Within the Gulf of Mexico, there are two types of maps that depict blocks that could be leased. An older format, known as the Leasing Map, was based on Texas or Louisiana State Plane mapping projections. Leasing Maps were created as oil/gas leasing expanded offshore of Texas and Louisiana. Eventually the Leasing Maps were projected so far offshore that negative coordinates were required to support the projection. This has created a wide variety of Leasing Maps in projection, shape and overall size, but the blocks remained consistent, and are never larger than the 5760 acres. Because the Leasing Maps reflect so many active leases, they are still being maintained. However, in areas further offshore where Leasing Maps have never been generated, the Official Protraction Diagram (OPD) is used. A standard OPD is 1 degree in latitude by 2 degrees in longitude (at lower latitudes: 0 - 48 degrees) as in the Gulf of Mexico. At higher latitudes (48 - 75 degrees) such as Alaska and northern Washington, OPDs are 3 degrees wide. OPD limits usually approximate the standard 1:250,000 scale U.S. Geological Survey topographic map series. The OPDs are numbered using the United Nations International Map of the World Numbering System. OPD names usually coincide with standard topographic sheet names when diagrams include land areas. OPD sheet names relate to land features, or to hydrographic features contained within the limits of the diagram. Shoreline planimetric detail is shown when it falls within the limits of a diagram. Older OPDs were prepared on mylar with manual cartographic methods and then scanned into Adobe .pdf files. Newer OPDs were prepared electronically and converted to Adobe .pdf files. Further information on the historic development of OPD's can be found in OCS Report MMS 99-0006: Boundary Development on the Outer Continental Shelf: https://www.boem.gov/uploadedFiles/BOEM/Oil_and_Gas_Energy_Program/Mapping_and_Data/99-0006.pdf Also see the metadata for each of the individual GIS files used to create these OPDs. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs), serve as the legal definition for BOEM offshore boundary coordinates and area descriptions.

This dataset is a compilation of available oil and gas pipeline data and is maintained by BSEE. Pipelines are used to transport and monitor oil and/or gas from wells within the outer continental shelf (OCS) to resource collection locations. Currently, pipelines managed by BSEE are found in Gulf of Mexico and southern California waters.

© MarineCadastre.gov This layer is a component of BOEMRE Layers.

This Map Service contains many of the primary data types created by both the Bureau of Ocean Energy Management (BOEM) and the Bureau of Safety and Environmental Enforcement (BSEE) within the Department of Interior (DOI) for the purpose of managing offshore federal real estate leases for oil, gas, minerals, renewable energy, sand and gravel. These data layers are being made available as REST mapping services for the purpose of web viewing and map overlay viewing in GIS systems. Due to re-projection issues which occur when converting multiple UTM zone data to a single national or regional projected space, and line type changes that occur when converting from UTM to geographic projections, these data layers should not be used for official or legal purposes. Only the original data found within BOEM/BSEE’s official internal database, federal register notices or official paper or pdf map products may be considered as the official information or mapping products used by BOEM or BSEE. A variety of data layers are represented within this REST service are described further below. These and other cadastre information the BOEM and BSEE produces are generated in accordance with 30 Code of Federal Regulations (CFR) 256.8 to support Federal land ownership and mineral resource management.

For more information – Contact: Branch Chief, Mapping and Boundary Branch, BOEM, 381 Elden Street, Herndon, VA 20170. Telephone (703) 787-1312; Email: mapping.boundary.branch@boem.gov

The REST services for National Level Data can be found here: http://gis.boemre.gov/arcgis/rest/services/BOEM_BSEE/MMC_Layers/MapServer

REST services for regional level data can be found by clicking on the region of interest from the following URL: http://gis.boemre.gov/arcgis/rest/services/BOEM_BSEE

Individual Regional Data or in depth metadata for download can be obtained in ESRI Shape file format by clicking on the region of interest from the following URL: http://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Index.aspx

Currently the following layers are available from this REST location:

OCS Drilling Platforms -Locations of structures at and beneath the water surface used for the purpose of exploration and resource extraction. Only platforms in federal Outer Continental Shelf (OCS) waters are included. A database of platforms and rigs is maintained by BSEE.

OCS Oil and Natural Gas Wells -Existing wells drilled for exploration or extraction of oil and/or gas products. Additional information includes the lease number, well name, spud date, the well class, surface area/block number, and statistics on well status summary. Only wells found in federal Outer Continental Shelf (OCS) waters are included. Wells information is updated daily. Additional files are available on well completions and well tests. A database of wells is maintained by BSEE.

OCS Oil & Gas Pipelines -This dataset is a compilation of available oil and gas pipeline data and is maintained by BSEE. Pipelines are used to transport and monitor oil and/or gas from wells within the outer continental shelf (OCS) to resource collection locations. Currently, pipelines managed by BSEE are found in Gulf of Mexico and southern California waters.

Unofficial State Lateral Boundaries - The approximate location of the boundary between two states seaward of the coastline and terminating at the Submerged Lands Act Boundary. Because most State boundary locations have not been officially described beyond the coast, are disputed between states or in some cases the coastal land boundary description is not available, these lines serve as an approximation that was used to determine a starting point for creation of BOEM’s OCS Administrative Boundaries. GIS files are not available for this layer due to its unofficial status.

BOEM OCS Administrative Boundaries - Outer Continental Shelf (OCS) Administrative Boundaries Extending from the Submerged Lands Act Boundary seaward to the Limit of the United States OCS (The U.S. 200 nautical mile Limit, or other marine boundary)For additional details please see the January 3, 2006 Federal Register Notice.

BOEM Limit of OCSLA ‘8(g)’ zone - The Outer Continental Shelf Lands Act '8(g) Zone' lies between the Submerged Lands Act (SLA) boundary line and a line projected 3 nautical miles seaward of the SLA boundary line. Within this zone, oil and gas revenues are shared with the coastal state(s). The official version of the ‘8(g)’ Boundaries can only be found on the BOEM Official Protraction Diagrams (OPDs) or Supplemental Official Protraction described below.

Submerged Lands Act Boundary - The SLA boundary defines the seaward limit of a state's submerged lands and the landward boundary of federally managed OCS lands. The official version of the SLA Boundaries can only be found on the BOEM Official Protraction Diagrams (OPDs) or Supplemental Official Protraction Diagrams described below.

Atlantic Wildlife Survey Tracklines(2005-2012) - These data depict tracklines of wildlife surveys conducted in the Mid-Atlantic region since 2005. The tracklines are comprised of aerial and shipboard surveys. These data are intended to be used as a working compendium to inform the diverse number of groups that conduct surveys in the Mid-Atlantic region.The tracklines as depicted in this dataset have been derived from source tracklines and transects. The tracklines have been simplified (modified from their original form) due to the large size of the Mid-Atlantic region and the limited ability to map all areas simultaneously.The tracklines are to be used as a general reference and should not be considered definitive or authoritative. This data can be downloaded from http://www.boem.gov/uploadedFiles/BOEM/Renewable_Energy_Program/Mapping_and_Data/ATL_WILDLIFE_SURVEYS.zip

BOEM OCS Protraction Diagrams & Leasing Maps - This data set contains a national scale spatial footprint of the outer boundaries of the Bureau of Ocean Energy Management’s (BOEM’s) Official Protraction Diagrams (OPDs) and Leasing Maps (LMs). It is updated as needed. OPDs and LMs are mapping products produced and used by the BOEM to delimit areas available for potential offshore mineral leases, determine the State/Federal offshore boundaries, and determine the limits of revenue sharing and other boundaries to be considered for leasing offshore waters. This dataset shows only the outline of the maps that are available from BOEM.Only the most recently published paper or pdf versions of the OPDs or LMs should be used for official or legal purposes. The pdf maps can be found by going to the following link and selecting the appropriate region of interest. http://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Index.aspx Both OPDs and LMs are further subdivided into individual Outer Continental Shelf(OCS) blocks which are available as a separate layer. Some OCS blocks that also contain other boundary information are known as Supplemental Official Block Diagrams (SOBDs.) Further information on the historic development of OPD's can be found in OCS Report MMS 99-0006: Boundary Development on the Outer Continental Shelf: http://www.boemre.gov/itd/pubs/1999/99-0006.PDF Also see the metadata for each of the individual GIS data layers available for download. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs), serve as the legal definition for BOEM offshore boundary coordinates and area descriptions.

