The profile polyline feature class was created based upon the separate NJ State Flood Study’s mostly 11x17 inch profiles. The feature class segments approximate the extent of each 11x17 inch profile. The NJ State Flood Study combined plans and profiles were intentionally not captured in this feature class.

description: The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the State Plane Coordinate System. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.; abstract: The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the State Plane Coordinate System. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.

The Flood Risk Notice and property condition disclosure form requires you to disclose if the property is in the Special Flood Hazard Area (100-year or 1% annual chance floodplain) or the Moderate Flood Hazard Area (500-year or 1% annual chance floodplain). You will need to disclose all FEMA Flood Zones that overlap your property. There may be more than one, or there may be none. This includes any flood zones mapped according to preliminary maps. FEMA periodically re-assesses a community’s flood risk using updated data and modeling and mapping technology. These updated models are published as preliminary maps until they are made effective following a public comment or appeal period.

The absence of flood indicators does not mean that a property is free from flood risk. Flooding can occur anywhere. The geographic extent of flood-prone areas can change due to local factors including increases in impervious surface; changes to stream flow; natural impediments; or aging, poorly maintained, or failing infrastructure. The size and extent of flood prone areas are also expanding due to climate change-related impacts like increasing rainfall intensities and sea-level rise.This tool does not provide information regarding the applicability of any NJDEP regulations. The absence of flood indicators does not mean that a property is free from flood risk. Flooding can occur anywhere. The geographic extent of flood-prone areas can change due to local factors including increases in impervious surface; changes to stream flow; natural impediments; or aging, poorly maintained, or failing infrastructure. The size and extent of flood-prone areas are expanding due to climate change-related impacts like increasing rainfall intensities and sea-level rise.

The Floodplain Mapping/Redelineation study deliverables depict and quantify the flood risks for the study area. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The Floodplain Mapping/Redelineation flood risk boundaries are derived from the engineering information Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA).

Digital flood-inundation maps for coastal communities within Atlantic County in New Jersey were created by water surfaces generated by an Advanced Circulation hydrodynamic (ADCIRC) and Simulating Waves Nearshore (SWAN) model from the Federal Emergency Management Agency (FEMA) Region II coastal analysis and mapping study (Federal Emergency Management Agency, 2014). Six synthetic modeled tropical storm events from a library of 159 events were selected based on parameters including landfall location or closest approach location, maximum wind speed, central pressure, and radii of winds. Two storm events were selected for the tide gage providing two "scenarios" and accompanying inundation-map libraries. The contents of this data release support the following publication: Suro, T.P., Niemoczynski, M.J., Boetsma, A.C., and Niemoczynski, L.M., 2023, Moderate flood level scenarios: synthetic storm-driven flood-inundation maps for coastal communities in 10 New Jersey counties: U.S. Geological Survey Scientific Investigations Report 2023-5005, 64 p., https://doi.org/10.3133/sir20235005. The landing page on which this and 24 other storm scenarios reside is: Niemoczynski, L.M., Niemoczynski, M.J., Boetsma, A.C., and Suro, T.P., 2023, Synthetic storm-driven flood-inundation grids for coastal communities in 10 New Jersey counties: U.S Geological Survey data release, https://doi.org/10.5066/P9RVF9P8. References cited: Federal Emergency Management Agency, 2014, FEMA Region II Coastal Analysis and Mapping Study, accessed November 2, 2018, at http://www.region2coastal.com/resources/about-the-coastal-flood-study/

The Floodplain Mapping/Redelineation study deliverables depict and quantify the flood risks for the study area. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The Floodplain Mapping/Redelineation flood risk boundaries are derived from the engineering information Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA).

