The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The digital data in this DFIRM is in the PA State Plane North, NAD83 feet coordinate system (FIPS 3701).

This data set is a digital soil survey and generally is the most detailed level of soil geographic data developed by the National Cooperative Soil Survey. The information was prepared by digitizing maps, by compiling information onto a planimetric correct base and digitizing, or by revising digitized maps using remotely sensed and other information. This data set consists of georeferenced digital map data and computerized attribute data. The map data are in a soil survey area extent format and include a detailed, field verified inventory of soils and miscellaneous areas that normally occur in a repeatable pattern on the landscape and that can be cartographically shown at the scale mapped. A special soil features layer (point and line features) is optional. This layer displays the location of features too small to delineate at the mapping scale, but they are large enough and contrasting enough to significantly influence use and management. The soil map units are linked to attributes in the National Soil Information System relational database, which gives the proportionate extent of the component soils and their properties.

This data set is a digital soil survey and generally is the most detailed level of soil geographic data developed by the National Cooperative Soil Survey. The information was prepared by digitizing maps, by compiling information onto a planimetric correct base and digitizing, or by revising digitized maps using remotely sensed and other information. This data set consists of georeferenced digital map data and computerized attribute data. The map data are in a soil survey area extent format and include a detailed, field verified inventory of soils and miscellaneous areas that normally occur in a repeatable pattern on the landscape and that can be cartographically shown at the scale mapped. A special soil features layer (point and line features) is optional. This layer displays the location of features too small to delineate at the mapping scale, but they are large enough and contrasting enough to significantly influence use and management. The soil map units are linked to attributes in the National Soil Information System relational database, which gives the proportionate extent of the component soils and their properties.

This parcels data set is a spatial representation of municipal tax lots for Mercer County, New Jersey that have been extracted from the NJ statewide parcels composite by the NJ Office of Information Technology, Office of GIS (NJOGIS). Parcels at county boundaries have been modified to correspond with the NJ county boundaries and the parcels in adjacent counties.Each parcel contains a field named PAMS_PIN based on a concatenation of the county/municipality code, block number, lot number and qualification code. Using the PAMS_PIN, the dataset can be joined to the MOD-IV database table that contains supplementary attribute information regarding lot ownership and characteristics. Due to irregularities in the data development process, duplicate PAMS_PIN values exist in the parcel records. Users should avoid joining MOD-IV database table records to all parcel records with duplicate PAMS_PINs because of uncertainty regarding whether the MOD-IV records will join to the correct parcel records. There are also parcel records with unique PAMS_PIN values for which there are no corresponding records in the MOD-IV database tables. This is mostly due to the way data are organized in the MOD-IV database.The polygons delineated in the dataset do not represent legal boundaries and should not be used to provide a legal determination of land ownership. Parcels are not survey data and should not be used as such.The MOD-IV (Tax Assessor's) table for the county is packaged together with the parcels as one download. The MOD-IV system provides for uniform preparation, maintenance, presentation and storage of property tax information required by the Constitution of the State of New Jersey, New Jersey Statutes and rules promulgated by the Director of the Division of Taxation. MOD-IV maintains and updates all assessment records and produces all statutorily required tax lists for property tax bills. This list accounts for all parcels of real property as delineated and identified on each municipality's official tax map, as well as taxable values and descriptive data for each parcel. Tax List records were received as raw data from the Taxation Team of NJOIT which collected source information from municipal tax assessors and created the statewide table. This table was subsequently processed for ease of use with NJ tax parcel spatial data and split into an individual table for each county.***NOTE*** For users who incorporate NJOGIS services into web maps and/or web applications, please sign up for the NJ Geospatial Forum discussion listserv for early notification of service changes. Visit https://nj.gov/njgf/about/listserv/ for more information.

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national filewith no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent dataset, or they can be combined to cover the entire nation. The Area Hydrography Shapefile contains the geometry and attributes of both perennial and intermittent area hydrography features, including ponds, lakes, oceans, swamps (up to the U.S. nautical three-mile limit), glaciers, and the area covered by large rivers, streams, and/or canals that are represented as double-line drainage. Single-line drainage water features can be found in the Linear Hydrography Shapefile (LINEARWATER.shp). Linear water features includes single-line drainage water features and artificial path features, where they exist, that run through double-line drainage features such as rivers, streams, and/or canals, and serve as a linear representation of these features.

