This statistic shows the biggest cities in New Zealand in 2022. In 2022, approximately **** million people lived in Auckland, making it the biggest city in New Zealand.

New Zealand NZ: Population in Largest City data was reported at 1,377,309.000 Person in 2017. This records an increase from the previous number of 1,360,422.000 Person for 2016. New Zealand NZ: Population in Largest City data is updated yearly, averaging 851,045.500 Person from Dec 1960 (Median) to 2017, with 58 observations. The data reached an all-time high of 1,377,309.000 Person in 2017 and a record low of 440,164.000 Person in 1960. New Zealand NZ: Population in Largest City data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s New Zealand – Table NZ.World Bank: Population and Urbanization Statistics. Population in largest city is the urban population living in the country's largest metropolitan area.; ; United Nations, World Urbanization Prospects.; ;

Actual value and historical data chart for New Zealand Population In The Largest City Percent Of Urban Population

A subset of NationalMap consisting of cities extracted from the Place layer with points indicating the city name.

This statistic depicts the distribution of the major cities to the national GDP in New Zealand in 2015. According to the source, in this year, Auckland contributed with ** percent to the national GDP in New Zealand.

New Zealand NZ: Population in Largest City: as % of Urban Population data was reported at 33.266 % in 2017. This records a decrease from the previous number of 33.580 % for 2016. New Zealand NZ: Population in Largest City: as % of Urban Population data is updated yearly, averaging 30.234 % from Dec 1960 (Median) to 2017, with 58 observations. The data reached an all-time high of 34.299 % in 2013 and a record low of 24.415 % in 1961. New Zealand NZ: Population in Largest City: as % of Urban Population data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s New Zealand – Table NZ.World Bank: Population and Urbanization Statistics. Population in largest city is the percentage of a country's urban population living in that country's largest metropolitan area.; ; United Nations, World Urbanization Prospects.; Weighted Average;

This horizontal bar chart displays undergraduate students (people) by city using the aggregation sum in New Zealand. The data is about universities.

In 2024, the main center in New Zealand with the highest number of sunshine hours was Tauranga, with ***** hours. The average temperature for Tauranga was **** degrees Celsius in that year.

NZ Suburbs and Localities describes the spatial extent and name of communities in urban areas (suburbs) and rural areas (localities) for navigation and location purposes.

The suburb and locality boundaries cover New Zealand including North Island, South Island, Stewart Island/Rakiura, Chatham Islands, and nearby offshore islands.

Each suburb and locality is assigned a name, major name, Territorial Authority and, if appropriate, additional in use names. A population estimate is provided for each suburb and locality by Stats NZ.

For more information please refer to the NZ Suburbs and Localities Data Dictionary and the LINZ Website

Changes to NZ Suburbs and Localities can be requested by emailing addresses@linz.govt.nz

Change Request Guidance Documents: - Change Request Process - Change Request Principles, Requirements and Rules

APIs and web services

This dataset is available via ArcGIS Online and ArcGIS REST services, as well as our standard APIs. LDS APIs and OGC web services ArcGIS Online map services

ps-places-metadata-v1.01

SUMMARY

This dataset comprises a pair of layers, (points and polys) which attempt to better locate "populated places" in NZ. Populated places are defined here as settled areas, either urban or rural where densitys of around 20 persons per hectare exist, and something is able to be seen from the air.

RATIONALE

The only liberally licensed placename dataset is currently LINZ geographic placenames, which has the following drawbacks: - coordinates are not place centers but left most label on 260 series map - the attributes are outdated

METHODOLOGY

This dataset necessarily involves cleaving the linz placenames set into two, those places that are poplulated, and those unpopulated. Work was carried out in four steps. First placenames were shortlisted according to the following criterion: - all places that rated at least POPL in the linz geographic places layer, ie POPL, METR or TOWN or USAT were adopted. - Then many additional points were added from a statnz meshblock density analysis.
- Finally remaining points were added from a check against linz residential polys, and zenbu poi clusters.

Spelling is broadly as per linz placenames, but there are differences for no particular reason. Instances of LINZ all upper case have been converted to sentance case. Some places not presently in the linz dataset are included in this set, usually new places, or those otherwise unnamed. They appear with no linz id, and are not authoritative, in some cases just wild guesses.

Density was derived from the 06 meshblock boundarys (level 2, geometry fixed), multipart conversion, merging in 06 usually resident MB population then using the formula pop/area*10000. An initial urban/rural threshold level of 0.6 persons per hectare was used.

Step two was to trace the approx extent of each populated place. The main purpose of this step was to determine the relative area of each place, and to create an intersection with meshblocks for population. Step 3 involved determining the political center of each place, broadly defined as the commercial center.

Tracing was carried out at 1:9000 for small places, and 1:18000 for large places using either bing or google satellite views. No attempt was made to relate to actual town 'boundarys'. For example large parks or raceways on the urban fringe were not generally included. Outlying industrial areas were included somewhat erratically depending on their connection to urban areas.

Step 3 involved determining the centers of each place. Points were overlaid over the following layers by way of a base reference:

a. original linz placenames b. OSM nz-locations points layer c. zenbu pois, latest set as of 5/4/11 d. zenbu AllSuburbsRegions dataset (a heavily hand modified) LINZ BDE extract derived dataset courtesy Zenbu. e. LINZ road-centerlines, sealed and highway f. LINZ residential areas, g. LINZ building-locations and building footprints h. Olivier and Co nz-urban-north and south

Therefore in practice, sources c and e, form the effective basis of the point coordinates in this dataset. Be aware that e, f and g are referenced to the LINZ topo data, while c and d are likely referenced to whatever roading dataset google possesses. As such minor discrepencys may occur when moving from one to the other.