BOEM OCS Lease Blocks - Outer Continental Shelf (OCS) lease blocks serve as the legal definition for BOEM offshore boundary coordinates used to define small geographic areas within an Official Protraction Diagram (OPD) for leasing and administrative purposes. OCS blocks relate back to individual Official Protraction Diagrams and are not uniquely numbered. Only the most recently published paper or pdf

This file is based on the Mapping and Boundary Branch's Official Protraction Diagram (OPD)and Leasing Maps (LM). Each offshore area is defined by an API Number corresponding to those in the API Bulletin Number D12A. OPDs are numbered using the United Nations International Map of the World Numbering System, and are generally named for land or hydrographic features contained within the limits of the diagram. This data set contains Official Protraction Diagram (OPD) and Leasing Map (LM) outlines in ESRI shape file formats for the BOEM Gulf of Mexico Region. The use of OPDs and LMs makes it easier to refer to individual blocks within a region or planning area. These diagrams were clipped along the Submerged Lands Act (SLA) boundary and along lines contained in the Continental Shelf Boundaries (CSB) GIS data files to show only those blocks or portions thereof within federal jurisdiction. Because GIS projection and topology functions can change or generalize coordinates, these GIS files are NOT an OFFICIAL record for the exact OPD boundaries. Only the paper OPD or a digital image of them serves as OFFICIAL records.Official Protraction Diagrams and other cadastre information the BOEM produces are generated in accordance with 30 Code of Federal Regulations (CFR) Part 556.8 Subpart A, (formerly Part 256.8 Subpart A (2010)) to support Federal land ownership and mineral resource management. Further information on the SLA and development of this line from baseline points can be found in OCS Report BOEM 99-0006: Boundary Development on the Outer Continental Shelf. https://www.boem.gov/BOEM-Newsroom/Library/Publications/1999/99-0006-pdf.aspx Because GIS projection and topology functions can change or generalize coordinates, and because shapefiles cannot represent true arcs, these GIS files are considered to be approximate and are NOT an OFFICIAL record for the exact block coordinates or areas. The Official Protraction Diagrams (OPDs)and Leasing Maps (LMs) and Supplemental Official Block Diagrams (SOBDs) serve as the legal definition for BOEM offshore boundary coordinates and area descriptions and can be found at the following location: https://www.boem.gov/Official-Protraction-Diagrams/. Contains the protraction polygons clipped on the fedstate (SLA-Boundary) as of March 15, 2013. Used ArcCatalog to create shape files.

This data set contains a national scale spatial footprint of the outer boundaries of the Bureau of Ocean Energy Management’s (BOEM’s) Official Protraction Diagrams (OPDs) and Leasing Maps (LMs). It is updated as needed. OPDs and LMs are mapping products produced and used by the BOEM to delimit areas available for potential offshore mineral leases, determine the State/Federal offshore boundaries, and determine the limits of revenue sharing and other boundaries to be considered for leasing offshore waters. This dataset shows only the outline of the maps that are available from BOEM.Only the most recently published paper or pdf versions of the OPDs or LMs should be used for official or legal purposes. The pdf maps can be found by going to the following link and selecting the appropriate region of interest. http://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Index.aspx Both OPDs and LMs are further subdivided into individual Outer Continental Shelf(OCS) blocks which are available as a separate layer. Some OCS blocks that also contain other boundary information are known as Supplemental Official Block Diagrams (SOBDs.) Further information on the historic development of OPD's can be found in OCS Report MMS 99-0006: Boundary Development on the Outer Continental Shelf: http://www.boemre.gov/itd/pubs/1999/99-0006.PDF Also see the metadata for each of the individual GIS data layers available for download. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs), serve as the legal definition for BOEM offshore boundary coordinates and area descriptions.

Locations of structures at and beneath the water surface used for the purpose of exploration and resource extraction. Only platforms in federal Outer Continental Shelf (OCS) waters are included. A database of platforms and rigs is maintained by BSEE.

© MarineCadastre.gov This layer is a component of BOEMRE Layers.

This Map Service contains many of the primary data types created by both the Bureau of Ocean Energy Management (BOEM) and the Bureau of Safety and Environmental Enforcement (BSEE) within the Department of Interior (DOI) for the purpose of managing offshore federal real estate leases for oil, gas, minerals, renewable energy, sand and gravel. These data layers are being made available as REST mapping services for the purpose of web viewing and map overlay viewing in GIS systems. Due to re-projection issues which occur when converting multiple UTM zone data to a single national or regional projected space, and line type changes that occur when converting from UTM to geographic projections, these data layers should not be used for official or legal purposes. Only the original data found within BOEM/BSEE’s official internal database, federal register notices or official paper or pdf map products may be considered as the official information or mapping products used by BOEM or BSEE. A variety of data layers are represented within this REST service are described further below. These and other cadastre information the BOEM and BSEE produces are generated in accordance with 30 Code of Federal Regulations (CFR) 256.8 to support Federal land ownership and mineral resource management.

For more information – Contact: Branch Chief, Mapping and Boundary Branch, BOEM, 381 Elden Street, Herndon, VA 20170. Telephone (703) 787-1312; Email: mapping.boundary.branch@boem.gov

The REST services for National Level Data can be found here: http://gis.boemre.gov/arcgis/rest/services/BOEM_BSEE/MMC_Layers/MapServer

REST services for regional level data can be found by clicking on the region of interest from the following URL: http://gis.boemre.gov/arcgis/rest/services/BOEM_BSEE

Individual Regional Data or in depth metadata for download can be obtained in ESRI Shape file format by clicking on the region of interest from the following URL: http://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Index.aspx

Currently the following layers are available from this REST location:

OCS Drilling Platforms -Locations of structures at and beneath the water surface used for the purpose of exploration and resource extraction. Only platforms in federal Outer Continental Shelf (OCS) waters are included. A database of platforms and rigs is maintained by BSEE.

OCS Oil and Natural Gas Wells -Existing wells drilled for exploration or extraction of oil and/or gas products. Additional information includes the lease number, well name, spud date, the well class, surface area/block number, and statistics on well status summary. Only wells found in federal Outer Continental Shelf (OCS) waters are included. Wells information is updated daily. Additional files are available on well completions and well tests. A database of wells is maintained by BSEE.

OCS Oil & Gas Pipelines -This dataset is a compilation of available oil and gas pipeline data and is maintained by BSEE. Pipelines are used to transport and monitor oil and/or gas from wells within the outer continental shelf (OCS) to resource collection locations. Currently, pipelines managed by BSEE are found in Gulf of Mexico and southern California waters.

Unofficial State Lateral Boundaries - The approximate location of the boundary between two states seaward of the coastline and terminating at the Submerged Lands Act Boundary. Because most State boundary locations have not been officially described beyond the coast, are disputed between states or in some cases the coastal land boundary description is not available, these lines serve as an approximation that was used to determine a starting point for creation of BOEM’s OCS Administrative Boundaries. GIS files are not available for this layer due to its unofficial status.

BOEM OCS Administrative Boundaries - Outer Continental Shelf (OCS) Administrative Boundaries Extending from the Submerged Lands Act Boundary seaward to the Limit of the United States OCS (The U.S. 200 nautical mile Limit, or other marine boundary)For additional details please see the January 3, 2006 Federal Register Notice.

BOEM Limit of OCSLA ‘8(g)’ zone - The Outer Continental Shelf Lands Act '8(g) Zone' lies between the Submerged Lands Act (SLA) boundary line and a line projected 3 nautical miles seaward of the SLA boundary line. Within this zone, oil and gas revenues are shared with the coastal state(s). The official version of the ‘8(g)’ Boundaries can only be found on the BOEM Official Protraction Diagrams (OPDs) or Supplemental Official Protraction described below.

