The Mapping Control Database (MCPD) is a database of mapping control covering Montana. The control were submitted by registered land surveyors or mapping professionals.

Full metadata available at https://mslservices.mt.gov/Geographic_Information/Data/DataList/datalist_Details.aspx?did=62c565ec-de6e-11e6-bf01-fe55135034f3.

The USGS Protected Areas Database of the United States (PAD-US) is the nation's inventory of protected areas, including public open space and voluntarily provided, private protected areas, identified as an A-16 National Geospatial Data Asset in the Cadastral Theme (http://www.fgdc.gov/ngda-reports/NGDA_Datasets.html). PAD-US is an ongoing project with several published versions of a spatial database of areas dedicated to the preservation of biological diversity, and other natural, recreational or cultural uses, managed for these purposes through legal or other effective means. The geodatabase maps and describes public open space and other protected areas. Most areas are public lands owned in fee; however, long-term easements, leases, and agreements or administrative designations documented in agency management plans may be included. The PAD-US database strives to be a complete “best available” inventory of protected areas (lands and waters) including data provided by managing agencies and organizations. The dataset is built in collaboration with several partners and data providers (http://gapanalysis.usgs.gov/padus/stewards/). See Supplemental Information Section of this metadata record for more information on partnerships and links to major partner organizations. As this dataset is a compilation of many data sets; data completeness, accuracy, and scale may vary. Federal and state data are generally complete, while local government and private protected area coverage is about 50% complete, and depends on data management capacity in the state. For completeness estimates by state: http://www.protectedlands.net/partners. As the federal and state data are reasonably complete; focus is shifting to completing the inventory of local gov and voluntarily provided, private protected areas. The PAD-US geodatabase contains over twenty-five attributes and four feature classes to support data management, queries, web mapping services and analyses: Marine Protected Areas (MPA), Fee, Easements and Combined. The data contained in the MPA Feature class are provided directly by the National Oceanic and Atmospheric Administration (NOAA) Marine Protected Areas Center (MPA, http://marineprotectedareas.noaa.gov ) tracking the National Marine Protected Areas System. The Easements feature class contains data provided directly from the National Conservation Easement Database (NCED, http://conservationeasement.us ) The MPA and Easement feature classes contain some attributes unique to the sole source databases tracking them (e.g. Easement Holder Name from NCED, Protection Level from NOAA MPA Inventory). The "Combined" feature class integrates all fee, easement and MPA features as the best available national inventory of protected areas in the standard PAD-US framework. In addition to geographic boundaries, PAD-US describes the protection mechanism category (e.g. fee, easement, designation, other), owner and managing agency, designation type, unit name, area, public access and state name in a suite of standardized fields. An informative set of references (i.e. Aggregator Source, GIS Source, GIS Source Date) and "local" or source data fields provide a transparent link between standardized PAD-US fields and information from authoritative data sources. The areas in PAD-US are also assigned conservation measures that assess management intent to permanently protect biological diversity: the nationally relevant "GAP Status Code" and global "IUCN Category" standard. A wealth of attributes facilitates a wide variety of data analyses and creates a context for data to be used at local, regional, state, national and international scales. More information about specific updates and changes to this PAD-US version can be found in the Data Quality Information section of this metadata record as well as on the PAD-US website, http://gapanalysis.usgs.gov/padus/data/history/.) Due to the completeness and complexity of these data, it is highly recommended to review the Supplemental Information Section of the metadata record as well as the Data Use Constraints, to better understand data partnerships as well as see tips and ideas of appropriate uses of the data and how to parse out the data that you are looking for. For more information regarding the PAD-US dataset please visit, http://gapanalysis.usgs.gov/padus/. To find more data resources as well as view example analysis performed using PAD-US data visit, http://gapanalysis.usgs.gov/padus/resources/. The PAD-US dataset and data standard are compiled and maintained by the USGS Gap Analysis Program, http://gapanalysis.usgs.gov/ . For more information about data standards and how the data are aggregated please review the “Standards and Methods Manual for PAD-US,” http://gapanalysis.usgs.gov/padus/data/standards/ .

