This data set includes cities in the United States, Puerto Rico and the U.S. Virgin Islands. These cities were collected from the 1970 National Atlas of the United States. Where applicable, U.S. Census Bureau codes for named populated places were associated with each name to allow additional information to be attached. The Geographic Names Information System (GNIS) was also used as a source for additional information. This is a revised version of the December, 2003, data set.

This layer is sourced from maps.bts.dot.gov.

In 2025, approximately 23 million people lived in the São Paulo metropolitan area, making it the biggest in Latin America and the Caribbean and the sixth most populated in the world. The homonymous state of São Paulo was also the most populous federal entity in the country. The second place for the region was Mexico City with 22.75 million inhabitants. Brazil's cities Brazil is home to two large metropolises, only counting the population within the city limits, São Paulo had approximately 11.45 million inhabitants, and Rio de Janeiro around 6.21 million inhabitants. It also contains a number of smaller, but well known cities such as Brasília, Salvador, Belo Horizonte and many others, which report between 2 and 3 million inhabitants each. As a result, the country's population is primarily urban, with nearly 88 percent of inhabitants living in cities. Mexico City Mexico City's metropolitan area ranks sevenths in the ranking of most populated cities in the world. Founded over the Aztec city of Tenochtitlan in 1521 after the Spanish conquest as the capital of the Viceroyalty of New Spain, the city still stands as one of the most important in Latin America. Nevertheless, the preeminent economic, political, and cultural position of Mexico City has not prevented the metropolis from suffering the problems affecting the rest of the country, namely, inequality and violence. Only in 2023, the city registered a crime incidence of 52,723 reported cases for every 100,000 inhabitants and around 24 percent of the population lived under the poverty line.

The "Major Cities" layer is derived from the "World Cities" dataset provided by ArcGIS Data and Maps group as part of the global data layers made available for public use.

"Major cities" layer specifically contains National and Provincial capitals that have the highest population within their respective country. Cities were filtered based on the STATUS (“National capital”, “National and provincial capital”, “Provincial capital”, “National capital and provincial capital enclave”, and “Other”). Majority of these cities within larger countries have been filtered at the highest levels of POP_CLASS (“5,000,000 and greater” and “1,000,000 to 4,999,999”). However, China for example, was filtered with cities over 11 million people due to many highly populated cities. Population approximations are sourced from US Census and UN Data.

Disclaimer: The designations employed and the presentation of material at this site do not imply the expression of any opinion whatsoever on the part of the Secretariat of the United Nations concerning the legal status of any country, territory, city or area or of its authorities, or concerning the delimitation of its frontiers or boundaries.

Data publication: 2021-03-12

Citation:

Credits: ESRI, CIA World Factbook, GMI, NIMA, UN Data, UN Habitat, US Census Bureau

Contact points:

Resource Contact: ESRI - ArcGIS Data and Maps

Metadata Contact: Justeen De Ocampo

Resource constraints:

Creative Commons Attribution-NonCommercial-ShareAlike 3.0 IGO (CC BY-NC- SA 3.0 IGO)

Online resources:

World Cities layer from ArcGIS Data & Maps

ArcGIS Data and Maps group background and available datasets.

This city boundary shapefile was extracted from Esri Data and Maps for ArcGIS 2014 - U.S. Populated Place Areas. This shapefile can be joined to 500 Cities city-level Data (GIS Friendly Format) in a geographic information system (GIS) to make city-level maps.

This multi-scale map shows counts of the total population the US. Data is from U.S. Census Bureau's 2020 PL 94-171 data for county, tract, block group, and block.County and metro area highlights:The largest county in the United States in 2020 remains Los Angeles County with over 10 million people.The largest city (incorporated place) in the United States in 2020 remains New York with 8.8 million people.312 of the 384 U.S. metro areas gained population between 2010 and 2020.The fastest-growing U.S. metro area between the 2010 Census and 2020 Census was The Villages, FL, which grew 39% from about 93,000 people to about 130,000 people.72 U.S. metro areas lost population from the 2010 Census to the 2020 Census. The U.S. metro areas with the largest percentage declines were Pine Bluff, AR, and Danville, IL, at -12.5 percent and -9.1 percent, respectively.View more 2020 Census statistics highlights on local populations changes.

