Delhi was the largest city in terms of number of inhabitants in India in 2023.The capital city was estimated to house nearly 33 million people, with Mumbai ranking second that year. India's population estimate was 1.4 billion, ahead of China that same year.
As per a decadal analysis of forest cover change in megacities of India between 2011 and 2021, Hyderabad emerged as the city with a *** percent growth in forest area, followed by Chennai and Delhi. Ahmedabad lost ** percent of its forest cover in a period of ten years.
Attribution 3.0 (CC BY 3.0)https://creativecommons.org/licenses/by/3.0/
License information was derived automatically
It is estimated that more than 8 billion people live on Earth and the population is likely to hit more than 9 billion by 2050. Approximately 55 percent of Earth’s human population currently live in areas classified as urban. That number is expected to grow by 2050 to 68 percent, according to the United Nations (UN).The largest cities in the world include Tōkyō, Japan; New Delhi, India; Shanghai, China; México City, Mexico; and São Paulo, Brazil. Each of these cities classifies as a megacity, a city with more than 10 million people. The UN estimates the world will have 43 megacities by 2030.Most cities' populations are growing as people move in for greater economic, educational, and healthcare opportunities. But not all cities are expanding. Those cities whose populations are declining may be experiencing declining fertility rates (the number of births is lower than the number of deaths), shrinking economies, emigration, or have experienced a natural disaster that resulted in fatalities or forced people to leave the region.This Global Cities map layer contains data published in 2018 by the Population Division of the United Nations Department of Economic and Social Affairs (UN DESA). It shows urban agglomerations. The UN DESA defines an urban agglomeration as a continuous area where population is classified at urban levels (by the country in which the city resides) regardless of what local government systems manage the area. Since not all places record data the same way, some populations may be calculated using the city population as defined by its boundary and the metropolitan area. If a reliable estimate for the urban agglomeration was unable to be determined, the population of the city or metropolitan area is used.Data Citation: United Nations Department of Economic and Social Affairs. World Urbanization Prospects: The 2018 Revision. Statistical Papers - United Nations (ser. A), Population and Vital Statistics Report, 2019, https://doi.org/10.18356/b9e995fe-en.
https://creativecommons.org/publicdomain/zero/1.0/https://creativecommons.org/publicdomain/zero/1.0/
It contains latitudes and longitudes ,population of major cities of India.
https://simplemaps.com/data/in-cities
I wanted to create interactive maps for one of my project so i created this dataset.
As of 2024, Mumbai had a gross domestic product of *** billion U.S. dollars, the highest among other major cities in India. It was followed by Delhi with a GDP of around *** billion U.S. dollars. India’s megacities also boast the highest GDP among other cities in the country. What drives the GDP of India’s megacities? Mumbai is the financial capital of the country, and its GDP growth is primarily fueled by the financial services sector, port-based trade, and the Hindi film industry or Bollywood. Delhi in addition to being the political hub hosts a significant services sector. The satellite cities of Noida and Gurugram amplify the city's economic status. The southern cities of Bengaluru and Chennai have emerged as IT and manufacturing hubs respectively. Hyderabad is a significant player in the pharma and IT industries. Lastly, the western city of Ahmedabad, in addition to its strategic location and ports, is powered by the textile, chemicals, and machinery sectors. Does GDP equal to quality of life? Cities propelling economic growth and generating a major share of GDP is a global phenomenon, as in the case of Tokyo, Shanghai, New York, and others. However, the GDP, which measures the market value of all final goods and services produced in a region, does not always translate to a rise in quality of life. Five of India’s megacities featured in the Global Livability Index, with low ranks among global peers. The Index was based on indicators such as healthcare, political stability, environment and culture, infrastructure, and others.