Regardless of the above, this place centers dataset was created using the following criteria, in order of priority:

• attempts to represent the present (2011) subjective 'center' of each place as defined by its commercial/retail center ie. mainstreets where they exist, any kind of central retail cluster, even a single shop in very small places.
• the coordinate is almost always at the junction of two or more roads.
• most of the time the coordinate is at or near the centroid of the poi cluster
• failing any significant retail presence, the coordinate tends to be placed near the main road junction to the community.
• when the above criteria fail to yield a definitive answer, the final criteria involves the centroids of: . the urban polygons . the clusters of building footprints/locations.

To be clear the coordinates are manually produced by eye without any kind of computation. As such the points are placed approximately perhaps plus or minus 10m, but given that the roads layers are not that flash, no attempt was made to actually snap the coordinates to the road junctions themselves.

The final step involved merging in population from SNZ meshblocks (merge+sum by location) of popl polys). Be aware that due to the inconsistent way that meshblocks are defined this will result in inaccurate populations, particular small places will collect population from their surrounding area. In any case the population will generally always overestimate by including meshblocks that just nicked the place poly. Also there are a couple of dozen cases of overlapping meshblocks between two place polys and these will double count. Which i have so far made no attempt to fix.

Merged in also tla and regions from SNZ shapes, a few of the original linz atrributes, and lastly grading the size of urban areas according to SNZ 'urban areas" criteria. Ie: class codes:

1. Not used.
2. main urban area 30K+
3. secondary urban area 10k-30K
4. minor urban area 1k-10k
5. rural center 300-1K
6. village -300

Note that while this terminology is shared with SNZ the actual places differ owing to different decisions being made about where one area ends an another starts, and what constiutes a suburb or satellite. I expect some discussion around this issue. For example i have included tinwald and washdyke as part of ashburton and timaru, but not richmond or waikawa as part of nelson and picton. Im open to discussion on these.

No attempt has or will likely ever be made to locate the entire LOC and SBRB data subsets. We will just have to wait for NZFS to release what is thought to be an authoritative set.

PROJECTION

Shapefiles are all nztm. Orig data from SNZ and LINZ was all sourced in nztm, via koordinates, or SNZ. Satellite tracings were in spherical mercator/wgs84 and converted to nztm by Qgis. Zenbu POIS were also similarly converted.

ATTRIBUTES

Shapefile: Points id : integer unique to dataset name : name of popl place, string class : urban area size as above. integer tcode : SNZ tla code, integer rcode : SNZ region code, 1-16, integer area : area of poly place features, integer in square meters. pop : 2006 usually resident popluation, being the sum of meshblocks that intersect the place poly features. Integer lid : linz geog places id desc_code : linz geog places place type code

Shapefile: Polygons gid : integer unique to dataset, shared by points and polys name : name of popl place, string, where spelling conflicts occur points wins area : place poly area, m2 Integer

LICENSE

Clarification about the minorly derived nature of LINZ and google data needs to be sought. But pending these copyright complications, the actual points data is essentially an original work, released as public domain. I retain no copyright, nor any responsibility for data accuracy, either as is, or regardless of any changes that are subsequently made to it.

Peter Scott 16/6/2011

v1.01 minor spelling and grammar edits 17/6/11

Dataset contains life-cycle age group census usually resident population counts from the 2013, 2018, and 2023 Censuses, as well as the percentage change in the age group population counts between the 2013 and 2018 Censuses, and between the 2018 and 2023 Censuses. Data is available by regional council.

The life-cycle age groups are:

• under 15 years
• 15 to 29 years
• 30 to 64 years
• 65 years and over.

Map shows the percentage change in the census usually resident population count for life-cycle age groups between the 2018 and 2023 Censuses.

Download lookup file from Stats NZ ArcGIS Online or embedded attachment in Stats NZ geographic data service. Download data table (excluding the geometry column for CSV files) using the instructions in the Koordinates help guide.

​

Footnotes

Geographical boundaries

Statistical standard for geographic areas 2023 (updated December 2023) has information about geographic boundaries as of 1 January 2023. Address data from 2013 and 2018 Censuses was updated to be consistent with the 2023 areas. Due to the changes in area boundaries and coding methodologies, 2013 and 2018 counts published in 2023 may be slightly different to those published in 2013 or 2018.

​

Subnational census usually resident population

The census usually resident population count of an area (subnational count) is a count of all people who usually live in that area and were present in New Zealand on census night. It excludes visitors from overseas, visitors from elsewhere in New Zealand, and residents temporarily overseas on census night. For example, a person who usually lives in Christchurch city and is visiting Wellington city on census night will be included in the census usually resident population count of Christchurch city.

​

Caution using time series

Time series data should be interpreted with care due to changes in census methodology and differences in response rates between censuses. The 2023 and 2018 Censuses used a combined census methodology (using census responses and administrative data), while the 2013 Census used a full-field enumeration methodology (with no use of administrative data).