Submerged Lands Act Boundary - The SLA boundary defines the seaward limit of a state's submerged lands and the landward boundary of federally managed OCS lands. The official version of the SLA Boundaries can only be found on the BOEM Official Protraction Diagrams (OPDs) or Supplemental Official Protraction Diagrams described below.

Atlantic Wildlife Survey Tracklines(2005-2012) - These data depict tracklines of wildlife surveys conducted in the Mid-Atlantic region since 2005. The tracklines are comprised of aerial and shipboard surveys. These data are intended to be used as a working compendium to inform the diverse number of groups that conduct surveys in the Mid-Atlantic region.The tracklines as depicted in this dataset have been derived from source tracklines and transects. The tracklines have been simplified (modified from their original form) due to the large size of the Mid-Atlantic region and the limited ability to map all areas simultaneously.The tracklines are to be used as a general reference and should not be considered definitive or authoritative. This data can be downloaded from http://www.boem.gov/uploadedFiles/BOEM/Renewable_Energy_Program/Mapping_and_Data/ATL_WILDLIFE_SURVEYS.zip

BOEM OCS Protraction Diagrams & Leasing Maps - This data set contains a national scale spatial footprint of the outer boundaries of the Bureau of Ocean Energy Management’s (BOEM’s) Official Protraction Diagrams (OPDs) and Leasing Maps (LMs). It is updated as needed. OPDs and LMs are mapping products produced and used by the BOEM to delimit areas available for potential offshore mineral leases, determine the State/Federal offshore boundaries, and determine the limits of revenue sharing and other boundaries to be considered for leasing offshore waters. This dataset shows only the outline of the maps that are available from BOEM.Only the most recently published paper or pdf versions of the OPDs or LMs should be used for official or legal purposes. The pdf maps can be found by going to the following link and selecting the appropriate region of interest. http://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Index.aspx Both OPDs and LMs are further subdivided into individual Outer Continental Shelf(OCS) blocks which are available as a separate layer. Some OCS blocks that also contain other boundary information are known as Supplemental Official Block Diagrams (SOBDs.) Further information on the historic development of OPD's can be found in OCS Report MMS 99-0006: Boundary Development on the Outer Continental Shelf: http://www.boemre.gov/itd/pubs/1999/99-0006.PDF Also see the metadata for each of the individual GIS data layers available for download. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs), serve as the legal definition for BOEM offshore boundary coordinates and area descriptions.

BOEM OCS Lease Blocks - Outer Continental Shelf (OCS) lease blocks serve as the legal definition for BOEM offshore boundary coordinates used to define small geographic areas within an Official Protraction Diagram (OPD) for leasing and administrative purposes. OCS blocks relate back to individual Official Protraction Diagrams and are not uniquely numbered. Only the most recently published paper or pdf versions of the OPDs or LMs or SOBDs should be used for official or legal purposes. The pdf

California State Lands Commission Offshore Oil Leases in the vicinity of Santa Barbara, Ventura, and Orange County.The polygons in this layer show the position of Offshore Oil Leases as documented by former State Lands Senior Boundary Determination Officer, Cris N. Perez and as reviewed and updated by GIS and Boundary staff.Background: This layer represents active offshore oil and gas agreements in California waters, which are what remain of the more than 60 originally issued. These leases were issued prior to the catastrophic 1969 oil spill from Platform A in federal waters off Santa Barbara County, and some predate the formation of the Commission. Between 2010 and 2014, the bulk of the approximately $300 million generated annually for the state's General Fund from oil and gas agreements was from these offshore leases.In 1921, the Legislature created the first tidelands oil and gas leasing program. Between 1921 and 1929, approximately 100 permits and leases were issued and over 850 wells were drilled in Santa Barbara and Ventura Counties. In 1929, the Legislature prohibited any new leases or permits. In 1933, however, the prohibition was partially lifted in response to an alleged theft of tidelands oil in Huntington Beach. It wasn't until 1938, and again in 1955, that the Legislature would allow new offshore oil and gas leasing. Except for limited circumstances, the Legislature has consistently placed limits on the areas that the Commission may offer for lease and in 1994, placed the entirety of California's coast off-limits to new oil and gas leases. Layer Creation Process:In 1997 Cris N. Perez, Senior Boundary Determination Officer of the Southern California Section of the State Lands Division, prepared a report on the Commission’s Offshore Oil Leases to:A. Show the position of Offshore Oil Leases. B. Produce a hard copy of 1927 NAD Coordinates for each lease. C. Discuss any problems evident after plotting the leases.Below are some of the details Cris included in the report:I have plotted the leases that were supplied to me by the Long Beach Office and computed 1927 NAD California Coordinates for each one. Where the Mean High Tide Line (MHTL) was called for and not described in the deed, I have plotted the California State Lands Commission CB Map Coordinates, from the actual field surveys of the Mean High Water Line and referenced them wherever used. Where the MHTL was called for and not described in the deed and no California State Lands Coordinates were available, I digitized the maps entitled, “Map of the Offshore Ownership Boundary of the State of California Drawn pursuant to the Supplemental Decree of the U.S. Supreme Court in the U.S. V. California, 382 U.S. 448 (1966), Scale 1:10000 Sheets 1-161.” The shore line depicted on these maps is the Mean Lower Low Water (MLLW) Line as shown on the Hydrographic or Topographic Sheets for the coastline. If a better fit is needed, a field survey to position this line will need to be done.The coordinates listed in Cris’ report were retrieved through Optical Character Recognition (OCR) and used to produce GIS polygons using Esri ArcGIS software. Coordinates were checked after the OCR process when producing the polygons in ArcMap to ensure accuracy. Original Coordinate systems (NAD 1927 California State Plane Zones 5 and 6) were used initially, with each zone being reprojected to NAD 83 Teale Albers Meters and merged after the review process.While Cris’ expertise and documentation were relied upon to produce this GIS Layer, certain polygons were reviewed further for any potential updates since Cris’ document and for any unusual geometry. Boundary Determination Officers addressed these issues and plotted leases currently listed as active, but not originally in Cris’ report. On December 24, 2014, the SLA boundary offshore of California was fixed (permanently immobilized) by a decree issued by the U.S. Supreme Court United States v. California, 135 S. Ct. 563 (2014). Offshore leases were clipped so as not to exceed the limits of this fixed boundary. Lease Notes:PRC 1482The “lease area” for this lease is based on the Compensatory Royalty Agreement dated 1-21-1955 as found on the CSLC Insider. The document spells out the distinction between “leased lands” and “state lands”. The leased lands are between two private companies and the agreement only makes a claim to the State’s interest as those lands as identified and surveyed per the map Tract 893, Bk 27 Pg 24. The map shows the State’s interest as being confined to the meanders of three sloughs, one of which is severed from the bay (Anaheim) by a Tideland sale. It should be noted that the actual sovereign tide and or submerged lands for this area is all those historic tide and submerged lands minus and valid tide land sales patents. The three parcels identified were also compared to what the Orange County GIS land records system has for their parcels. Shapefiles were downloaded from that site as well as two centerline monuments for 2 roads covered by the Tract 893. It corresponded well, so their GIS linework was held and clipped or extended to make a parcel.MJF Boundary Determination Officer 12/19/16PRC 3455The “lease area” for this lease is based on the Tract No. 2 Agreement, Long Beach Unit, Wilmington Oil Field, CA dated 4/01/1965 and found on the CSLC insider (also recorded March 12, 1965 in Book M 1799, Page 801).Unit Operating Agreement, Long Beach Unit recorded March 12, 1965 in Book M 1799 page 599.“City’s Portion of the Offshore Area” shall mean the undeveloped portion of the Long Beach tidelands as defined in Section 1(f) of Chapter 138, and includes Tract No. 1”“State’s Portion of the Offshore Area” shall mean that portion of the Alamitos Beach Park Lands, as defined in Chapter 138, included within the Unit Area and includes Tract No. 2.”“Alamitos Beach Park Lands” means those tidelands and submerged lands, whether filled or unfilled, described in that certain Judgment After Remittitur in The People of the State of California v. City of Long Beach, Case No. 683824 in the Superior Court of the State of California for the County of Los Angeles, dated May 8, 1962, and entered on May 15, 1962 in Judgment Book 4481, at Page 76, of the Official Records of the above entitled court”*The description for Tract 2 has an EXCEPTING (statement) “therefrom that portion lying Southerly of the Southerly line of the Boundary of Subsidence Area, as shown on Long Beach Harbor Department {LBHD} Drawing No. D-98. This map could not be found in records nor via a PRA request to the LBHD directly. Some maps were located that show the extents of subsidence in this area being approximately 700 feet waterward of the MHTL as determined by SCC 683824. Although the “EXCEPTING” statement appears to exclude most of what would seem like the offshore area (out to 3 nautical miles from the MHTL which is different than the actual CA offshore boundary measured from MLLW) the 1964, ch 138 grant (pg25) seems to reference the lands lying seaward of that MHTL and ”westerly of the easterly boundary of the undeveloped portion of the Long Beach tidelands, the latter of which is the same boundary (NW) of tract 2. This appears to then indicate that the “EXCEPTING” area is not part of the Lands Granted to City of Long Beach and appears to indicate that this portion might be then the “State’s Portion of the Offshore Area” as referenced in the Grant and the Unit Operating Agreement. Section “f” in the CSLC insider document (pg 9) defines the Contract Lands: means Tract No. 2 as described in Exhibit “A” to the Unit Agreement, and as shown on Exhibit “B” to the Unit Agreement, together with all other lands within the State’s Portion of the Offshore Area.Linework has been plotted in accordance with the methods used to produce this layer, with record lines rotated to those as listed in the descriptions. The main boundaries being the MHTL(north/northeast) that appears to be fixed for most of the area (projected to the city boundary on the east/southeast); 3 nautical miles from said MHTL on the south/southwest; and the prolongation of the NWly line of Block 50 of Alamitos Bay Tract.MJF Boundary Determination Officer 12-27-16PRC 4736The “lease area” for this lease is based on the Oil and Gas Lease and Agreement as found on the CSLC insider and recorded August 17, 1973 in BK 10855 PG 432 Official Records, Orange County. The State’s Mineral Interests are confined to Parcels “B-1” and “B-2” and are referred to as “State Mineral Lands” comprising 70.00 Acres. The lessee each has a right to certain uses including but not limited to usage of utility corridors, 110 foot radius parcels surrounding well-sites and roads. The State also has access to those same roads per this agreement/lease. Those uses are allowed in what are termed “State Lands”-Parcel E and “Leased Lands” which are defined as the “South Bolsa Lease Area”-Parcel C (2 parcels) and “North Bolsa Lease Area”-Parcel D. The “State Lands”-Parcel E are actually 3 parcels, 2 of which are within road right-of-ways. MJF Boundary Determination Officer 12-28-16

