This feature service is available through CT ECO, a partnership between UConn CLEAR and CT DEEP. It is also available as a map service and a tiled map service. This dataset is a statewide service of municipal parcels (properties) including their geometry (polygon shape) and attributes (tabular information about each parcel). In order to preserve the attributes, each municipality is added individually to the service.

See full Data Guide here. This layer includes polygon features that depict protected open space for towns of the Protected Open Space Mapping (POSM) project, which is administered by the Connecticut Department of Energy and Environmental Protection, Land Acquisition and Management. Only parcels that meet the criteria of protected open space as defined in the POSM project are in this layer. Protected open space is defined as: (1) Land or interest in land acquired for the permanent protection of natural features of the state's landscape or essential habitat for endangered or threatened species; or (2) Land or an interest in land acquired to permanently support and sustain non-facility-based outdoor recreation, forestry and fishery activities, or other wildlife or natural resource conservation or preservation activities. Includes protected open space data for the towns of Andover, Ansonia, Ashford, Avon, Beacon Falls, Canaan, Clinton, Berlin, Bethany, Bethel, Bethlehem, Bloomfield, Bridgewater, Bolton, Brookfield, Brooklyn, Canterbury, Canton, Chaplin, Cheshire, Colchester, Colebrook, Columbia, Cornwall, Coventry, Cromwell, Danbury, Derby, East Granby, East Haddam, East Hampton, East Hartford, East Windsor, Eastford, Ellington, Enfield, Essex, Farmington, Franklin, Glastonbury, Goshen, Granby, Griswold, Groton, Guilford, Haddam, Hampton, Hartford, Hebron, Kent, Killingworth, Lebanon, Ledyard, Lisbon, Litchfield, Madison, Manchester, Mansfield, Marlborough, Meriden, Middlebury, Middlefield, Middletown, Monroe, Montville, Morris, New Britain, New Canaan, New Fairfield, New Milford, New Hartford, Newington, Newtown, Norfolk, North, Norwich, Preston, Ridgefield, Shelton, Stonington, Oxford, Plainfield, Plainville, Pomfret, Portland, Prospect, Putnam, Redding, Rocky Hill, Roxbury, Salem, Salisbury, Scotland, Seymour, Sharon, Sherman, Simsbury, Somers, South Windsor, Southbury, Southington, Sprague, Sterling, Suffield, Thomaston, Thompson, Tolland, Torrington, Union, Vernon, Wallingford, Windham, Warren, Washington, Waterbury, Watertown, West Hartford, Westbrook, Weston, Wethersfield, Willington, Wilton, Windsor, Windsor Locks, Wolcott, Woodbridge, Woodbury, and Woodstock. Additional towns are added to this list as they are completed. The layer is based on information from various sources collected and compiled during the period from March 2005 through the present. These sources include but are not limited to municipal Assessor's records (the Assessor's database, hard copy maps and deeds) and existing digital parcel data. The layer represents conditions as of the date of research at each city or town hall. The Protected Open Space layer includes the parcel shape (geometry), a project-specific parcel ID based on the Town and Town Assessor's lot numbering system, and system-defined (automatically generated) fields. The Protected Open Space layer has an accompanying table containing more detailed information about each feature (parcel). This table is called Protected Open Space Dat, and can be joined to Protected Open Space in ArcMap using the parcel ID (PAR_ID) field. Detailed information in the Protected Open Space Data attribute table includes the Assessor's Map, Block and Lot numbers (the Assessor's parcel identification numbering system), the official name of the parcel (such as the park or forest name if it has one), address and owner information, the deed volume and page numbers, survey information, open space type, the unique parcel ID number (Par_ID), comments collected by researchers during city/town hall visits, and acreage. This layer does not include parcels that do not meet the definition of open space as defined above. Features are stored as polygons that represent the best available locational information, and are "best fit" to the land base available for each. The Connecticut Department of Environmental Protection's (CTDEP) Permanently Protected Open Space Phase Mapping Project Phase 1 (Protected Open Space Phase1) layer

The Digital Surficial Geologic-GIS Map of the part of the Milford Quadrangle, New Jersey and Pennsylvania is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (milf_surficial_geology.gdb), and a 2.) Open Geospatial Consortium (OGC) geopackage. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file (milf_surficial_geology.mapx) and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (milf_surficial_geology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) A GIS readme file (dewa_surficial_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (dewa_surficial_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (milf_surficial_geology_metadata_faq.pdf). Please read the dewa_surficial_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. QGIS software is available for free at: https://www.qgis.org/en/site/. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: New Jersey Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (milf_surficial_geology_metadata.txt or milf_surficial_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:24,000 and United States National Map Accuracy Standards features are within (horizontally) 12.2 meters or 40 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