​

About the 2023 Census dataset

For information on the 2023 dataset see Using a combined census model for the 2023 Census. We combined data from the census forms with administrative data to create the 2023 Census dataset, which meets Stats NZ's quality criteria for population structure information. We added real data about real people to the dataset where we were confident the people who hadn’t completed a census form (which is known as admin enumeration) will be counted. We also used data from the 2018 and 2013 Censuses, administrative data sources, and statistical imputation methods to fill in some missing characteristics of people and dwellings.

​

Data quality

The quality of data in the 2023 Census is assessed using the quality rating scale and the quality assurance framework to determine whether data is fit for purpose and suitable for release. Data quality assurance in the 2023 Census has more information.

​

Quality rating of a variable

The quality rating of a variable provides an overall evaluation of data quality for that variable, usually at the highest levels of classification. The quality ratings shown are for the 2023 Census unless stated. There is variability in the quality of data at smaller geographies. Data quality may also vary between censuses, for subpopulations, or when cross tabulated with other variables or at lower levels of the classification. Data quality ratings for 2023 Census variables has more information on quality ratings by variable.

​

Age concept quality rating

Age is rated as very high quality.

Age – 2023 Census: Information by concept has more information, for example, definitions and data quality.

​

Using data for good

Stats NZ expects that, when working with census data, it is done so with a positive purpose, as outlined in the Māori Data Governance Model (Data Iwi Leaders Group, 2023). This model states that "data should support transformative outcomes and should uplift and strengthen our relationships with each other and with our environments. The avoidance of harm is the minimum expectation for data use. Māori data should also contribute to iwi and hapū tino rangatiratanga”.

​

Confidentiality

The 2023 Census confidentiality rules have been applied to 2013, 2018, and 2023 data. These rules protect the confidentiality of individuals, families, households, dwellings, and undertakings in 2023 Census data. Counts are calculated using fixed random rounding to base 3 (FRR3) and suppression of ‘sensitive’ counts less than six, where tables report multiple geographic variables and/or small populations. Individual figures may not always sum to stated totals. Applying confidentiality rules to 2023 Census data and summary of changes since 2018 and 2013 Censuses has more information about 2023 Census confidentiality rules.

Refer to the 'Current Geographic Boundaries Table' layer for a list of all current geographies and recent updates.

This dataset is the definitive version of the annually released statistical area 2 (SA2) boundaries as at 1 January 2025 as defined by Stats NZ. This version contains 2,395 SA2s (2,379 digitised and 16 with empty or null geometries (non-digitised)).

SA2 is an output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. The SA2 geography aims to reflect communities that interact together socially and economically. In populated areas, SA2s generally contain similar sized populations.

The SA2 should:

form a contiguous cluster of one or more SA1s,

excluding exceptions below, allow the release of multivariate statistics with minimal data suppression,

capture a similar type of area, such as a high-density urban area, farmland, wilderness area, and water area,

be socially homogeneous and capture a community of interest. It may have, for example:

• a shared road network,
• shared community facilities,
• shared historical or social links, or
• socio-economic similarity,

​

form a nested hierarchy with statistical output geographies and administrative boundaries. It must:

• be built from SA1s,
• either define or aggregate to define SA3s, urban areas, territorial authorities, and regional councils.

SA2s in city council areas generally have a population of 2,000–4,000 residents while SA2s in district council areas generally have a population of 1,000–3,000 residents.

In major urban areas, an SA2 or a group of SA2s often approximates a single suburb. In rural areas, rural settlements are included in their respective SA2 with the surrounding rural area.

SA2s in urban areas where there is significant business and industrial activity, for example ports, airports, industrial, commercial, and retail areas, often have fewer than 1,000 residents. These SA2s are useful for analysing business demographics, labour markets, and commuting patterns.

In rural areas, some SA2s have fewer than 1,000 residents because they are in conservation areas or contain sparse populations that cover a large area.

To minimise suppression of population data, small islands with zero or low populations close to the mainland, and marinas are generally included in their adjacent land-based SA2.

Zero or nominal population SA2s

To ensure that the SA2 geography covers all of New Zealand and aligns with New Zealand’s topography and local government boundaries, some SA2s have zero or nominal populations. These include:

• SA2s where territorial authority boundaries straddle regional council boundaries. These SA2s each have fewer than 200 residents and are: Arahiwi, Tiroa, Rangataiki, Kaimanawa, Taharua, Te More, Ngamatea, Whangamomona, and Mara.
• SA2s created for single islands or groups of islands that are some distance from the mainland or to separate large unpopulated islands from urban areas
• SA2s that represent inland water, inlets or oceanic areas including: inland lakes larger than 50 square kilometres, harbours larger than 40 square kilometres, major ports, other non-contiguous inlets and harbours defined by territorial authority, and contiguous oceanic areas defined by regional council.
• SA2s for non-digitised oceanic areas, offshore oil rigs, islands, and the Ross Dependency. Each SA2 is represented by a single meshblock. The following 16 SA2s are held in non-digitised form (SA2 code; SA2 name):

400001; New Zealand Economic Zone, 400002; Oceanic Kermadec Islands, 400003; Kermadec Islands, 400004; Oceanic Oil Rig Taranaki, 400005; Oceanic Campbell Island, 400006; Campbell Island, 400007; Oceanic Oil Rig Southland, 400008; Oceanic Auckland Islands, 400009; Auckland Islands, 400010 ; Oceanic Bounty Islands, 400011; Bounty Islands, 400012; Oceanic Snares Islands, 400013; Snares Islands, 400014; Oceanic Antipodes Islands, 400015; Antipodes Islands, 400016; Ross Dependency.

