This service provides vector polygon dataset defining the official boundaries of the 100 counties within North Carolina as well as the boundaries between North Carolina and the states which border North Carolina.The North Carolina county polygon boundary service provides location information for North Carolina State and County Boundary lines derived from the best available survey and/or Geographic Information System (GIS) data. Sources for information are the North Carolina Geodetic Survey (NCGS), NC Department of Transportation (NCDOT), United States Geological Survey (USGS), and field surveys conducted by licensed surveyors in North Carolina and neighboring states that have been approved and recorded in their respective counties. Some boundaries cannot be surveyed in cases where boundaries are coincident with river centers. North Carolina Geodetic Survey assists counties on a cooperative basis (NC General Statute 153A-18) in defining and monumenting the location of uncertain or disputed boundaries as established by law. Some counties have completed boundary surveys for at least a portion of their county boundary. However, the majority of county boundaries have not been surveyed and are represented by the best currently available data from GIS sources, including NCDOT county maps (which originally came from the USGS) and updated county parcel maps.This data is updated annually, first quarter (usually in February).MetadataThe metadata for the contained layer of the NCDOT County Boundaries Service is available through the following link:County Boundaries PolygonPoint of Contact North Carolina Department of Information Technology -Transportation, GIS UnitGIS Data and Services ConsultantContact information:gishelp@ncdot.govCentury Center – Building B1020 Birch Ridge DriveRaleigh, NC 27610Hours of service: 9:00am - 5:00pm Monday – FridayContact instructions: Please send an email with any issues, questions, or comments regarding the County Boundaries data. If it is an immediate need, please indicate as such in the subject line in an email.NCDOT GIS Unit GO! NC Product Team

Wake County Boundary

The North Carolina State and County Boundary vector polygon data provides location information for North Carolina State and County Boundary lines derived from the best available survey and/or Geographic Information System (GIS) data. Sources for information are the North Carolina Geodetic Survey (NCGS), NC Department of Transportation (NCDOT), United States Geological Survey (USGS), and field surveys conducted by licensed surveyors in North Carolina and neighboring states that have been approved and recorded in their respective counties. North Carolina Geodetic Survey assists counties on a cooperative basis (NC General Statute 153A-18) in defining and monumenting the location of uncertain or disputed boundaries as established by law. Some counties have completed boundary surveys for at least a portion of their county boundary. However, the majority of county boundaries have not been surveyed and are represented by the best currently available data from GIS sources, including NCDOT county maps (which originally came from the USGS) and updated county parcel maps.

The 2022 cartographic boundary KMLs are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. County subdivisions are the primary divisions of counties and their equivalent entities for the reporting of Census Bureau data. They include legally-recognized minor civil divisions (MCDs) and statistical census county divisions (CCDs), and unorganized territories. In MCD states where no MCD exists or no MCD is defined, the Census Bureau creates statistical unorganized territories to complete coverage. The entire area of the United States, Puerto Rico, and the Island Areas are covered by county subdivisions. The generalized boundaries of legal MCDs are based on those as of January 1, 2022, as reported through the Census Bureau's Boundary and Annexation Survey (BAS). The generalized boundaries of all CCDs, delineated in 21 states, are based on those as reported as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2020 Census.

The NC Center for Geographic Information and Analysis, using US Department of Commerce, Bureau of the Census data, developed the GIS data set versions of the 1990 Census TIGER/Line files for each of the 100 counties in North Carolina. This data is stored in a county library under the layer name tiger90. Associated attribute tables also reside in each tile workspace.

City limit boundaries for City of Fayetteville, Town of Hope Mills, Town of Spring Lake, Town of Eastover, Town of Stedman, Town of Wade, Town of Godwin, Town of Falcon and Town of Linden.

The Cumberland County GIS Data Viewer provides the general public with parcel, zoning, hydrology, soils, utilities and topographic data. You can search for a specific address, street name, parcel number (PIN), or by the owner's name.