Carbon County Cadastral Data ResourcesA snapshot of property and parcel data for June 2022.Department of Revenue Orion SQL property record database provided as both an SQL database and as tables in a file geodatabase.File Geodatabase and Shapefile options for parcel polygon GIS data.Visit the Montana State Library Cadastral MSDI page for more information on cadastral data and Orion property database : MSDI Cadastral (mt.gov)The Montana Cadastral Framework shows the taxable parcels and tax-exempt parcels for most of Montana. The parcels contain selected information such as owner names, property and owner addresses, assessed value, agricultural use, and tax district information that were copied from the Montana Department of Revenue's ORION tax appraisal database. The data are maintained by the MT Department of Revenue, except for Ravalli, Silver Bow, Missoula, Flathead and Yellowstone counties that are maintained by the individual counties. The Revenue and county data are integrated by Montana State Library staff. Each parcel contains an attribute called ParcelID (geocode) that is the parcel identifier. View a pdf map of the counties that were updated this month here: https://ftpgeoinfo.msl.mt.gov/Data/Spatial/MSDI/Cadastral/Parcels/Statewide/MonthlyCadastralUpdateMap.pdf The parcel boundaries were aligned to fit with the Bureau of Land Management Geographic Coordinate Database (GCDB) of public land survey coordinates. Parcels whose legal descriptions consisted of aliquot parts of the public land survey system were created from the GCDB coordinates by selecting and, when necessary, subdividing public land survey entities. Other parcels were digitized from paper maps and the data from each map were transformed to fit with the appropriate GCDB boundaries.

The Digital Geologic-GIS Map of Yellowstone National Park and Vicinity, Wyoming, Montana, and Idaho is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) an ESRI file geodatabase (yell_geology.gdb), a 2.) Open Geospatial Consortium (OGC) geopackage, and 3.) 2.2 KMZ/KML file for use in Google Earth, however, this format version of the map is limited in data layers presented and in access to GRI ancillary table information. The file geodatabase format is supported with a 1.) ArcGIS Pro 3.X map file (.mapx) file (yell_geology.mapx) and individual Pro 3.X layer (.lyrx) files (for each GIS data layer). The OGC geopackage is supported with a QGIS project (.qgz) file. Upon request, the GIS data is also available in ESRI shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) a readme file (yell_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (yell_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (yell_geology_metadata_faq.pdf). Also included is a zip containing a Montana State University Master's thesis and supporting documents and data. The thesis focuses on addressing map boundary inconsistencies and remapping portions of the park. Data and documents supporting the thesis are 1.) a geodatabase containing field data points, 2.) a collection of documents describing field sites, 3.) spreadsheets containing geochemical analysis results, and 4.) photographs taken during field work. Please read the yell_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. Google Earth software is available for free at: https://www.google.com/earth/versions/. QGIS software is available for free at: https://www.qgis.org/en/site/. Users are encouraged to only use the Google Earth data for basic visualization, and to use the GIS data for any type of data analysis or investigation. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri.htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: U.S. Geological Survey, Montana Bureau of Mines and Geology and Montana State University. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (yell_geology_metadata.txt or yell_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:125,000 and United States National Map Accuracy Standards features are within (horizontally) 63.5 meters or 208.3 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in Google Earth, ArcGIS Pro, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

This data set depicts federal lands having restrictions on access or activities -- that is, lands mangaed by the National Park Service, Defense Department, or Energy Department -- in western North America. The data set was created by reformatting and merging state- and province-based ownership data layers originally acquired from diverse sources (including state GAP programs, USBLM state offices and other sources). For each original dataset 3 additional fields, "Pub_Pvt", "CA_OWN", and "SOURCE" were added and populated based on the specific ownership information contained in the source data. The original coverages were then merged based on the "CA_OWN" field. Finally, NPS, DOD, and DOE lands were selected out of the ownership layer. All work was completed in AcMap 8.3. This product and all source data are available online from SAGEMAP: http://sagemap.wr.usgs.gov.