Outer Continental Shelf Lease BlocksImportant Note: This item is in mature support as of October 2024 and will be retired in February 2025.This feature layer, utilizing National Geospatial Data Asset (NGDA) data from the Bureau of Ocean Energy Management (BOEM), displays Outer Continental Shelf (OCS) Lease Blocks. Per BOEM, “Outer Continental Shelf (OCS) lease blocks serve as the legal definition for BOEM offshore boundary coordinates used to define small geographic areas within an Official Protraction Diagram (OPD) for leasing and administrative purposes.”Block 6782 in the Atlantic RegionData currency: This cached Esri federal service is checked weekly for updates from its enterprise federal source and will support mapping, analysis, data exports and OGC API – Feature access:BOEM OCS Lease Blocks (Alaska)BOEM OCS Lease Blocks (Atlantic)BOEM OCS Lease Blocks (Gulf of Mexico)BOEM OCS Lease Blocks (Pacific)NGDAID:Alaska Region: 19 (Outer Continental Shelf Lease Blocks - Alaska Region NAD83)Atlantic Region: 20 (Outer Continental Shelf Lease Blocks - Atlantic Region NAD83)Gulf of Mexico: 21 (Outer Continental Shelf Lease Blocks - Gulf of Mexico Region NAD27)Pacific Region: 22 (Outer Continental Shelf Lease Blocks - Pacific Region - West Coast NAD83)OGC API Features Link: (Outer Continental Shelf Lease Blocks - OGC Features) copy this link to embed it in OGC Compliant viewersFor more information: Maps and GIS DataFor feedback please contact: Esri_US_Federal_Data@esri.comNGDA Theme CommunityThis data set is part of the NGDA Cadastre Theme Community. Per the Federal Geospatial Data Committee (FGDC), Cadastre is defined as the "past, current, and future rights and interests in real property including the spatial information necessary to describe geographic extents. Rights and interests are benefits or enjoyment in real property that can be conveyed, transferred, or otherwise allocated to another for economic remuneration. Rights and interests are recorded in land record documents. The spatial information necessary to describe geographic extents includes surveys and legal description frameworks such as the Public Land Survey System, as well as parcel-by-parcel surveys and descriptions. Does not include federal government or military facilities."For other NGDA Content: Esri Federal Datasets

Existing wells drilled for exploration or extraction of oil and/or gas products. Additional information includes the lease number, well name, spud date, the well class, surface area/block number, and statistics on well status summary. Only wells found in federal Outer Continental Shelf (OCS) waters are included. Wells information is updated daily. Additional files are available on well completions and well tests. A database of wells is maintained by BSEE.

© MarineCadastre.gov This layer is a component of BOEMRE Layers.

This Map Service contains many of the primary data types created by both the Bureau of Ocean Energy Management (BOEM) and the Bureau of Safety and Environmental Enforcement (BSEE) within the Department of Interior (DOI) for the purpose of managing offshore federal real estate leases for oil, gas, minerals, renewable energy, sand and gravel. These data layers are being made available as REST mapping services for the purpose of web viewing and map overlay viewing in GIS systems. Due to re-projection issues which occur when converting multiple UTM zone data to a single national or regional projected space, and line type changes that occur when converting from UTM to geographic projections, these data layers should not be used for official or legal purposes. Only the original data found within BOEM/BSEE’s official internal database, federal register notices or official paper or pdf map products may be considered as the official information or mapping products used by BOEM or BSEE. A variety of data layers are represented within this REST service are described further below. These and other cadastre information the BOEM and BSEE produces are generated in accordance with 30 Code of Federal Regulations (CFR) 256.8 to support Federal land ownership and mineral resource management.

For more information – Contact: Branch Chief, Mapping and Boundary Branch, BOEM, 381 Elden Street, Herndon, VA 20170. Telephone (703) 787-1312; Email: mapping.boundary.branch@boem.gov

The REST services for National Level Data can be found here: http://gis.boemre.gov/arcgis/rest/services/BOEM_BSEE/MMC_Layers/MapServer

REST services for regional level data can be found by clicking on the region of interest from the following URL: http://gis.boemre.gov/arcgis/rest/services/BOEM_BSEE

Individual Regional Data or in depth metadata for download can be obtained in ESRI Shape file format by clicking on the region of interest from the following URL: http://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Index.aspx

Currently the following layers are available from this REST location:

OCS Drilling Platforms -Locations of structures at and beneath the water surface used for the purpose of exploration and resource extraction. Only platforms in federal Outer Continental Shelf (OCS) waters are included. A database of platforms and rigs is maintained by BSEE.

OCS Oil and Natural Gas Wells -Existing wells drilled for exploration or extraction of oil and/or gas products. Additional information includes the lease number, well name, spud date, the well class, surface area/block number, and statistics on well status summary. Only wells found in federal Outer Continental Shelf (OCS) waters are included. Wells information is updated daily. Additional files are available on well completions and well tests. A database of wells is maintained by BSEE.