This data set includes cities in the United States, Puerto Rico and the U.S. Virgin Islands. These cities were collected from the 1970 National Atlas of the United States. Where applicable, U.S. Census Bureau codes for named populated places were associated with each name to allow additional information to be attached. The Geographic Names Information System (GNIS) was also used as a source for additional information. This is a revised version of the December, 2003, data set.

This layer is sourced from maps.bts.dot.gov.

This map is designed to work in the new ArcGIS Online Map Viewer. Open in Map Viewer to view map. What does this map show?This map shows the population in the US by race. The map shows this pattern nationwide for states, counties, and tracts. Open the map in the new ArcGIS Online Map Viewer Beta to see the dot density pattern. What is dot density?The density is visualized by randomly placing one dot per a given value for the desired attribute. Unlike choropleth visualizations, dot density can be mapped using total counts since the size of the polygon plays a significant role in the perceived density of the attribute.Where is the data from?The data in this map comes from the most current American Community Survey (ACS) from the U.S. Census Bureau. Table B03002. The layer being used if updated with the most current data each year when the Census releases new estimates. The layer can be found in ArcGIS Living Atlas of the World: ACS Race and Hispanic Origin Variables - Boundaries.What questions does this map answer?Where do people of different races live?Do people of a similar race live close to people of their own race?Which cities have a diverse range of different races? Less diverse?

In 2023, Washington, D.C. had the highest population density in the United States, with 11,130.69 people per square mile. As a whole, there were about 94.83 residents per square mile in the U.S., and Alaska was the state with the lowest population density, with 1.29 residents per square mile. The problem of population density Simply put, population density is the population of a country divided by the area of the country. While this can be an interesting measure of how many people live in a country and how large the country is, it does not account for the degree of urbanization, or the share of people who live in urban centers. For example, Russia is the largest country in the world and has a comparatively low population, so its population density is very low. However, much of the country is uninhabited, so cities in Russia are much more densely populated than the rest of the country. Urbanization in the United States While the United States is not very densely populated compared to other countries, its population density has increased significantly over the past few decades. The degree of urbanization has also increased, and well over half of the population lives in urban centers.

Final approved map by the 2020 California Citizens Redistricting Commission for California's United States Congressional Districts; the authoritative and official delineations of California's United States Congressional Districts drawn during the 2020 redistricting cycle. The Citizens Redistricting Commission for the State of California has created statewide district maps for the State Assembly, State Senate, State Board of Equalization, and United States Congress in accordance, with the provisions of Article XXI of the California Constitution. The Commission has approved the final maps and certified them to the Secretary of State.Line drawing criteria included population equality as required by the U.S. Constitution, the Federal Voting Rights Act, geographic contiguity, geographic integrity, geographic compactness, and nesting. Geography was defined by U.S. Census Block geometry.Each of the 52 Congressional districts apportioned to California have an ideal population of 760,066, and the Commission adhered to federal constitutional mandates by requiring a district population deviation of no more than +/- one person. These districts also posed some of the Commission’s biggest challenges, and, because of strict population equality requirements, resulted in many more splits of counties, cities, neighborhoods, and communities of interest compared to State Assembly or Senate plans.

A dataset listing Georgia cities by population for 2024.

A dataset listing Mississippi cities by population for 2024.

A dataset listing Florida cities by population for 2024.

A dataset listing Maine cities by population for 2024.

A dataset listing Illinois cities by population for 2024.

A dataset listing Oklahoma cities by population for 2024.

The data is from:

https://simplemaps.com/data/world-cities

We're proud to offer a simple, accurate and up-to-date database of the world's cities and towns. We've built it from the ground up using authoritative sources such as the NGIA, US Geological Survey, US Census Bureau, and NASA.