Park County Cadastral Data ResourcesA snapshot of property and parcel data for June 2022.Department of Revenue Orion SQL property record database provided as both an SQL database and as tables in a file geodatabase.File Geodatabase and Shapefile options for parcel polygon GIS data.Visit the Montana State Library Cadastral MSDI page for more information on cadastral data and Orion property database : MSDI Cadastral (mt.gov)The Montana Cadastral Framework shows the taxable parcels and tax-exempt parcels for most of Montana. The parcels contain selected information such as owner names, property and owner addresses, assessed value, agricultural use, and tax district information that were copied from the Montana Department of Revenue's ORION tax appraisal database. The data are maintained by the MT Department of Revenue, except for Ravalli, Silver Bow, Missoula, Flathead and Yellowstone counties that are maintained by the individual counties. The Revenue and county data are integrated by Montana State Library staff. Each parcel contains an attribute called ParcelID (geocode) that is the parcel identifier. View a pdf map of the counties that were updated this month here: https://ftpgeoinfo.msl.mt.gov/Data/Spatial/MSDI/Cadastral/Parcels/Statewide/MonthlyCadastralUpdateMap.pdf The parcel boundaries were aligned to fit with the Bureau of Land Management Geographic Coordinate Database (GCDB) of public land survey coordinates. Parcels whose legal descriptions consisted of aliquot parts of the public land survey system were created from the GCDB coordinates by selecting and, when necessary, subdividing public land survey entities. Other parcels were digitized from paper maps and the data from each map were transformed to fit with the appropriate GCDB boundaries.

This dataset combines the work of several different projects to create a seamless data set for the contiguous United States. Data from four regional Gap Analysis Projects and the LANDFIRE project were combined to make this dataset. In the Northwestern United States (Idaho, Oregon, Montana, Washington and Wyoming) data in this map came from the Northwest Gap Analysis Project. In the Southwestern United States (Colorado, Arizona, Nevada, New Mexico, and Utah) data used in this map came from the Southwest Gap Analysis Project. The data for Alabama, Florida, Georgia, Kentucky, North Carolina, South Carolina, Mississippi, Tennessee, and Virginia came from the Southeast Gap Analysis Project and the California data was generated by the updated California Gap land cover project. The Hawaii Gap Analysis project provided the data for Hawaii. In areas of the county (central U.S., Northeast, Alaska) that have not yet been covered by a regional Gap Analysis Project, data from the Landfire project was used. Similarities in the methods used by these projects made possible the combining of the data they derived into one seamless coverage. They all used multi-season satellite imagery (Landsat ETM+) from 1999-2001 in conjunction with digital elevation model (DEM) derived datasets (e.g. elevation, landform) to model natural and semi-natural vegetation. Vegetation classes were drawn from NatureServe’s Ecological System Classification (Comer et al. 2003) or classes developed by the Hawaii Gap project. Additionally, all of the projects included land use classes that were employed to describe areas where natural vegetation has been altered. In many areas of the country these classes were derived from the National Land Cover Dataset (NLCD). For the majority of classes and, in most areas of the country, a decision tree classifier was used to discriminate ecological system types. In some areas of the country, more manual techniques were used to discriminate small patch systems and systems not distinguishable through topography. The data contains multiple levels of thematic detail. At the most detailed level natural vegetation is represented by NatureServe’s Ecological System classification (or in Hawaii the Hawaii GAP classification). These most detailed classifications have been crosswalked to the five highest levels of the National Vegetation Classification (NVC), Class, Subclass, Formation, Division and Macrogroup. This crosswalk allows users to display and analyze the data at different levels of thematic resolution. Developed areas, or areas dominated by introduced species, timber harvest, or water are represented by other classes, collectively refered to as land use classes; these land use classes occur at each of the thematic levels. Six layer files are included in the download packages to assist the user in displaying the data at each of the Thematic levels in ArcGIS.

