2-foot and 10-foot elevation contours derived from the Spring 2012 Minnesota Department of Natural Resources (MN DNR) LiDAR dataset.

The elevation contours in this dataset have a 2-foot (ft) interval and were derived from a digital elevation model (DEM) of beach topography and near-shore bathymetry of Minnesota Point near the Superior Entry of Lake Superior, Duluth, Minnesota. The DEM used to derive the contours has a 10-meter (m; 32.8084 feet) cell size and was created from a LAS dataset of terrestrial light detection and ranging (lidar) data representing the beach topography and sonar data representing the bathymetry to approximately 1 kilometer (0.62 miles) offshore, for an approximately 2.27 square kilometer surveyed area. Lidar data were collected using a boat mounted Velodyne unit. Multibeam sonar data were collected using a Norbit integrated wide band multibeam system compact (iWBMSc) sonar unit. Single-beam sonar data were collected using a Ceescope sonar unit. All elevation data were collected September 15-17, 2021. Methodology similar to Wagner, D.M., Lund, J.W., and Sanks, K.M., 2020 was used.

Fugro Horizons Inc. acquired highly accurate Light Detection and Ranging (lidar) elevation data for the Twin Cities metropolitan region in east-central Minnesota in Spring and Fall 2011, with some reflights in Spring 2012. The data cover Anoka, Benton, Carver, Dakota, Goodhue, Hennepin, Isanti, Kanabec, Meeker, Mille Lacs, Morrison, Ramsey, Scott, Sherburne and Washington counties.

Most of the data was collected at 1.5 points/square meter. Smaller areas were collected with 2 points/square meter and with 8 points/square meter:
1. 1.5 points/square meter covers Morrison, Mille Lacs, Benton, Isanti, Sherburne, Anoka, Meeker, Hennepin, Washington, Carver, Scott, and Goodhue counties.
2. 2 points/square meter covers the Dakota Block (southern 2/3 of Dakota County)
3. 8 points/square meter covers portions of Minneapolis/St. Paul and the City of Maple Grove
See map of block boundaries: https://www.mngeo.state.mn.us/chouse/elevation/metro_data_delivery_dates.pdf

Data are in the UTM Zone 15 coordinate system, NAD83 (HARN), NAVD88 Geoid09, meters. The tiling scheme is 16th USGS 1:24,000 quadrangle tiles.

The vendor delivered the data to the Minnesota Department of Natural Resources (DNR) in several formats:

1. One-meter digital elevation model
2. Edge-of-water breaklines
3. Classified LAS formatted point cloud data

DNR staff quality-checked the data and created three additional products: two-foot contours, building outlines and hillshades.

This metadata record was created at the Minnesota Geospatial Information Office using information supplied by the vendor and by DNR.

2-foot and 10-foot elevation contours derived from the Spring 2012 Minnesota Department of Natural Resources (MN DNR) LiDAR dataset.

The elevation contours in this dataset have a 2-foot (ft) interval and were derived from a digital elevation model (DEM) of beach topography and near-shore bathymetry of Minnesota Point near the Duluth Entry of Lake Superior, Duluth, Minnesota. The DEM has a 10-meter (m; 32.8084 feet) cell size and was created from a LAS dataset of terrestrial light detection and ranging (lidar) data representing the beach topography, and single-beam and multibeam sonar data representing the bathymetry. The survey area extended approximately 0.85 kilometers (0.5 miles) offshore, for an approximate 1.87 square kilometer surveyed area. Lidar data were collected using a boat mounted Velodyne VLP-16 unit. Multibeam sonar data were collected using a Norbit integrated wide band multibeam system compact (iWBMSc) sonar unit. Single-beam sonar data were collected using a Ceescope sonar unit. All elevation data were collected June 22-24, 2021. Methodology similar to Wagner, D.M., Lund, J.W., and Sanks, K.M., 2020 was used.

Digital Elevation Model of Scott County, Minnesota.

The elevation contours in this dataset have a 2-foot (ft) interval and were derived from a digital elevation model (DEM) of beach topography and near-shore bathymetry of Lake Superior at the Duluth entry, Duluth, Minnesota. The DEM has a 5-meter (m; 16.404 feet) cell size and was created from a LAS dataset of terrestrial light detection and ranging (lidar) data representing the beach topography, and multibeam sonar data representing the bathymetry. The survey area extended approximately 0.85 kilometer (0.5 miles) offshore, for an approximately 1.87 square kilometer surveyed area. Lidar data were collected September 23, 2020 using a boat mounted Velodyne unit. Multibeam sonar data were collected September 22-23, 2020 using a Norbit integrated wide band multibeam system compact (iWBMSc) sonar unit.

This dataset contains a collection of features that describe the physical terrain.

Link to the ScienceBase Item Summary page for the item described by this metadata record. Service Protocol: Link to the ScienceBase Item Summary page for the item described by this metadata record. Application Profile: Web Browser. Link Function: information

Link to the ScienceBase Item Summary page for the item described by this metadata record. Service Protocol: Link to the ScienceBase Item Summary page for the item described by this metadata record. Application Profile: Web Browser. Link Function: information

Link to the ScienceBase Item Summary page for the item described by this metadata record. Service Protocol: Link to the ScienceBase Item Summary page for the item described by this metadata record. Application Profile: Web Browser. Link Function: information

Countour lines from LiDAR data - 10' and 2' lines. Data within Carlton County, MN as collected by State of MN LiDAR project. More information about the LiDAR project can be found at http://www.mngeo.state.mn.us/committee/elevation/mn_elev_mapping.html

Link to the ScienceBase Item Summary page for the item described by this metadata record. Service Protocol: Link to the ScienceBase Item Summary page for the item described by this metadata record. Application Profile: Web Browser. Link Function: information

Layered GeoPDF 7.5 Minute Quadrangle Map. Layers of geospatial data include orthoimagery, roads, grids, geographic names, elevation contours, hydrography, and other selected map features.

CONTOUR VTPK FOR EUROPE

Layered GeoPDF 7.5 Minute Quadrangle Map. Layers of geospatial data include orthoimagery, roads, grids, geographic names, elevation contours, hydrography, and other selected map features.

Layered GeoPDF 7.5 Minute Quadrangle Map. Layers of geospatial data include orthoimagery, roads, grids, geographic names, elevation contours, hydrography, and other selected map features.

Layered GeoPDF 7.5 Minute Quadrangle Map. Layers of geospatial data include orthoimagery, roads, grids, geographic names, elevation contours, hydrography, and other selected map features.

Layered GeoPDF 7.5 Minute Quadrangle Map. Layers of geospatial data include orthoimagery, roads, grids, geographic names, elevation contours, hydrography, and other selected map features.

Layered GeoPDF 7.5 Minute Quadrangle Map. Layers of geospatial data include orthoimagery, roads, grids, geographic names, elevation contours, hydrography, and other selected map features.