OCS Oil & Gas Pipelines -This dataset is a compilation of available oil and gas pipeline data and is maintained by BSEE. Pipelines are used to transport and monitor oil and/or gas from wells within the outer continental shelf (OCS) to resource collection locations. Currently, pipelines managed by BSEE are found in Gulf of Mexico and southern California waters.

Unofficial State Lateral Boundaries - The approximate location of the boundary between two states seaward of the coastline and terminating at the Submerged Lands Act Boundary. Because most State boundary locations have not been officially described beyond the coast, are disputed between states or in some cases the coastal land boundary description is not available, these lines serve as an approximation that was used to determine a starting point for creation of BOEM’s OCS Administrative Boundaries. GIS files are not available for this layer due to its unofficial status.

BOEM OCS Administrative Boundaries - Outer Continental Shelf (OCS) Administrative Boundaries Extending from the Submerged Lands Act Boundary seaward to the Limit of the United States OCS (The U.S. 200 nautical mile Limit, or other marine boundary)For additional details please see the January 3, 2006 Federal Register Notice.

BOEM Limit of OCSLA ‘8(g)’ zone - The Outer Continental Shelf Lands Act '8(g) Zone' lies between the Submerged Lands Act (SLA) boundary line and a line projected 3 nautical miles seaward of the SLA boundary line. Within this zone, oil and gas revenues are shared with the coastal state(s). The official version of the ‘8(g)’ Boundaries can only be found on the BOEM Official Protraction Diagrams (OPDs) or Supplemental Official Protraction described below.

Submerged Lands Act Boundary - The SLA boundary defines the seaward limit of a state's submerged lands and the landward boundary of federally managed OCS lands. The official version of the SLA Boundaries can only be found on the BOEM Official Protraction Diagrams (OPDs) or Supplemental Official Protraction Diagrams described below.

Atlantic Wildlife Survey Tracklines(2005-2012) - These data depict tracklines of wildlife surveys conducted in the Mid-Atlantic region since 2005. The tracklines are comprised of aerial and shipboard surveys. These data are intended to be used as a working compendium to inform the diverse number of groups that conduct surveys in the Mid-Atlantic region.The tracklines as depicted in this dataset have been derived from source tracklines and transects. The tracklines have been simplified (modified from their original form) due to the large size of the Mid-Atlantic region and the limited ability to map all areas simultaneously.The tracklines are to be used as a general reference and should not be considered definitive or authoritative. This data can be downloaded from http://www.boem.gov/uploadedFiles/BOEM/Renewable_Energy_Program/Mapping_and_Data/ATL_WILDLIFE_SURVEYS.zip

BOEM OCS Protraction Diagrams & Leasing Maps - This data set contains a national scale spatial footprint of the outer boundaries of the Bureau of Ocean Energy Management’s (BOEM’s) Official Protraction Diagrams (OPDs) and Leasing Maps (LMs). It is updated as needed. OPDs and LMs are mapping products produced and used by the BOEM to delimit areas available for potential offshore mineral leases, determine the State/Federal offshore boundaries, and determine the limits of revenue sharing and other boundaries to be considered for leasing offshore waters. This dataset shows only the outline of the maps that are available from BOEM.Only the most recently published paper or pdf versions of the OPDs or LMs should be used for official or legal purposes. The pdf maps can be found by going to the following link and selecting the appropriate region of interest. http://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Index.aspx Both OPDs and LMs are further subdivided into individual Outer Continental Shelf(OCS) blocks which are available as a separate layer. Some OCS blocks that also contain other boundary information are known as Supplemental Official Block Diagrams (SOBDs.) Further information on the historic development of OPD's can be found in OCS Report MMS 99-0006: Boundary Development on the Outer Continental Shelf: http://www.boemre.gov/itd/pubs/1999/99-0006.PDF Also see the metadata for each of the individual GIS data layers available for download. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs), serve as the legal definition for BOEM offshore boundary coordinates and area descriptions.

BOEM OCS Lease Blocks - Outer Continental Shelf (OCS) lease blocks serve as the legal definition for BOEM offshore boundary coordinates used to define small geographic areas within an Official Protraction Diagram (OPD) for leasing and administrative purposes. OCS blocks relate back to

This data set contains Supplemental Official OCS Block Diagram (SOBD) images in Adobe pdf format for areas within the BOEM Gulf of Mexico Region. Each SOBD describes a single block within an Official Protraction Diagram (OPD) or Leasing Map (LM) and shows the lines (Submerged Lands Act, Limit of '8(g) Zone', maritime boundaries and/or marine sanctuaries) which occur within that block and divide it into different areas. The SOBD contains additional coordinates and area calculations for an individual block. These data are scanned images of the official paper SOBD's produced by the BOEM. Note that not all OPDs have boundaries cutting through them, so not all OPDs will have SOBDs generated for them. All current leasing activities will be done using the most current SOBDs. Historical (outdated) SOBDs can be obtained by contacting the Geospatial Services Division. Also see the metadata for each of the individual GIS files used to create these SOBDs. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs), serve as the legal definition for BOEM offshore boundary coordinates and area descriptions. Further information on the historic development of OPD's can be found in OCS Report BOEM 99-0006: Boundary Development on the Outer Continental Shelf: https://www.boem.gov/uploadedFiles/BOEM/Oil_and_Gas_Energy_Program/Mapping_and_Data/99-0006.pdf

These data show the locations for oil and gas platforms located in the state and federal waters of the United States. Generally, this data set does not show platforms that have been decommissioned through a state or federal Rigs-to-Reefs program; only included herein are structures known to be actively producing hydrocarbon products, or those for which production status could not be verified.Direct data download | MetadataThis item is curated by the MarineCadastre.gov team. Find more information at marinecadastre.gov.

Number sequence of blocks range from 1042 (Northern CA) to 1032 (Southern CA). These blocks were digitized for a California Department of Fish and Wildlife (CDFW) commercial landings database. The original offshore blocks maps were georeferenced to known ocean locations and coastline. The blocks are primarily used to report fishing in offshore waters. Attributes:Block_ID: Contains the 4-digit number used to ID the large offshore commercial fishing block.

This part of DS 781 presents the seafloor-character map Offshore of Point Reyes, California (raster data file is included in "SFC_PointReyes.zip," which is accessible from https://res1pubsd-o-tusgsd-o-tgov.vcapture.xyz/ds/781/OffshorePointReyes/data_catalog_PointReyes.html). These data accompany the pamphlet and map sheets of Watt, J.T., Dartnell, P., Golden, N.E., Greene, H.G., Erdey, M.D., Cochrane, G.R., Johnson, S.Y., Hartwell, S.R., Kvitek, R.G., Manson, M.W., Endris, C.A., Dieter, B.E., Sliter, R.W., Krigsman, L.M., Lowe, E.N., and Chin, J.L. (J.T. Watt and S.A. Cochran, eds.), 2015, California State Waters Map Series—Offshore of Point Reyes, California: U.S. Geological Survey Open-File Report 2015–1114, pamphlet 39 p., 10 sheets, scale 1:24,000, https://res1doid-o-torg.vcapture.xyz/10.3133/ofr20151114. This raster-format seafloor-character map shows four substrate classes offshore of Point Reyes, California. The substrate classes mapped in this area have been further divided into the following California Marine Life Protection Act depth zones and slope classes: Depth Zone 2 (intertidal to 30 m), Depth Zone 3 (30 to 100 m), Slope Class 1 (0 degrees - 5 degrees), and Slope Class 2 (5 degrees - 30 degrees). Depth Zone 1 (intertidal), Depth Zone 4 (100 to 200 m), Depth Zone 5 (greater than 200 m), and Slope Classes 3-4 (greater than 30 degrees) are not present in the region covered by this block. The map is created using a supervised classification method described by Cochrane (2008). References Cited: California Department of Fish and Game, 2008, California Marine Life Protection Act master plan for marine protected areas; Revised draft: California Department of Fish and Game, accessed April 5 2011, at http://www.dfg.ca.gov/mlpa/masterplan.asp. Cochrane, G.R., 2008, Video-supervised classification of sonar data for mapping seafloor habitat, in Reynolds, J.R., and Greene, H.G., eds., Marine habitat mapping technology for Alaska: Fairbanks, University of Alaska, Alaska Sea Grant College Program, p. 185-194, accessed April 5, 2011, at http://doc.nprb.org/web/research/research%20pubs/615_habitat_mapping_workshop/Individual%20Chapters%20High-Res/Ch13%20Cochrane.pdf. Sappington, J.M., Longshore, K.M., and Thompson, D.B., 2007, Quantifying landscape ruggedness for animal habitat analysis--A case study using bighorn sheep in the Mojave Desert: Journal of Wildlife Management, v. 71, p. 1419-1426.

