The total population of New Zealand was estimated at approximately 5.34 million people in 2024. Following a continuous upward trend, the total population has risen by around 2.23 million people since 1980. Between 2024 and 2030, the total population will rise by around 460 thousand people, continuing its consistent upward trajectory.This indicator describes the total population in the country at hand. This total population of the country consists of all persons falling within the scope of the census.

Total current population for New Zealand in 2025 is 5,310,695, a 0.77% increase from 2024.

<ul style='margin-top:20px;'>

<li>Total population for New Zealand in 2024 was <strong>5,269,939</strong>, a <strong>0.9% increase</strong> from 2023.</li>
<li>Total population for New Zealand in 2023 was <strong>5,223,100</strong>, a <strong>2.07% increase</strong> from 2022.</li>
<li>Total population for New Zealand in 2022 was <strong>5,117,200</strong>, a <strong>0.12% increase</strong> from 2021.</li>
</ul>Total population is based on the de facto definition of population, which counts all residents regardless of legal status or citizenship. The values shown are midyear estimates.

Population, total in New Zealand was reported at 5338500 in 2024, according to the World Bank collection of development indicators, compiled from officially recognized sources. New Zealand - Population, total - actual values, historical data, forecasts and projections were sourced from the World Bank on July of 2025.

Chart and table of population level and growth rate for the Auckland, New Zealand metro area from 1950 to 2025.

Population growth (annual %) in New Zealand was reported at 1.767 % in 2024, according to the World Bank collection of development indicators, compiled from officially recognized sources. New Zealand - Population growth (annual %) - actual values, historical data, forecasts and projections were sourced from the World Bank on July of 2025.

Population, male (% of total population) in New Zealand was reported at 49.69 % in 2024, according to the World Bank collection of development indicators, compiled from officially recognized sources. New Zealand - Population, male (% of total) - actual values, historical data, forecasts and projections were sourced from the World Bank on July of 2025.

Chart and table of population level and growth rate for the Christchurch, New Zealand metro area from 1950 to 2025.

New Zealand population density for 2021 was 19.41, a 0.41% increase from 2020.

<ul style='margin-top:20px;'>

<li>New Zealand population density for 2020 was <strong>19.33</strong>, a <strong>2.23% increase</strong> from 2019.</li>
<li>New Zealand population density for 2019 was <strong>18.91</strong>, a <strong>1.6% increase</strong> from 2018.</li>
<li>New Zealand population density for 2018 was <strong>18.61</strong>, a <strong>1.81% increase</strong> from 2017.</li>
</ul>Population density is midyear population divided by land area in square kilometers. Population is based on the de facto definition of population, which counts all residents regardless of legal status or citizenship--except for refugees not permanently settled in the country of asylum, who are generally considered part of the population of their country of origin. Land area is a country's total area, excluding area under inland water bodies, national claims to continental shelf, and exclusive economic zones. In most cases the definition of inland water bodies includes major rivers and lakes.

This dataset is the definitive version of the annually released statistical area 1 (SA1) boundaries as at 1 January 2025, as defined by Stats NZ. This version contains 33,164 SA1s (33,148 digitised and 16 with empty or null geometries (non-digitised)).

SA1 is an output geography that allows the release of more low-level data than is available at the meshblock level. Built by joining meshblocks, SA1s have an ideal size range of 100–200 residents, and a maximum population of about 500. This is to minimise suppression of population data in multivariate statistics tables.

The SA1 should:

form a contiguous cluster of one or more meshblocks,

be either urban, rural, or water in character,

be small enough to:

• allow flexibility for aggregation to other statistical geographies,

• allow users to aggregate areas into their own defined communities of interest,

form a nested hierarchy with statistical output geographies and administrative boundaries. It must:

• be built from meshblocks,

• either define or aggregate to define SA2s, urban rural areas, territorial authorities, and regional councils.