SA2 numbering and naming

Each SA2 is a single geographic entity with a name and a numeric code. The name refers to a geographic feature or a recognised place name or suburb. In some instances where place names are the same or very similar, the SA2s are differentiated by their territorial authority name, for example, Gladstone (Carterton District) and Gladstone (Invercargill City).

SA2 codes have six digits. North Island SA2 codes start with a 1 or 2, South Island SA2 codes start with a 3 and non-digitised SA2 codes start with a 4. They are numbered approximately north to south within their respective territorial authorities. To ensure the north–south code pattern is maintained, the SA2 codes were given 00 for the last two digits when the geography was created in 2018. When SA2 names or boundaries change only the last two digits of the code will change.

​

High-definition version

This high definition (HD) version is the most detailed geometry, suitable for use in GIS for geometric analysis operations and for the computation of areas, centroids and other metrics. The HD version is aligned to the LINZ cadastre.

​

Macrons

Names are provided with and without tohutō/macrons. The column name for those without macrons is suffixed ‘ascii’.

​

Digital data

Digital boundary data became freely available on 1 July 2007.

​

Further information

To download geographic classifications in table formats such as CSV please use Ariā

For more information please refer to the Statistical standard for geographic areas 2023.

Contact: geography@stats.govt.nz

Dataset shows an individual’s statistical area 3 (SA3) of usual residence and the SA3 of their workplace address, for the employed census usually resident population count aged 15 years and over, by main means of travel to work from the 2018 and 2023 Censuses.

​

The main means of travel to work categories are:

• Work at home
• Drive a private car, truck, or van
• Drive a company car, truck, or van
• Passenger in a car, truck, van, or company bus
• Public bus
• Train
• Bicycle
• Walk or jog
• Ferry
• Other.

​

Main means of travel to work is the usual method which an employed person aged 15 years and over used to travel the longest distance to their place of work.

​

Workplace address refers to where someone usually works in their main job, that is the job in which they worked the most hours. For people who work at home, this is the same address as their usual residence address. For people who do not work at home, this could be the address of the business they work for or another address, such as a building site.

​

Workplace address is coded to the most detailed geography possible from the available information. This dataset only includes travel to work information for individuals whose workplace address is available at SA3 level. The sum of the counts for each region in this dataset may not equal the total employed census usually resident population count aged 15 years and over for that region. Workplace address – 2023 Census: Information by concept has more information.

​

This dataset can be used in conjunction with the following spatial files by joining on the SA3 code values:

• Statistical area 3 2023 (generalised)

​

Download data table using the instructions in the Koordinates help guide.

​

Footnotes

​

Geographical boundaries

Statistical standard for geographic areas 2023 (updated December 2023) has information about geographic boundaries as of 1 January 2023. Address data from 2013 and 2018 Censuses was updated to be consistent with the 2023 areas. Due to the changes in area boundaries and coding methodologies, 2013 and 2018 counts published in 2023 may be slightly different to those published in 2013 or 2018.

​

Subnational census usually resident population

The census usually resident population count of an area (subnational count) is a count of all people who usually live in that area and were present in New Zealand on census night. It excludes visitors from overseas, visitors from elsewhere in New Zealand, and residents temporarily overseas on census night. For example, a person who usually lives in Christchurch city and is visiting Wellington city on census night will be included in the census usually resident population count of Christchurch city. 

​

Population counts

Stats NZ publishes a number of different population counts, each using a different definition and methodology. Population statistics – user guide has more information about different counts. 

​

Caution using time series

Time series data should be interpreted with care due to changes in census methodology and differences in response rates between censuses. The 2023 and 2018 Censuses used a combined census methodology (using census responses and administrative data).

​

Workplace address time series

Workplace address time series data should be interpreted with care at lower geographic levels, such as statistical area 2 (SA2). Methodological improvements in 2023 Census resulted in greater data accuracy, including a greater proportion of people being counted at lower geographic areas compared to the 2018 Census. Workplace address – 2023 Census: Information by concept has more information.

​

Working at home

In the census, working at home captures both remote work, and people whose business is at their home address (e.g. farmers or small business owners operating from their home). The census asks respondents whether they ‘mostly’ work at home or away from home. It does not capture whether someone does both, or how frequently they do one or the other.

​

Rows excluded from the dataset

Rows show SA3 of usual residence by SA3 of workplace address. Rows with a total population count of less than six have been removed to reduce the size of the dataset, given only a small proportion of SA3-SA3 combinations have commuter flows.

​

About the 2023 Census dataset

For information on the 2023 dataset see Using a combined census model for the 2023 Census. We combined data from the census forms with administrative data to create the 2023 Census dataset, which meets Stats NZ's quality criteria for population structure information. We added real data about real people to the dataset where we were confident the people who hadn’t completed a census form (which is known as admin enumeration) will be counted. We also used data from the 2018 and 2013 Censuses, administrative data sources, and statistical imputation methods to fill in some missing characteristics of people and dwellings.

​

Data quality

The quality of data in the 2023 Census is assessed using the quality rating scale and the quality assurance framework to determine whether data is fit for purpose and suitable for release. Data quality assurance in the 2023 Census has more information.