Connecticut Parcels for Protected Open Space Mapping is a polygon feature-based layer that includes basic parcel-level information for some towns in Connecticut. This 2009 parcel layer includes information provided by individual municipalities. These parcel data are incomplete and out of date. The accuracy, currency and completeness of the data reflect the content of the data at the time DEEP acquired the data from the individual municipalities. Attribute information is comprised of values such as town name and map lot block number. These data are not updated by CT DEEP and should only be used as a general reference. Critical decisions involving parcel-level information should be based on more recently acquired information from the respective municipalities. These parcels are not to be considered legal boundaries such as boundaries determined from certain classified survey maps or deed descriptions. Parcel boundaries shown in this layer are based on information from municipalities used for property tax purposes. Largely due to differences in horizontal accuracy among various data layers, do not expect these parcel boundaries to line up exactly with or be properly postioned relative to features shown on other layers available from CT DEEP such as scanned USGS topography quadrangle maps, roads, hydrography, town boundaries, and even orthophotograpy.

The data in the parcel layer was obtained from individual Connecticut municipalities. An effort was made to collect data once from each municipality. The data acquisition date for each set of municipally-supplied parcel data was not recorded and CT DEEP does not keep this information up-to-date. Consequently, these data are out-of-date, incomplete and do not reflect the current state of property ownership in these municipalities. These parcels are not to be considered legal boundaries such as boundaries determined from certain classified survey maps or deed descriptions. Parcel boundaries shown in this layer are based on information from municipalities used for property tax purposes. Parcel boundaries and attribute information have not been updated in this layer since the time the information was originally acquired by CT DEEP. For example, property boundaries are incorrect where subdivisions have occurred. Also, field attribute values are populated only if the information was supplied to CT DEEP. For example, parcels in some towns lack location (street name) information or possibly map lot block values. Therefore, field attributes are inconsistent, may include gaps, and do not represent complete sets of values among all towns. They should not be compared and analyzed across towns. It is emphasized that critical decisions involving parcel-level information be based on more recently obtained information from the respective municipalities. These data are only suitable for general reference purposes. Be cautious when using these data. Many Connecticut municipalities provide access to more up-to-date and more detailed property ownership information on the Internet. This dataset includes parcel information for the following towns: Andover, Ansonia, Ashford, Avon, Beacon Falls, Berlin, Bethany, Bethel, Bethlehem, Bloomfield, Bolton, Branford, Bridgewater, Brookfield, Brooklyn, Canaan, Canterbury, Canton, Chaplin, Cheshire, Chester, Clinton, Colchester, Colebrook, Columbia, Cornwall, Coventry, Cromwell, Danbury, Darien, Deep River, Derby, East Granby, East Haddam, East Hampton, East Hartford, East Lyme, East Windsor, Eastford, Ellington, Enfield, Essex, Farmington, Franklin, Glastonbury, Granby, Greenwich, Griswold, Groton, Guilford, Haddam, Hamden, Hartford, Hebron, Kent, Killingly, Killingworth, Lebanon, Ledyard, Lisbon, Litchfield, Lyme, Madison, Manchester, Mansfield, Marlborough, Meriden, Middlebury, Middlefield, Middletown, Milford, Monroe, Montville, Morris, New Britain, New Canaan, New Hartford, New Haven, New London, New Milford, Newington, Newtown, Norfolk, North Branford, North Canaan, North Haven, North Stonington, Norwalk, Norwich, Old Lyme, Old Saybrook, Orange, Oxford, Plainfield, Plainville, Plymouth, Pomfret, Portland, Preston, Prospect, Putnam, Redding, Rocky Hill, Roxbury, Salem, Salisbury, Scotland, Seymour, Sharon, Shelton, Sherman, Simsbury, Somers, South Windsor, Southbury, Southington, Sprague, Stamford, Sterling, Stonington, Stratford, Suffield, Thomaston, Tolland, Torrington, Union, Vernon, Voluntown, Wallingford, Warren, Washington, Waterbury, Waterford, Watertown, West Hartford, West Haven, Westbrook, Westport, Wethersfield, Willington, Wilton, Winchester, Windsor, Windsor Locks, Wolcott, Woodbridge, Woodbury, and Woodstock. For additional information on the Protected Open Space Mapping project, contact the Department of Energy and Environmental Protection, Division of Land Acquisition and Management at 860-424-3016.