The USGS Protected Areas Database of the United States (PAD-US) is the nation's inventory of protected areas, including public land and voluntarily provided private protected areas, identified as an A-16 National Geospatial Data Asset in the Cadastre Theme ( https://ngda-cadastre-geoplatform.hub.arcgis.com/ ). The PAD-US is an ongoing project with several published versions of a spatial database including areas dedicated to the preservation of biological diversity, and other natural (including extraction), recreational, or cultural uses, managed for these purposes through legal or other effective means. The database was originally designed to support biodiversity assessments; however, its scope expanded in recent years to include all open space public and nonprofit lands and waters. Most are public lands owned in fee (the owner of the property has full and irrevocable ownership of the land); however, permanent and long-term easements, leases, agreements, Congressional (e.g. 'Wilderness Area'), Executive (e.g. 'National Monument'), and administrative designations (e.g., 'Area of Critical Environmental Concern') documented in agency management plans are also included. The PAD-US strives to be a complete inventory of U.S. public land and other protected areas, compiling “best available” data provided by managing agencies and organizations. PAD-US provides a full inventory geodatabase, spatial analysis, statistics, data downloads, web services, poster maps, and data submissions included in efforts to track global progress toward biodiversity protection. PAD-US integrates spatial data to ensure public lands and other protected areas from all jurisdictions are represented. PAD-US version 4.0 includes new and updated data from the following data providers. All other data were transferred from previous versions of PAD-US. Federal updates - The USGS remains committed to updating federal fee owned lands data and major designation changes in regular PAD-US updates, where authoritative data provided directly by managing agencies are available or alternative data sources are recommended. Revisions associated with the federal estate in this version include updates to the Federal estate (fee ownership parcels, easement interest, management designations, and proclamation boundaries), with authoritative data from 7 agencies: Bureau of Land Management (BLM), U.S. Census Bureau (Census Bureau), Department of Defense (DOD), U.S. Fish and Wildlife Service (FWS), National Park Service (NPS), Natural Resources Conservation Service (NRCS), and the U.S. Forest Service (USFS). The federal theme in PAD-US is developed in close collaboration with the Federal Geographic Data Committee (FGDC) Federal Lands Working Group (FLWG, https://ngda-gov-units-geoplatform.hub.arcgis.com/pages/federal-lands-workgroup/ ). This includes improved the representation of boundaries and attributes for the National Park Service, U.S. Forest Service, Bureau of Land Management, and U.S. Fish and Wildlife Service lands, in collaboration with agency data-stewards, in response to feedback from the PAD-US Team and stakeholders. Additionally, National Cemetery boundaries were added using geospatial boundary data provided by the U.S. Department of Veterans Affairs and NASA boundaries were added using data contained in the USGS National Boundary Dataset (NBD). State Updates - USGS is committed to building capacity in the state data steward network and the PAD-US Team to increase the frequency of state land and NGO partner updates, as resources allow. State Lands Workgroup ( https://ngda-gov-units-geoplatform.hub.arcgis.com/pages/state-lands-workgroup ) is focused on improving protected land inventories in PAD-US, increase update efficiency, and facilitate local review. PAD-US 4.0 included updates and additions from the following seventeen states and territories: California (state, local, and nonprofit fee); Colorado (state, local, and nonprofit fee and easement); Georgia (state and local fee); Kentucky (state, local, and nonprofit fee and easement); Maine (state, local, and nonprofit fee and easement); Montana (state, local, and nonprofit fee); Nebraska (state fee); New Jersey (state, local, and nonprofit fee and easement); New York (state, local, and nonprofit fee and easement); North Carolina (state, local, and nonprofit fee); Pennsylvania (state, local, and nonprofit fee and easement); Puerto Rico (territory fee); Tennessee (land trust fee); Texas (state, local, and nonprofit fee); Virginia (state, local, and nonprofit fee); West Virginia (state, local, and nonprofit fee); and Wisconsin (state fee data). Additionally, the following datasets were incorporated from NGO data partners: Trust for Public Land (TPL) Parkserve (new fee and easement data); The Nature Conservancy (TNC) Lands (fee owned by TNC); TNC Northeast Secured Areas; Ducks Unlimited (land trust fee); and the National Conservation Easement Database (NCED). All state and NGO easement submissions are provided to NCED. For more information regarding the PAD-US dataset please visit, https://www.usgs.gov/programs/gap-analysis-project/science/protected-areas . For more information regarding the PAD-US dataset please visit, https://www.usgs.gov/programs/gap-analysis-project/science/protected-areas . For more information about data aggregation please review the PAD-US Data Manual available at https://www.usgs.gov/programs/gap-analysis-project/pad-us-data-manual . A version history of PAD-US updates is summarized below (See https://www.usgs.gov/programs/gap-analysis-project/pad-us-data-history/ for more information): 1) First posted - April 2009 (Version 1.0 - available from the PAD-US: Team pad-us@usgs.gov). 2) Revised - May 2010 (Version 1.1 - available from the PAD-US: Team pad-us@usgs.gov). 3) Revised - April 2011 (Version 1.2 - available from the PAD-US: Team pad-us@usgs.gov). 4) Revised - November 2012 (Version 1.3) https://doi.org/10.5066/F79Z92XD 5) Revised - May 2016 (Version 1.4) https://doi.org/10.5066/F7G73BSZ 6) Revised - September 2018 (Version 2.0) https://doi.org/10.5066/P955KPLE 7) Revised - September 2020 (Version 2.1) https://doi.org/10.5066/P92QM3NT 8) Revised - January 2022 (Version 3.0) https://doi.org/10.5066/P9Q9LQ4B 9) Revised - April 2024 (Version 4.0) https://doi.org/10.5066/P96WBCHS Comparing protected area trends between PAD-US versions is not recommended without consultation with USGS as many changes reflect improvements to agency and organization GIS systems, or conservation and recreation measure classification, rather than actual changes in protected area acquisition on the ground.