Digital flood-inundation maps for an approximate 7.5-mile reach of the Peckman River in New Jersey, which extends from Verona Lake Dam in the Township of Verona downstream through the Township of Cedar Grove and the Township of Little Falls to the confluence with the Passaic River in the Borough of Woodland Park, were created by the U.S. Geological Survey (USGS) in cooperation with the New Jersey Department of Environmental Protection. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ depict estimates of the probable areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the Peckman River at Ozone Avenue at Verona, New Jersey (station number 01389534). Near-real-time stages at this streamgage may be obtained on the Internet from the USGS National Water Information System at http://waterdata.usgs.gov/. Flood profiles were simulated for the stream reach by means of a one-dimensional step-backwater model. The model was calibrated using the most current stage-discharge relations at USGS streamgages on the Peckman River at Ozone Avenue at erona, New Jersey (station number 01389534) and the Peckman River at Little Falls, New Jersey, station number 01389550. The hydraulic model was then used to compute eight water-surface profiles for flood stages at 0.5-foot (ft) intervals ranging from 3.0 ft or near bankfull to 6.5 ft, which is approximately the highest recorded water level during the period of record (1979–2014) at USGS streamgage 01389534, Peckman River at Ozone Avenue at Verona, New Jersey. The simulated water-surface profiles were then combined with a geographic information system digital elevation model derived from light detection and ranging (lidar) data to delineate the area flooded at each water level. The availability of these maps along with Internet information regarding current stage from the USGS streamgage provides emergency management personnel and residents with information, such as estimates of inundation extents, based on water stage, that is critical for flood response activities such as evacuations and road closures, as well as for post-flood recovery efforts.

As part of the Framework, the extent of coastal flood hazard was completed by using readily availableSea, Lake, and Overland Surge from Hurricanes (SLOSH) modeling conductedby NOAA. SLOSH modeling of hurricane intensities is categorized by the Saffir-Simpson hurricane wind scale and includes other characteristics of hurricanes that can vary considerably along the coast, such as angle of approach to the shoreline, width and slope of the continental shelf, astronomical high tide level, and local geographic features (FEMA 2011). The SLOSH model outputs inform hurricane evacuation studies. The inundation zones identified by the SLOSH model depict areas of possible flooding from the maximum of maximum (MOM) event within the five categories of hurricanes by estimating the potential surge inundation during a high-tide landfall. Although the SLOSH inundation mapping is not referenced to a specific probability of occurrence (unlike FEMA flood mapping, which presents the 0.2-percent- and 1-percent-annual-chance flood elevation zones) nor does it include wave heights, the flooding inundation from a Category 4 hurricane making landfall during high tide represents an extremely lowprobability of occurrence but high-magnitude event.The intent of the NACCS is to generate a spatially comprehensive, but first-order approximation of flooding vulnerability across the entire northeastern Atlantic coastal region. The use of the SLOSH model MOM was necessary based on the very large spatial extent of the study area and the fact that it is currently the most advanced storm surge modeling available for the entire study area. The extent of the Category 4 MOM represents the maximum storm tide levels caused by extreme hurricane scenarios across the region, and, therefore, provides a reasonable approximation of the most extreme flooding extent. The State and District of Columbia Appendix presents the SLOSH hydrodynamic modeling inundation mapping associated with Categories 1 through 4 hurricanes used for evacuation modeling.

© NOAA, US Army Corps of Engineers, Monmouth County Division of Planning - GIS, Monmouth County Sheriff's Office - Office of Emergency Management

Digital flood-inundation maps for coastal communities within Cape May County in New Jersey were created by water surfaces generated by an Advanced Circulation hydrodynamic (ADCIRC) and Simulating Waves Nearshore (SWAN) model from the Federal Emergency Management Agency (FEMA) Region II coastal analysis and mapping study (Federal Emergency Management Agency, 2014). Six synthetic modeled tropical storm events from a library of 159 events were selected based on parameters including landfall location or closest approach location, maximum wind speed, central pressure, and radii of winds. Two storm events were selected for the tide gage providing two "scenarios" and accompanying inundation-map libraries. The contents of this data release support the following publication: Suro, T.P., Niemoczynski, M.J., Boetsma, A.C., and Niemoczynski, L.M., 2023, Moderate flood level scenarios: synthetic storm-driven flood-inundation maps for coastal communities in 10 New Jersey counties: U.S. Geological Survey Scientific Investigations Report 2023-5005, 64 p., https://doi.org/10.3133/sir20235005. The landing page on which this and 24 other storm scenarios reside is: Niemoczynski, L.M., Niemoczynski, M.J., Boetsma, A.C., and Suro, T.P., 2023, Synthetic storm-driven flood-inundation grids for coastal communities in 10 New Jersey counties: U.S Geological Survey data release, https://doi.org/10.5066/P9RVF9P8. References cited: Federal Emergency Management Agency, 2014, FEMA Region II Coastal Analysis and Mapping Study, accessed November 2, 2018, at http://www.region2coastal.com/resources/about-the-coastal-flood-study/

