Update information can be found within the layer’s attributes and in a table on the Utah Parcel Data webpage under LIR Parcels.In Spring of 2016, the Land Information Records work group, an informal committee organized by the Governor’s Office of Management and Budget’s State Planning Coordinator, produced recommendations for expanding the sharing of GIS-based parcel information. Participants in the LIR work group included representatives from county, regional, and state government, including the Utah Association of Counties (County Assessors and County Recorders), Wasatch Front Regional Council, Mountainland and Bear River AOGs, Utah League of Cities and Towns, UDOT, DNR, AGRC, the Division of Emergency Management, Blue Stakes, economic developers, and academic researchers. The LIR work group’s recommendations set the stage for voluntary sharing of additional objective/quantitative parcel GIS data, primarily around tax assessment-related information. Specifically the recommendations document establishes objectives, principles (including the role of local and state government), data content items, expected users, and a general process for data aggregation and publishing. An important realization made by the group was that ‘parcel data’ or ‘parcel record’ products have a different meaning to different users and data stewards. The LIR group focused, specifically, on defining a data sharing recommendation around a tax year parcel GIS data product, aligned with the finalization of the property tax roll by County Assessors on May 22nd of each year. The LIR recommendations do not impact the periodic sharing of basic parcel GIS data (boundary, ID, address) from the County Recorders to AGRC per 63F-1-506 (3.b.vi). Both the tax year parcel and the basic parcel GIS layers are designed for general purpose uses, and are not substitutes for researching and obtaining the most current, legal land records information on file in County records. This document, below, proposes a schedule, guidelines, and process for assembling county parcel and assessment data into an annual, statewide tax parcel GIS layer. gis.utah.gov/data/sgid-cadastre/It is hoped that this new expanded parcel GIS layer will be put to immediate use supporting the best possible outcomes in public safety, economic development, transportation, planning, and the provision of public services. Another aim of the work group was to improve the usability of the data, through development of content guidelines and consistent metadata documentation, and the efficiency with which the data sharing is distributed.GIS Layer Boundary Geometry:GIS Format Data Files: Ideally, Tax Year Parcel data should be provided in a shapefile (please include the .shp, .shx, .dbf, .prj, and .xml component files) or file geodatabase format. An empty shapefile and file geodatabase schema are available for download at:At the request of a county, AGRC will provide technical assistance to counties to extract, transform, and load parcel and assessment information into the GIS layer format.Geographic Coverage: Tax year parcel polygons should cover the area of each county for which assessment information is created and digital parcels are available. Full coverage may not be available yet for each county. The county may provide parcels that have been adjusted to remove gaps and overlaps for administrative tax purposes or parcels that retain these expected discrepancies that take their source from the legally described boundary or the process of digital conversion. The diversity of topological approaches will be noted in the metadata.One Tax Parcel Record Per Unique Tax Notice: Some counties produce an annual tax year parcel GIS layer with one parcel polygon per tax notice. In some cases, adjacent parcel polygons that compose a single taxed property must be merged into a single polygon. This is the goal for the statewide layer but may not be possible in all counties. AGRC will provide technical support to counties, where needed, to merge GIS parcel boundaries into the best format to match with the annual assessment information.Standard Coordinate System: Parcels will be loaded into Utah’s statewide coordinate system, Universal Transverse Mercator coordinates (NAD83, Zone 12 North). However, boundaries stored in other industry standard coordinate systems will be accepted if they are both defined within the data file(s) and documented in the metadata (see below).Descriptive Attributes:Database Field/Column Definitions: The table below indicates the field names and definitions for attributes requested for each Tax Parcel Polygon record.FIELD NAME FIELD TYPE LENGTH DESCRIPTION EXAMPLE SHAPE (expected) Geometry n/a The boundary of an individual parcel or merged parcels that corresponds with a single county tax notice ex. polygon boundary in UTM NAD83 Zone 12 N or other industry standard coordinates including state plane systemsCOUNTY_NAME Text 20 - County name including spaces ex. BOX ELDERCOUNTY_ID (expected) Text 2 - County ID Number ex. Beaver = 1, Box Elder = 2, Cache = 3,..., Weber = 29ASSESSOR_SRC (expected) Text 100 - Website URL, will be to County Assessor in most all cases ex. webercounty.org/assessorBOUNDARY_SRC (expected) Text 100 - Website URL, will be to County Recorder in most all cases ex. webercounty.org/recorderDISCLAIMER (added by State) Text 50 - Disclaimer URL ex. gis.utah.gov...CURRENT_ASOF (expected) Date - Parcels current as of date ex. 01/01/2016PARCEL_ID (expected) Text 50 - County designated Unique ID number for individual parcels ex. 15034520070000PARCEL_ADD (expected, where available) Text 100 - Parcel’s street address location. Usually the address at recordation ex. 810 S 900 E #304 (example for a condo)TAXEXEMPT_TYPE (expected) Text 100 - Primary category of granted tax exemption ex. None, Religious, Government, Agriculture, Conservation Easement, Other Open Space, OtherTAX_DISTRICT (expected, where applicable) Text 10 - The coding the county uses to identify a unique combination of property tax levying entities ex. 17ATOTAL_MKT_VALUE (expected) Decimal - Total market value of parcel's land, structures, and other improvements as determined by the Assessor for the most current tax year ex. 332000LAND _MKT_VALUE (expected) Decimal - The market value of the parcel's land as determined by the Assessor for the most current tax year ex. 80600PARCEL_ACRES (expected) Decimal - Parcel size in acres ex. 20.360PROP_CLASS (expected) Text 100 - Residential, Commercial, Industrial, Mixed, Agricultural, Vacant, Open Space, Other ex. ResidentialPRIMARY_RES (expected) Text 1 - Is the property a primary residence(s): Y'(es), 'N'(o), or 'U'(nknown) ex. YHOUSING_CNT (expected, where applicable) Text 10 - Number of housing units, can be single number or range like '5-10' ex. 1SUBDIV_NAME (optional) Text 100 - Subdivision name if applicable ex. Highland Manor SubdivisionBLDG_SQFT (expected, where applicable) Integer - Square footage of primary bldg(s) ex. 2816BLDG_SQFT_INFO (expected, where applicable) Text 100 - Note for how building square footage is counted by the County ex. Only finished above and below grade areas are counted.FLOORS_CNT (expected, where applicable) Decimal - Number of floors as reported in county records ex. 2FLOORS_INFO (expected, where applicable) Text 100 - Note for how floors are counted by the County ex. Only above grade floors are countedBUILT_YR (expected, where applicable) Short - Estimated year of initial construction of primary buildings ex. 1968EFFBUILT_YR (optional, where applicable) Short - The 'effective' year built' of primary buildings that factors in updates after construction ex. 1980CONST_MATERIAL (optional, where applicable) Text 100 - Construction Material Types, Values for this field are expected to vary greatly by county ex. Wood Frame, Brick, etc Contact: Sean Fernandez, Cadastral Manager (email: sfernandez@utah.gov; office phone: 801-209-9359)

