This statistics shows a ranking of the metropolitan areas in the United States in 2013 with the highest population density. As of 2013, Los Angeles-Long Beach-Anaheim in California was ranked first with a population density of 1,046 inhabitants per square kilometer.

Of the most populous cities in the U.S., San Jose, California had the highest annual income requirement at ******* U.S. dollars annually for homeowners to have an affordable and comfortable life in 2024. This can be compared to Houston, Texas, where homeowners needed an annual income of ****** U.S. dollars in 2024.

This map shows population density of the United States. Areas in darker magenta have much higher population per square mile than areas in orange or yellow. Data is from the U.S. Census Bureau’s 2020 Census Demographic and Housing Characteristics. The map's layers contain total population counts by sex, age, and race groups for Nation, State, County, Census Tract, and Block Group in the United States and Puerto Rico. From the Census:"Population density allows for broad comparison of settlement intensity across geographic areas. In the U.S., population density is typically expressed as the number of people per square mile of land area. The U.S. value is calculated by dividing the total U.S. population (316 million in 2013) by the total U.S. land area (3.5 million square miles).When comparing population density values for different geographic areas, then, it is helpful to keep in mind that the values are most useful for small areas, such as neighborhoods. For larger areas (especially at the state or country scale), overall population density values are less likely to provide a meaningful measure of the density levels at which people actually live, but can be useful for comparing settlement intensity across geographies of similar scale." SourceAbout the dataYou can use this map as is and you can also modify it to use other attributes included in its layers. This map's layers contain total population counts by sex, age, and race groups data from the 2020 Census Demographic and Housing Characteristics. This is shown by Nation, State, County, Census Tract, Block Group boundaries. Each geography layer contains a common set of Census counts based on available attributes from the U.S. Census Bureau. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.Vintage of boundaries and attributes: 2020 Demographic and Housing Characteristics Table(s): P1, H1, H3, P2, P3, P5, P12, P13, P17, PCT12 (Not all lines of these DHC tables are available in this feature layer.)Data downloaded from: U.S. Census Bureau’s data.census.gov siteDate the Data was Downloaded: May 25, 2023Geography Levels included: Nation, State, County, Census Tract, Block GroupNational Figures: included in Nation layer The United States Census Bureau Demographic and Housing Characteristics: 2020 Census Results 2020 Census Data Quality Geography & 2020 Census Technical Documentation Data Table Guide: includes the final list of tables, lowest level of geography by table and table shells for the Demographic Profile and Demographic and Housing Characteristics.News & Updates This map is ready to be used in ArcGIS Pro, ArcGIS Online and its configurable apps, Story Maps, dashboards, Notebooks, Python, custom apps, and mobile apps. Data can also be exported for offline workflows. Please cite the U.S. Census Bureau when using this data. Data Processing Notes: These 2020 Census boundaries come from the US Census TIGER geodatabases. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For Census tracts and block groups, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract and block group boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2020 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are unchanged and available as attributes within the data table (units are square meters).  The layer contains all US states, Washington D.C., and Puerto Rico. Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Block groups that fall within the same criteria (Block Group denoted as 0 with no area land) have also been removed.Percentages and derived counts, are calculated values (that can be identified by the "_calc_" stub in the field name). Field alias names were created based on the Table Shells file available from the Data Table Guide for the Demographic Profile and Demographic and Housing Characteristics. Not all lines of all tables listed above are included in this layer. Duplicative counts were dropped. For example, P0030001 was dropped, as it is duplicative of P0010001.To protect the privacy and confidentiality of respondents, their data has been protected using differential privacy techniques by the U.S. Census Bureau.

This dataset contains information about the demographics of all US cities and census-designated places with a population greater or equal to 65,000. This data comes from the US Census Bureau's 2015 American Community Survey. This product uses the Census Bureau Data API but is not endorsed or certified by the Census Bureau.

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. After each decennial census, the Census Bureau delineates urban areas that represent densely developed territory, encompassing residential, commercial, and other nonresidential urban land uses. In general, this territory consists of areas of high population density and urban land use resulting in a representation of the "urban footprint." There are two types of urban areas: urbanized areas (UAs) that contain 50,000 or more people and urban clusters (UCs) that contain at least 2,500 people, but fewer than 50,000 people (except in the U.S. Virgin Islands and Guam which each contain urban clusters with populations greater than 50,000). Each urban area is identified by a 5-character numeric census code that may contain leading zeroes.