Greater Sage-Grouse Management Areas (habitat) in the Proposed Plan of the Great Basin Region, Idaho-SW Montana Sub-region, Greater Sage-grouse Environmental Impact Statement (EIS) as Priority, Important, and General. Management Areas were delineated by BLM, U.S. Forest Service, State of Idaho and the U.S. Fish and Wildlife Service based on considerations of sage-grouse occupancy, landscape, habitat and land use/adaptive management opportunities. This data was developed as the Administrative Draft Proposed Plan (ADPP). for the Great Basin Region, Idaho-SW Montana Sub-region, Greater Sage-grouse (Centrocercus urophasianus) Environmental Impact Statement (EIS). This layer was edited 5/7/2015 at the WO direction to add three areas of non-habitat in the Sagebrush Focal Areas as PHMA. See processing steps. Priority Habitat Management Areas (PHMA) have the highest conservation value based on various sage-grouse population and habitat considerations and reflect the most restrictive management designed to promote sage-grouse conservation. Important Habitat Management Areas (IHMA) are closely aligned with PHMA, but management is somewhat less restrictive, providing additional management flexibility. The General Habitat Management Areas (GHMA) designation is the least restrictive due to generally lower occupancy of sage-grouse and more marginal habitat conditions. A decision was made in September 2014 by the Washington Office that all sub-regions would use a consistent naming convention for identifying Habitat Management Areas (HMA). These are Priority Habitat Management Area (PHMA) and General Habitat Management Area (GHMA). The Idaho and Southwestern Montana sub-region has an additional HMA identified as Important Habitat Management Area (IHMA). Attributes in this layer were updated 9/26/2014. Core updated to PHMA, Important updated to IHMA, and General updated to GHMA. The layer was renamed from ManagementZones_Alt_G_05272014_Final to ManagementAreas_Alt_G_05272014_final. The field identifying the Management Areas was renamed from Management_Zone to Habitat_Management_Area. ManagementAreas_Alt_G_05272014_final renamed to Habitat_ADPP on 01212015. Field edits started with the Alt E map from DEIS (State of Idaho’s Alternative) as a baseline and were completed in December 2013. In subsequent discussions, the State and FWS Idaho Fish and Wildlife Office, expressed concerns about adding more areas to Core designation especially if outside the FWS PACs which were delineated prior to release of the DEIS. The final map used for the Proposed Plan reflects Management Zones (M.Z.s) delineations following multiple discussions between, BLM, FS, FWS and the State. Some additional areas in south central Idaho, Mountain Home, and Weiser area were added as GHMA, which are not reflected in the Alt D or E map. These were typically annual grassland areas from the Key Habitat Map that had been previously excluded from the initial PPH/PGH model. These areas have restoration potential or involve past or ongoing restoration efforts. “Donut holes” of less than 500 acres located inside a larger matrix were classified the same as the surrounding matrix. Snapping of PHMA, IHMA, or GHMA to meaningful edges or features (canyons, allotment/pasture boundaries, roads etc.) was completed at the field level to facilitate use of the map designations at the field level. Specific changes can be viewed in MapEditsSummary_05232014_Final.docx, see metadata properties for the attachment

This spatial data set provides information pertaining to the known land use and disturbance history for lands within the March 2018 administrative boundary of (Park, state). Land use and disturbance history presented here are not a comprehensive record of all potential land uses and disturbances but rather a record of known and documented land uses and disturbances based on the best available information. Additional land use and disturbance information may exist but due to time and budget constraints may not have been discovered during the research and development of this data set. The information in this data set was gathered through a variety of sources including but not limited to communication with National Park Service staff, historical documents, land patent records, online information searches, aerial imagery, historical photographs, and spatial data repositories. Data are presented as polygon features, each with a unique area number, its total area (in acres) and the percent of the park the area covers. Polygons were delineated based on existing GIS layers in park records, or, when these were not available, they were digitized using ESRI Arc Map 10.5.1 in conjunction with USDA Natural Resource Conservation Service NAIP orthoimagery based on written descriptions of locations (e.g., Township and Range Survey System) or maps in information sources. History of each polygon is described for one or more of five land use or disturbance types: cultivation, structures, excavation, grazing, and other disturbance. Each land use or disturbance type has six attribute fields. The first field indicates if there is evidence of the land use or disturbance type in the polygon. "Yes" indicates there is evidence and a

