The political boundary datalayer is a polygon representation of town boundaries created from arcs developed from survey coordinates extracted from the 68-volume Harbor and Lands Commission Town Boundary Atlas for the 351 communities (cities and towns) in Massachusetts. The Atlas was published in the early 1900's and is maintained by the Survey Section of Massachusetts Highway Department. For communities with a coastal boundary, MassGIS has collaborated with Massachusetts Water Resources Authority and the Department of Environmental Protection to complete a 1:12000 scale coastline. The boundary for the coastline was defined as being the upland side of tidal flats and rocky inter-tidal zones. Note that the 351 communities are the official municipal names, not including "villages" or other sections of towns.This datalayer was created for the purposes of providing an up-to-date polygon version of the town boundaries for the 351 cities and towns of the Commonwealth of Massachusetts. The legislative intent for some boundaries could not be mapped. Boundaries where that is true are identified in the attribute information. This layer contains multi-part polygons, one for each municipality. The coastline on this layer has been generalized for small-scale cartography and faster display in web map services.See the layer metadata for details.

This political boundary layer is the most accurate representing the city and town boundaries in the Commonwealth of Massachusetts.

This datalayer has been created from latitude and longitude coordinates found in the 68-volume Harbor and Lands Commission Town Boundary Atlas. This Atlas series, and updates since it was published, describes the legal boundary for each of the 351 municipalities in Massachusetts. These coordinates were recorded from surveys of the location of each boundary marker around the periphery of each community. Each survey was tied into higher order monumented survey control points. The Atlases also include detailed descriptions of each community's boundary and location maps for each of the original boundary marker locations. The original surveys were conducted in the 1890s. The Atlas series was published in the early 1900s and has since been updated by the Survey Section of the Massachusetts Highway Department with changes as they are approved by the legislature. MassGIS staff collaborated closely with staff from the Survey Section during the development of this data layer. MassGIS staff keyed the coordinates into a database; that data entry was double-checked by staff from the Survey Section. Staff from the Survey Section then converted the latitude/longitude coordinates to the NAD83 datum and also created a version of the coordinates in state plane coordinates with units of meters. MassGIS used the state plane coordinates to "generate" points in ArcGIS. Boundary arcs from the existing USGS-derived municipal boundary data layer were then snapped to the survey-derived points. The differences between the municipal boundary arcs digitized from those on the USGS quads and those created by snapping to the survey-derived coordinates are typically plus or minus 12 feet, although these differences are sometimes less and sometimes more. Some municipal boundary arcs (about 15% of the total) follow the edge of a road or rail right-of-way or a stream or river channel. In these cases, the new boundary arcs were "heads up" digitized based on features visible on the statewide 1:5,000 color orthos from imagery flown in 2001.

For communities with a coastal boundary, MassGIS collaborated with the Massachusetts Water Resources Authority and the Department of Environmental Protection to complete a 1:12,000 scale coastline.

City/Town names' labels are included in this service.

(This service was published from a map document using the Web Mercator projection for the data frame.)

For full metadata please see http://www.mass.gov/itd/townsurvey.

This layer is the most accurate representation of Massachusetts' municipal (city and town) boundaries; this representation is based on the legislatively approved record of municipal boundaries.

This political boundary datalayer has been created from latitude and longitude coordinates found in the 68-volume Harbor and Lands Commission Town Boundary Atlas. This Atlas series, and updates since it was published, describes the legal boundary for each of the 351 municipalities in Massachusetts. These coordinates were recorded from surveys of the location of each boundary marker around the periphery of each community. Each survey was tied into higher order monumented survey control points. The Atlases also include detailed descriptions of each community's boundary and location maps for each of the original boundary marker locations. The original surveys were conducted in the 1890s. The Atlas series was published in the early 1900s and has since been updated by the Survey Section of the Massachusetts Highway Department (now The Massachusetts Department of Transportation (MassDOT) - Highway Division) with changes as they are approved by the legislature.

This hosted feature layer, with "Enable Sync" set, contains multi-part polygons representing inland and offshore areas, with one feature for each of the state's 351 municipalities.

View full metadata

Massachusetts city and town boundaries, drawn with yellow lines, and labeled with yellow municipal names, ideal for display atop aerial photography.Please see https://www.mass.gov/info-details/massgis-data-municipalities for full metadata.

To access parcel information:Enter an address or zoom in by using the +/- tools or your mouse scroll wheel. Parcels will draw when zoomed in.Click on a parcel to display a popup with information about that parcel.Click the "Basemap" button to display background aerial imagery.From the "Layers" button you can turn map features on and off.Complete Help (PDF)Parcel Legend:Full Map LegendAbout this ViewerThis viewer displays land property boundaries from assessor parcel maps across Massachusetts. Each parcel is linked to selected descriptive information from assessor databases. Data for all 351 cities and towns are the standardized "Level 3" tax parcels served by MassGIS. More details ...Read about and download parcel dataUpdatesV 1.1: Added 'Layers' tab. (2018)V 1.2: Reformatted popup to use HTML table for columns and made address larger. (Jan 2019)V 1.3: Added 'Download Parcel Data by City/Town' option to list of layers. This box is checked off by default but when activated a user can identify anywhere and download data for that entire city/town, except Boston. (March 14, 2019)V 1.4: Data for Boston is included in the "Level 3" standardized parcels layer. (August 10, 2020)V 1.4 MassGIS, EOTSS 2021

This map service from MassGIS displays the 26 Massachusetts Gateway Cities, municipalities with:population greater than 35,000 and less than 250,000;median household income below the state average;and rate of educational attainment of a bachelor’s degree or above that is below the state average.Read more about Gateway CitiesMap service also available.