This FEMA layer is used by NJDEP in an ArcGIS Online web mapping application. The National Flood Hazard Layer (NFHL) data incorporates all Flood Insurance Rate Map (FIRM) databases published by the Federal Emergency Management Agency (FEMA), and any Letters of Map Revision (LOMRs) that have been issued against those databases since their publication date. It is updated on a monthly basis. The FIRM Database is the digital, geospatial version of the flood hazard information shown on the published paper FIRMs. The FIRM Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The FIRM Database is derived from Flood Insurance Studies (FISs), previously published FIRMs, flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by FEMA. The NFHL is available as State or US Territory data sets. Each State or Territory data set consists of all FIRM Databases and corresponding LOMRs available on the publication date of the data set. The specification for the horizontal control of FIRM Databases is consistent with those required for mapping at a scale of 1:12,000. This file is georeferenced to the Earth's surface using the Geographic Coordinate System (GCS) and North American Datum of 1983.

Digital flood-inundation maps for coastal communities within Ocean County in New Jersey were created by water surfaces generated by an Advanced Circulation hydrodynamic (ADCIRC) and Simulating Waves Nearshore (SWAN) model from the Federal Emergency Management Agency (FEMA) Region II coastal analysis and mapping study (Federal Emergency Management Agency, 2014). Six synthetic modeled tropical storm events from a library of 159 events were selected based on parameters including landfall location or closest approach location, maximum wind speed, central pressure, and radii of winds. Two storm events were selected for the tide gage providing two "scenarios" and accompanying inundation-map libraries. The contents of this data release support the following publication: Suro, T.P., Niemoczynski, M.J., Boetsma, A.C., and Niemoczynski, L.M., 2023, Moderate flood level scenarios: synthetic storm-driven flood-inundation maps for coastal communities in 10 New Jersey counties: U.S. Geological Survey Scientific Investigations Report 2023-5005, 64 p., https://doi.org/10.3133/sir20235005. The landing page on which this and 24 other storm scenarios reside is: Niemoczynski, L.M., Niemoczynski, M.J., Boetsma, A.C., and Suro, T.P., 2023, Synthetic storm-driven flood-inundation grids for coastal communities in 10 New Jersey counties: U.S Geological Survey data release, https://doi.org/10.5066/P9RVF9P8. References cited: Federal Emergency Management Agency, 2014, FEMA Region II Coastal Analysis and Mapping Study, accessed November 2, 2018, at http://www.region2coastal.com/resources/about-the-coastal-flood-study/

Estimation of Future Percent Flooding within Urban Areas per Census Block Group for the New Jersey Environmental Justice Mapping Tool. Estimates represents a potential scenario of urban flood conditions due to climate change projections (2020 New Jersey Scientific Report on Climate Change, Chapter 4.3 Sea – Level Rise). This layer was developed by combining 1) Tidal Climate Adjusted Flood Elevation for New Jersey (approximate delineation of additional 5 foot flood water height added to the FEMA coastal Special Flood Hazard Area 12/01/2013 to 12/31/2016) with 2) the inland FEMA Statewide Combined Flood Hazard Maps (1% (100-Year)/ 0.2% (500-Year) Flood Hazard Areas 2019). This Statewide Future Flood Hazard Areas were than clipped to Urban Areas (2015) with Census Block Group (2019) ID attribute added.

The National Flood Hazard Layer (NFHL) is a geospatial database that contains current effective flood hazard data. FEMA provides the flood hazard data to support the National Flood Insurance Program. This dataset is the NFHL layer clipped to Manville Borough’s boundaries.