Goal 11: Make cities and human settlements inclusive, safe, resilient, and sustainableHalf of humanity – 3.5 billion people – lives in cities today. By 2030, almost 60% of the world’s population will live in urban areas.828 million people live in slums today and the number keeps rising.The world’s cities occupy just 2% of the Earth’s land, but account for 60 – 80% of energy consumption and 75% of carbon emissions. Rapid urbanization is exerting pressure on fresh water supplies, sewage, the living environment, and public health. But the high density of cities can bring efficiency gains and technological innovation while reducing resource and energy consumption.Cities have the potential to either dissipate the distribution of energy or optimise their efficiency by reducing energy consumption and adopting green – energy systems. For instance, Rizhao, China has turned itself into a solar – powered city; in its central districts, 99% of households already use solar water heaters.68% of India’s total population lives in rural areas (2013-14).By 2030, India is expected to be home to 6 mega-cities with populations above 10 million. Currently 17% of India’s urban population lives in slums.This map layer is offered by Esri India, for ArcGIS Online subscribers, If you have any questions or comments, please let us know via content@esri.in.
https://fred.stlouisfed.org/legal/#copyright-citation-requiredhttps://fred.stlouisfed.org/legal/#copyright-citation-required
Graph and download economic data for Geographical Outreach: Number of Automated Teller Machines (ATMs) in 3 Largest Cities for India (INDFCACLNUM) from 2007 to 2015 about ATM, India, banks, and depository institutions.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
Population in the largest city (% of urban population) in India was reported at 6.3201 % in 2024, according to the World Bank collection of development indicators, compiled from officially recognized sources. India - Population in the largest city - actual values, historical data, forecasts and projections were sourced from the World Bank on July of 2025.
In 2021, Delhi had the highest metro coverage among major metropolitan cities in India with ** operational kilometers per *********** people. At the same time, Mumbai had the lowest coverage with only *** operational kilometers per *********** people. Poor public transportation in many Indian cities was responsible for traffic congestion and air pollution.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
This dataset and codebook correspond to the second round of survey data gathered in Delhi and Mumbai (India) in 2024, within the project FULFILL - Fundamental Decarbonisation Through Sufficiency By Lifestyle Changes.
As part of Work Package 3 (WP3) in the FULFILL project, we collected quantitative data from six countries: Denmark, France, Germany, Italy, Latvia, and India. The first round of the survey, consisted of recruiting a representative sample of approximately 2000 households in each country. In this second survey round, we recruit around 1000 respondents from the initial survey round, ensuring representativity is maintained.
In order to consider sufficiency-oriented lifestyles not only in Europe but also in the Global South, we conducted a similar survey in India. More specifically, we adjusted the survey to fit the context (e.g., including cooling) and, due to the large size and diversity within India, we focused data collection on two Mega Cities (>10Mio inhabitants), namely Mumbai and Delhi. Due to the different cultural context and in exchange with Indian researchers and the supporting market research institute, we decided to change the methodology for data collection from an online survey to face-to-face interviews. The survey includes a quantitative assessment of the carbon footprint in various domains of life, such as housing, mobility, and diet. In addition to this, the survey also measures socio-economic factors such as age, gender, income, education, household size, life stage, and political orientation. Furthermore, the survey includes measures of quality of life, encompassing aspects such as health and well-being, environmental quality, financial security, and comfort.
The dataset contains daily temperature for four major cities in India namely : Kolkata , Mumbai , Chennai , Delhi .
The dataset has been curated from : academic.udayton.edu The blanks or not available data has been marked : na
https://dataful.in/terms-and-conditionshttps://dataful.in/terms-and-conditions
The datasets contains date- and state-wise historically compiled data on air quality (by pollution level) in rural and urban areas of India from the year 2015 , as measured by Central Pollution Board (CPCB) through its daily (24 hourly measurements, taken at 4 PM everyday) Air Quality Index (AQI) reports.
The CPCB measures air quality by continuous online monitoring of various pollutants such as Particulate Matter10 (PM10), Particulate Matter2.5 (PM2.5), Sulphur Dioxide (SO2), Nitrogen Oxide or Oxides of Nitrogen (NO2), Ozone (O3), Carbon Monoxide (CO), Ammonic (NH3) and Lead (Pb) and calculating their level of pollution in the ambient air. Based on the each pollutant load in the air and their associated health impacts, the CPCB calculates the overall Air Pollution in Air Quality Index (AQI) value and publishes the data. This AQI data is then used by CPCB to report the air quality status i.e good, satisfactory, moderate, poor, very poor and severe, etc. of a particular location and their related health impacts because of air pollution.
