI) mapping of wetlands in Maryland in the early 1990s. This database lists the 3.75' x 3.75' USGS quadrangles for which 'DNR Wetlands' have been mapped. It identifies the date of source photography used to map wetlands - and the status of mapping effort. This database also gives the five-letter abbreviation used for naming 'DNR_Wetlands' files. In most cases - the first five characters are the first 'five characters' of the 'USGS 7.5' Quad Name.' When completed - the series will provide coverage for the entire State of Maryland. Last Updated: Feature Service Layer Link: https://mdgeodata.md.gov/imap/rest/services/Hydrology/MD_Wetlands/MapServer ADDITIONAL LICENSE TERMS: The Spatial Data and the information therein (collectively "the Data") is provided "as is" without warranty of any kind either expressed implied or statutory. The user assumes the entire risk as to quality and performance of the Data. No guarantee of accuracy is granted nor is any responsibility for reliance thereon assumed. In no event shall the State of Maryland be liable for direct indirect incidental consequential or special damages of any kind. The State of Maryland does not accept liability for any damages or misrepresentation caused by inaccuracies in the Data or as a result to changes to the Data nor is there responsibility assumed to maintain the Data in any manner or form. The Data can be freely distributed as long as the metadata entry is not modified or deleted. Any data derived from the Data must acknowledge the State of Maryland in the metadata.

The National Wetlands Inventory (NWI) dataset was downloaded from the US Fish and Wildlife Service website at https://www.fws.gov/wetlands/Data/State-Downloads.html on 05/04/2021. Metadata derives from original NWI database and updated to reflect the date of download. According to website, this layer was updated last October 1st, 2020. This is a clip of all wetlands features within the Westchester County boundary minus all riverines, Long Island Sound, and the Hudson River.This data set represents the extent, approximate location and type of wetlands and deepwater habitats in the United States and its Territories. These data delineate the areal extent of wetlands and surface waters as defined by Cowardin et al. (1979). The National Wetlands Inventory - Version 2, Surface Waters and Wetlands Inventory was derived by retaining the wetland and deepwater polygons that compose the NWI digital wetlands spatial data layer and reintroducing any linear wetland or surface water features that were orphaned from the original NWI hard copy maps by converting them to narrow polygonal features. Additionally, the data are supplemented with hydrography data, buffered to become polygonal features, as a secondary source for any single-line stream features not mapped by the NWI and to complete segmented connections. Wetland mapping conducted in WA, OR, CA, NV and ID after 2012 and most other projects mapped after 2015 were mapped to include all surface water features and are not derived data. The linear hydrography dataset used to derive Version 2 was the U.S. Geological Survey's National Hydrography Dataset (NHD). Specific information on the NHD version used to derive Version 2 and where Version 2 was mapped can be found in the 'comments' field of the Wetlands_Project_Metadata feature class. Certain wetland habitats are excluded from the National mapping program because of the limitations of aerial imagery as the primary data source used to detect wetlands. These habitats include seagrasses or submerged aquatic vegetation that are found in the intertidal and subtidal zones of estuaries and near shore coastal waters. Some deepwater reef communities (coral or tuberficid worm reefs) have also been excluded from the inventory. These habitats, because of their depth, go undetected by aerial imagery. By policy, the Service also excludes certain types of "farmed wetlands" as may be defined by the Food Security Act or that do not coincide with the Cowardin et al. definition. Contact the Service's Regional Wetland Coordinator for additional information on what types of farmed wetlands are included on wetland maps. This dataset should be used in conjunction with the Wetlands_Project_Metadata layer, which contains project specific wetlands mapping procedures and information on dates, scales and emulsion of imagery used to map the wetlands within specific project boundaries.