​

Quality rating of a variable

The quality rating of a variable provides an overall evaluation of data quality for that variable, usually at the highest levels of classification. The quality ratings shown are for the 2023 Census unless stated. There is variability in the quality of data at smaller geographies. Data quality may also vary between censuses, for subpopulations, or when cross tabulated with other variables or at lower levels of the classification. Data quality ratings for 2023 Census variables has more information on quality ratings by variable.

​

Main means of travel to work quality rating

Main means of travel to work is rated as moderate quality.

Main means of travel to work – 2023 Census: Information by concept has more information, for example, definitions and data quality.

​

Workplace address quality rating

Workplace address is rated as moderate quality.

Workplace address – 2023 Census: Information by concept has more information, for example, definitions and data quality.

​

Using data for good

Stats NZ expects that, when working with census data, it is done so with a positive purpose, as outlined in the Māori Data Governance Model (Data Iwi Leaders Group, 2023). This model states that "data should support transformative outcomes and should uplift and strengthen our relationships with each other and with our environments. The avoidance of harm is the minimum expectation for data use. Māori data should also contribute to iwi and hapū tino rangatiratanga”.

​

Confidentiality

The 2023 Census confidentiality rules have been applied to 2013, 2018, and 2023 data. These rules protect the confidentiality of individuals, families, households, dwellings, and undertakings in 2023 Census data. Counts are calculated using fixed random rounding to base 3 (FRR3) and suppression of ‘sensitive’ counts less than six, where tables report multiple geographic variables and/or small populations. Individual figures may not always sum to stated totals. Applying confidentiality rules to 2023 Census data and summary of changes since 2018 and 2013 Censuses has more information about 2023 Census confidentiality rules.

​

Percentages

To calculate percentages, divide the figure for the category of interest by the figure for ‘Total stated’ where this applies.

​

Symbol

-999 Confidential

​

Inconsistencies in definitions

Please note that there may be differences in definitions between census classifications and those used for other data collections.

Dataset contains counts and measures for individuals from the 2013, 2018, and 2023 Censuses. Data is available by statistical area 2.

​

The variables included in this dataset are for the census usually resident population count (unless otherwise stated). All data is for level 1 of the classification.

​

The variables for part 2 of the dataset are:

• Individual home ownership for the census usually resident population count aged 15 years and over
• Usual residence 1 year ago indicator
• Usual residence 5 years ago indicator
• Years at usual residence
• Average years at usual residence
• Years since arrival in New Zealand for the overseas-born census usually resident population count
• Average years since arrival in New Zealand for the overseas-born census usually resident population count
• Study participation
• Main means of travel to education, by usual residence address for the census usually resident population who are studying
• Main means of travel to education, by education address for the census usually resident population who are studying
• Highest qualification for the census usually resident population count aged 15 years and over
• Post-school qualification in New Zealand indicator for the census usually resident population count aged 15 years and over
• Highest secondary school qualification for the census usually resident population count aged 15 years and over
• Post-school qualification level of attainment for the census usually resident population count aged 15 years and over
• Sources of personal income (total responses) for the census usually resident population count aged 15 years and over
• Total personal income for the census usually resident population count aged 15 years and over
• Median ($) total personal income for the census usually resident population count aged 15 years and over
• Work and labour force status for the census usually resident population count aged 15 years and over
• Job search methods (total responses) for the unemployed census usually resident population count aged 15 years and over
• Status in employment for the employed census usually resident population count aged 15 years and over
• Unpaid activities (total responses) for the census usually resident population count aged 15 years and over
• Hours worked in employment per week for the employed census usually resident population count aged 15 years and over
• Average hours worked in employment per week for the employed census usually resident population count aged 15 years and over
• Industry, by usual residence address for the employed census usually resident population count aged 15 years and over
• Industry, by workplace address for the employed census usually resident population count aged 15 years and over
• Occupation, by usual residence address for the employed census usually resident population count aged 15 years and over
• Occupation, by workplace address for the employed census usually resident population count aged 15 years and over
• Main means of travel to work, by usual residence address for the employed census usually resident population count aged 15 years and over
• Main means of travel to work, by workplace address for the employed census usually resident population count aged 15 years and over
• Sector of ownership for the employed census usually resident population count aged 15 years and over
• Individual unit data source.

​

Download lookup file from Stats NZ ArcGIS Online or embedded attachment in Stats NZ geographic data service. Download data table (excluding the geometry column for CSV files) using the instructions in the Koordinates help guide.

​

Footnotes

Te Whata

Under the Mana Ōrite Relationship Agreement, Te Kāhui Raraunga (TKR) will be publishing Māori descent and iwi affiliation data from the 2023 Census in partnership with Stats NZ. This will be available on Te Whata, a TKR platform.

​

Geographical boundaries

Statistical standard for geographic areas 2023 (updated December 2023) has information about geographic boundaries as of 1 January 2023. Address data from 2013 and 2018 Censuses was updated to be consistent with the 2023 areas. Due to the changes in area boundaries and coding methodologies, 2013 and 2018 counts published in 2023 may be slightly different to those published in 2013 or 2018.