This file is based on the BOEM - Geospatial Services Divisionâs Official Protraction Diagram (OPD) and Leasing Maps (LM). The OPDs and LMs and Supplemental Official Block Diagrams (SOBDs) serve as the legal definition for BOEM offshore boundary coordinates and area descriptions. OPDs are numbered using the United Nations International Map of the World Numbering System, and are generally named for land or hydrographic features contained within the limits of the diagram. The use of OPDs and LMs makes it easier to refer to individual blocks within a region or planning area. Leasing Maps are part of an older system still in use in the Gulf of Mexico. OPDs were built where existing oil and gas leases, at the time, had not yet occurred and where LMs had not yet been established. This data set contains Official Protraction Diagram (OPD) and Leasing Map (LM) outlines in ESRI shape file formats for the BOEM Gulf of Mexico Region. In order to produce a file containing all the OPDs in a region â Official UTM OPDs and State Plane projected LM outlines were re-projected to basic geographic NAD27 unprojected space in order to create a continuous file. Because GIS projection and topology functions can change or generalize coordinates, these GIS files are NOT an OFFICIAL record for the exact OPD or LM boundaries. Only the official projected paper OPD or LM or a digital image (pdf) of them serves as OFFICIAL records. These can be found at the following location: https://www.boem.gov/Official-Protraction-Diagrams.

This part of DS 781 presents the seafloor-character map Offshore of Bodega Head, California (raster data file is included in "SeafloorCharacter_BodegaHead.zip," which is accessible from https://pubs.usgs.gov/ds/781/OffshoreBodegaHead/data_catalog_OffshoreBodegaHead.html. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Golden, N.E., Hartwell, S.R., Erdey, M.D., Greene, H.G., Cochrane, G.R., Kvitek, R.G., Manson, M.W., Endris, C.A., Dieter, B.E., Watt, J.T., Krigsman, L.M., Sliter, R.W., Lowe, E.N., and Chin, J.L. (S.Y. Johnson and S.A. Cochran, eds.), 2015, California State Waters Map Series—Offshore of Bodega Head, California: U.S. Geological Survey Open-File Report 2015–1140, pamphlet 39 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/ofr20151140. This raster-format seafloor-character map shows four substrate classes offshore of Bodega Head, California. The substrate classes mapped in this area have been further divided into the following California Marine Life Protection Act depth zones and slope classes: Depth Zone 2 (intertidal to 30 m), Depth Zone 3 (30 to 100 m), Slope Class 1 (0 degrees - 5 degrees), and Slope Class 2 (5 degrees - 30 degrees). Depth Zone 1 (intertidal), Depth Zone 4 (100 to 200 m), Depth Zone 5 (greater than 200 m), and Slopes Classes 3-4 (greater than 30 degrees) are not present in the region covered by this block. The map is created using a supervised classification method described by Cochrane (2008). References Cited: California Department of Fish and Game, 2008, California Marine Life Protection Act master plan for marine protected areas; Revised draft: California Department of Fish and Game, accessed April 5 2011, at http://www.dfg.ca.gov/mlpa/masterplan.asp. Cochrane, G.R., 2008, Video-supervised classification of sonar data for mapping seafloor habitat, in Reynolds, J.R., and Greene, H.G., eds., Marine habitat mapping technology for Alaska: Fairbanks, University of Alaska, Alaska Sea Grant College Program, p. 185-194, accessed April 5, 2011, at http://doc.nprb.org/web/research/research%20pubs/615_habitat_mapping_workshop/Individual%20Chapters%20High-Res/Ch13%20Cochrane.pdf. Sappington, J.M., Longshore, K.M., and Thompson, D.B., 2007, Quantifying landscape ruggedness for animal habitat analysis--A case study using bighorn sheep in the Mojave Desert: Journal of Wildlife Management, v. 71, p. 1419-1426.