SA1s generally have a population of 100–200 residents, with some exceptions:

• SA1s with nil or nominal resident populations are created to represent remote mainland areas, unpopulated islands, inland water, inlets, or oceanic areas.

• Some SA1s in remote rural areas and urban industrial or business areas have fewer than 100 residents.

• Some SA1s that contain apartment blocks, retirement villages, and large non-residential facilities (prisons, boarding schools, etc.) have more than 500 residents.

SA1 numbering

SA1s are not named. SA1 codes have seven digits starting with a 7 and are numbered approximately north to south. Non-digitised codes start with 79.

As new SA1s are created, they are given the next available numeric code. If the composition of an SA1 changes through splitting or amalgamating different meshblocks, the SA1 is given a new code. The previous code no longer exists within that version and future versions of the SA1 classification.

Digitised and non-digitised SA1s

The digital geographic boundaries are defined and maintained by Stats NZ.

Aggregated from meshblocks, SA1s cover the land area of New Zealand, the water area to the 12-mile limit, the Chatham Islands, Kermadec Islands, sub-Antarctic islands, off-shore oil rigs, and Ross Dependency. The following 16 SA1s are held in non-digitised form.

7999901; New Zealand Economic Zone, 7999902; Oceanic Kermadec Islands,7999903; Kermadec Islands, 7999904; Oceanic Oil Rig Taranaki,7999905; Oceanic Campbell Island, 7999906; Campbell Island, 7999907; Oceanic Oil Rig Southland, 7999908; Oceanic Auckland Islands, 7999909; Auckland Islands, 7999910; Oceanic Bounty Islands, 7999911; Bounty Islands, 7999912; Oceanic Snares Islands, 7999913; Snares Islands, 7999914; Oceanic Antipodes Islands, 7999915; Antipodes Islands, 7999916; Ross Dependency.

​

High-definition version

This high definition (HD) version is the most detailed geometry, suitable for use in GIS for geometric analysis operations and for the computation of areas, centroids and other metrics. The HD version is aligned to the LINZ cadastre.

​

Macrons

Names are provided with and without tohutō/macrons. The column name for those without macrons is suffixed ‘ascii’.

​

Digital data

Digital boundary data became freely available on 1 July 2007.

​

Further information

To download geographic classifications in table formats such as CSV please use Ariā

For more information please refer to the Statistical standard for geographic areas 2023.

Contact: geography@stats.govt.nz

This dataset uses the 2025 meshblock layer, which was released as part of the 2025 geographic boundaries annual release.

​

These meshblocks were used as a basis to build the electoral population for each proposed electorate. The electoral populations are calculated from the 2023 Census data using the formulae specified in the Electoral Act 1993 and are confidentialised using Stats NZ confidentiality rules. The rules applied to the electoral populations are suppression of all unrounded counts below six (displayed as: ‘-999’) and random rounding to base three. There may be slight differences when comparing the total electoral population for electorates with totals derived using electoral population counts at meshblock level or from another source.

​

In a small number of cases, the proposed electorate boundaries do not align to the annual 2025 meshblock boundaries exactly. This is due to meshblock adjustments that have been made as part of the Representation Commission’s process. Apart from these adjustments, a meshblock freeze remains in place until the Representation Commission has finished its electorate boundary review and the new electorate boundaries have been set.

​

Refer to the current geographies boundaries table for a list of all current geographies and recent updates.

This dataset is the definitive version of the annually released statistical area 2 (SA2) boundaries as at 1 January 2025 as defined by Stats NZ. This version contains 2,395 SA2s (2,379 digitised and 16 with empty or null geometries (non-digitised)).

SA2 is an output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. The SA2 geography aims to reflect communities that interact together socially and economically. In populated areas, SA2s generally contain similar sized populations.