​

Subnational census usually resident population

The census usually resident population count of an area (subnational count) is a count of all people who usually live in that area and were present in New Zealand on census night. It excludes visitors from overseas, visitors from elsewhere in New Zealand, and residents temporarily overseas on census night. For example, a person who usually lives in Christchurch city and is visiting Wellington city on census night will be included in the census usually resident population count of Christchurch city.

​

Population counts

Stats NZ publishes a number of different population counts, each using a different definition and methodology. Population statistics – user guide has more information about different counts.

​

Caution using time series

Time series data should be interpreted with care due to changes in census methodology and differences in response rates between censuses. The 2023 and 2018 Censuses used a combined census methodology (using census responses and administrative data), while the 2013 Census used a full-field enumeration methodology (with no use of administrative data).

​

Study participation time series

In the 2013 Census study participation was only collected for the census usually resident population count aged 15 years and over.

​

About the 2023 Census dataset

For information on the 2023 dataset see Using a combined census model for the 2023 Census. We combined data from the census forms with administrative data to create the 2023 Census dataset, which meets Stats NZ's quality criteria for population structure information. We added real data about real people to the dataset where we were confident the people who hadn’t completed a census form (which is known as admin enumeration) will be counted. We also used data from the 2018 and 2013 Censuses, administrative data sources, and statistical imputation methods to fill in some missing characteristics of people and dwellings.

​

Data quality

The quality of data in the 2023 Census is assessed using the quality rating scale and the quality assurance framework to determine whether data is fit for purpose and suitable for release. Data quality assurance in the 2023 Census has more information.

​

Concept descriptions and quality ratings

Data quality ratings for 2023 Census variables has additional details about variables found within totals by topic, for example, definitions and data quality.

​

Disability indicator

This data should not be used as an official measure of disability prevalence. Disability prevalence estimates are only available from the 2023 Household Disability Survey. Household Disability Survey 2023: Final content has more information about the survey.

Activity limitations are measured using the Washington Group Short Set (WGSS). The WGSS asks about six basic activities that a person might have difficulty with: seeing, hearing, walking or climbing stairs, remembering or concentrating, washing all over or dressing, and communicating. A person was classified as disabled in the 2023 Census if there was at least one of these activities that they had a lot of difficulty with or could not do at all.

​

Using data for good

Stats NZ expects that, when working with census data, it is done so with a positive purpose, as outlined in the Māori Data Governance Model (Data Iwi Leaders Group, 2023). This model states that "data should support transformative outcomes and should uplift and strengthen our relationships with each other and with our environments. The avoidance of harm is the minimum expectation for data use. Māori data should also contribute to iwi and hapū tino rangatiratanga”.

​

Confidentiality

The 2023 Census confidentiality rules have been applied to 2013, 2018, and 2023 data. These rules protect the confidentiality of individuals, families, households, dwellings, and undertakings in 2023 Census data. Counts are calculated using fixed random rounding to base 3 (FRR3) and suppression of ‘sensitive’ counts less than six, where tables report multiple geographic variables and/or small populations. Individual figures may not always sum to stated totals. Applying confidentiality rules to 2023 Census data and summary of changes since 2018 and 2013 Censuses has more information about 2023 Census confidentiality rules.

​

Measures

Measures like averages, medians, and other quantiles are calculated from unrounded counts, with input noise added to or subtracted from each contributing value during measures

Dataset contains life-cycle age group census usually resident population counts from the 2013, 2018, and 2023 Censuses, as well as the percentage change in the age group population counts between the 2013 and 2018 Censuses, and between the 2018 and 2023 Censuses. Data is available by statistical area 2 (SA2).

The life-cycle age groups are:

• under 15 years
• 15 to 29 years
• 30 to 64 years
• 65 years and over.

Map shows the percentage change in the census usually resident population count for life-cycle age groups between the 2018 and 2023 Censuses.

Download lookup file from Stats NZ ArcGIS Online or embedded attachment in Stats NZ geographic data service. Download data table (excluding the geometry column for CSV files) using the instructions in the Koordinates help guide.

​

Footnotes

Geographical boundaries

Statistical standard for geographic areas 2023 (updated December 2023) has information about geographic boundaries as of 1 January 2023. Address data from 2013 and 2018 Censuses was updated to be consistent with the 2023 areas. Due to the changes in area boundaries and coding methodologies, 2013 and 2018 counts published in 2023 may be slightly different to those published in 2013 or 2018.

​

Subnational census usually resident population

The census usually resident population count of an area (subnational count) is a count of all people who usually live in that area and were present in New Zealand on census night. It excludes visitors from overseas, visitors from elsewhere in New Zealand, and residents temporarily overseas on census night. For example, a person who usually lives in Christchurch city and is visiting Wellington city on census night will be included in the census usually resident population count of Christchurch city. 

​

Caution using time series

Time series data should be interpreted with care due to changes in census methodology and differences in response rates between censuses. The 2023 and 2018 Censuses used a combined census methodology (using census responses and administrative data), while the 2013 Census used a full-field enumeration methodology (with no use of administrative data).

​

About the 2023 Census dataset

For information on the 2023 dataset see Using a combined census model for the 2023 Census. We combined data from the census forms with administrative data to create the 2023 Census dataset, which meets Stats NZ's quality criteria for population structure information. We added real data about real people to the dataset where we were confident the people who hadn’t completed a census form (which is known as admin enumeration) will be counted. We also used data from the 2018 and 2013 Censuses, administrative data sources, and statistical imputation methods to fill in some missing characteristics of people and dwellings.