The Coastal Boundary layer is a 1:24,000-scale, polygon feature-based layer of the legal mylar-based maps adopted by the Commissioner of the Department of Environmental Protection (DEP) (i.e., maps were adopted on a town by town basis) showing the extent of lands and coastal waters as defined by Connecticut General Statute (C.G.S.) 22a-93(5)) within Connecticut's coastal area (defined by C.G.S. 22a-94(c)). The coastal boundary is a hybrid of the original 1:24,000 version maps prepared by DEP consistent with C.G.S. 22a-94(d) (Coastal Area) and the revised boundary mapping undertaken by twenty-two coastal towns prepared pursuant to C.G.S. 22a-94(f). This layer therefore does not replace the legal maps and may not be used for legal determinations. The Coastal Boundary layer includes a single polygon feature that represents the coastal boundary. No other features are included in this layer. Data is compiled at 1:24,000 scale. Attribute information is comprised of an Av_Legend attribute and a CoastB_Flg attribute to denote the coastal boundary. Other attributes include automatically calculated Shape_Length and Shape_Area fields. This data is not updated. Any regulated activity conducted within the coastal boundary by a municipal agency (i.e., plans of development, zoning regulations, municipal coastal programs and coastal site plan review (i.e., site plans submitted to zoning commission, subdivision or resubdivision plans submitted to planning commission, application for special permit or exception to the zoning or planning commissions or zoning board of appeals, variance submitted to zoning board of appeals and a referral of a municipal project)) must be conducted in a manner consistent with the requirements of the Connecticut Coastal Management Act (CMA; C.G.S. 22a-90 to 22a-113). As the Coastal Boundary is a hybrid of the Coastal Area, all state and federal agency activities must be consistent with the requirements of the CMA. As defined in C.G.S. 22a-94(b) the coastal boundary is a "continuous line delineated on the landward side by the interior contour elevation of the one hundred year frequency coastal flood zone, as defined and determined by the National Flood Insurance Act, as amended (USC 42 Section 4101, P.L. 93-234), or a one thousand foot linear setback measured from the mean high water mark in coastal waters, or a one thousand foot linear setback measured from the inland boundary of tidal wetlands mapped under section 22a-20, whichever is farthest inland; and shall be delineated on the seaward side by the seaward extent of the jurisdiction of the state." The original boundary maps were created in 1979 on stable mylar overlay using the 1:24,000-scale US Geological Survey topographic quadrangle maps (mylar film format). The source for tidal wetland maps were the legal 1:24,000 maps (mylar format) adopted by the Commissioner of DEP and transformed to 1:24,000 mylar-scale maps by the Office of Policy and Management (OPM) using an accurate pantograph. OPM similarly converted FEMA's flood insurance maps (various scales) to a 1:24,000 mylar overlay. The inland extent of coastal waters was plotted on 1:24,000 USGS topographic maps following the procedures and sources described in The Boundary Between Saltwater and Freshwater in Connecticut, December 1978 prepared by the State of Connecticut, Department of Environmental Protection, Coastal Area Management Program. The following twenty-two towns have adopted municipal coastal boundaries: Chester, Clinton, Darien, Deep River, East Haven, Essex, Fairfield, Greenwich, Groton, Guilford, Hamden, Ledyard, Madison, Milford, New Haven, New London, North Haven, Norwalk, Old Lyme, Old Saybrook, Stamford and Waterford. The coastal boundary maps for these towns may be at different scales than the original DEP draft maps and may contain minor adjustments to the boundary as permitted in C.G.S. 22a-94(f).

Coastal Area & Boundary Polygon:

The Coastal Area layer is a 1:24,000-scale, polygon feature-based layer that includes the land and waters that lie within the Coastal Area as defined by Connecticut General Statute (C.G.S.) 22a-94(a). Activities and actions conducted within the coastal area by Federal and State Agencies (i.e., U.S. Army Corps of Engineers (USACOE), DEP regulatory programs, and state plans and actions) must be consistent with all of the applicable standards and criteria contained in the Connecticut Coastal Management Act (C.G.S. 22a-90 to 22a-113). A subset of the Coastal Area, the Coastal Boundary, represents an area within which activities regulated or conducted by coastal municipalities must be consistent with the Coastal Management Act. As defined in this section of the statutes, the Coastal Area includes the land and water within the area delineated by the following: the westerly, southerly and easterly limits of the state's jurisdiction in Long Island Sound; the towns of Greenwich, Stamford, Darien, Norwalk, Westport, Fairfield, Bridgeport, Stratford, Shelton, Milford, Orange, West Haven, New Haven, Hamden, North Haven, East Haven, Branford, Guilford, Madison, Clinton, Westbrook, Deep River, Chester, Essex, Old Saybrook, Lyme, Old Lyme, East Lyme, Waterford, New London, Montville, Norwich, Preston, Ledyard, Groton and Stonington. This layer includes a single polygon feature defined by the boundaries described above. Attribute information is comprised of an Av_Legend to denote the coastal area. Data is compiled at 1:24,000 scale. This data is not updated.

The Coastal Boundary layer is a 1:24,000-scale, polygon feature-based layer of the legal mylar-based maps adopted by the Commissioner of the Department of Environmental Protection (DEP) (i.e., maps were adopted on a town by town basis) showing the extent of lands and coastal waters as defined by Connecticut General Statute (C.G.S.) 22a-93(5)) within Connecticut's coastal area (defined by C.G.S. 22a-94(c)). The coastal boundary is a hybrid of the original 1:24,000 version maps prepared by DEP consistent with C.G.S. 22a-94(d) (Coastal Area) and the revised boundary mapping undertaken by twenty-two coastal towns prepared pursuant to C.G.S. 22a-94(f). This layer therefore does not replace the legal maps and may not be used for legal determinations. The Coastal Boundary layer includes a single polygon feature that represents the coastal boundary. No other features are included in this layer. Data is compiled at 1:24,000 scale. Attribute information is comprised of an Av_Legend attribute and a CoastB_Flg attribute to denote the coastal boundary. Other attributes include automatically calculated Shape_Length and Shape_Area fields. This data is not updated. Any regulated activity conducted within the coastal boundary by a municipal agency (i.e., plans of development, zoning regulations, municipal coastal programs and coastal site plan review (i.e., site plans submitted to zoning commission, subdivision or resubdivision plans submitted to planning commission, application for special permit or exception to the zoning or planning commissions or zoning board of appeals, variance submitted to zoning board of appeals and a referral of a municipal project)) must be conducted in a manner consistent with the requirements of the Connecticut Coastal Management Act (CMA; C.G.S. 22a-90 to 22a-113). As the Coastal Boundary is a hybrid of the Coastal Area, all state and federal agency activities must be consistent with the requirements of the CMA. As defined in C.G.S. 22a-94(b) the coastal boundary is a "continuous line delineated on the landward side by the interior contour elevation of the one hundred year frequency coastal flood zone, as defined and determined by the National Flood Insurance Act, as amended (USC 42 Section 4101, P.L. 93-234), or a one thousand foot linear setback measured from the mean high water mark in coastal waters, or a one thousand foot linear setback measured from the inland boundary of tidal wetlands mapped under section 22a-20, whichever is farthest inland; and shall be delineated on the seaward side by the seaward extent of the jurisdiction of the state." The original boundary maps were created in 1979 on stable mylar overlay using the 1:24,000-scale US Geological Survey topographic quadrangle maps (mylar film format). The source for tidal wetland maps were the legal 1:24,000 maps (mylar format) adopted by the Commissioner of DEP and transformed to 1:24,000 mylar-scale maps by the Office of Policy and Management (OPM) using an accurate pantograph. OPM similarly converted FEMA's flood insurance maps (various scales) to a 1:24,000 mylar overlay. The inland extent of coastal waters was plotted on 1:24,000 USGS topographic maps following the procedures and sources described in The Boundary Between Saltwater and Freshwater in Connecticut, December 1978 prepared by the State of Connecticut, Department of Environmental Protection, Coastal Area Management Program. The following twenty-two towns have adopted municipal coastal boundaries: Chester, Clinton, Darien, Deep River, East Haven, Essex, Fairfield, Greenwich, Groton, Guilford, Hamden, Ledyard, Madison, Milford, New Haven, New London, North Haven, Norwalk, Old Lyme, Old Saybrook, Stamford and Waterford. The coastal boundary maps for these towns may be at different scales than the original DEP draft maps and may contain minor adjustments to the boundary as permitted in C.G.S. 22a-94(f).