About this dataset

Context

This list ranks the 1546 cities in the New York by Hispanic Asian population, as estimated by the United States Census Bureau. It also highlights population changes in each cities over the past five years.

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 5-Year Estimates, including:

• 2019-2023 American Community Survey 5-Year Estimates
• 2018-2022 American Community Survey 5-Year Estimates
• 2017-2021 American Community Survey 5-Year Estimates
• 2016-2020 American Community Survey 5-Year Estimates
• 2015-2019 American Community Survey 5-Year Estimates

Variables / Data Columns

• Rank by Hispanic Asian Population: This column displays the rank of cities in the New York by their Hispanic Asian population, using the most recent ACS data available.
• cities: The cities for which the rank is shown in the previous column.
• Hispanic Asian Population: The Hispanic Asian population of the cities is shown in this column.
• % of Total cities Population: This shows what percentage of the total cities population identifies as Hispanic Asian. Please note that the sum of all percentages may not equal one due to rounding of values.
• % of Total New York Hispanic Asian Population: This tells us how much of the entire New York Hispanic Asian population lives in that cities. Please note that the sum of all percentages may not equal one due to rounding of values.
• 5 Year Rank Trend: TThis column displays the rank trend across the last 5 years.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

All cities with a population > 1000 or seats of adm div (ca 80.000)Sources and ContributionsSources : GeoNames is aggregating over hundred different data sources. Ambassadors : GeoNames Ambassadors help in many countries. Wiki : A wiki allows to view the data and quickly fix error and add missing places. Donations and Sponsoring : Costs for running GeoNames are covered by donations and sponsoring.Enrichment:add country name

U.S. Census Populated Place Areas represents the 2020 U.S. Census populated place areas of the United States that include incorporated places, cities, and census designated places identified by the U.S. Census Bureau.This layer is updated annually. The geography is sourced from U.S. Census Bureau 2020 TIGER FGDB (National Sub-State) and edited using TIGER Hydrography to add a detailed coastline for cartographic purposes. Attribute fields include 2020 total population from the U.S. Census Public Law 94 data. The Population Class field values represent population ranges as follows:Population from 0 - 249Population from 250 - 499Population from 500 - 999Population from 1,000 - 2,499Population from 2,500 - 9,999Population from 10,000 - 49,999Population from 50,000 - 99,999Population from 100,000 - 249,999Population from 250,000 - 499,999Population 500,000 and overThis ready-to-use layer can be used in ArcGIS Pro and in ArcGIS Online and its configurable apps, dashboards, StoryMaps, custom apps, and mobile apps. The data can also be exported for offline workflows. Cite the 'U.S. Census Bureau' when using this data.

New York City Population By Community Districts

The data was collected from Census Bureaus' Decennial data dissemination (SF1) for the years 1970, 1980, 1990, 2000 and 2010.

Compiled by the Population Division – New York City Department of City Planning

A dataset listing Mississippi cities by population for 2024.

This web map indicates the annual compound rate of total population change in the United States from 2000 to 2010. Total Population is the total number of residents in an area. Residence refers to the "usual place" where a person lives. Total Population for 2000 is from the U.S. Census 2000. The 2010 Total Population variable is estimated by Esri's proven annual demographic update methodology that blends GIS with statistical technology and a unique combination of data sources.The map is symbolized so that you can easily distinguish areas of population growth (i.e. shades of green) from areas of population decline (i.e. shades of red). It uses a 3 D effect to further emphasize those trends. The map reveals interesting patterns of recent population change in various regions and communities across the United States.The map shows population change at the County and Census Tract levels. The geography depicts Counties at 25m to 750k scale, Census Tracts at 750k to 100k scale.Esri's Updated Demographics (2010/2015) – Population, age, income, sex, race, marital status and other variables are among the variables included in the database. Each year, Esri's data development team employs its proven methodologies to update more than 2,000 demographic variables for a variety of geographies. See Updated Demographics for more information.