Feature class of Montana State Boundary was created to be coincident with the Montana County Boundaries, GCDB, and Cadastral Parcel Boundaries. Where the boundary is coincident with public land survey section lines, they were copied from the BLM's Geographic Coordinate Database (GCDB). If boundary was not coincident with GCDB lines, they were digitized on screen from 1:24,000 scale Geological Survey Digital Raster Graphics (DRGs). The state boundary will change as the GCDB / Montana CadNSDI is adjusted by the BLM / Montana State Library and those data are incorporated with the Montana Spatial Data Infrastructure Administrative Boundaries & Cadastral datasets.

The Digital Geologic-GIS Map of Glacier National Park, Montana is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (glac_geology.gdb), a 2.) Open Geospatial Consortium (OGC) geopackage, and 3.) 2.2 KMZ/KML file for use in Google Earth, however, this format version of the map is limited in data layers presented and in access to GRI ancillary table information. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (glac_geology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). The OGC geopackage is supported with a QGIS project (.qgz) file. Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) this file (glac_geology.gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (glac_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (glac_geology_metadata_faq.pdf). Please read the glac_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. Google Earth software is available for free at: http://www.google.com/earth/index.html. QGIS software is available for free at: https://www.qgis.org/en/site/. Users are encouraged to only use the Google Earth data for basic visualization, and to use the GIS data for any type of data analysis or investigation. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: U.S. Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (glac_geology_metadata.txt or glac_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:100,000 and United States National Map Accuracy Standards features are within (horizontally) 50.8 meters or 166.7 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in Google Earth, ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

The Montana Public Lands data contains public administered lands that are recorded in the Montana Department of Revenue's tax appraisal database. Each public land polygon is attributed with the name of the public agency that owns it. The data are derived from the statewide Montana Cadastral Parcel layer.

Version 10.0 (Alaska, Hawaii and Puerto Rico added) of these data are part of a larger U.S. Geological Survey (USGS) project to develop an updated geospatial database of mines, mineral deposits, and mineral regions in the United States. Mine and prospect-related symbols, such as those used to represent prospect pits, mines, adits, dumps, tailings, etc., hereafter referred to as “mine” symbols or features, have been digitized from the 7.5-minute (1:24,000, 1:25,000-scale; and 1:10,000, 1:20,000 and 1:30,000-scale in Puerto Rico only) and the 15-minute (1:48,000 and 1:62,500-scale; 1:63,360-scale in Alaska only) archive of the USGS Historical Topographic Map Collection (HTMC), or acquired from available databases (California and Nevada, 1:24,000-scale only). Compilation of these features is the first phase in capturing accurate locations and general information about features related to mineral resource exploration and extraction across the U.S. The compilation of 725,690 point and polygon mine symbols from approximately 106,350 maps across 50 states, the Commonwealth of Puerto Rico (PR) and the District of Columbia (DC) has been completed: Alabama (AL), Alaska (AK), Arizona (AZ), Arkansas (AR), California (CA), Colorado (CO), Connecticut (CT), Delaware (DE), Florida (FL), Georgia (GA), Hawaii (HI), Idaho (ID), Illinois (IL), Indiana (IN), Iowa (IA), Kansas (KS), Kentucky (KY), Louisiana (LA), Maine (ME), Maryland (MD), Massachusetts (MA), Michigan (MI), Minnesota (MN), Mississippi (MS), Missouri (MO), Montana (MT), Nebraska (NE), Nevada (NV), New Hampshire (NH), New Jersey (NJ), New Mexico (NM), New York (NY), North Carolina (NC), North Dakota (ND), Ohio (OH), Oklahoma (OK), Oregon (OR), Pennsylvania (PA), Rhode Island (RI), South Carolina (SC), South Dakota (SD), Tennessee (TN), Texas (TX), Utah (UT), Vermont (VT), Virginia (VA), Washington (WA), West Virginia (WV), Wisconsin (WI), and Wyoming (WY). The process renders not only a more complete picture of exploration and mining in the U.S., but an approximate timeline of when these activities occurred. These data may be used for land use planning, assessing abandoned mine lands and mine-related environmental impacts, assessing the value of mineral resources from Federal, State and private lands, and mapping mineralized areas and systems for input into the land management process. These data are presented as three groups of layers based on the scale of the source maps. No reconciliation between the data groups was done.Datasets were developed by the U.S. Geological Survey Geology, Geophysics, and Geochemistry Science Center (GGGSC). Compilation work was completed by USGS National Association of Geoscience Teachers (NAGT) interns: Emma L. Boardman-Larson, Grayce M. Gibbs, William R. Gnesda, Montana E. Hauke, Jacob D. Melendez, Amanda L. Ringer, and Alex J. Schwarz; USGS student contractors: Margaret B. Hammond, Germán Schmeda, Patrick C. Scott, Tyler Reyes, Morgan Mullins, Thomas Carroll, Margaret Brantley, and Logan Barrett; and by USGS personnel Virgil S. Alfred, Damon Bickerstaff, E.G. Boyce, Madelyn E. Eysel, Stuart A. Giles, Autumn L. Helfrich, Alan A. Hurlbert, Cheryl L. Novakovich, Sophia J. Pinter, and Andrew F. Smith.USMIN project website: https://www.usgs.gov/USMIN