The SA2 should:

form a contiguous cluster of one or more SA1s,

excluding exceptions below, allow the release of multivariate statistics with minimal data suppression,

capture a similar type of area, such as a high-density urban area, farmland, wilderness area, and water area,

be socially homogeneous and capture a community of interest. It may have, for example:

• a shared road network,
• shared community facilities,
• shared historical or social links, or
• socio-economic similarity,

​

form a nested hierarchy with statistical output geographies and administrative boundaries. It must:

• be built from SA1s,
• either define or aggregate to define SA3s, urban areas, territorial authorities, and regional councils.

SA2s in city council areas generally have a population of 2,000–4,000 residents while SA2s in district council areas generally have a population of 1,000–3,000 residents.

In major urban areas, an SA2 or a group of SA2s often approximates a single suburb. In rural areas, rural settlements are included in their respective SA2 with the surrounding rural area.

SA2s in urban areas where there is significant business and industrial activity, for example ports, airports, industrial, commercial, and retail areas, often have fewer than 1,000 residents. These SA2s are useful for analysing business demographics, labour markets, and commuting patterns.

In rural areas, some SA2s have fewer than 1,000 residents because they are in conservation areas or contain sparse populations that cover a large area.

To minimise suppression of population data, small islands with zero or low populations close to the mainland, and marinas are generally included in their adjacent land-based SA2.

Zero or nominal population SA2s

To ensure that the SA2 geography covers all of New Zealand and aligns with New Zealand’s topography and local government boundaries, some SA2s have zero or nominal populations. These include:

• SA2s where territorial authority boundaries straddle regional council boundaries. These SA2s each have fewer than 200 residents and are: Arahiwi, Tiroa, Rangataiki, Kaimanawa, Taharua, Te More, Ngamatea, Whangamomona, and Mara.
• SA2s created for single islands or groups of islands that are some distance from the mainland or to separate large unpopulated islands from urban areas
• SA2s that represent inland water, inlets or oceanic areas including: inland lakes larger than 50 square kilometres, harbours larger than 40 square kilometres, major ports, other non-contiguous inlets and harbours defined by territorial authority, and contiguous oceanic areas defined by regional council.
• SA2s for non-digitised oceanic areas, offshore oil rigs, islands, and the Ross Dependency. Each SA2 is represented by a single meshblock. The following 16 SA2s are held in non-digitised form (SA2 code; SA2 name):

400001; New Zealand Economic Zone, 400002; Oceanic Kermadec Islands, 400003; Kermadec Islands, 400004; Oceanic Oil Rig Taranaki, 400005; Oceanic Campbell Island, 400006; Campbell Island, 400007; Oceanic Oil Rig Southland, 400008; Oceanic Auckland Islands, 400009; Auckland Islands, 400010 ; Oceanic Bounty Islands, 400011; Bounty Islands, 400012; Oceanic Snares Islands, 400013; Snares Islands, 400014; Oceanic Antipodes Islands, 400015; Antipodes Islands, 400016; Ross Dependency.

SA2 numbering and naming

Each SA2 is a single geographic entity with a name and a numeric code. The name refers to a geographic feature or a recognised place name or suburb. In some instances where place names are the same or very similar, the SA2s are differentiated by their territorial authority name, for example, Gladstone (Carterton District) and Gladstone (Invercargill City).

SA2 codes have six digits. North Island SA2 codes start with a 1 or 2, South Island SA2 codes start with a 3 and non-digitised SA2 codes start with a 4. They are numbered approximately north to south within their respective territorial authorities. To ensure the north–south code pattern is maintained, the SA2 codes were given 00 for the last two digits when the geography was created in 2018. When SA2 names or boundaries change only the last two digits of the code will change.

​

High-definition version

This high definition (HD) version is the most detailed geometry, suitable for use in GIS for geometric analysis operations and for the computation of areas, centroids and other metrics. The HD version is aligned to the LINZ cadastre.

​

Macrons

Names are provided with and without tohutō/macrons. The column name for those without macrons is suffixed ‘ascii’.

​

Digital data

Digital boundary data became freely available on 1 July 2007.