Update information can be found within the layer’s attributes and in a table on the Utah Parcel Data webpage under Basic Parcels."Database containing parcel boundary, parcel identifier, parcel address, owner type, and county recorder contact information" - HB113. The intent of the bill was to not include any attributes that the counties rely on for data sales. If you want other attributes associated with the parcels you need to contact the county recorder.Users should be aware the owner type field 'OWN_TYPE' in the parcel polygons is a very generalized ownership type (Federal, Private, State, Tribal). It is populated with the value of the 'OWNER' field where the parcel's centroid intersects the CADASTRE.LandOwnership polygon layer.This dataset is a snapshot in time and may not be the most current. For the most current data contact the county recorder.

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the State Plane projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.

The Fort Morgan 7.5' quadrangle is located on the semiarid plains of northeastern Colorado, along the South Platte River corridor where the river has incised into Upper Cretaceous Pierre Shale. The Pierre Shale is largely covered by surficial deposits that formed from alluvial, eolian, and hillslope processes operating in concert with environmental changes from the late Pliocene to the present. The South Platte River, originating high in the Colorado Rocky Mountains, has played a major role in shaping surficial geology in the map area, which is several tens of kilometers downstream from where headwater tributaries join the river. Recurrent glaciation (and deglaciation) of basin headwaters has affected river discharge and sediment supply far downstream, influencing deposition of alluvium and river incision in the Fort Morgan quadrangle. Distribution and characteristics of the alluvial deposits indicate that during the Pleistocene the course of the river within the map area shifted ...