About this dataset

Context

The dataset tabulates the Mercer population distribution across 18 age groups. It lists the population in each age group along with the percentage population relative of the total population for Mercer. The dataset can be utilized to understand the population distribution of Mercer by age. For example, using this dataset, we can identify the largest age group in Mercer.

Key observations

The largest age group in Mercer, PA was for the group of age 60 to 64 years years with a population of 197 (10.67%), according to the ACS 2019-2023 5-Year Estimates. At the same time, the smallest age group in Mercer, PA was the 80 to 84 years years with a population of 12 (0.65%). Source: U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group in consideration
• Population: The population for the specific age group in the Mercer is shown in this column.
• % of Total Population: This column displays the population of each age group as a proportion of Mercer total population. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Mercer Population by Age. You can refer the same here

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. The Address Ranges Feature Shapefile (ADDRFEAT.dbf) contains the geospatial edge geometry and attributes of all unsuppressed address ranges for a county or county equivalent area. The term "address range" refers to the collection of all possible structure numbers from the first structure number to the last structure number and all numbers of a specified parity in between along an edge side relative to the direction in which the edge is coded. Single-address address ranges have been suppressed to maintain the confidentiality of the addresses they describe. Multiple coincident address range feature edge records are represented in the shapefile if more than one left or right address ranges are associated to the edge. The ADDRFEAT shapefile contains a record for each address range to street name combination. Address range associated to more than one street name are also represented by multiple coincident address range feature edge records. Note that the ADDRFEAT shapefile includes all unsuppressed address ranges compared to the All Lines Shapefile (EDGES.shp) which only includes the most inclusive address range associated with each side of a street edge. The TIGER/Line shapefile contain potential address ranges, not individual addresses. The address ranges in the TIGER/Line Files are potential ranges that include the full range of possible structure numbers even though the actual structures may not exist.

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national filewith no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent dataset, or they can be combined to cover the entire nation. The Area Hydrography Shapefile contains the geometry and attributes of both perennial and intermittent area hydrography features, including ponds, lakes, oceans, swamps (up to the U.S. nautical three-mile limit), glaciers, and the area covered by large rivers, streams, and/or canals that are represented as double-line drainage. Single-line drainage water features can be found in the Linear Hydrography Shapefile (LINEARWATER.shp). Linear water features includes single-line drainage water features and artificial path features, where they exist, that run through double-line drainage features such as rivers, streams, and/or canals, and serve as a linear representation of these features.

This dataset includes radiocarbon (¹⁴C) and stable carbon isotope (δ¹³C) data for a sediment core from Mercer Subglacial Lake. In addition, this dataset includes ¹⁴C and δ¹³C for dissolved organic carbon, dissolved inorganic carbon, and particulate organic carbon from the Mercer Subglacial Lake water column.

The City of Mercer Island GIS base map data for public download (base map, map grid, address, building, property line, parcel line, docks, right-of-way, trails, parks, street, road edge, city boundary)

This dataset includes the following measurements from Niskin casts at Mercer Subglacial Lake as part of the SALSA project: noble gases and their isotopes, d13C-DIC, Ge, 87Sr/86Sr, and 234U/238U

This dataset contains bulk sediment properties measurements from cores collected from Mercer Subglacial Lake by the SALSA project. Included are: physical properties (bulk density, mass water content, porosity, shear strength, particle size distribution, and mineralogy); carbon (inorganic and organic); iron (ascorbate- and dithionite-extractable); and sulfur (acid-volatile and chromium-reducible).

This dataset provides information about the number of properties, residents, and average property values for Mercer West Middlesex Road cross streets in Mercer, PA.

From the site: "This data set is a digital soil survey and generally is the most detailed level of soil geographic data developed by the National Cooperative Soil Survey. The information was prepared by digitizing maps, by compiling information onto a planimetric correct base and digitizing, or by revising digitized maps using remotely sensed and other information. This data set consists of georeferenced digital map data and computerized attribute data. The map data are in a soil survey area extent format and include a detailed, field verified inventory of soils and miscellaneous areas that normally occur in a repeatable pattern on the landscape and that can be cartographically shown at the scale mapped. A special soil features layer (point and line features) is optional. This layer displays the location of features too small to delineate at the mapping scale, but they are large enough and contrasting enough to significantly influence use and management. The soil map units are linked to attributes in the National Soil Information System relational database, which gives the proportionate extent of the component soils and their properties."