Digital flood-inundation maps for an approximately 295-mile length of the New Jersey coastline and tidewaters through 10-coastal counties stretching from Cumberland County through Bergen County; including Cumberland, Cape May, Atlantic, Ocean, Monmouth, Middlesex, Union, Essex, Hudson, and Bergen counties were created by the U.S Geological Survey (USGS) in cooperation with the New Jersey Department of Environmental Protection (NJDEP) and New Jersey Office of Emergency Management (NJOEM). The flood-inundation maps depict extent and depth estimates of coastal flooding corresponding to selected tidal elevations recorded by 25 real-time USGS tide gages located throughout the length of the study area coastline. The flood-inundation maps can be accessed through the U.S Geological Survey Flood Decision Support Toolbox (FDST) Web site (U.S. Geological Survey, 2022). The contents of this data release support the following publication: Suro, T.P., Niemoczynski, M.J., Boetsma, A.C., and Niemoczynski, L.M., 2023, Moderate flood level scenarios: synthetic storm-driven flood-inundation maps for coastal communities in 10 New Jersey counties: U.S. Geological Survey Scientific Investigations Report 2023-5005, 64 p., https://doi.org/10.3133/sir20235005. Reference cited: U.S. Geological Survey, 2022, InFRM Flood Decision Support Toolbox: U.S. Geological Survey Interagency Flood Risk Management web interface: accessed Jan 4, 2022 at http://webapps.usgs.gov/infrm/fdst.

Digital flood-inundation maps for coastal communities within Essex, Hudson, and Union Counties in New Jersey were created by water surfaces generated by an Advanced Circulation hydrodynamic (ADCIRC) and Simulating Waves Nearshore (SWAN) model from the Federal Emergency Management Agency (FEMA) Region II coastal analysis and mapping study (Federal Emergency Management Agency, 2014). Six synthetic modeled tropical storm events from a library of 159 events were selected based on parameters including landfall _location or closest approach _location, maximum wind speed, central pressure, and radii of winds. Two storm events were selected for the tide gage providing two "scenarios" and accompanying inundation-map libraries. The contents of this data release support the following publication: Suro, T.P., Niemoczynski, M.J., Boetsma, A.C., and Niemoczynski, L.M., 2023, Moderate flood level scenarios: synthetic storm-driven flood-inundation maps for coastal communities in 10 New Jersey counties: U.S. Geological Survey Scientific Investigations Report 2023-5005, 64 p., https://doi.org/10.3133/sir20235005. The landing page on which this and 24 other storm scenarios reside is: Niemoczynski, L.M., Niemoczynski, M.J., Boetsma, A.C., and Suro, T.P., 2023, Synthetic storm-driven flood-inundation grids for coastal communities in 10 New Jersey counties: U.S Geological Survey data release, https://doi.org/10.5066/P9RVF9P8. References cited: Federal Emergency Management Agency, 2014, FEMA Region II Coastal Analysis and Mapping Study, accessed November 2, 2018, at http://www.region2coastal.com/resources/about-the-coastal-flood-study/

A FEMA housing inspection for renters is used to assess personal property loss and for owners to assess damage to their home as well as personal property. This inspection is done to determine eligibility for FEMA Individual Assistance. For both rental and owner inspections, if the property has flood damage the inspector measures the height of the flooding. They indicate the highest floor of the flooding (for example, Basement, 1st floor, 2nd floor, etc…) and the extent of the flooding in that room. In addition, for the units without flooding, HUD has estimated minor/major/severe damage based on the damage inspection estimates for real property (owner) and personal property (renter).In an effort to maintain the confidentiality of residents this file only presents data on block groups with ten or more damaged housing units. The suppression of block groups with fewer than ten damaged housing units results in an exclusion of approximately 6% of the total flooded units. These data reflect Hurricane Sandy damage in the states of New York, New Jersey, Connecticut, and Rhode Island. These data are incomplete, as each day there are additional registrants and inspections. This should be a viewed as a preliminary snapshot to assist with planning.To learn more about HUD's long-term recovery efforts for victims of Hurricane Sandy visit: https://www.hud.gov/sandyrebuilding, for questions about the spatial attribution of this dataset, please reach out to us at GISHelpdesk@hud.gov.