In 2024, Bangladesh's capital Dhaka had a pollution index score of ****, the highest among megacities in the Asia-Pacific region. In contrast, Japan's capital Tokyo had a pollution index score of **** that year. Megacities on course for growth The United Nations defines megacities as cities with over ten million inhabitants. The population living in megacities has doubled in size in the last twenty years and is expected to rise even more until 2035. Today, the Asia-Pacific region is home to the highest number of megacities, with China and India alone accounting for around half of all megacities worldwide. At the same time, only half of the population in Asia is living in cities. This figure is also expected to rise exponentially over the next years, especially with much of the younger population migrating to larger cities. The growth of megacities and their higher population densities bring along several environmental problems. Exposure to pollution in India The most populated cities in APAC are located in Japan, China and India. As seen above, India's capital also falls among the top three most polluted megacities in the region and ranks second among the most polluted capital cities worldwide with an average PM2.5 concentration. As one of the fastest emerging economies in the world, India's rapid urbanization and industrialization have led to high pollution rates in different areas. The volume of emissions from coal-fired power plants has led to electricity and heat accounting for the largest share of greenhouse gas emissions in India. The country is also among the nations with the highest population share exposed to hazardous concentrations of air pollution worldwide.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
Many world cities have been going through thermal state intensification induced by the uncertain growth of impervious land. To address this challenge, one of the megacities of South Asia, Bengaluru (India), facing intense urbanization transformation, has been taken up for detailed investigations. Three decadal (1989–2019) patterns and magnitude of natural coverage and its influence on the thermal state are studied in this research for assisting urban planners in adopting mitigation measures to achieve sustainable development in the megacity. The main aim of this research is to monitor the surface urban cool island (SUCI) in Bengaluru city, one of the booming megacities in India, using Landsat data from 1989 to 2019. This study further focused on the analysis of land surface temperature (LST), bare surface (BS), impervious surface (IS), and vegetation surface (VS). The SUCI intensity (SUCII) is examined through the LST difference based on the classified categories of land use/land cover (LU/LC) using urban-rural grid zones. In addition, we have proposed a modified approach in the form of ISBS fraction ratio (ISBS–FR) to cater to the state of urbanization. Furthermore, the relationship between LST and ISBS–FR and the magnitude of the ISBS–FR is also analyzed. The rural zone is assumed based on
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
The Housing Price Index in India is a statistical measure designed to reflect the changes in housing prices across various regions. It is calculated by the Reserve Bank of India (RBI) using data from housing transactions, which include registration documents and mortgage data from banks and housing finance companies. The HPI is constructed using a base year, and the price levels of that base year are set at 100. Changes in the index from the base year reflect how housing prices have increased or decreased. The Reserve Bank compiles quarterly house price index (HPI) (base: 2010-11=100) for ten major cities, viz., Mumbai, Delhi, Chennai, Kolkata, Bengaluru, Lucknow, Ahmedabad, Jaipur, Kanpur and Kochi. Based on these city indices, the average house price index represents all of India's house price movements. The Housing Price Index (HPI) is a critical economic indicator that measures the changes in residential housing prices over time. In India, the HPI is an essential tool used by policymakers, economists, real estate developers, investors, and homebuyers to gauge the trends in the real estate market. The HPI helps track the inflation or deflation in the housing market, thus providing insights into the economy's overall health.