​

Data quality

The quality of data in the 2023 Census is assessed using the quality rating scale and the quality assurance framework to determine whether data is fit for purpose and suitable for release. Data quality assurance in the 2023 Census has more information.

​

Quality rating of a variable

The quality rating of a variable provides an overall evaluation of data quality for that variable, usually at the highest levels of classification. The quality ratings shown are for the 2023 Census unless stated. There is variability in the quality of data at smaller geographies. Data quality may also vary between censuses, for subpopulations, or when cross tabulated with other variables or at lower levels of the classification. Data quality ratings for 2023 Census variables has more information on quality ratings by variable.

​

Age concept quality rating

Age is rated as very high quality.

Age – 2023 Census: Information by concept has more information, for example, definitions and data quality.

​

Using data for good

Stats NZ expects that, when working with census data, it is done so with a positive purpose, as outlined in the Māori Data Governance Model (Data Iwi Leaders Group, 2023). This model states that "data should support transformative outcomes and should uplift and strengthen our relationships with each other and with our environments. The avoidance of harm is the minimum expectation for data use. Māori data should also contribute to iwi and hapū tino rangatiratanga”.

​

Confidentiality

The 2023 Census confidentiality rules have been applied to 2013, 2018, and 2023 data. These rules protect the confidentiality of individuals, families, households, dwellings, and undertakings in 2023 Census data. Counts are calculated using fixed random rounding to base 3 (FRR3) and suppression of ‘sensitive’ counts less than six, where tables report multiple geographic variables and/or small populations. Individual figures may not always sum to stated totals. Applying confidentiality rules to 2023 Census data and summary of changes since 2018 and 2013 Censuses has more information about 2023 Census confidentiality rules.

​

Symbol

-998 Not applicable

-999 Confidential

​

​

About this dataset

Context

This list ranks the 1 cities in the Big Horn County, MT by New Zealander population, as estimated by the United States Census Bureau. It also highlights population changes in each city over the past five years.

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 5-Year Estimates, including:

• 2019-2023 American Community Survey 5-Year Estimates
• 2014-2018 American Community Survey 5-Year Estimates
• 2009-2013 American Community Survey 5-Year Estimates

Variables / Data Columns

• Rank by New Zealander Population: This column displays the rank of city in the Big Horn County, MT by their New Zealander population, using the most recent ACS data available.
• City: The City for which the rank is shown in the previous column.
• New Zealander Population: The New Zealander population of the city is shown in this column.
• % of Total City Population: This shows what percentage of the total city population identifies as New Zealander. Please note that the sum of all percentages may not equal one due to rounding of values.
• % of Total Big Horn County New Zealander Population: This tells us how much of the entire Big Horn County, MT New Zealander population lives in that city. Please note that the sum of all percentages may not equal one due to rounding of values.
• 5 Year Rank Trend: This column displays the rank trend across the last 5 years.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

The price of residential property in New Zealand was the highest in the Auckland region in October 2025, with an average sale price of over *** million New Zealand dollars. The most populated city in the country, Auckland, has consistently reported higher house prices compared to most other regions. Buying property in New Zealand, particularly in its major cities, is expensive. The nation has one of the highest house-price-to-income ratios in the world. Auckland residential market The residential housing market in Auckland is competitive. Prices have been slowly decreasing although the Auckland region experienced an annual increase in the average residential house price in October 2025 compared to the same month in the previous year. The price of residential property in Auckland was the highest in the Auckland City district, with an average sale price of around **** million New Zealand dollars. Home financing Due to the rising cost of real estate, an increasing number of New Zealanders who want to own their own property are taking on mortgages. Most residential mortgage lending in New Zealand went to owner-occupier borrowers, followed by first home buyers. In addition to mortgage lending, previously under the KiwiSaver HomeStart initiative, first-home buyers in New Zealand were able to apply to withdraw all or part of their KiwiSaver retirement savings to assist with purchasing a first home. Nonetheless, the scheme was discontinued in May 2024. Furthermore, even with a large initial deposit, it may take decades for many borrowers to pay off their mortgage.

A large body of water entirely surrounded by land.

S-57 Object Class: Lake

S-57 Acronym: LAKARE

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: http://www.linz.govt.nz/hydro/regulation/

Last updatedNovember 2025ProjectionNew Zealand Transverse Mercator 2000 (NZTM2000).This vector tile layer provides a detailed basemap for New Zealand in the NZ Transverse Mercator projection. The style is based on the classic Esri World Navigation style. This vector tile layer provides unique capabilities for customization and high-resolution display.This map includes highways, major roads, minor roads, railways, water features, cities, parks, landmarks, building footprints, and administrative boundaries for added context.Data sourcesLand Information New ZealandBuildings, Parcels, Place Names, Water-bodies, Vegetation, Protected Areas, Airports, Railways & Islands.Statistics New ZealandAdministrative Boundaries & Urban AreasNational Institute of Water & Atmospheric Research (NIWA)River Environment Classification© OpenStreetMap ContributorsRoad Centrelines, Buildings, Landuse Types, Areas of Interest and Points of Interest.Natural EarthBathymetry & Marine LabelsThis map is offered by Eagle Technology (Official Esri Distributor). Eagle Technology offers layers and maps that can be used in the ArcGIS platform. The Content team at Eagle Technology updates the layers on a regular basis and regularly adds new content to the Living Atlas. By using this content and combining it with other data you can create new information products quickly and easily.If you have any questions or remarks about the content, please let us now at livingatlas@eagle.co.nzCustomize this MapBecause this map is delivered as a vector tile layer, users can customize the map to change its content and symbology, including fonts. Users are able to turn on and off layers and change symbols for layers.An easy way to change the style of this map is to use the Vector Basemap Style Editor:https://developers.arcgis.com/vector-tile-style-editor/