This map forms part of the Montana State Geological Map.

The Ennis 1:100,000 quadrangle lies within both the Laramide (Late Cretaceous to early Tertiary) foreland province of southwestern Montana and the northeastern margin of the middle to late Tertiary Basin and Range province.

The oldest rocks in the quadrangle are Archean high-grade gneiss, and granitic to ultramafic intrusive rocks that are as old as about 3.0 Ga. The gneiss includes a supracrustal assemblage of quartz-feldspar gneiss, amphibolite, quartzite, and biotite schist and gneiss. The basement rocks are overlain by a platform sequence of sedimentary rocks as old as Cambrian Flathead Quartzite and as young as Upper Cretaceous Livingston Group sandstones, shales, and volcanic rocks.

The Archean crystalline rocks crop out in the cores of large basement uplifts, most notably the "Madison-Gravelly arch" that includes parts of the present Tobacco Root Mountains and the Gravelly, Madison, and Gallatin Ranges. These basement uplifts or blocks were thrust westward during the Laramide orogeny over rocks as young as Upper Cretaceous. The thrusts are now exposed in the quadrangle along the western flanks of the Gravelly and Madison Ranges (the Greenhorn thrust and the Hilgard fault system, respectively). Simultaneous with the west-directed thrusting, northwest-striking, northeast-side-up reverse faults formed a parallel set across southwestern Montana; the largest of these is the Spanish Peaks fault, which cuts prominently across the Ennis quadrangle.

Beginning in late Eocene time, extensive volcanism of the Absorka Volcanic Supergroup covered large parts of the area; large remnants of the volcanic field remain in the eastern part of the quadrangle. The volcanism was concurrent with, and followed by, middle Tertiary extension. During this time, the axial zone of the "Madison-Gravelly arch," a large Laramide uplift, collapsed, forming the Madison Valley, structurally a complex down-to-the-east half graben. Basin deposits as thick as 4,500 m filled the graben.

Pleistocene glaciers sculpted the high peaks of the mountain ranges and formed the present rugged topography.

Compilation scale is 1:100,000. Geology mapped between 1988 and 1995. Compilation completed 1997. Review and revision completed 1997. Archive files prepared 1998-02.

This map of human habitation was developed, following a modification of Schumacher et al. (2000), by incorporating 2000 U.S Census Data and land ownership. The 2000 U.S. Census Block data and ownership map of the western United States were used to correct the population density for uninhabited public lands. All census blocks in the western United States were merged into one shapefile which was then clipped to contain only those areas found on private or indian reservation lands because human habitation on federal land is negligible. The area (ha) for each corrected polygon was calculated and the 2000 census block data table was joined to the shapefile. In a new field, population density (individuals/ha) corrected for public land in census blocks was calculated . SHAPEGRID in ARC/INFO was used to convert population density values to grid with 90m resolution.

