This data set contains parcel boundaries and associated attribute data for communities in New Hampshire. It is compiled and managed by the NH Department of Revenue Administration to support property tax equalization activities. Data was last updated in April, 2016.The map services includes 3 layers: 1) parcel polygons with attributes; 2) parcel lines (for communities without polygon data); 3) parcel points, carrying the attributes associated with the parcel lines. Basic documentation is available here; land use codes are available here.

The New Hampshire State Boundary (nh) layer provides a digital representation of the New Hampshire state boundary.It was derived from the 1:24,000-scale USGS Digital Line Graphs (DLGs).

The New Hampshire Hydrography Dataset (NHHD) is a feature-based database that interconnects and uniquely identifies the stream segments or reaches that make up the state's surface water drainage system. The NHHD, developed at 1:24,000 scale, is an extract from the high-resolution National Hydrography Dataset (NHD) housed at the US Geological Survey.The NHHD Shapefile Extract contains the NHDFlowline, NHDWaterbody and NHDArea feature classes from the original NHHD geodatabase. These shapefiles cover the extent of the sixteen cataloging units that intersect the State of NH, and contain reach codes for networked features, stream order, flow direction, names, and centerline representations for areal water bodies. Reaches are also defined on waterbodies and the approximate shorelines of the the Atlantic Ocean. However, because this data is no longer contained in the original geodatabase, the networking capabilities of the NHDFlowline has been lost. This dataset contains data published by USGS in April 2019.

The New Hampshire Political Boundaries (pbnh) layer provides a digital representation of corporate boundaries at the town level. It was derived from the 1:24,000-scale USGS Digital Line Graphs (DLGs).

SSURGO depicts information about the kinds and distribution of soils on the landscape. The soil map and data used in the SSURGO product were prepared by soil scientists as part of the National Cooperative Soil Survey.The dataset was downloaded on 1/26/2021 from the NRCS GeoSpatial Data Gateway (https://gdg.sc.egov.usda.gov/GDGOrder.aspx) and processed by NH GRANIT staff at the UNH Earth Systems Research Center to:1) Project to NH State Plane feet, NAD832) Clip to the NH state boundary3) Attach key soil attributes from the collection of related tables distributed by NRCS (see SSURGO_Metadata_-_Table_Column_Descriptions.pdf for descriptions)4) Add and populate the "acres" fieldThe remainder of this metadata record is as provided with the downloaded source data, with the exception of the addition of several theme keywords and updating the Spatial Reference Information to reflect the processing described above.

Statewide dataset containing the location of geodetic control points and their associated attributes. For attribute data dictionary, see the file Geodetic-CodeGuide.doc.

The Digital Bedrock Geologic-GIS Map of the Hartland and North Hartland 7.5' Quadrangles, New Hampshire is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (hanh_bedrock_geology.gdb), and a 2.) Open Geospatial Consortium (OGC) geopackage. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file (hanh_bedrock_geology.mapx) and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (hanh_bedrock_geology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) this file (saga_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (saga_bedrock_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (hanh_bedrock_geology_metadata_faq.pdf). Please read the saga_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. QGIS software is available for free at: https://www.qgis.org/en/site/. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: U.S. Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (hanh_bedrock_geology_metadata.txt or hanh_bedrock_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:24,000 and United States National Map Accuracy Standards features are within (horizontally) 12.2 meters or 40 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

This data set contains parcel boundaries and associated attribute data for communities in NH. It is compiled and managed by the NH Department of Revenue Administration to support property tax equalization activities. The full project data set includes the GIS parcel mosaic layer and a linked CAMA database with approximately 50 attributes per parcel. A subset of those attributes is included here. See related document for an explanation of attribute codes. Note that attributes may not be available for all parcel polygons. In particular, they may not be available for multi-structure parcels.

These data were extracted from the High Resolution National Hydrography Dataset Plus (NHDPlus HR), an integrated set of geospatial data layers, including the National Hydrography Dataset (NHD), National Watershed Boundary Dataset (WBD), and 3D Elevation Program Digital Elevation Model (3DEP DEM). The NHDPlus HR combines the NHD, 3DEP DEMs, and WBD to a data suite that includes the NHD stream network with linear referencing functionality, the WBD hydrologic units, elevation-derived catchment areas for each stream segment, "value added attributes" (VAAs), and other features that enhance hydrologic data analysis and routing.

This map is to help people locate LiDAR-derived 2-ft contour data sets in New Hampshire. Both HUC 8 and HUC 10 units are displayed along with the HUC labels so that users can find which contour service covers their area of interest. For services residing on ArcGIS Online, contour services are available by HUC 10. HUC 8 services (including HUC 10 sub layers) are available in the EDP folder on nhgeodata.unh.edu/nhgeodata/rest/services.