Google Mobility Changes: Retails & Recreation: United States: Pennsylvania: Mercer County data was reported at 1.000 % in 15 Oct 2022. This records a decrease from the previous number of 2.000 % for 14 Oct 2022. Google Mobility Changes: Retails & Recreation: United States: Pennsylvania: Mercer County data is updated daily, averaging 1.000 % from Feb 2020 (Median) to 15 Oct 2022, with 955 observations. The data reached an all-time high of 41.000 % in 23 Dec 2021 and a record low of -96.000 % in 25 Dec 2020. Google Mobility Changes: Retails & Recreation: United States: Pennsylvania: Mercer County data remains active status in CEIC and is reported by Google LLC. The data is categorized under Global Database’s United States – Table US.Google.GM: Mobility Trends: Retail & Recreation (Discontinued).

This dataset contains water column biogeochemical properties measured on discrete samples collected from Mercer Subglacial Lake by the SALSA project. Data included are: specific conductance; carbonic acid system parameters (total alkalinity, total inorganic carbon, and pH); water stable isotopes (δ2H and δ18O); dissolved gases (oxygen, methane, nitrous oxide, and hydrogen); dissolved nutrients (ammonium, nitrite and phosphate), major anions (including nitrate) and cations; size-fractionated colloidal and dissolved trace elements); dissolved organic carbon; and microbial cell and virus-like particle counts.

This dataset includes binned conductivity, temperature and pressure measurements from Mercer Subglacial Lake and the borehole drilled to access the lake by the SALSA project, as well as additional physical parameters derived from these measurements using the TEOS-10 equation of state.

This parcels data set is a spatial representation of municipal tax lots for Mercer County, New Jersey that have been extracted from the NJ statewide parcels composite by the NJ Office of Information Technology, Office of GIS (NJOGIS). Parcels at county boundaries have been modified to correspond with the NJ county boundaries and the parcels in adjacent counties.Each parcel contains a field named PAMS_PIN based on a concatenation of the county/municipality code, block number, lot number and qualification code. Using the PAMS_PIN, the dataset can be joined to the MOD-IV database table that contains supplementary attribute information regarding lot ownership and characteristics. Due to irregularities in the data development process, duplicate PAMS_PIN values exist in the parcel records. Users should avoid joining MOD-IV database table records to all parcel records with duplicate PAMS_PINs because of uncertainty regarding whether the MOD-IV records will join to the correct parcel records. There are also parcel records with unique PAMS_PIN values for which there are no corresponding records in the MOD-IV database tables. This is mostly due to the way data are organized in the MOD-IV database.The polygons delineated in the dataset do not represent legal boundaries and should not be used to provide a legal determination of land ownership. Parcels are not survey data and should not be used as such.The MOD-IV (Tax Assessor's) table for the county is packaged together with the parcels as one download. The MOD-IV system provides for uniform preparation, maintenance, presentation and storage of property tax information required by the Constitution of the State of New Jersey, New Jersey Statutes and rules promulgated by the Director of the Division of Taxation. MOD-IV maintains and updates all assessment records and produces all statutorily required tax lists for property tax bills. This list accounts for all parcels of real property as delineated and identified on each municipality's official tax map, as well as taxable values and descriptive data for each parcel. Tax List records were received as raw data from the Taxation Team of NJOIT which collected source information from municipal tax assessors and created the statewide table. This table was subsequently processed for ease of use with NJ tax parcel spatial data and split into an individual table for each county.***NOTE*** For users who incorporate NJOGIS services into web maps and/or web applications, please sign up for the NJ Geospatial Forum discussion listserv for early notification of service changes. Visit https://nj.gov/njgf/about/listserv/ for more information.

This dataset provides information about the number of properties, residents, and average property values for Clintonville Road cross streets in Mercer, PA.

Employed in Mercer County, KY was 10347.00000 Persons in April of 2025, according to the United States Federal Reserve. Historically, Employed in Mercer County, KY reached a record high of 10876.00000 in June of 1998 and a record low of 8441.00000 in February of 1991. Trading Economics provides the current actual value, an historical data chart and related indicators for Employed in Mercer County, KY - last updated from the United States Federal Reserve on July of 2025.