These data are part of a larger USGS project to develop an updated geospatial database of mines, mineral deposits and mineral regions in the United States. Mine and prospect-related symbols, such as those used to represent prospect pits, mines, adits, dumps, tailings, etc., hereafter referred to as “mine†symbols or features, are currently being digitized on a state-by-state basis from the 7.5-minute (1:24, 000-scale) and the 15-minute (1:48, 000 and 1:62,500-scale) archive of the USGS Historical Topographic Maps Collection, or acquired from available databases (California and Nevada, 1:24,000-scale only). Compilation of these features is the first phase in capturing accurate locations and general information about features related to mineral resource exploration and extraction across the U.S. To date, the compilation of 400,000-plus point and polygon mine symbols from approximately 51,000 maps of 17 western states (AZ, CA, CO, ID, KS, MT, ND, NE, NM, NV, OK, OR, SD, UT, WA, WY and western TX) has been completed. The process renders not only a more complete picture of exploration and mining in the western U.S., but an approximate time line of when these activities occurred. The data may be used for land use planning, assessing abandoned mine lands and mine-related environmental impacts, assessing the value of mineral resources from Federal, State and private lands, and mapping mineralized areas and systems for input into the land management process. The data are presented as three groups of layers based on the scale of the source maps. No reconciliation between the data groups was done.

The Digital Geologic-GIS Maps of Bighorn Canyon National Recreation Area, Montana and Wyoming is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (bica_geology.gdb), a 2.) Open Geospatial Consortium (OGC) geopackage, and 3.) 2.2 KMZ/KML file for use in Google Earth, however, this format version of the map is limited in data layers presented and in access to GRI ancillary table information. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file (bica_geology.mapx) and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (bica_geology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). The OGC geopackage is supported with a QGIS project (.qgz) file. Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) a readme file (bica_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (bica_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (bica_geology_metadata_faq.pdf). Please read the bica_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. Google Earth software is available for free at: https://res1wwwd-o-tgoogled-o-tcom.vcapture.xyz/earth/versions/. QGIS software is available for free at: https://res1wwwd-o-tqgisd-o-torg.vcapture.xyz/en/site/. Users are encouraged to only use the Google Earth data for basic visualization, and to use the GIS data for any type of data analysis or investigation. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: https://res1wwwd-o-tnpsd-o-tgov.vcapture.xyz/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://res1wwwd-o-tnpsd-o-tgov.vcapture.xyz/subjects/geology/gri.htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: U.S. Geological Survey and Montana Bureau of Mines and Geology. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (bica_geology_metadata.txt or bica_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:250,000 and United States National Map Accuracy Standards features are within (horizontally) 127 meters or 416.7 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in Google Earth, ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://res1wwwd-o-tnpsd-o-tgov.vcapture.xyz/articles/gri-geodatabase-model.htm).

In 2015, agricultural irrigation withdrawals accounted for about 42 percent of the total freshwater withdrawals in the United States (Dieter and others, 2018). Consistent and accurate designations of irrigated agricultural lands, irrigation system type, conveyance systems, and water source (groundwater or surface water) are essential for the determination of irrigation water use and ultimately the sound management of our nation’s water resources. Several local, state, and federal agencies compile data (crops, irrigation, irrigation system type, etc.) that can be used to estimate irrigation withdrawals for agricultural. The format of these data varies from data tables, typically compiled at the county level, to spatial Geographic Information System (GIS) polygon layers of agricultural lands. These data sources are often incomplete, out of date, or inconsistently compiled. The USGS and the University of Wisconsin-Madison developed annual Landsat-based Irrigation Dataset (LANID), which consists of irrigation maps, derivative products, and manually collected ground reference data covering the conterminous US (CONUS) for the period of 1997–2017 (Xie and Lark, 2021a). These maps were developed using verified irrigated-lands GIS datasets (i.e. training data) coupled with remotely-sensed, 30-meter resolution Landsat-derived data. The current and future availability of verified field-level data is required to train and validate this and other models.

This map service shows a static map image designed for display at approximately 1:100,000 scale. The map includes public land ownership, selected federal and state managed areas, lakes, streams, roads, the Public Land Survey system, 50-foot contours, shaded relief, and selected buildings and structures. The map was produced by the Montana State Library with the latest data that was available in January 2016. The map legend for the service is available at https://ftpgeoinfo.msl.mt.gov/Documents/Metadata/Reference100k.tif. The service is in the Web Mercator coordinate system. This coordinate system distorts the scale of maps of Montana so that everything appears to be about 40 percent larger than it really is. Any use of this service for making measurements must be done with software that understands the scale distortion. This typically includes on-line mapping services but does NOT include desktop mapping applications such as ArcGIS Destktop. The map is also available as a statewide MrSID image in Montana State Plane Coordinates and as individual 60x30-minute quadrangle MrSID images.