​

Further information

To download geographic classifications in table formats such as CSV please use Ariā

For more information please refer to the Statistical standard for geographic areas 2023.

Contact: geography@stats.govt.nz

Comprehensive socio-economic dataset for New Zealand including population demographics, economic indicators, geographic data, and social statistics. This dataset covers key metrics such as GDP, population density, area, capital city, and regional classifications.

Population ages 65 and above, male (% of male population) in New Zealand was reported at 15.86 % in 2023, according to the World Bank collection of development indicators, compiled from officially recognized sources. New Zealand - Population ages 65 and above, male (% of total) - actual values, historical data, forecasts and projections were sourced from the World Bank on June of 2025.

Refer to the current geographies boundaries table for a list of all current geographies and recent updates.

This dataset is the definitive version of the annually released statistical area 3 (SA3) boundaries as at 1 January 2025 as defined by Stats NZ. This version contains 929 SA3s, including 4 non-digitised SA3s.

The SA3 geography aims to meet three purposes:

1. approximate suburbs in major, large, and medium urban areas,

2. in predominantly rural areas, provide geographical areas that are larger in area and population size than SA2s but smaller than territorial authorities,

3. minimise data suppression.

SA3s in major, large, and medium urban areas were created by combining SA2s to approximate suburbs as delineated in the Fire and Emergency NZ (FENZ) Localities dataset. Some of the resulting SA3s have very large populations.

Outside of major, large, and medium urban areas, SA3s generally have populations of 5,000–10,000. These SA3s may represent either a single small urban area, a combination of small urban areas and their surrounding rural SA2s, or a combination of rural SA2s.

Zero or nominal population SA3s

To minimise the amount of unsuppressed data that can be provided in multivariate statistical tables, SA2s with fewer than 1,000 residents are combined with other SA2s wherever possible to reach the 1,000 SA3 population target. However, there are still a number of SA3s with zero or nominal populations.

Small population SA2s designed to maintain alignment between territorial authority and regional council geographies are merged with other SA2s to reach the 5,000–10,000 SA3 population target. These merges mean that some SA3s do not align with regional council boundaries but are aligned to territorial authority.

Small population island SA2s are included in their adjacent land-based SA3.

Island SA2s outside territorial authority or region are the same in the SA3 geography.

Inland water SA2s are aggregated and named by territorial authority, as in the urban rural classification.

Inlet SA2s are aggregated and named by territorial authority or regional council where the water area is outside the territorial authority.

Oceanic SA2s translate directly to SA3s as they are already aggregated to regional council.

The 16 non-digitised SA2s are aggregated to the following 4 non-digitised SA3s (SA3 code; SA3 name):

70001; Oceanic outside region, 70002; Oceanic oil rigs, 70003; Islands outside region, 70004; Ross Dependency outside region.

SA3 numbering and naming

Each SA3 is a single geographic entity with a name and a numeric code. The name refers to a suburb, recognised place name, or portion of a territorial authority. In some instances where place names are the same or very similar, the SA3s are differentiated by their territorial authority, for example, Hillcrest (Hamilton City) and Hillcrest (Rotorua District).

SA3 codes have five digits. North Island SA3 codes start with a 5, South Island SA3 codes start with a 6 and non-digitised SA3 codes start with a 7. They are numbered approximately north to south within their respective territorial authorities. When first created in 2025, the last digit of each code was 0. When SA3 boundaries change in future, only the last digit of the code will change to ensure the north-south pattern is maintained.

​

High-definition version

This high definition (HD) version is the most detailed geometry, suitable for use in GIS for geometric analysis operations and for the computation of areas, centroids and other metrics. The HD version is aligned to the LINZ cadastre.

​

Macrons

Names are provided with and without tohutō/macrons. The column name for those without macrons is suffixed ‘ascii’.

​

Digital data

Digital boundary data became freely available on 1 July 2007

​

Further information

To download geographic classifications in table formats such as CSV please use Ariā

For more information please refer to the Statistical standard for geographic areas 2023.