This collection comprises geospatial datasets used to create the Beaverdam Valley Neighborhood Association community map and the resulting map in pdf and jpeg formats. This scope of the map covers the borders of Buncombe County, North Carolina, the city limits of Asheville, NC, and the three registered neighborhoods of the Beaverdam Valley (Beaverdam Valley, Hills of Beaverdam, and Beaverdam Run). The geospatial data includes the following layers and associated files:

"AVL City Limits.geojson": City of Asheville GIS municipal boundary data

"AVL City Limits.qmd": QGIS metadata file for the above

"AVL Neighborhoods.geojson": City of Asheville GIS registered neighborhood data

"AVL Neighborhoods.qmd": QGIS metadata file for the above

"Buncombe_County_Parcels.geojson": Buncombe County GIS parcel data.

"Buncombe_County_Parcels.qmd": QGIS metadata file for the above

"BV Boundaries.geojson": Beaverdam Valley Neighborhood boundaries.

"BV Boundaries.qmd": QGIS metadata file for the above

"BV Parcel Intersection.geojson": Intersection of the Beverdam Valley Neighborhood boundaries with the Buncombe County Parcel data.

"BV Parcel Intersection.qmd": QGIS metadata file for the above

"BVNA_Map_2022_v2.pdf": BVNA CIP Community Map

"BVNA_Map_2022_v2_825.jpg": BVNA CIP Community Map

"City Limits.geojson": Buncombe county boundaries and city limits boundaries witin the county.

"QGIS BVNA CIP.zip": Zip file containing the above layers in a QGIS project folder and file.

About the Project: The Beaverdam Valley Neighborhood Association (BVNA) Community Informatics Project aims to gain deeper understanding of the Beaverdam Valley community and to work towards gathering and sharing information about the community and its history. This collection represents a deliverable produced under the 2022-2023 City of Asheville Neighborhood Matching Grant program.

Cumberland County Zip Codes

This service provides the polygon representing the North Carolina state boundary. It allows the entire state to be viewed as one polygon. The boundary is selected from the outermost county boundaries bordering other states and the Atlantic Ocean.MetadataThe metadata for the contained layer of the NCDOT State Boundary Service is available through the following link:NC State BoundaryPoint of Contact North Carolina Department of Information Technology -Transportation, GIS UnitGIS Data and Services ConsultantContact information:gishelp@ncdot.govCentury Center – Building B1020 Birch Ridge DriveRaleigh, NC 27610Hours of service: 9:00am - 5:00pm Monday – FridayContact instructions: Please send an email with any issues, questions, or comments regarding the State Boundary data. If it is an immediate need, please indicate as such in the subject line in an email.NCDOT GIS Unit GO! NC Product Team

NOTE: To download parcels by county DO NOT use the map. Instead:click the Download buttonclick Download parcels by county or all counties at oncescroll to the Direct Data Downloads section and download your dataThis digital geospatial dataset represents parcel boundaries with standard core attributes for a collection of parcel data from North Carolina county data producers and the Eastern Band of Cherokee Indians. The Integrated Cadastral Data Exchange project transformed source datasets from county data producers to create a standardized dataset with consistent attributes (fields). The individual standardized county datasets were aggregated into a single dataset. The aggregated parcel dataset includes all 100 counties in North Carolina plus lands of the Eastern Band of Cherokee Indians. The source geometry is retained as published by individual county data producers. This dataset includes attributes such as ownership, area in acres, assessed value, and other core cadastral attributes. Web services have both polygons (parcel boundaries) and points representing each property, placed at or near the geometric center, with the same set of attributes.See the NC OneMap parcels page for more information.

Cumberland County contour lines of 2ft, 4ft,20, and 100ft

The USGS Topo base map service from The National Map is a combination of contours, shaded relief, woodland and urban tint, along with vector layers, such as geographic names, governmental unit boundaries, hydrography, structures, and transportation, to provide a composite topographic base map. Data sources are the National Atlas for small scales, and The National Map for medium to large scales.