This EnviroAtlas dataset describes the total counts and percentage of population, land area, and impervious surface in the 1% Annual Chance Flood Hazard area or 0.2% Annual Chance Flood Hazard area of each block group. The flood hazard area is defined by the National Flood Hazard Layer (NFHL) produced by the Federal Emergency Management Agency (FEMA, www.fema.gov). This dataset was produced by the US EPA to support research and online mapping activities related to EnviroAtlas. EnviroAtlas (https://www.epa.gov/enviroatlas) allows the user to interact with a web-based, easy-to-use, mapping application to view and analyze multiple ecosystem services for the contiguous United States. The dataset is available as downloadable data (https://edg.epa.gov/data/Public/ORD/EnviroAtlas) or as an EnviroAtlas map service. Additional descriptive information about each attribute in this dataset can be found in its associated EnviroAtlas Fact Sheet (https://www.epa.gov/enviroatlas/enviroatlas-fact-sheets).

This dataset provides a shapefile showing the natural floodplain for New Jersey. These floodplain polygons for the entire state are extracted from the gSSURGO soil data from the Natural Resources Conservation Service (NRCS).

Digital flood-inundation maps for coastal communities within Monmouth County in New Jersey were created by water surfaces generated by an Advanced Circulation hydrodynamic (ADCIRC) and Simulating Waves Nearshore (SWAN) model from the Federal Emergency Management Agency (FEMA) Region II coastal analysis and mapping study (Federal Emergency Management Agency, 2014). Six synthetic modeled tropical storm events from a library of 159 events were selected based on parameters including landfall location or closest approach location, maximum wind speed, central pressure, and radii of winds. Two storm events were selected for the tide gage providing two "scenarios" and accompanying inundation-map libraries. The contents of this data release support the following publication: Suro, T.P., Niemoczynski, M.J., Boetsma, A.C., and Niemoczynski, L.M., 2023, Moderate flood level scenarios: synthetic storm-driven flood-inundation maps for coastal communities in 10 New Jersey counties: U.S. Geological Survey Scientific Investigations Report 2023-5005, 64 p., https://doi.org/10.3133/sir20235005. The landing page on which this and 24 other storm scenarios reside is: Niemoczynski, L.M., Niemoczynski, M.J., Boetsma, A.C., and Suro, T.P., 2023, Synthetic storm-driven flood-inundation grids for coastal communities in 10 New Jersey counties: U.S Geological Survey data release, https://doi.org/10.5066/P9RVF9P8. References cited: Federal Emergency Management Agency, 2014, FEMA Region II Coastal Analysis and Mapping Study, accessed November 2, 2018, at http://www.region2coastal.com/resources/about-the-coastal-flood-study/

Digital flood-inundation maps for coastal communities within Cape May County in New Jersey were created by water surfaces generated by an Advanced Circulation hydrodynamic (ADCIRC) and Simulating Waves Nearshore (SWAN) model from the Federal Emergency Management Agency (FEMA) Region II coastal analysis and mapping study (Federal Emergency Management Agency, 2014). Six synthetic modeled tropical storm events from a library of 159 events were selected based on parameters including landfall location or closest approach location, maximum wind speed, central pressure, and radii of winds. Two storm events were selected for the tide gage providing two "scenarios" and accompanying inundation-map libraries. The contents of this data release support the following publication: Suro, T.P., Niemoczynski, M.J., Boetsma, A.C., and Niemoczynski, L.M., 2023, Moderate flood level scenarios: synthetic storm-driven flood-inundation maps for coastal communities in 10 New Jersey counties: U.S. Geological Survey Scientific Investigations Report 2023-5005, 64 p., https://doi.org/10.3133/sir20235005. The landing page on which this and 24 other storm scenarios reside is: Niemoczynski, L.M., Niemoczynski, M.J., Boetsma, A.C., and Suro, T.P., 2023, Synthetic storm-driven flood-inundation grids for coastal communities in 10 New Jersey counties: U.S Geological Survey data release, https://doi.org/10.5066/P9RVF9P8. References cited: Federal Emergency Management Agency, 2014, FEMA Region II Coastal Analysis and Mapping Study, accessed November 2, 2018, at http://www.region2coastal.com/resources/about-the-coastal-flood-study/