Contact: geography@stats.govt.nz

Refer to the current geographies boundaries table for a list of all current geographies and recent updates.

This dataset is the definitive version of the annually released meshblock boundaries as at 1 January 2025 as defined by Stats NZ. This version contains 57,551 meshblocks, including 16 with empty or null geometries (non-digitised meshblocks).

Stats NZ maintains an annual meshblock pattern for collecting and producing statistical data. This allows data to be compared over time.

A meshblock is the smallest geographic unit for which statistical data is collected and processed by Stats NZ. A meshblock is a defined geographic area, which can vary in size from part of a city block to a large area of rural land. The optimal size for a meshblock is 30–60 dwellings (containing approximately 60–120 residents).

Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone (EEZ) and is digitised to the 12-mile limit. Meshblocks are added together to build up larger geographic areas such as statistical area 1 (SA1), statistical area 2 (SA2), statistical area 3 (SA3), and urban rural (UR). They are also used to define electoral districts, territorial authorities, and regional councils.

Meshblock boundaries generally follow road centrelines, cadastral property boundaries, or topographical features such as rivers. Expanses of water in the form of lakes and inlets are defined separately from land.

Meshblock maintenance

Meshblock boundaries are amended by:

1. Splitting – subdividing a meshblock into two or more meshblocks.

2. Nudging – shifting a boundary to a more appropriate position.

Reasons for meshblock splits and nudges can include:

• to maintain meshblock criteria rules.
• to improve the size balance of meshblocks in areas where there has been population growth
• to maintain alignment to cadastre and other geographic features.
• Stats NZ requests for boundary changes so that statistical geography boundaries can be moved
• external requests for boundary changes so that administrative or electoral boundaries can be moved
• to separate land and water. Mainland, inland water, islands, inlets, and oceanic are defined separately

Meshblock changes are made throughout the year. A major release is made at 1 January each year with ad hoc releases available to users at other times.

While meshblock boundaries are continually under review, 'freezes' on changes to the boundaries are applied periodically. Such 'freezes' are imposed at the time of population censuses and during periods of intense electoral activity, for example, prior and during general and local body elections.

Meshblock numbering

Meshblocks are not named and have seven-digit codes.

When meshblocks are split, each new meshblock is given a new code. The original meshblock codes no longer exist within that version and future versions of the meshblock classification. Meshblock codes do not change when a meshblock boundary is nudged.

Meshblocks that existed prior to 2015 and have not changed are numbered from 0000100 to 3210003. Meshblocks created from 2015 onwards are numbered from 4000000.

Digitised and non-digitised meshblocks

The digital geographic boundaries are defined and maintained by Stats NZ.

Meshblocks cover the land area of New Zealand, the water area to the 12mile limit, the Chatham Islands, Kermadec Islands, sub-Antarctic islands, offshore oil rigs, and Ross Dependency. The following 16 meshblocks are not held in digitised form.

Meshblock

Location (statistical area 2 name)

• 0016901 / Oceanic Kermadec Islands
• 0016902 / Kermadec Islands
• 1588000 / Oceanic Oil Rig Taranaki
• 3166401 / Oceanic Campbell Island
• 3166402 / Campbell Island
• 3166600 / Oceanic Oil Rig Southland
• 3166710 / Oceanic Auckland Islands
• 3166711 / Auckland Islands
• 3195000 / Ross Dependency
• 3196001 / New Zealand Economic Zone
• 3196002 / Oceanic Bounty Islands
• 3196003 / Bounty Islands
• 3196004 / Oceanic Snares Islands
• 3196005 / Snares Island
• 3196006 / Oceanic Antipodes Islands
• 3196007 / Antipodes Islands

​

High-definition version

This high definition (HD) version is the most detailed geometry, suitable for use in GIS for geometric analysis operations and for the computation of areas, centroids and other metrics. The HD version is aligned to the LINZ cadastre.