Our database is:

• Up-to-date: It was last refreshed on May 11, 2025.
• Comprehensive: Over 4 million unique cities and towns from every country in the world (about 48 thousand in basic database).
• Accurate: Cleaned and aggregated from official sources. Includes latitude and longitude coordinates.
• Simple: A single CSV file, concise field names, only one entry per city.

City of Seattle neighborhood boundaries with American Community Survey (ACS) 5-year series data of frequently requested topics. Data is pulled from block group tables for the most recent ACS vintage and summarized to the neighborhoods based on block group assignment. Seattle neighborhood geography of Council Districts, Comprehensive Plan Growth Areas are included.The census block groups have been assigned to a neighborhood based on the distribution of the total population from the 2020 decennial census for the component census blocks. If the majority of the population in the block group were inside the boundaries of the neighborhood, the block group was assigned wholly to that neighborhood.Feature layer created for and used in the Neighborhood Profiles application.The attribute data associated with this map is updated annually to contain the most currently released American Community Survey (ACS) 5-year data and contains estimates and margins of error. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top right. <div style='font-family:"Avenir Next W01", "Avenir Next W00", "Avenir Next&qu

A dataset listing New York cities by population for 2024.

The Bureau of the Census has released Census 2000 Summary File 1 (SF1) 100-Percent data. The file includes the following population items: sex, age, race, Hispanic or Latino origin, household relationship, and household and family characteristics. Housing items include occupancy status and tenure (whether the unit is owner or renter occupied). SF1 does not include information on incomes, poverty status, overcrowded housing or age of housing. These topics will be covered in Summary File 3. Data are available for states, counties, county subdivisions, places, census tracts, block groups, and, where applicable, American Indian and Alaskan Native Areas and Hawaiian Home Lands. The SF1 data are available on the Bureau's web site and may be retrieved from American FactFinder as tables, lists, or maps. Users may also download a set of compressed ASCII files for each state via the Bureau's FTP server. There are over 8000 data items available for each geographic area. The full listing of these data items is available here as a downloadable compressed data base file named TABLES.ZIP. The uncompressed is in FoxPro data base file (dbf) format and may be imported to ACCESS, EXCEL, and other software formats. While all of this information is useful, the Office of Community Planning and Development has downloaded selected information for all states and areas and is making this information available on the CPD web pages. The tables and data items selected are those items used in the CDBG and HOME allocation formulas plus topics most pertinent to the Comprehensive Housing Affordability Strategy (CHAS), the Consolidated Plan, and similar overall economic and community development plans. The information is contained in five compressed (zipped) dbf tables for each state. When uncompressed the tables are ready for use with FoxPro and they can be imported into ACCESS, EXCEL, and other spreadsheet, GIS and database software. The data are at the block group summary level. The first two characters of the file name are the state abbreviation. The next two letters are BG for block group. Each record is labeled with the code and name of the city and county in which it is located so that the data can be summarized to higher-level geography. The last part of the file name describes the contents . The GEO file contains standard Census Bureau geographic identifiers for each block group, such as the metropolitan area code and congressional district code. The only data included in this table is total population and total housing units. POP1 and POP2 contain selected population variables and selected housing items are in the HU file. The MA05 table data is only for use by State CDBG grantees for the reporting of the racial composition of beneficiaries of Area Benefit activities. The complete package for a state consists of the dictionary file named TABLES, and the five data files for the state. The logical record number (LOGRECNO) links the records across tables.

Many of the U.S.’s most populated areas are within miles of the coast. As the sea level rises in many areas, these cities are being exposed to more and more nuisance floods - not just from extreme events like Hurricane Sandy, but also when routine rain storms occur. This map plots data from NOAA showing the results of an analysis of tide gauge and satellite data from around the country. City locations colored in blue-green are experiencing positive sea level rise, whereas areas colored in light brown are experiencing negative sea level rise. This feature service includes pop-ups that indicate the city, the rate of sea level rise (feet per century) and the statistical 95% confidence level. The latter gives an indication of how much more or less rise can be expected from the average. Original data from NOAA: https://tidesandcurrents.noaa.gov/sltrends/