About this dataset

Context

This list ranks the 5 cities in the Aleutians West Census Area, AK by White population, as estimated by the United States Census Bureau. It also highlights population changes in each cities over the past five years.

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 5-Year Estimates, including:

• 2019-2023 American Community Survey 5-Year Estimates
• 2018-2022 American Community Survey 5-Year Estimates
• 2017-2021 American Community Survey 5-Year Estimates
• 2016-2020 American Community Survey 5-Year Estimates
• 2015-2019 American Community Survey 5-Year Estimates

Variables / Data Columns

• Rank by White Population: This column displays the rank of cities in the Aleutians West Census Area, AK by their White population, using the most recent ACS data available.
• cities: The cities for which the rank is shown in the previous column.
• White Population: The White population of the cities is shown in this column.
• % of Total cities Population: This shows what percentage of the total cities population identifies as White. Please note that the sum of all percentages may not equal one due to rounding of values.
• % of Total Aleutians West Census Area White Population: This tells us how much of the entire Aleutians West Census Area, AK White population lives in that cities. Please note that the sum of all percentages may not equal one due to rounding of values.
• 5 Year Rank Trend: TThis column displays the rank trend across the last 5 years.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

In 2020, about 82.66 percent of the total population in the United States lived in cities and urban areas. As the United States was one of the earliest nations to industrialize, it has had a comparatively high rate of urbanization over the past two centuries. The urban population became larger than the rural population during the 1910s, and by the middle of the century it is expected that almost 90 percent of the population will live in an urban setting. Regional development of urbanization in the U.S. The United States began to urbanize on a larger scale in the 1830s, as technological advancements reduced the labor demand in agriculture, and as European migration began to rise. One major difference between early urbanization in the U.S. and other industrializing economies, such as the UK or Germany, was population distribution. Throughout the 1800s, the Northeastern U.S. became the most industrious and urban region of the country, as this was the main point of arrival for migrants. Disparities in industrialization and urbanization was a key contributor to the Union's victory in the Civil War, not only due to population sizes, but also through production capabilities and transport infrastructure. The Northeast's population reached an urban majority in the 1870s, whereas this did not occur in the South until the 1950s. As more people moved westward in the late 1800s, not only did their population growth increase, but the share of the urban population also rose, with an urban majority established in both the West and Midwest regions in the 1910s. The West would eventually become the most urbanized region in the 1960s, and over 90 percent of the West's population is urbanized today. Urbanization today New York City is the most populous city in the United States, with a population of 8.3 million, while California has the largest urban population of any state. California also has the highest urbanization rate, although the District of Columbia is considered 100 percent urban. Only four U.S. states still have a rural majority, these are Maine, Mississippi, Montana, and West Virginia.

United States US: Population in Urban Agglomerations of More Than 1 Million data was reported at 149,493,144.000 Person in 2017. This records an increase from the previous number of 147,686,617.000 Person for 2016. United States US: Population in Urban Agglomerations of More Than 1 Million data is updated yearly, averaging 103,208,971.000 Person from Dec 1960 (Median) to 2017, with 58 observations. The data reached an all-time high of 149,493,144.000 Person in 2017 and a record low of 69,978,587.000 Person in 1960. United States US: Population in Urban Agglomerations of More Than 1 Million data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s United States – Table US.World Bank.WDI: Population and Urbanization Statistics. Population in urban agglomerations of more than one million is the country's population living in metropolitan areas that in 2018 had a population of more than one million people.; ; United Nations, World Urbanization Prospects.; ;

Many of the U.S.’s most populated areas are within miles of the coast. As the sea level rises in many areas, these cities are being exposed to more and more nuisance floods - not just from extreme events like Hurricane Sandy, but also when routine rain storms occur. This map plots data from NOAA showing the results of an analysis of tide gauge and satellite data from around the country. City locations colored in blue-green are experiencing positive sea level rise, whereas areas colored in light brown are experiencing negative sea level rise. This feature service includes pop-ups that indicate the city, the rate of sea level rise (feet per century) and the statistical 95% confidence level. The latter gives an indication of how much more or less rise can be expected from the average. Original data from NOAA: https://tidesandcurrents.noaa.gov/sltrends/

A dataset listing Montana cities by population for 2024.