​

Macrons

Names are provided with and without tohutō/macrons. The column name for those without macrons is suffixed ‘ascii’.

​

Digital data

Digital boundary data became freely available on 1 July 2007.

​

Further information

To download geographic classifications in table formats such as CSV please use Ariā

For more information please refer to the Statistical standard for geographic areas 2023.

Contact: geography@stats.govt.nz

Key information about New Zealand population

• The New Zealand population reached 5.4 million people in Dec 2024, compared with the previously reported figure of 5.3 million people in Dec 2023
• The data reached an all-time high of 5.4 million people in Dec 2024 and a record low of 1.9 million people in Dec 1950

• In the latest reports, New Zealand Unemployment Rate increased to 5.1 % in Dec 2024
• Monthly earnings of the New Zealand population was 3,902.1 USD in Dec 2024
• New Zealand Labour Force Participation Rate increased to 71.3 % in Dec 2024

The total population in New Zealand was estimated at 5.4 million people in 2024, according to the latest census figures and projections from Trading Economics. This dataset provides - New Zealand Population - actual values, historical data, forecast, chart, statistics, economic calendar and news.

Refer to the current geographies boundaries table for a list of all current geographies and recent updates.

This dataset is the definitive set of statistical area 1 (SA1) boundaries concorded to higher geographies as at 1 January 2025. This version contains 33,164 SA1s, including 16 with empty or null geometries (non-digitised SA1s). SA1 is an output geography that allows the release of more detailed information about population characteristics than is available at the meshblock level.

Built by joining meshblocks, SA1s have an ideal size range of 100–200 residents, and a maximum population of about 500. This is to minimise suppression of population data in multivariate statistics tables.

This SA1 higher geographies 2025 file is a correspondence, or concordance, which relates SA1s to larger geographic areas or 'higher geographies'. The higher geographies contained in this concordance are: statistical area 2 (SA22025), statistical area 3 (SA32025), urban rural (UR2025), and urban rural indicator (IUR2025), urban accessibility indicator (IUA), functional urban area (FUA), indicator functional urban area (IFUA) and functional urban area type (TFUA), territorial authority (TA2025), and regional council (REGC2025). The geography urban accessibility indicator (IUA) was first published in 2020 and added to this concordance in 2022.

​

High-definition version

This high definition (HD) version is the most detailed geometry, suitable for use in GIS for geometric analysis operations and for the computation of areas, centroids and other metrics. The HD version is aligned to the LINZ cadastre.

​

Macrons

Names are provided with and without tohutō/macrons. The column name for those without macrons is suffixed ‘ascii’.

Digital data

Digital boundary data became freely available on 1 July 2007.

​

Further information

To download geographic classifications in table formats such as CSV please use Ariā

For more information please refer to the Statistical standard for geographic areas 2023.

Contact: geography@stats.govt.nz

Refer to the current geographies boundaries table for a list of all current geographies and recent updates.

This dataset is the definitive version of the annually released statistical area 2 (SA2) boundaries as at 1 January 2025 as defined by Stats NZ, clipped to the coastline. This clipped version has been created for cartographic purposes and so does not fully represent the official full extent boundaries. This clipped version contains 2,311 SA2 areas.

SA2 is an output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. The SA2 geography aims to reflect communities that interact together socially and economically. In populated areas, SA2s generally contain similar sized populations.

The SA2 should:

form a contiguous cluster of one or more SA1s,

excluding exceptions below, allow the release of multivariate statistics with minimal data suppression,

capture a similar type of area, such as a high-density urban area, farmland, wilderness area, and water area,

be socially homogeneous and capture a community of interest. It may have, for example:

• a shared road network,

• shared community facilities,

• shared historical or social links, or

• socio-economic similarity,

form a nested hierarchy with statistical output geographies and administrative boundaries. It must:

• be built from SA1s,

• either define or aggregate to define SA3s, urban areas, territorial authorities, and regional councils.