The Digital Bedrock Geologic-GIS Map of the Saint-Gaudens National Historical Park and Vicinity, New Hampshire is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (saga_bedrock_geology.gdb), a 2.) Open Geospatial Consortium (OGC) geopackage, and 3.) 2.2 KMZ/KML file for use in Google Earth, however, this format version of the map is limited in data layers presented and in access to GRI ancillary table information. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file (saga_bedrock_geology.mapx) and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (saga_bedrock_geology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). The OGC geopackage is supported with a QGIS project (.qgz) file. Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) this file (saga_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (saga_bedrock_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (saga_bedrock_geology_metadata_faq.pdf). Please read the saga_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. Google Earth software is available for free at: https://www.google.com/earth/versions/. QGIS software is available for free at: https://www.qgis.org/en/site/. Users are encouraged to only use the Google Earth data for basic visualization, and to use the GIS data for any type of data analysis or investigation. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: U.S. Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (saga_bedrock_geology_metadata.txt or saga_bedrock_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:24,000 and United States National Map Accuracy Standards features are within (horizontally) 12.2 meters or 40 feet of their actual _location as presented by this dataset. Users of this data should thus not assume the _location of features is exactly where they are portrayed in Google Earth, ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

2011 NED hillshade for New Hampshire

This Feature Class was created in 2014 as a part of the State of Connecticut’s Policy Intergovernmental Policy Division grant to the Southern Connecticut Regional Council of Governments for the Regional Web-Based GIS program.The development of the parcel layer was started in 1998-1999 by East Coast Mapping of New Hampshire. East Coast created CAD Drawings for the Town of Wallingford generated through the digitization of Town of Wallingford’s Tax Maps. By use of stereoscopic techniques East Coast created a seamless parcel base from a 2000 aerial flight’s orthophoto’s (1x600ft scale). The CAD files and base were then given to the Wallingford’s Town Engineer who maintained the base. New England Geosystems of Middletown, CT received the CAD files from Wallingford in 2014 and converted the files to GIS format to create the parcel layer. Last Updated: April 2019

These data were automated to provide an accurate high-resolution historical shoreline of Hampton Harbor, New Hampshire suitable as a geographic information system (GIS) data layer. These data are derived from shoreline maps that were produced by the NOAA National Ocean Service including its predecessor agencies which were based on an office interpretation of imagery and/or field survey. The...

The Digital Bedrock Geologic-GIS Map of the Mount Ascutney 7.5 'x 15' Quadrangle, New Hampshire is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (mtas_bedrock_geology.gdb), and a 2.) Open Geospatial Consortium (OGC) geopackage. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file (mtas_bedrock_geology.mapx) and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (mtas_bedrock_geology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) this file (saga_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (saga_bedrock_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (mtas_bedrock_geology_metadata_faq.pdf). Please read the saga_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. QGIS software is available for free at: https://www.qgis.org/en/site/. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: U.S. Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (mtas_bedrock_geology_metadata.txt or mtas_bedrock_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:24,000 and United States National Map Accuracy Standards features are within (horizontally) 12.2 meters or 40 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

Trails data compiled by NH Office of Strategic Initiatives and NH Fish and Game Department from multiple public information sources including online maps and spatial data, orthophotos, and field data collection with handheld GPS units. Positional accuracy will vary. Coverage and attributes should not be construed as complete.

This map provides access to vector data layers that incorporate Landsat reflectance data and LiDAR elevation data within the state of New Hampshire. These data were developed by NH GRANIT using data collected between 2011 and 2018. The polygon boundaries represent "image objects" that were derived using eCognition image segmentation software, grouping image pixels into contiguous segments based on spectral reflectance and LiDAR. The attributes for each polygon were then calculated from the LiDAR crown height layer. Attributes include maximum, minimum, and mean elevation above the ground and standard deviation within each polygon. Elevation is in meters. The boundary of each layer is determined by the extent of a LiDAR data collection; Landsat reflectance data were clipped to the extent of the LiDAR. The dates of data collection are listed in the metadata for each data layer.These data were developed by NH GRANIT using funding from the New Hampshire Space Grant Consortium.

The New Hampshire House of Representatives District Boundaries, 2022, contains "base" district boundaries drawn by the New Hampshire Legislature based on the 2020 US Census population count. Companion shape file NHHouseDists2022_float contains boundaries of NH House of Representatives "floterial" districts, which overlay the base districts. Both shape files are required to depict all NH House of Representatives districts. District boundaries were derived by applying district codes retrieved from the NH Secretary of State web site to the geometry provided by the GRANIT town boundary layer (PBNH).

This data layer contains point locations representing recreation sites (parks, playing fields, water recreation, etc.) for New Hampshire. A companion data set, "OEP Recreation Inventory: Polygons", is also available containing New Hampshire recreation sites extracted from the "Conservation/Public Lands" database.

This data set contains imagery from the National Agriculture Imagery Program (NAIP) acquired in 2011. The NAIP acquires digital ortho imagery during the agricultural growing seasons in the continental U.S. A primary goal of the NAIP program is to enable availability of ortho imagery within one year of acquisition. The NAIP provides two main products: 1 meter ground sample distance (GSD) ortho imagery rectified to a horizontal accuracy within +/- 5 meters of reference digital ortho quarter quads (DOQQ's) from the National Digital Ortho Program (NDOP) or from the National Agriculture Imagery Program (NAIP); 1 meter GSD ortho imagery rectified within +/- 6 meters to true ground. The imagery may contain as much as 10% cloud cover per tile. The tiling format of the USDA_FSA NAIP imagery is based on a 3.75' x 3.75' quarter quadrangle with a 300 meter buffer on all four sides