VITAL SIGNS INDICATOR Population (LU1)

FULL MEASURE NAME
Population estimates

LAST UPDATED
February 2023

DESCRIPTION
Population is a measurement of the number of residents that live in a given geographical area, be it a neighborhood, city, county or region.

DATA SOURCE
California Department of Finance: Population and Housing Estimates - http://www.dof.ca.gov/Forecasting/Demographics/Estimates/
Table E-6: County Population Estimates (1960-1970)
Table E-4: Population Estimates for Counties and State (1970-2021)
Table E-8: Historical Population and Housing Estimates (1990-2010)
Table E-5: Population and Housing Estimates (2010-2021)

Bay Area Jurisdiction Centroids (2020) - https://data.bayareametro.gov/Boundaries/Bay-Area-Jurisdiction-Centroids-2020-/56ar-t6bs
Computed using 2020 US Census TIGER boundaries

U.S. Census Bureau: Decennial Census Population Estimates - http://www.s4.brown.edu/us2010/index.htm- via Longitudinal Tract Database Spatial Structures in the Social Sciences, Brown University
1970-2020

U.S. Census Bureau: American Community Survey (5-year rolling average; tract) - https://data.census.gov/
2011-2021
Form B01003

Priority Development Areas (Plan Bay Area 2050) - https://opendata.mtc.ca.gov/datasets/MTC::priority-development-areas-plan-bay-area-2050/about

CONTACT INFORMATION
vitalsigns.info@bayareametro.gov

METHODOLOGY NOTES (across all datasets for this indicator)
All historical data reported for Census geographies (metropolitan areas, county, city and tract) use current legal boundaries and names. A Priority Development Area (PDA) is a locally-designated area with frequent transit service, where a jurisdiction has decided to concentrate most of its housing and jobs growth for development in the foreseeable future. PDA boundaries are current as of December 2022.

Population estimates for Bay Area counties and cities are from the California Department of Finance, which are as of January 1st of each year. Population estimates for non-Bay Area regions are from the U.S. Census Bureau. Decennial Census years reflect population as of April 1st of each year whereas population estimates for intercensal estimates are as of July 1st of each year. Population estimates for Bay Area tracts are from the decennial Census (1970-2020) and the American Community Survey (2011-2021 5-year rolling average). Estimates of population density for tracts use gross acres as the denominator.

Population estimates for Bay Area tracts and PDAs are from the decennial Census (1970-2020) and the American Community Survey (2011-2021 5-year rolling average). Population estimates for PDAs are allocated from tract-level Census population counts using an area ratio. For example, if a quarter of a Census tract lies with in a PDA, a quarter of its population will be allocated to that PDA. Estimates of population density for PDAs use gross acres as the denominator. Note that the population densities between PDAs reported in previous iterations of Vital Signs are mostly not comparable due to minor differences and an updated set of PDAs (previous iterations reported Plan Bay Area 2040 PDAs, whereas current iterations report Plan Bay Area 2050 PDAs).

The following is a list of cities and towns by geographical area:

Big Three: San Jose, San Francisco, Oakland

Bayside: Alameda, Albany, Atherton, Belmont, Belvedere, Berkeley, Brisbane, Burlingame, Campbell, Colma, Corte Madera, Cupertino, Daly City, East Palo Alto, El Cerrito, Emeryville, Fairfax, Foster City, Fremont, Hayward, Hercules, Hillsborough, Larkspur, Los Altos, Los Altos Hills, Los Gatos, Menlo Park, Mill Valley, Millbrae, Milpitas, Monte Sereno, Mountain View, Newark, Pacifica, Palo Alto, Piedmont, Pinole, Portola Valley, Redwood City, Richmond, Ross, San Anselmo, San Bruno, San Carlos, San Leandro, San Mateo, San Pablo, San Rafael, Santa Clara, Saratoga, Sausalito, South San Francisco, Sunnyvale, Tiburon, Union City, Vallejo, Woodside