SA2s in city council areas generally have a population of 2,000–4,000 residents while SA2s in district council areas generally have a population of 1,000–3,000 residents.

In major urban areas, an SA2 or a group of SA2s often approximates a single suburb. In rural areas, rural settlements are included in their respective SA2 with the surrounding rural area.

SA2s in urban areas where there is significant business and industrial activity, for example ports, airports, industrial, commercial, and retail areas, often have fewer than 1,000 residents. These SA2s are useful for analysing business demographics, labour markets, and commuting patterns.

In rural areas, some SA2s have fewer than 1,000 residents because they are in conservation areas or contain sparse populations that cover a large area.

To minimise suppression of population data, small islands with zero or low populations close to the mainland, and marinas are generally included in their adjacent land-based SA2.

Zero or nominal population SA2s

To ensure that the SA2 geography covers all of New Zealand and aligns with New Zealand’s topography and local government boundaries, some SA2s have zero or nominal populations. These include:

• SA2s where territorial authority boundaries straddle regional council boundaries. These SA2s each have fewer than 200 residents and are: Arahiwi, Tiroa, Rangataiki, Kaimanawa, Taharua, Te More, Ngamatea, Whangamomona, and Mara.

• SA2s created for single islands or groups of islands that are some distance from the mainland or to separate large unpopulated islands from urban areas

• SA2s that represent inland water, inlets or oceanic areas including: inland lakes larger than 50 square kilometres, harbours larger than 40 square kilometres, major ports, other non-contiguous inlets and harbours defined by territorial authority, and contiguous oceanic areas defined by regional council.

• SA2s for non-digitised oceanic areas, offshore oil rigs, islands, and the Ross Dependency. Each SA2 is represented by a single meshblock. The following 16 SA2s are held in non-digitised form (SA2 code; SA2 name):

400001; New Zealand Economic Zone, 400002; Oceanic Kermadec Islands, 400003; Kermadec Islands, 400004; Oceanic Oil Rig Taranaki, 400005; Oceanic Campbell Island, 400006; Campbell Island, 400007; Oceanic Oil Rig Southland, 400008; Oceanic Auckland Islands, 400009; Auckland Islands, 400010 ; Oceanic Bounty Islands, 400011; Bounty Islands, 400012; Oceanic Snares Islands, 400013; Snares Islands, 400014; Oceanic Antipodes Islands, 400015; Antipodes Islands, 400016; Ross Dependency.

SA2 numbering and naming

Each SA2 is a single geographic entity with a name and a numeric code. The name refers to a geographic feature or a recognised place name or suburb. In some instances where place names are the same or very similar, the SA2s are differentiated by their territorial authority name, for example, Gladstone (Carterton District) and Gladstone (Invercargill City).

SA2 codes have six digits. North Island SA2 codes start with a 1 or 2, South Island SA2 codes start with a 3 and non-digitised SA2 codes start with a 4. They are numbered approximately north to south within their respective territorial authorities. To ensure the north–south code pattern is maintained, the SA2 codes were given 00 for the last two digits when the geography was created in 2018. When SA2 names or boundaries change only the last two digits of the code will change.

​

Clipped Version

This clipped version has been created for cartographic purposes and so does not fully represent the official full extent boundaries.

​

High-definition version

This high definition (HD) version is the most detailed geometry, suitable for use in GIS for geometric analysis operations and for the computation of areas, centroids and other metrics. The HD version is aligned to the LINZ cadastre.

​

Macrons

Names are provided with and without tohutō/macrons. The column name for those without macrons is suffixed ‘ascii’.

​

Digital data

Digital boundary data became freely available on 1 July 2007.

Further information

To download geographic classifications in table formats such as CSV please use Ariā

For more information please refer to the Statistical standard for geographic areas 2023.

Contact: geography@stats.govt.nz

There were 3 240 000 Linkedin users in New Zealand in June 2025, which accounted for 61.9% of its entire population. People aged 25 to 34 were the largest user group (1 400 000).