Historical population as enumerated and corrected from 1790 through 2020. North Carolina was one of the 13 original States and by the time of the 1790 census had essentially its current boundaries. The Census is mandated by the United States Constitution and was first completed for 1790. The population has been counted every ten years hence, with some limitations. In 1790 census coverage included most of the State, except for areas in the west, parts of which were not enumerated until 1840. The population for 1810 includes Walton County, enumerated as part of Georgia although actually within North Carolina. Historical populations shown here reflect the population of the respective named county and not necessarily the population of the area of the county as it was defined for a particular census. County boundaries shown in maps reflect boundaries as defined in 2020. Historic boundaries for some counties may include additional geographic areas or may be smaller than the current geographic boundaries. Notes below list the county or counties with which the population of a currently defined county were enumerated historically (Current County: Population counted in). The current 100 counties have been in place since the 1920 Census, although some modifications to the county boundaries have occurred since that time. For historical county boundaries see: Atlas of Historical County Boundaries Project (newberry.org)County Notes: Note 1: Total for 1810 includes population (1,026) of Walton County, reported as a Georgia county but later determined to be situated in western North Carolina. Total for 1890 includes 2 Indians in prison, not reported by county. Note 2: Alexander: *Iredell, Burke, Wilkes. Note 3: Avery: *Caldwell, Mitchell, Watauga. Note 4: Buncombe: *Burke, Rutherford; see also note 22. Note 5: Caldwell: *Burke, Wilkes, Yancey. Note 6: Cleveland: *Rutherford, Lincoln. Note 7: Columbus: *Bladen, Brunswick. Note 8: Dare: *Tyrrell, Currituck, Hyde. Note 9: Hoke: *Cumberland, Robeson. Note 10: Jackson: *Macon, Haywood. Note 11: Lee: *Moore, Chatham. Note 12: Lenoir: *Dobbs (Greene); Craven. Note 13: McDowell: *Burke, Rutherford. Note 14: Madison: *Buncombe, Yancey. Note 15: Mitchell: *Yancey, Watauga. Note 16: Pamlico: *Craven, Beaufort. Note 17: Polk: *Rutherford, Henderson. Note 18: Swain: *Jackson, Macon. Note 19: Transylvania: *Henderson, Jackson. Note 20: Union: *Mecklenburg, Anson. Note 21: Vance: *Granville, Warren, Franklin. Note 22: Walton: Created in 1803 as a Georgia county and reported in 1810 as part of Georgia; abolished after a review of the State boundary determined that its area was located in North Carolina. By 1820 it was part of Buncombe County. Note 23: Watauga: *Ashe, Yancey, Wilkes; Burke. Note 24: Wilson: *Edgecombe, Nash, Wayne, Johnston. Note 25: Yancey: *Burke, Buncombe. Note 26: Alleghany: *Ashe. Note 27: Haywood: *Buncombe. Note 28: Henderson: *Buncombe. Note 29: Person: Caswell. Note 30: Clay: Cherokee. Note 31: Graham: Cherokee. Note 32: Harnett: Cumberland. Note 33: Macon: Haywood.

Note 34: Catawba: Lincoln. Note 35: Gaston: Lincoln. Note 36: Cabarrus: Mecklenburg.
Note 37: Stanly: Montgomery. Note 38: Pender: New Hanover. Note 39: Alamance: Orange.
Note 40: Durham: Orange, Wake. Note 41: Scotland: Richmond. Note 42: Davidson: Rowan. Note 43: Davie: Rowan.Note 44: Forsyth: Stokes. Note 45: Yadkin: Surry.
Note 46: Washington: Tyrrell.Note 47: Ashe: Wilkes. Part III. Population of Counties, Earliest Census to 1990The 1840 population of Person County, NC should be 9,790. The 1840 population of Perquimans County, NC should be 7,346.

This National Geographic Style Map (World Edition) web map provides a reference map for the world that includes administrative boundaries, cities, protected areas, highways, roads, railways, water features, buildings, and landmarks, overlaid on shaded relief and a colorized physical ecosystems base for added context to conservation and biodiversity topics. Alignment of boundaries is a presentation of the feature provided by our data vendors and does not imply endorsement by Esri, National Geographic or any governing authority.This basemap, included in the ArcGIS Living Atlas of the World, uses the National Geographic Style vector tile layer and the National Geographic Style Base and World Hillshade raster tile layers.The vector tile layer in this web map is built using the same data sources used for other Esri Vector Basemaps. For details on data sources contributed by the GIS community, view the map of Community Maps Basemap Contributors. Esri Vector Basemaps are updated monthly.Use this MapThis map is designed to be used as a basemap for overlaying other layers of information or as a stand-alone reference map. You can add layers to this web map and save as your own map. If you like, you can add this web map to a custom basemap gallery for others in your organization to use in creating web maps. If you would like to add this map as a layer in other maps you are creating, you may use the tile layers referenced in this map.