Inland, Delta and Coastal: American Canyon, Antioch, Benicia, Brentwood, Calistoga, Clayton, Cloverdale, Concord, Cotati, Danville, Dixon, Dublin, Fairfield, Gilroy, Half Moon Bay, Healdsburg, Lafayette, Livermore, Martinez, Moraga, Morgan Hill, Napa, Novato, Oakley, Orinda, Petaluma, Pittsburg, Pleasant Hill, Pleasanton, Rio Vista, Rohnert Park, San Ramon, Santa Rosa, Sebastopol, Sonoma, St. Helena, Suisun City, Vacaville, Walnut Creek, Windsor, Yountville

Unincorporated: all unincorporated towns

This graph shows the population density of the United States of America from 1790 to 2019. In 2019, the population density was approximately 92.9 residents per square mile of land area. Population density in the United States Population density has been tracked for over two hundred years in the United States. Over the last two centuries, the number of people living in the United States per square mile has grown from 4.5 in 1790 to 87.4 in 2010. After examining the data in detail, it becomes clear that a major population increase started around 1870. Population density was roughly 11 at the time and has doubled in the last century. Since then, population density grew by about 16 percent each decade. Population density doubled in 1900, and grew in total by around 800 percent until 2010.

The population density of the United States varies from state to state. The most densely populated state is New Jersey, with 1,208 people per square mile living there. Rhode Island is the second most densely populated state, with slightly over 1,000 inhabitants per square mile. A number of New England states follow at the top of the ranking, making the northeastern region of the United States the most densely populated region of the country.

The least populated U.S. state is the vast territory of Alaska. Only 1.3 inhabitants per square mile reside in the largest state of the U.S.

Compared to other countries around the world, the United States does not rank within the top 50, in terms of population density. Most of the leading countries and territories are city states. However, the U.S. is one of the most populous countries in the world, with a total population of over 327 million inhabitants, as of 2018.

About this dataset

Context

This list ranks the 126 cities in the Montana by Non-Hispanic White population, as estimated by the United States Census Bureau. It also highlights population changes in each cities over the past five years.

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 5-Year Estimates, including:

• 2019-2023 American Community Survey 5-Year Estimates
• 2018-2022 American Community Survey 5-Year Estimates
• 2017-2021 American Community Survey 5-Year Estimates
• 2016-2020 American Community Survey 5-Year Estimates
• 2015-2019 American Community Survey 5-Year Estimates

Variables / Data Columns

• Rank by Non-Hispanic White Population: This column displays the rank of cities in the Montana by their Non-Hispanic White population, using the most recent ACS data available.
• cities: The cities for which the rank is shown in the previous column.
• Non-Hispanic White Population: The Non-Hispanic White population of the cities is shown in this column.
• % of Total cities Population: This shows what percentage of the total cities population identifies as Non-Hispanic White. Please note that the sum of all percentages may not equal one due to rounding of values.
• % of Total Montana Non-Hispanic White Population: This tells us how much of the entire Montana Non-Hispanic White population lives in that cities. Please note that the sum of all percentages may not equal one due to rounding of values.
• 5 Year Rank Trend: TThis column displays the rank trend across the last 5 years.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

About this dataset

Context

This list ranks the 281 cities in the Washington by Hispanic White population, as estimated by the United States Census Bureau. It also highlights population changes in each cities over the past five years.

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 5-Year Estimates, including:

• 2019-2023 American Community Survey 5-Year Estimates
• 2018-2022 American Community Survey 5-Year Estimates
• 2017-2021 American Community Survey 5-Year Estimates
• 2016-2020 American Community Survey 5-Year Estimates
• 2015-2019 American Community Survey 5-Year Estimates

Variables / Data Columns

• Rank by Hispanic White Population: This column displays the rank of cities in the Washington by their Hispanic White population, using the most recent ACS data available.
• cities: The cities for which the rank is shown in the previous column.
• Hispanic White Population: The Hispanic White population of the cities is shown in this column.
• % of Total cities Population: This shows what percentage of the total cities population identifies as Hispanic White. Please note that the sum of all percentages may not equal one due to rounding of values.
• % of Total Washington Hispanic White Population: This tells us how much of the entire Washington Hispanic White population lives in that cities. Please note that the sum of all percentages may not equal one due to rounding of values.
• 5 Year Rank Trend: TThis column displays the rank trend across the last 5 years.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.