Shellfish Area Classification Set:

The Connecticut Department of Environmental Protection cooperated with the Department of Agriculture, Bureau of Aquaculture to publish the Connecticut Shellfish Classification data. More recent information may be available from the Department of Agriculture since the time this information was originally published in 2007. For information or questions on shellfish area classifications contact the Connecticut Department of Agriculture, Bureau of Aquaculture (DA/BA). Mailing address: P.O. Box 97, Milford, CT, 06460, USA. Voice: 203-874-0696. Fax: 203-783-9976. E-mail: dept.agriculture@snet.net. Final authority for the classification of any shellfish area rests with the DA/BA. One of a set of three 1:24,000-scale datalayers that represent the classifications of shellfish growing waters for the State of Connecticut shoreline towns. This datalayer is composed of polygon features. The shellfishing areas are delineated and classified by the DA/BA, which is the state shellfish control authority in Connecticut. The Connecticut Department of Environmental Protection (DEP) applied information from the DA/BA to the hydrography data to create digital data of shellfish area classifications. DA/BA reassesses pollution sources and shellfish growing areas annually. The digital data is current to that effective date or last amended date recorded on the assessment date list (see supplemental information). This data is subject to change and the DA/BA may have more recent information for some areas. DEP cooperated with the DA/BA to publish the DA/BA Shellfish Area Classifications data. More recent shellfish classification information may now be available from DA/BA since the time this information was originally published in 2007. The three classification datalayers are feature based. Waterbodies, such as rivers and lakes and ponds, that appear as area features in the hydrography datalayer are classified in the Shellfish Area polygon shapefile. Smaller water bodies, such as streams and creeks, that appear as line features in the hydrography datalayer are classified in the Shellfish Area line shapefile. A separate point shapefile contains the marinas that are classified by DA/BA. Contact DA/BA or local health departments for additional information regarding the classification of marinas and anchorage areas. Three additional datalayers add to the classification picture. Markers, such as buoys, demarcation signs and piers, are referred to in DA/BA text describing the shellfish area classifications. The town boundary lines as depicted on DA/BA oyster/shellfish ground charts extend to the Connecticut/New York mid-Long Island Sound boundary line. The jurisdiction line on the charts indicates the boundary between state and town jurisdictional control over shellfish grounds. The jurisdiction line is separate from the shellfishing area classifications

The Connecticut Department of Environmental Protection cooperated with the Department of Agriculture, Bureau of Aquaculture to publish the Connecticut Shellfish Classification data. More recent information may be available from the Department of Agriculture since the time this information was originally published in 2006. For information or questions on shellfish area classifications contact the Connecticut Department of Agriculture, Bureau of Aquaculture (DA/BA). Mailing address: P.O. Box 97, Milford, CT, 06460, USA. Voice: 203-874-0696. Fax: 203-783-9976. E-mail: dept.agriculture@snet.net. Final authority for the classification of any shellfish area rests with the DA/BA. This 1:24,000 scale layer depicts town boundary lines as shown on DA/BA oyster/shellfish ground charts. These boundary lines extend to the Connecticut/New York mid-Long Island Sound boundary line. This datalayer is composed of polygon features. See also the corresponding line feature class (Shellfish Area Town Line). This layer is intended to be used for cartographic purposes in conjunction with the 1:24,000 scale Shellfish Area Classifications data that represent the classifications of shellfish growing waters for the State of Connecticut shoreline towns. Shellfish Bed Jurisdiction is a related datalayer that depicts the jurisdiction line on the charts, i.e., the boundary between state and town jurisdictional control over shellfish grounds. It is referenced here to clarify that in some cases the town boundary lines of the Shellfish Area Town Poly layer and the Shellfish Bed Jurisdiction layer are different and are so noted. General Information Applicable to Shellfish Classifications Datalayers: The shellfishing areas are delineated and classified by the DA/BA, which is the state shellfish control authority in Connecticut. The Connecticut Department of Environmental Protection (DEP) applied information from the DA/BA to the hydrography data to create digital data of shellfish area classifications. DA/BA reassesses pollution sources and shellfish growing areas annually. The digital data is current to that effective date or last amended date recorded on the assessment date list (see supplemental information). This data is subject to change and the DA/BA may have more recent information for some areas. The shellfish datalayers that can be used together as a group include Shellfish Area Classification Line, Shellfish Area Classification Poly, Shellfish Area Marina, Shellfish Area Marker, Shellfish Area Town Poly, Shellfish Area Town Line, Shellfish Bed Jurisdiction, and Connecticut Managed Shellfish Beds.