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation.. In New England (Connecticut, Maine, Massachusetts, New Hampshire, Rhode Island, and Vermont), the Office of Management and Budget (OMB) has defined an alternative county subdivision (generally cities and towns) based definition of Core Based Statistical Areas (CBSAs) known as New England City and Town Areas (NECTAs). NECTAs are defined using the same criteria as Metropolitan Statistical Areas and Micropolitan Statistical Areas and are identified as either metropolitan or micropolitan, based, respectively, on the presence of either an urban area of 50,000 or more population or an urban cluster of at least 10,000 and less than 50,000 population. A NECTA containing a single core urban area with a population of at least 2.5 million may be subdivided to form smaller groupings of cities and towns referred to as NECTA Divisions.. Boundaries are those defined by OMB based on the 2010 Census, published in 2013, and updated in 2015.

Geospatial data about Worcester County, Massachusetts City Boundaries. Export to CAD, GIS, PDF, CSV and access via API.

This datalayer is part of a group of layers used for research in the Ipswich River Watershed. This layer includes the area within each town in the Ipswich River Watershed in vector form. This map contains complete information and was derived from the ip30_noinfo_towns layer. To show area within the towns the make up the Ipswich River Watershed study area.

MassGIS' standardized ("Level 3") property tax parcel mapping data set was developed through a competitive procurement funded by MassGIS. Each community in the Commonwealth was bid on by one or more vendors and the unit of work awarded was a city or town. The specification for this work was Level 3 of the MassGIS Digital Parcel Standard. Standardization of assessor parcel mapping is complete for all 351 Massachusetts' cities and towns. MassGIS is now incorporating updates from municipalities into the database. This hosted feature layer is exported from MassGIS' internal database of the feature class GISDATA.L3_TAXPAR_POLY_ASSESS, which links L3_TAXPAR_POLY and L3_ASSESS. The export includes the expression: (POLY_TYPE IN ('FEE', 'TAX')) OR (POLY_TYPE IN ('ROW', 'PRIV_ROW', 'RAIL_ROW', 'WATER') AND PROP_ID IS NOT NULL) It contains several fields from GISDATA.L3_ASSESS and stacked polygons where multiple assessor records link to a parcel. It contains features that do not have an associated record in GISDATA.L3_ASSESS, except for rights of way and water bodies. ROWs and water bodies with a non-null PROP_ID are included. The data in this feature layer is used for the popups in the Massachusetts Interactive Property Map. See full data descriptionA hosted tile layer will draw very quickly at map scale of 1:18,056 (level 15) to 1:564 (level 20).

ESRI polygon feature class representing the City of Somerville, Massachusetts city boundary.

This layer is a component of BostonMA.

Geospatial data about Revere, Massachusetts Area Towns. Export to CAD, GIS, PDF, CSV and access via API.

Geospatial data about City of Springfield, Massachusetts Streets. Export to CAD, GIS, PDF, CSV and access via API.

The Town Halls layer stores the location of primary municipal executive offices in Massachusetts, including town and city halls. The Massachusetts Emergency Management Agency (MEMA) GIS Program in cooperation with the Regional Planning Agencies and participating communities developed the original version of this data layer. MassGIS revised the data using its master address database in spring 2017. Points were adjusted to fall atop building point locations.More details...Feature service also available.

City of Newton, MA GIS Data Dictionary

This layer is the most accurate representation of Massachusetts' municipal (city and town) boundaries; this representation is based on the legislatively approved record of municipal boundaries. Authoritative determination of municipal boundary locations can only be provided by a licensed land surveyor.

This political boundary datalayer has been created from latitude and longitude coordinates found in the 68-volume Harbor and Lands Commission Town Boundary Atlas. This Atlas series, and updates since it was published, describes the legal boundary for each of the 351 municipalities in Massachusetts. These coordinates were recorded from surveys of the location of each boundary marker around the periphery of each community. Each survey was tied into higher order monumented survey control points. The Atlases also include detailed descriptions of each community's boundary and location maps for each of the original boundary marker locations. The original surveys were conducted in the 1890s. The Atlas series was published in the early 1900s and has since been updated by the Survey Section of the Massachusetts Highway Department (now The Massachusetts Department of Transportation (MassDOT) - Highway Division) with changes as they are approved by the legislature.See complete metadata.

Geospatial data about City of Springfield, Massachusetts Building Footprints. Export to CAD, GIS, PDF, CSV and access via API.

ESRI polygon feature class representing City of Somerville, Massachusetts neighborhood boundaries.

This dataset is a subset of the MassGIS Libraries layer. It has been projected into the NAD 1983 StatePlane MA FIPS 2001 (US Feet) coordinate system. This dataset contains points which represent locations of all public and some special libraries currently registered with the Massachusetts Board of Library Commissioners (MBLC). More information: Visit the MassGIS Data: Libraries webpage to learn more.Informing Worcester is the City of Worcester's open data portal where interested parties can obtain public information at no cost.