Goal 11: Make cities and human settlements inclusive, safe, resilient and sustainableHalf of humanity – 3.5 billion people – lives in cities today. By 2030, almost 60% of the world’s population will live in urban areas.828 million people live in slums today and the number keeps rising.The world’s cities occupy just 2% of the Earth’s land, but account for 60 – 80% of energy consumption and 75% of carbon emissions. Rapid urbanization is exerting pressure on fresh water supplies, sewage, the living environment, and public health. But the high density of cities can bring efficiency gains and technological innovation while reducing resource and energy consumption.Cities have the potential to either dissipate the distribution of energy or optimise their efficiency by reducing energy consumption and adopting green – energy systems. For instance, Rizhao, China has turned itself into a solar – powered city; in its central districts, 99% of households already use solar water heaters.68% of India’s total population lives in rural areas (2013-14).By 2030, India is expected to be home to 6 mega-cities with populations above 10 million. Currently 17% of India’s urban population lives in slums.Data source: https://niti.gov.in/sites/default/files/SDG-India-Index-2.0_27-Dec.pdfPlease find detailed metadata here.This web layer is offered by Esri India, for ArcGIS Online subscribers, If you have any questions or comments, please let us know via content@esri.in.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
The dataset contains air quality information for various cities across India. It includes parameters such as Air Quality Index (AQI), concentrations of particulate matter (PM2.5 and PM10), ozone (O3), nitrogen dioxide (NO2), sulfur dioxide (SO2), carbon monoxide (CO), as well as geographical coordinates and time stamps. This dataset enables analysis and comparison of air quality levels among different cities, aiding in understanding environmental health impacts and informing policy decisions.
As of September 2024, Mumbai had the highest cost of living among other cities in the country, with an index value of ****. Gurgaon, a satellite city of Delhi and part of the National Capital Region (NCR) followed it with an index value of ****. What is cost of living? The cost of living varies depending on geographical regions and factors that affect the cost of living in an area include housing, food, utilities, clothing, childcare, and fuel among others. The cost of living is calculated based on different measures such as the consumer price index (CPI), living cost indexes, and wage price index. CPI refers to the change in the value of consumer goods and services. The wage price index, on the other hand, measures the change in labor services prices due to market pressures. Lastly, the living cost indexes calculate the impact of changing costs on different households. The relationship between wages and costs determines affordability and shifts in the cost of living. Mumbai tops the list Mumbai usually tops the list of most expensive cities in India. As the financial and entertainment hub of the country, Mumbai offers wide opportunities and attracts talent from all over the country. It is the second-largest city in India and has one of the most expensive real estates in the world.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
Analysis of ‘Swiggy Restaurants Dataset of Metro Cities’ provided by Analyst-2 (analyst-2.ai), based on source dataset retrieved from https://www.kaggle.com/aniruddhapa/swiggy-restaurants-dataset-of-metro-cities on 28 January 2022.
--- Dataset description provided by original source is as follows ---
This dataset contains swiggy registered restaurants details of major metropoliton cities of India. I have considered only metropoliton cities with population 4.5 million. As per the Census of India 2011 definition of more than 4 million population, some of the major Metropolitan Cities in India are:
Mumbai (more than 18 Million) Delhi (more than 16 Million) Kolkata (more than 14 Million) Chennai (more than 8.6 million) Bangalore (around 8.5 million) Hyderabad (around 7.6 million) Ahmedabad (around 6.3 million) Pune (around 5.05 million) Surat (around 4.5 million)
I have scrapped the data using python. It may not have all the restaurants of a particular city because if during webscrapping any restaurant has not enabled swiggy as their delivery partner, that restaurant's details will not be scrapped. Though I have scrapped same cities multiple times, to include maximum restaurant details. The data is collected on 12th Jan 2022.
Thank you swiggy for the dataset.
Your data will be in front of the world's largest data science community. What questions do you want to see answered?
--- Original source retains full ownership of the source dataset ---
In the first half of 2024, the existing stock for warehousing in the Mumbai in India accounted for around **** million square meters. It ranks the top among major Indian cities. The Indian warehousing stock was at **** million square meters during the same period.
Delhi was the largest city in terms of number of inhabitants in India in 2023.The capital city was estimated to house nearly 33 million people, with Mumbai ranking second that year. India's population estimate was 1.4 billion, ahead of China that same year.