Download .zipThe C, D Law Coal Permit Maps county coverage sets were developed using the original mine maps for over 2500 coal mining and reclamation permits issued under Ohio law and finalized (i.e. operations completed) between 1975 and December 2002.

Ohio started issuing coal mining licenses in the 1940s. The earliest license and permit requirements were minimal and did not include submittal of a map or other delineation of the mined area. Significant changes to legal requirements are reflected by the alphabetical designation of each subsequent law revision, i.e., earlier A-law permits (circa 1966) through contemporary D-law permits. The ODNR-Division of Mineral Resources Management (DMRM) has attempted to create as complete a database as possible from available archive records, however, research has identified missing permit files. Thus, this GIS data is known to be incomplete due to the loss of archival records.

The C and D law permit maps were scanned at a density of 200 dots per inch (dpi). The scanned image was then heads-up digitized using Microstation computer aided design software (CAD) to create design files grouped by county location. Data captured within the design file includes permit boundary, affected boundary, test hole locations, and associated attributes. The design file was then "placed-to-ground" using ODNR Division of Geological Survey's "ODNR Land Sub-division Background Design Files" NAD83 State Plane coverages and DOQQ aerial images obtained through the Ohio Geographically Referenced Information Program (OGRIP)/Ohio Department of Administrative Services. The design file was then converted to ARC/INFO coverage and projected to State Plane Ohio Coordinates, NAD83:

Projected coordinate system name: NAD_1983_StatePlane_Ohio_South_FIPS_3402_Feet

Geographic coordinate system name: GCS_North_American_1983

A complete county coverage set consists of five data files for the permit area, affected area, and test hole locations. For example, the coverage for Athens County includes:

athens_c_permitted (Athens County, C-permit area polygons) athens_c_affected (Athens County, C-permit affected area polygons) athens_d_permitted (Athens County, D- permit area polygons) athens_d_affected (Athens County, D-permit affected area polygons) athens_testholes (Athens County, Test Hole points)

In addition to the ArcView shape files in the county data sets, the scanned TIF images for source documents are available at DMRM. The scanned mine map depicts information about the operations conducted, environmental resources, and extracted coal resources. If more detailed information is desired, the available archival record for each captured permit can be accessed at either the State Archives at the Ohio Historical Society or the ODNR-DMRM central office.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Mineral Resources ManagementAbandoned Mine Land Program2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

This map shows specific water-quality items and hydrologic data site information which come from QWDATA (Water Quality) and GWSI (Ground Water Information System). Both QWDATA and GWSI are subsystems of NWIS (National Water Inventory System)of the USGS (United States Geologic Survey).

This map is for Morgan County, Utah.

The scope and purpose of NWIS is defined on the web site: http://water.usgs.gov/public/pubs/FS/FS-027-98/

The Weldona 7.5' quadrangle is located on the semiarid plains of northeastern Colorado, along the South Platte River corridor where the river has incised into Upper Cretaceous Pierre Shale. The Pierre Shale is largely covered by surficial deposits that formed from alluvial, eolian, and hillslope processes operating in concert with environmental changes from the Pleistocene to the present. The South Platte River, originating high in the Colorado Rocky Mountains, has played a major role in shaping surficial geology in the map area, which is several tens of kilometers downstream from where headwater tributaries join the river. Recurrent glaciation (and deglaciation) of basin headwaters has affected river discharge and sediment supply far downstream, influencing deposition of alluvium and river incision in the Weldona quadrangle. During the Pleistocene the course of the river within the map area shifted progressively southward as it incised, and by late middle Pleistocene the river was south of its present position, cutting and filling deep paleochannels now covered by younger alluvium. The river shifted back to the north during the late Pleistocene. Kiowa and Bijou Creeks are unglaciated tributaries originating in the Colorado Piedmont east of the Front Range that also have played a major role in shaping surficial geology of the map area. Periodically during the late Pleistocene, major flood events on these tributaries deposited large volumes of sediment at their confluences, forming a broad, low-gradient fan of sidestream alluvium that could have occasionally dammed the river for short periods of time. Eolian sand deposits of the Sterling (north of river) and Fort Morgan (south of river) dune fields cover much of the quadrangle and record past episodes of sand mobilization during times of prolonged drought. With the onset of irrigation and damming during historical times, the South Platte River has changed from a broad, shallow, and sandy braided river with highly variable seasonal discharge to a much narrower, deeper river with braided-meandering transition morphology and more uniform discharge.

