Montgomery and Prince George's counties project called for the Planning, Acquisition, processing and derivative products of lidar data to be collected at a nominal pulse spacing (NPS) of 0.7 meter. Project specifications are based on the U.S. Geological Survey National Geospatial Program Base Lidar Specification, Version 1.2. The data was developed based on a horizontal projection/datum of NAD83 (HARN), State Plane, Feet and vertical datum of NAVD88 (GEOID12B), Feet. Lidar data was delivered as processed Classified LAS 1.4 files, formatted to 1,413 individual 4000 ft x 6000 ft tiles, as tiled Intensity Rasters, and as tiled bare-earth DEM; all tiled to the same 4000 ft x 6000 ft schema. Ground Conditions: Lidar was collected in early to mid 2018, while no snow was on the ground and rivers were at or below normal levels. Sensor errors in mulitple locations were identified in processing, additonal acquisition on 7/20/2018 was completed to remedy the errors. 2016 lidar data was used with approval in a single area of restricted airspace. In order to post process the lidar data to meet task order specifications and meet ASPRS vertical accuracy guidelines, Sanborn Map Company, Inc. established a total of 23 ground control points that were used to calibrate the lidar to known ground locations established throughout the project area. An additional 79 independent accuracy check points in Open Terrain and Urban landcovers were used to assess the vertical accuracy of the data. These check points were not used to calibrate or post process the data.This is a MD iMAP hosted service. Find more information at https://imap.maryland.gov.Image Service Link: https://mdgeodata.md.gov/lidar/rest/services/Montgomery/MD_montgomery_slope_m/ImageServer

Geographic Extent: Montgomery and Prince George's counties Maryland, covering approximately 1,110 square miles. Dataset Description: Montgomery and Prince George's counties project called for the Planning, Acquisition, processing and derivative products of lidar data to be collected at a nominal pulse spacing (NPS) of 0.7 meter. Project specifications are based on the U.S. Geological Survey Na...

This metadata record describes the classified bare earth lidar digital elevation model (DEM) data products derived from the Montgomery County, MD LiDAR project covering the defined project area of Montgomery County and immediate surroundings.This is a MD iMAP hosted service. Find more information athttps://imap.maryland.gov.Image Service Link:https://lidar.geodata.md.gov/imap/rest/services/Montgomery/MD_montgomery_2013_aspect_m/ImageServer

This metadata record describes the classified bare earth lidar digital elevation model (DEM) data products derived from the Montgomery County, MD LiDAR project covering the defined project area of Montgomery County and immediate surroundings.This is a MD iMAP hosted service. Find more information at https://imap.maryland.gov.Image Service Link: https://lidar.geodata.md.gov/imap/rest/services/Montgomery/MD_montgomery_2013_shadedRelief_RGB/ImageServer

This dataset contains digitized land use/land cover (LULC) for the years 2011, 2015, and 2017. The dataset contains 1-meter resolution raster maps for each year covering the geographic area for six watersheds within and near the Clarksburg Special Protection Area located in Montgomery County, Maryland, USA. The area includes LULC within 500-foot buffered watersheds. Watershed boundaries for Cabin Branch (CB), Crystal Rock (CR), Soper Branch (SB), Tributary 104 (T104), and Tributary 109 (T109) were derived using USGS topographic maps (1:24,000-scale) while Ten Mile Creek (TMC) was derived using Montgomery County, Maryland LiDAR data (1-meter resolution). LULC classes include a water class (10), impervious surface class (20), barren class (30), forest class (40), grass class (70), and agriculture class (80).

This dataset contains digitized land use/land cover (LULC) polygons for years between 1998 and 2013 for six watersheds within and near the Clarksburg Special Protection Area located in Montgomery County, Maryland, USA. Each polygon is representative of the LULC for a specific year within 500-foot buffered watersheds. Watershed boundaries for Cabin Branch (CB), Crystal Rock (CR), Soper Branch (SB), Tributary 104 (T104), and Tributary 109 (T109) were derived using USGS topographic maps while Ten Mile Creek (TMC) was derived using Montgomery County, Maryland LiDAR data. The Habitat Digitizer Extension add-in from NOAA for ArcMap was used to customize a hierarchical classification scheme to attribute polygons delineated by visually interpreting aerial imagery and orthoimagery taken during tree leaf-off season.