description: This part of DS 781 presents data for faults for the geologic and geomorphic map of the Offshore of Salt Point map area, California. The vector data file is included in "Faults_OffshoreSaltPoint.zip," which is accessible from http://pubs.usgs.gov/ds/781/OffshoreSaltPoint/data_catalog_OffshoreSaltPoint.html. The onshore part of the Offshore of Salt Point map area is cut by the northwest-trending San Andreas Fault, the right-lateral transform boundary between the North American and Pacific tectonic plates. The San Andreas extends extends into the offshore about 5 km south of the map area near Fort Ross, and about 50 km north of the map area on the east flank of Point Arena. The coast between Fort Ross and Point Arena, the northwesternmost exposed section west of the San Andreas Fault, is known as the "Gualala Block" (fig. 1) on the basis of its distinctive geology, which has been widely used to develop paleogeographic reconstructions of coastal California that restore as much as 150 to 180 km of right-lateral slip on the combined San Andreas and San Gregorio Fault systems (see, for example, Wentworth, (1968); Wentworth and others (1998); Jachens and others (1998); Dickinson and others (2005); Burnham (2009). The Gualala Block is underlain by a thick (as much as 9 to 11 km, in aggregate), discontinuous Upper Cretaceous to Miocene stratigraphic section (summarized in Wentworth and others, 1998), however only the Eocene and Paleocene German Rancho Formation (unit Tgr) is exposed onshore and is inferred to form seafloor bedrock outcrops in the Offshore of Salt Point map area. The German Rancho Formation consists of sandstone, mudstone, and conglomerate interpreted as deep-water, submarine-fan deposits. The western boundary of the Gualala Block lies offshore. Using seismic-reflection data, McCulloch (1987; his fig. 14) mapped a shore-parallel fault about 3 to 5 km offshore, which Dickinson and others (2005) subsequently named the Gualala Fault. Jachens and others (1998) evaluated aeromagnetic and gravity data across this zone and modeled this structure as a steep fault within the Salinian basement block, characterized by 3 to 5 km of right-lateral offset. In contrast, Dickinson and others (2005) consider the Gualala fault a Late Miocene strand of the San Andreas fault, separating Salinian and Franciscan basement rocks, with minimum right-lateral slip of 70 km. Our analysis of deeper industry seismic-reflection data within California State Waters shows the Gualala fault as a steep, northeast-dipping structure. Shallower seismic-reflection crossing the Gualala fault reveal a thick late(?) Pleistocene section characterized by recent faulting and gentle asymmetric folding. Hence, the Gualala fault appears to be a recently active "blind" structure that has deformed young sediments. Our mapping also documents a more nearshore zone of deformation that we refer to as the "east Gualala deformation zone." This zone extends through the central and southern parts of the Offshore of Salt Point map area and is similarly charcterized by steep faults and gentle folds that deform inferred late Pleistocene strata. This section of the San Andreas Fault onland has an estimated slip rate of about 17 to 25 mm/yr (Bryant and Lundberg, 2002). The devastating Great 1906 California earthquake (M 7.8) is thought to have nucleated on the San Andreas Fault about 100 kilometers south of this map area offshore of San Francisco (e.g., Bolt, 1968; Lomax, 2005), with the rupture extending northward through the onshore part of the Offshore of Salt Point map area to the south flank of Cape Mendocino (Lawson, 1908; Brown and Wolfe, 1972). Emergent marine terraces along the coast in the Offshore of Salt Point map area record recent contractional deformation associated with the San Andreas Fault system. Prentice and Kelson (2006) reported uplift rates of 0.3 to 0.6 mm/yr for a nearby late Pleistocene terrace (exposed at Fort Ross, about 5 km south of the map area) and this recent uplift must also have affected the nearshore and inner shelf, at least as far west as the Gualala fault. Faults were primarily mapped by interpretation of seismic reflection profile data (see field activity S-8-09-NC). The seismic reflection profiles were collected between 2007 and 2010. References Cited Bolt, B.A., 1968, The focus of the 1906 California earthquake: Bulletin of the Seismological Society of America, v. 58, p. 457-471. Brown, R.D., Jr., and Wolfe, E.W., 1972, Map showing recently active breaks along the San Andreas Fault between Point Delgada and Bolinas Bay, California: U.S. Geological Survey Miscellaneous Investigations Map I-692, scale 1:24,000. Bryant, W.A., and Lundberg, M.M., compilers, 2002, Fault number 1b, San Andreas fault zone, North Coast section, in Quaternary fault and fold database of the United States: U.S. Geological Survey website, accessed April 4, 2013 at http://earthquakes.usgs.gov/hazards/qfaults. Burnham, K., 2009, Predictive model of San Andreas Fault system paleogeography, Late Cretaceous to early Miocene, derived from detailed multidisciplinary conglomerate correlations: Tectonophysics 464, p. 195-208. Dickinson, W.R., Ducea, M., Rosenberg, L.I., Greene, H.G., Graham, S.A., Clark, J.C., Weber, G.E., Kidder, S., Ernst, W.G., and Brabb, E.E., 2005, Net dextral slip, Neogene San Gregorio-Hosgri Fault Zone, coastal California: Geologic evidence and tectonic implications: Geological Society of America Special Paper 391, 43 p. Jachens, R.C., Wentworth, C.M., and McLaughlin, R.J., 1998, Pre-San Andreas location of the Gualala Block inferred from magnetic and gravity anomalies, in Elder, W.P., ed., Geology and tectonics of the Gualala block, northern California: Pacific Section, Society of Economic Paleontologists and Mineralogists, Book 84, p. 27-53. Lawson, A.C., ed., 1908, The California earthquake of April 18, 1906, Report of the State Earthquake Investigation Commission: Carnegie Institution of Washington Publication 87, v. 1, 1451 p. and atlas. Lomax, A., 2005, A reanalysis of the hypocentral location and related observations for the Great 1906 California earthquake: Bulletin of the Seismological Society of America, v. 95, p. 861-877. McCulloch, D.S., 1987, Regional geology and hydrocarbon potential of offshore central California, in Scholl, D.W., Grantz, A., and Vedder, J.G., eds., Geology and Resource Potential of the Continental Margin of Western North America and Adjacent Oceans€”Beaufort Sea to Baja California: Houston, Texas, Circum-Pacific Council for Energy and Mineral Resources, Earth Science Series, v. 6., p. 353-401. Prentice, C.S., and Kelson, K.I., 2006, The San Andreas fault in Sonoma and Mendocino counties, in Prentice, C.S., Scotchmoor, J.G., Moores, E.M., and Kiland, J.P., eds., 1906 San Francisco Earthquake Centennial Field Guides: Field trips associated with the 100th Anniversary Conference, 18-23 April 2006, San Francisco, California: Geological Society of America Field Guide 7, p. 127-156, Wentworth, C.M., 1968, Upper Cretaceous and lower Tertiary strata near Gualala, California, and inferred large right slip on the San Andreas fault, in Dickinson, W.R., and Grantz, A., eds. Proceedings of conference on geologic problems of San Andreas fault system: Stanford University Publications, Geological Sciences, v. 11, p. 130-143. Wentworth, C.M., Jones, D.L., and Brabb, E.E., 1998, Geology and regional correlation of the Cretaceous and Paleogene rocks of the Gualala block, California, in Elder, W.P., ed., Geology and tectonics of the Gualala block, northern California: Pacific Section, Society of Economic Paleontologists and Mineralogists, Book 84, p. 3-26.; abstract: This part of DS 781 presents data for faults for the geologic and geomorphic map of the Offshore of Salt Point map area, California. The vector data file is included in "Faults_OffshoreSaltPoint.zip," which is accessible from http://pubs.usgs.gov/ds/781/OffshoreSaltPoint/data_catalog_OffshoreSaltPoint.html. The onshore part of the Offshore of Salt Point map area is cut by the northwest-trending San Andreas Fault, the right-lateral transform boundary between the North American and Pacific tectonic plates. The San Andreas extends extends into the offshore about 5 km south of the map area near Fort Ross, and about 50 km north of the map area on the east flank of Point Arena. The coast between Fort Ross and Point Arena, the northwesternmost exposed section west of the San Andreas Fault, is known as the "Gualala Block" (fig. 1) on the basis of its distinctive geology, which has been widely used to develop paleogeographic reconstructions of coastal California that restore as much as 150 to 180 km of right-lateral slip on the combined San Andreas and San Gregorio Fault systems (see, for example, Wentworth, (1968); Wentworth and others (1998); Jachens and others (1998); Dickinson and others (2005); Burnham (2009). The Gualala Block is underlain by a thick (as much as 9 to 11 km, in aggregate), discontinuous Upper Cretaceous to Miocene stratigraphic section (summarized in Wentworth and others, 1998), however only the Eocene and Paleocene German Rancho Formation (unit Tgr) is exposed onshore and is inferred to form seafloor bedrock outcrops in the Offshore of Salt Point map area. The German Rancho Formation consists of sandstone, mudstone, and conglomerate interpreted as deep-water, submarine-fan deposits. The western boundary of the Gualala Block lies offshore. Using seismic-reflection data, McCulloch (1987; his fig. 14) mapped a shore-parallel fault about 3 to 5 km offshore, which Dickinson and others (2005) subsequently named the Gualala Fault. Jachens and others (1998) evaluated aeromagnetic and gravity data across this zone and modeled this structure as a steep fault within the Salinian basement block, characterized by 3 to 5 km of right-lateral offset. In contrast, Dickinson and others (2005) consider the Gualala fault a Late Miocene strand of the