Detailed information on individual parcels within Cumberland County, NC, including the City of Fayetteville, the Town of Hope Mills, the Town of Spring Lake, the Town of Eastover, the Town of Falcon, the Town of Godwin, the Town of Linden, the Town of Stedman, and the Town of Wade. Attributes include:Parcel REID (PIN Number): A unique identifier assigned to each parcel for tax purposes.Owner Information: Name and contact details of the property owner(s).Parcel Boundaries: Geospatial data defining the exact boundaries of each parcel.Assessed Value: The assessed value of the land and any improvements for property tax purposes.Land Use: Current land use classification (e.g., residential, commercial, agricultural).Size: Area of the parcel in square feet or acres.Zoning: Zoning classification and any applicable zoning restrictions.Legal Descriptions: Detailed legal description of the parcel boundaries and location.This layer is crucial for tax assessors, urban planners, developers, and other stakeholders who require accurate and up-to-date parcel information for decision-making and operational purposes. It supports a wide range of applications, including property tax assessments, land use planning, infrastructure development, and real estate transactions.More information at https://cumberlandgis.maps.arcgis.com/apps/webappviewer/index.html?id=a6ea68995c2349e9a177366288589be7

The U.S. Geological Survey South Atlantic Water Science Center, in cooperation with the South Carolina Department of Transportation, implemented a South Carolina StreamStats application in 2018. This shapefile dataset contains vector lines representing streams, rivers, and ditches that were used in preparing the underlying data for the South Carolina StreamStats application. Data were compiled from multiple sources, but principally represent lidar-derived linework from the South Carolina Department of Natural Resources and the South Carolina Lidar Consortium.The South Carolina hydrography lines were created from elevation rasters that ranged from 4 to 10 ft resolution, to produce a product of approximately 1:6,000-scale. Other sources include the 1:24,000 scale high resolution National Hydrography Dataset streamlines [for streamlines in Georgetown County (SC), NC, and GA] and the 1:4,800 scale local-resolution North Carolina Stream Mapping Project lines (mountain counties). These ...

This web service depicts raster contour lines that are generated on-the-fly from 3-ft. NC Dept. of Public Safety DEMs using the ArcGIS contour function. They are created for visualization and have been smoothed for a more cartographic-pleasing appearance. These contour lines do not have elevation values attached to them. However, if displayed in a GIS application, an "identify" on the map will display the elevation value of the contour based on the 3-ft. DEM source. This contour layer can be overlaid on a map and provide information regarding terrain without obscuring the underlying data. The contour interval is 20 ft.The DEMs these raster contours are based on can be downloaded from the Direct Data Downloads section on the NCOneMap.gov website. Unsmoothed vector contour lines can also be downloaded. Do not use the map to download the raster contours (JPG, PNG, etc).

Generic wall map of North Carolina showing roads, water bodies, and county/municipal boundaries. The map is in PDF format and is 60" x 32". It is suitable for printing. The map was created in February 2012.

This service provides base mapping for NCDOT’s 14 Division Boundary Polygons.North Carolina Dept. of Transportation Division Polygons as selected from County Boundaries. Most of the lines currently are from the DOT county maps which originally come from USGS but might have been updated by the county parcel maps. NCDOT Divisions are made up of multiple North Carolina counties. The North Carolina county boundary service provides location information for North Carolina County Boundary lines derived from the best available survey and/or Geographic Information System (GIS) data. Sources for information are the North Carolina Geodetic Survey (NCGS), NC Department of Transportation (NCDOT), United States Geological Survey (USGS), and field surveys conducted by licensed surveyors. Most of the lines currently are from the DOT county maps which originally come from USGS but might have been updated by the county parcel maps.MetadataThe metadata for the contained layer of the NCDOT Division Boundaries Service is available through the following link:Division BoundariesPoint of ContactPoint of Contact for the NCDOT Division Boundaries Service:North Carolina Department of Information Technology -Transportation, GIS UnitGIS Data and Services ConsultantContact information:gishelp@ncdot.govCentury Center – Building B1020 Birch Ridge DriveRaleigh, NC 27610Hours of service: 9:00am - 5:00pm Monday – FridayContact instructions: Please send an email with any issues, questions, or comments regarding the NCDOT Divisions Boundaries data. If it is an immediate need, please indicate as such in the subject line in an email.NCDOT GIS Unit GO! NC Product Team