Geographic Extent: SANDY_Restoration_VA_MD_DC_QL2 Area of Interest covers approximately 2,002 square miles. Lot #5 contains the full project area Dataset Description: The SANDY_Restoration_VA_MD_DC_QL2 project called for the Planning, Acquisition, processing and derivative products of LiDAR data to be collected at a nominal pulse spacing (NPS) of 0.7 meters. Project specifications are based on the U.S. Geological Survey National Geospatial Program Base LiDAR Specification, Version 1. The data was developed based on a horizontal projection/datum of UTM Zone 18 North, NAD83, meters and vertical datum of NAVD1988 (GEOID12A), meters. LiDAR data was delivered in RAW flight line swath format, processed to create Classified LAS 1.2 Files formatted to 2283 individual 1500m x 1500m tiles, and corresponding Intensity Images and Bare Earth DEMs tiled to the same 1500m x 1500m schema, and Breaklines in ESRI Shapefile format. The data was then converted to a horizontal projection/datum of NAD83 Maryland State Plane Coordinate System, Feet. LiDAR was delivered in Classified LAS 1.2 Files formatted to 1927 individual 4000' x 6000' tiles, and corresponding Intensity Images and Bare Earth DEMs tiled to the same 4000' x 6000' schema, and Breaklines in ESRI Shapefile format. Ground Conditions: LiDAR was collected in Winter 2014, while no snow was on the ground and rivers were at or below normal levels. In order to post process the LiDAR data to meet task order specifications, Quantum Spatial established a total of 59 QA control points and 95 Land Cover control points that were used to calibrate the LiDAR to known ground locations established throughout the SANDY_Restoration_VA_MD_DC_QL2 project area.This is a MD iMAP hosted service. Find more information at https://imap.maryland.gov.Image Service Link: https://lidar.geodata.md.gov/imap/rest/services/PrinceGeorges/MD_princegeorges_2015_aspect_m/ImageServer

This metadata record describes the classified bare earth lidar digital elevation model (DEM) data products derived from the Montgomery County, MD LiDAR project covering the defined project area of Montgomery County and immediate surroundings.This is a MD iMAP hosted service. Find more information at https://imap.maryland.gov.Image Service Link: https://lidar.geodata.md.gov/imap/rest/services/Montgomery/MD_montgomery_2013_slope_m/ImageServer

Montgomery and Prince George's counties project called for the Planning, Acquisition, processing and derivative products of lidar data to be collected at a nominal pulse spacing (NPS) of 0.7 meter. Project specifications are based on the U.S. Geological Survey National Geospatial Program Base Lidar Specification, Version 1.2. The data was developed based on a horizontal projection/datum of NAD83 (HARN), State Plane, Feet and vertical datum of NAVD88 (GEOID12B), Feet. Lidar data was delivered as processed Classified LAS 1.4 files, formatted to 1,413 individual 4000 ft x 6000 ft tiles, as tiled Intensity Rasters, and as tiled bare-earth DEM; all tiled to the same 4000 ft x 6000 ft schema. Ground Conditions: Lidar was collected in early to mid 2018, while no snow was on the ground and rivers were at or below normal levels. Sensor errors in mulitple locations were identified in processing, additonal acquisition on 7/20/2018 was completed to remedy the errors. 2016 lidar data was used with approval in a single area of restricted airspace. In order to post process the lidar data to meet task order specifications and meet ASPRS vertical accuracy guidelines, Sanborn Map Company, Inc. established a total of 23 ground control points that were used to calibrate the lidar to known ground locations established throughout the project area. An additional 79 independent accuracy check points in Open Terrain and Urban landcovers were used to assess the vertical accuracy of the data. These check points were not used to calibrate or post process the data.This is a MD iMAP hosted service. Find more information at https://imap.maryland.gov.Image Service Link: https://mdgeodata.md.gov/lidar/rest/services/PrinceGeorges/MD_princegeorges_aspect_m/ImageServer