description: This map shows the USGS (United States Geologic Survey), NWIS (National Water Inventory System) Hydrologic Data Sites for Morgan County, Utah. The scope and purpose of NWIS is defined on the web site: http://water.usgs.gov/public/pubs/FS/FS-027-98/; abstract: This map shows the USGS (United States Geologic Survey), NWIS (National Water Inventory System) Hydrologic Data Sites for Morgan County, Utah. The scope and purpose of NWIS is defined on the web site: http://water.usgs.gov/public/pubs/FS/FS-027-98/

This data set consists of 0.5-foot pixel resolution, natural color orthoimages covering Morgan County, Georgia. An orthoimage is remotely sensed image data in which displacement of features in the image caused by terrain relief and sensor orientation have been mathematically removed. Orthoimagery combines the image characteristics of a photograph with the geometric qualities of a map. Each or...

This data set is a digital soil survey and generally is the most detailed level of soil geographic data developed by the National Cooperative Soil Survey. The information was prepared by digitizing maps, by compiling information onto a planimetric correct base and digitizing, or by revising digitized maps using remotely sensed and other information. This data set consists of georeferenced digital map data and computerized attribute data. The map data are in a soil survey area extent format and include a detailed, field verified inventory of soils and miscellaneous areas that normally occur in a repeatable pattern on the landscape and that can be cartographically shown at the scale mapped. A special soil features layer (point and line features) is optional. This layer displays the location of features too small to delineate at the mapping scale, but they are large enough and contrasting enough to significantly influence use and management. The soil map units are linked to attributes in the National Soil Information System relational database, which gives the proportionate extent of the component soils and their properties.

Link to the ScienceBase Item Summary page for the item described by this metadata record. Service Protocol: Link to the ScienceBase Item Summary page for the item described by this metadata record. Application Profile: Web Browser. Link Function: information

Land boundaries for taxing purposes in Morgan County Illinois. Updated on 5/1/2023

Link to the ScienceBase Item Summary page for the item described by this metadata record. Service Protocol: Link to the ScienceBase Item Summary page for the item described by this metadata record. Application Profile: Web Browser. Link Function: information

This map shows specific water-quality items and hydrologic data site information which come from QWDATA (Water Quality) and GWSI (Ground Water Information System). Both QWDATA and GWSI are subsystems of NWIS (National Water Inventory System)of the USGS (United States Geologic Survey). This map is for Morgan County, Utah. The scope and purpose of NWIS is defined on the web site: http://water.usgs.gov/public/pubs/FS/FS-027-98/

The USGS Colorado Water Science Center, in cooperation with the Colorado Water Conservation Board, collected hydraulic data for the South Platte River for areas adjacent to Fort Morgan, Colo., based on the USGS streamgage 06759500 South Platte River at Fort Morgan, CO. The hydraulic data include survey point data for 54 cross sections and 10 pressure transducers, which are used to record the river stage beginning at Morgan County Road 16 and extending downstream to Morgan County Road 20.5 near Fort Morgan, Colo. The cross-section and pressure transducer location data were collected using real-time kinematic Global Navigation Satellite Systems by USGS personnel from February 15, 2017, through April 18, 2017. These data can be used to develop inundation maps, which could be available to emergency personnel, public officials, and the general public using an online public mapping application at the USGS Flood Inundation Mapper website (http://water.usgs.gov/osw/flood_inundation/), which contains flood inundation map libraries from throughout the country created by the USGS.