Statistical Area 2 2023 update

SA2 2023 is the first major update of the geography since it was first created in 2018. The update is to ensure SA2s are relevant and meet criteria before each five-yearly population and dwelling census. SA2 2023 contains 135 new SA2s. Updates were made to reflect real world change ofpopulation and dwelling growthmainly in urban areas, and to make some improvements to their delineation of communities of interest.

​

Description

This dataset is the definitive version of the annually released statistical area 2 (SA2) boundaries as at 1 January 2023 as defined by Stats NZ (the custodian), clipped to the coastline. This clipped version has been created for cartographic purposes and so does not fully represent the official full extent boundaries. This clipped version contains 2,311 SA2 areas.

SA2 is an output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. The SA2 geography aims to reflect communities that interact together socially and economically. In populated areas, SA2s generally contain similar sized populations.

​

The SA2 should:

form a contiguous cluster of one or more SA1s,

excluding exceptions below, allow the release of multivariate statistics with minimal data suppression,

capture a similar type of area, such as a high-density urban area, farmland, wilderness area, and water area,

be socially homogeneous and capture a community of interest. It may have, for example:

· a shared road network,

· shared community facilities,

· shared historical or social links, or

· socio-economic similarity,

form a nested hierarchy with statistical output geographies and administrative boundaries. It must:

· be built from SA1s,

· either define or aggregate to define SA3s, urban areas, territorial authorities, and regional councils.

SA2s in city council areas generally have a population of 2,000–4,000 residents while SA2s in district council areas generally have a population of 1,000–3,000 residents.

In major urban areas, an SA2 or a group of SA2s often approximates a single suburb. In rural areas, rural settlements are included in their respective SA2 with the surrounding rural area.

SA2s in urban areas where there is significant business and industrial activity, for example ports, airports, industrial, commercial, and retail areas, often have fewer than 1,000 residents. These SA2s are useful for analysing business demographics, labour markets, and commuting patterns.

In rural areas, some SA2s have fewer than 1,000 residents because they are in conservation areas or contain sparse populations that cover a large area.

To minimise suppression of population data, small islands with zero or low populations close to the mainland, and marinas are generally included in their adjacent land-based SA2.

​

Zero or nominal population SA2s

To ensure that the SA2 geography covers all of New Zealand and aligns with New Zealand’s topography and local government boundaries, some SA2s have zero or nominal populations. These include:

· SA2s where territorial authority boundaries straddle regional council boundaries. These SA2s each have fewer than 200 residents and are: Arahiwi, Tiroa, Rangataiki, Kaimanawa, Taharua, Te More, Ngamatea, Whangamomona, and Mara.

· SA2s created for single islands or groups of islands that are some distance from the mainland or to separate large unpopulated islands from urban areas

· SA2s that represent inland water, inlets or oceanic areas including: inland lakes larger than 50 square kilometres, harbours larger than 40 square kilometres, major ports, other non-contiguous inlets and harbours defined by territorial authority, and contiguous oceanic areas defined by regional council.

· SA2s for non-digitised oceanic areas, offshore oil rigs, islands, and the Ross Dependency. Each SA2 is represented by a single meshblock. The following 16 SA2s are held in non-digitised form (SA2 code; SA2 name):

400001; New Zealand Economic Zone, 400002; Oceanic Kermadec Islands, 400003; Kermadec Islands, 400004; Oceanic Oil Rig Taranaki, 400005; Oceanic Campbell Island, 400006; Campbell Island, 400007; Oceanic Oil Rig Southland, 400008; Oceanic Auckland Islands, 400009; Auckland Islands, 400010 ; Oceanic Bounty Islands, 400011; Bounty Islands, 400012; Oceanic Snares Islands, 400013; Snares Islands, 400014; Oceanic Antipodes Islands, 400015; Antipodes Islands, 400016; Ross Dependency.

​

SA2 numbering and naming

Each SA2 is a single geographic entity with a name and a numeric code. The name refers to a geographic feature or a recognised place name or suburb. In some instances where place names are the same or very similar, the SA2s are differentiated by their territorial authority name, for example, Gladstone (Carterton District) and Gladstone (Invercargill City).

SA2 codes have six digits. North Island SA2 codes start with a 1 or 2, South Island SA2 codes start with a 3 and non-digitised SA2 codes start with a 4. They are numbered approximately north to south within their respective territorial authorities. To ensure the north–south code pattern is maintained, the SA2 codes were given 00 for the last two digits when the geography was created in 2018. When SA2 names or boundaries change only the last two digits of the code will change.

​

For more information please refer to the Statistical standard for geographic areas 2023.

​

Macrons

Names are provided with and without tohutō/macrons. The column name for those without macrons is suffixed ‘ascii’.

Digital data

Digital boundary data became freely available on 1 July 2007.

​

To download geographic classifications in table formats such as CSV please use Ariā