This hosted feature layer has been published in RI State Plane Feet NAD 83.This data set represents the extent, approximate location and type of wetlands and deepwater habitats in Rhode Island. These data delineate the areal extent of wetlands and surface waters as defined by Cowardin et al. (1979). Certain wetland habitats are excluded from the National mapping program because of the limitations of aerial imagery as the primary data source used to detect wetlands. These habitats include seagrasses or submerged aquatic vegetation that are found in the intertidal and subtidal zones of estuaries and near shore coastal waters. Some deepwater reef communities (coral or tuberficid worm reefs) have also been excluded from the inventory. These habitats, because of their depth, go undetected by aerial imagery. By policy, the Service also excludes certain types of "farmed wetlands" as may be defined by the Food Security Act or that do not coincide with the Cowardin et al. definition. Contact the Service's Regional Wetland Coordinator for additional information on what types of farmed wetlands are included on wetland maps.

The Montana Wetland and Riparian Framework represents the extent, type, and approximate location of wetlands, riparian areas, and deepwater habitats in Montana. These data delineate the areal extent of wetlands and deepwater habitats as defined by Cowardin et al. (2013) and riparian areas as defined by the U.S. Fish and Wildlife Service (2019). This is modern mapping completed by the University of Montana's Ecological Mapping, Monitoring and Analysis (EMMA) Group. Wetland and riparian areas were manually digitized at a scale of 1:4,500 or 1:5,000 from orthorectified digital color-infrared aerial imagery collected during the summers of 2005, 2009, 2011, 2013, 2015, 2017, 2019, and 2021 by the National Agricultural Imagery Program (NAIP). These data are intended for use in publications at a scale of 1:12,000 or smaller. These data do not cover the entire state of Montana. For areas within Montana that do not have updated mapping completed or modern mapping completed, please download the NWI Legacy (outdated mapping) data from https://www.fws.gov/program/national-wetlands-inventory/data-download. For more information regarding the different datasets, please refer to the following document https://mtnhp.org/nwi/Wetland_Riparian_Mapping_Status_Info.pdf. The Wetland and Riparian Map Service also includes historic National Wetlands Inventory mapping completed by the U.S. Fish and Wildlife Service in the 1980s. Not all historic NWI mapping are available digitally. The mapping status of each topographic quad is also provided in the quad status layer. The map service has scale levels set: attribute labels display at a scale of 1:100,000 or larger and mapped polygons display at a scale of 1:1,000,000 or larger.

• See Oregon Department of State Lands : Inventories and Maps : Projects In Wetlands and Waters : State of Oregon for more information regarding protecting wetlands.This data set represents the extent, approximate location and type of wetlands and deepwater habitats in the United States and its Territories. These data delineate the areal extent of wetlands and surface waters as defined by Cowardin et al. (1979). The National Wetlands Inventory - Version 2, Surface Waters and Wetlands Inventory was derived by retaining the wetland and deepwater polygons that compose the NWI digital wetlands spatial data layer and reintroducing any linear wetland or surface water features that were orphaned from the original NWI hard copy maps by converting them to narrow polygonal features. Additionally, the data are supplemented with hydrography data, buffered to become polygonal features, as a secondary source for any single-line stream features not mapped by the NWI and to complete segmented connections. Wetland mapping conducted in WA, OR, CA, NV and ID after 2012 and most other projects mapped after 2015 were mapped to include all surface water features and are not derived data. The linear hydrography dataset used to derive Version 2 was the U.S. Geological Survey's National Hydrography Dataset (NHD). Specific information on the NHD version used to derive Version 2 and where Version 2 was mapped can be found in the 'comments' field of the Wetlands_Project_Metadata feature class. Certain wetland habitats are excluded from the National mapping program because of the limitations of aerial imagery as the primary data source used to detect wetlands. These habitats include seagrasses or submerged aquatic vegetation that are found in the intertidal and subtidal zones of estuaries and near shore coastal waters. Some deepwater reef communities (coral or tuberficid worm reefs) have also been excluded from the inventory. These habitats, because of their depth, go undetected by aerial imagery. By policy, the Service also excludes certain types of "farmed wetlands" as may be defined by the Food Security Act or that do not coincide with the Cowardin et al. definition. Contact the Service's Regional Wetland Coordinator for additional information on what types of farmed wetlands are included on wetland maps. This dataset should be used in conjunction with the Wetlands_Project_Metadata layer, which contains project specific wetlands mapping procedures and information on dates, scales and emulsion of imagery used to map the wetlands within specific project boundaries.