Download .zipThe B Law Coal Permit Maps county coverage sets were developed using the original mine maps for coal mining and reclamation permits issued under Ohio law from 1973 through 1976. Approximately 1285 B-Permits were issued during this time period, however, only approximately 414 records could be located and captured at this time. The Division of Mineral Resources Management will continue to search for missing B permit archival records as resources allow; additional B permit data may be added to this existing coverage in the future.

Ohio started issuing coal mining licenses in the 1940s. The earliest license and permit requirements were minimal and sometimes did not include submittal of a map or other delineation of the mined area. Significant changes to legal requirements are reflected by the alphabetical designation of each subsequent law revision, i.e., earlier A-law permits (circa 1966) through contemporary D-law permits. The ODNR-Division of Mineral Resources Management (DMRM) has attempted to create as complete a database as possible from available archive records, however, research has identified missing permit files. Thus, this GIS data is known to be incomplete due to the loss of archival records.

The B law permit maps were scanned at a density of 200 dots per inch (dpi). The scanned image was then heads-up digitized using Microstation computer aided design software (CAD) to create design files grouped by county location. Data captured within the design file includes permit boundary, affected boundary, test hole locations, and associated attributes. The design file was then "placed-to-ground" using ODNR Division of Geological Survey's "ODNR Land Subdivision Background Design Files" NAD83 State Plane coverages and DOQQ aerial images obtained through the Ohio Geographically Referenced Information Program (OGRIP)/Ohio Department of Administrative Services. The design file was then converted to ARC/INFO coverage and projected to State Plane Ohio Coordinates, NAD83:

Projected coordinate system name: NAD_1983_StatePlane_Ohio_South_FIPS_3402_Feet

Geographic coordinate system name: GCS_North_American_1983

A complete county coverage set consists of three data files for the permit area, affected area, and test hole locations. For example, the coverage for Belmont County includes:

belmont_b_permitted (Belmont County, B-permit area polygons) belmont_b _affected (Belmont County, B-permit affected area polygons) belmont_testholes_b (Belmont County, Test Hole points)

In addition to the ArcView shape files in the county data sets, the scanned TIF images for source documents are available at DMRM. The scanned mine map depicts information about the operations conducted, environmental resources, and extracted coal resources. If more detailed information is desired, the available archival record for each captured permit can be accessed at either the State Archives at the Ohio Historical Society or the ODNR-DMRM central office.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Mineral Resources ManagementAbandoned Mine Land Program2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Fayl Faylın tarixçəsi Faylın istifadəsi Faylın qlobal istifadəsi MetaməlumatlarBu SVG faylın PNG formatındakı bu görünüş

The USGS Colorado Water Science Center, in cooperation with the Colorado Water Conservation Board, collected hydraulic data for the South Platte River for areas adjacent to Fort Morgan, Colo., based on the USGS streamgage 06759500 South Platte River at Fort Morgan, CO. The hydraulic data include survey point data for 54 cross sections and 10 pressure transducers, which are used to record the river stage beginning at Morgan County Road 16 and extending downstream to Morgan County Road 20.5 near Fort Morgan, Colo. The cross-section and pressure transducer location data were collected using real-time kinematic Global Navigation Satellite Systems by USGS personnel from February 15, 2017, through April 18, 2017. These data can be used to develop inundation maps, which could be available to emergency personnel, public officials, and the general public using an online public mapping application at the USGS Flood Inundation Mapper website (http://water.usgs.gov/osw/flood_inundation/), which contains flood inundation map libraries from throughout the country created by the USGS.

Download .zipThe flood hazard areas coverage is a representation of the 100 year floodplain as contained in the Federal Emergency Management Agency's (FEMA) most recent NFIP maps at the time of digitizing (2000). These maps were transferred to USGS 7.5 minute quadrangle maps and digitized in a vector mode.

Original coverage data was converted from the .e00 file to a more standard ESRI shapefile(s) in November 2014.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesReal Estate & Land ManagementReal Estate and Lands Management2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

A map of municipal emergency services zones/ESZs created for use by the County of Berks Department of Emergency Services and other County emergency response agencies.