This Map Service contains many of the primary data types created by both the Bureau of Ocean Energy Management (BOEM) and the Bureau of Safety and Environmental Enforcement (BSEE) within the Department of Interior (DOI) for the purpose of managing offshore federal real estate leases for oil, gas, minerals, renewable energy, sand and gravel. These data layers are being made available as REST mapping services for the purpose of web viewing and map overlay viewing in GIS systems. Due to re-projection issues which occur when converting multiple UTM zone data to a single national or regional projected space, and line type changes that occur when converting from UTM to geographic projections, these data layers should not be used for official or legal purposes. Only the original data found within BOEM/BSEE’s official internal database, federal register notices or official paper or pdf map products may be considered as the official information or mapping products used by BOEM or BSEE. A variety of data layers are represented within this REST service are described further below. These and other cadastre information the BOEM and BSEE produces are generated in accordance with 30 Code of Federal Regulations (CFR) 256.8 to support Federal land ownership and mineral resource management.For more information – Contact: Branch Chief, Mapping and Boundary Branch, BOEM, 381 Elden Street, Herndon, VA 20170. Telephone (703) 787-1312; Email: mapping.boundary.branch@boem.govThe REST services for National Level Data can be found here: https://gis.boem.gov/arcgis/rest/services/BOEM_BSEE/MMC_Layers/MapServerREST services for regional level data can be found by clicking on the region of interest from the following URL: https://gis.boem.gov/arcgis/rest/services/BOEM_BSEEIndividual Regional Data or in depth metadata for download can be obtained in ESRI Shape file format by clicking on the region of interest from the following URL: https://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Index.aspxCurrently the following layers are available from this REST location:OCS Drilling Platforms -Locations of structures at and beneath the water surface used for the purpose of exploration and resource extraction. Only platforms in federal Outer Continental Shelf (OCS) waters are included. A database of platforms and rigs is maintained by BSEE.OCS Oil and Natural Gas Wells -Existing wells drilled for exploration or extraction of oil and/or gas products. Additional information includes the lease number, well name, spud date, the well class, surface area/block number, and statistics on well status summary. Only wells found in federal Outer Continental Shelf (OCS) waters are included. Wells information is updated daily. Additional files are available on well completions and well tests. A database of wells is maintained by BSEE.OCS Oil and Gas Pipelines -This dataset is a compilation of available oil and gas pipeline data and is maintained by BSEE. Pipelines are used to transport and monitor oil and/or gas from wells within the outer continental shelf (OCS) to resource collection locations. Currently, pipelines managed by BSEE are found in Gulf of Mexico and southern California waters. BOEM Limit of OCSLA ‘8(g)’ zone - The Outer Continental Shelf Lands Act '8(g) Zone' lies between the Submerged Lands Act (SLA) boundary line and a line projected 3 nautical miles seaward of the SLA boundary line. Within this zone, oil and gas revenues are shared with the coastal state(s). The official version of the ‘8(g)’ Boundaries can only be found on the BOEM Official Protraction Diagrams (OPDs) or Supplemental Official Protraction described below.Submerged Lands Act Boundary - The SLA boundary defines the seaward limit of a state's submerged lands and the landward boundary of federally managed OCS lands. The official version of the SLA Boundaries can only be found on the BOEM Official Protraction Diagrams (OPDs) or Supplemental Official Protraction Diagrams described below.BOEM OCS Protraction Diagrams & Leasing Maps - This data set contains a national scale spatial footprint of the outer boundaries of the Bureau of Ocean Energy Management’s (BOEM’s) Official Protraction Diagrams (OPDs) and Leasing Maps (LMs). It is updated as needed. OPDs and LMs are mapping products produced and used by the BOEM to delimit areas available for potential offshore mineral leases, determine the State/Federal offshore boundaries, and determine the limits of revenue sharing and other boundaries to be considered for leasing offshore waters. This dataset shows only the outline of the maps that are available from BOEM.Only the most recently published paper or pdf versions of the OPDs or LMs should be used for official or legal purposes. The pdf maps can be found by going to the following link and selecting the appropriate region of interest. https://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Index.aspx Both OPDs and LMs are further subdivided into individual Outer Continental Shelf(OCS) blocks which are available as a separate layer. Some OCS blocks that also contain other boundary information are known as Supplemental Official Block Diagrams (SOBDs.) Further information on the historic development of OPD's can be found in OCS Report MMS 99-0006: Boundary Development on the Outer Continental Shelf: https://www.boemre.gov/itd/pubs/1999/99-0006.PDF Also see the metadata for each of the individual GIS data layers available for download. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs), serve as the legal definition for BOEM offshore boundary coordinates and area descriptions.BOEM OCS Lease Blocks - Outer Continental Shelf (OCS) lease blocks serve as the legal definition for BOEM offshore boundary coordinates used to define small geographic areas within an Official Protraction Diagram (OPD) for leasing and administrative purposes. OCS blocks relate back to individual Official Protraction Diagrams and are not uniquely numbered. Only the most recently published paper or pdf versions of the OPDs or LMs or SOBDs should be used for official or legal purposes. The pdf maps can be found by going to the following link and selecting the appropriate region of interest within the OPD/SOBD table.https://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Index.aspxBOEM Oil and Gas Leases – Blocks that are currently leased from the federal government by industry for the purpose of development of traditional oil or gas energy products and may or may not be actively developed or producing. Leases in state waters are not included in this layer.BOEM Oil and Gas Planning Areas - Planning areas are used to support the 5-Year Oil and Gas Program consisting of a schedule of oil and gas lease sales indicating the size, timing and location of proposed leasing activity the Secretary of Interior determines will best meet national energy needs for the five year period following its approval. An area must be included in the current 5-Year Program in order to be offered for leasing. Section 18 of the OCS Lands Act prescribes the major steps involved in developing a 5-Year Program including extensive public comment steps. A 5-Year Program balances energy needs and environmental considerations in accordance with 30 Code of Federal Regulations (CFR) 256.8 to support Federal land ownership and mineral resource management.Seismic Water Bottom Anomalies 230,000 sq km of seismic data interpretation mapping over 32,000 seafloor seismic amplitude anomalies in the Gulf of Mexico using 3-D time-migrated seismic surveys. This mapping program means to understand the distribution of natural hydrocarbon seeps and the related benthic fauna, and to characterize other seafloor features related to the geological framework of the seafloor. These areas show anomalously high or low amplitude response over the background response. Four classes of water bottom anomalies interpreted to be caused by hydrocarbon seepage include High-Positive, Low-Positive/Negative, Pockmarks and Water-Column Gas Plumes. Six classes of water bottom anomalies that are non-seep related include Cretaceous, Cretaceous Talus, Fan, Salt, Slump, and Channels. Please visit https://www.boem.gov/Seismic-Water-Bottom-Anomalies-Map-Gallery/ for more information on these anomaly types.Marine Minerals Significant Sand Resource Blocks - This data set contains OCS block outlines and delineated polygons in ESRI ArcGIS shape file format for the BOEM Gulf of Mexico Region that contain sediment resources and areas of disposal in support of the Marine Minerals Program. Coastal restoration, beach nourishment, and levee reconstruction are crucial to mitigate future coastal erosion, land loss, flooding, and storm damage in the Gulf of Mexico. The success of that long-term effort depends on locating and securing significant quantities of OCS sediment resources that are compatible with the target environments being restored. Offshore sand resources, like upland sources, are extremely scarce where most needed. Additionally, vast areas of these relatively small offshore sand resources are not extractable because of the presence of oil and gas infrastructure, archaeologically sensitive areas, and biologically sensitive areas. Since the use of OCS sediment resources is authorized by the BOEM through its Marine Mineral Program, the bureau is implementing several measures to help safeguard the most significant OCS sediment resources, reduce multiple use conflicts, and minimize interference with oil and gas operations under existing leases or rights-of-way.

This part of DS 781 presents data for folds for the geologic and geomorphic map of the Offshore of Half Moon Bay map area, California. The vector data file is included in "Folds_OffshoreHalfMoonBay.zip," which is accessible from http://pubs.usgs.gov/ds/781/OffshoreHalfMoonBay/data_catalog_OffshoreHalfMoonBay.html. The Offshore of Half Moon Bay map area lies about 12 km southwest of the San Andreas Fault, the dominant structure in the distributed, right-lateral, transform boundary between the North American and Pacific plates. The map area straddles the right-lateral San Gregorio Fault, the most important structure west of the San Andreas Fault in this broad zone. The San Gregorio is part of fault system that occurs predominantly in the offshore, extending about 400 km from Point Conception on the south to Bolinas and Point Reyes on the north (Dickinson and others, 2005), intersecting land at a few coastal promontories. In the Offshore of Half Moon Bay map area, the San Gregorio Fault forms a distributed shear zone about 2 to 4.5 km wide that includes two primary diverging fault strands. The eastern strand (also known as the Seal Cove Fault or Coastways Fault) roughly parallels the shoreline, lies onshore for about 3 km at Pillar Point, and locally forms the boundary between outcrops of Cretaceous grantic rocks to the east and Purisima Formation to the west. The western strand (also known as the Frijoles Fault) lies entirely offshore and forms a boundary between the Purisima Formation on the east and undifferentiated Cretaceous and (or) Tertiary rocks (Pigeon Point Formation?) of the Pigeon Point structural block (McCulloch, 1987) on the west. The Pigeon Point block forms a northwest-trending bedrock ridge that extends offshore for about 30 km from Pescadero Point and forms the northwest boundary of the outer Santa Cruz Basin (McCulloch, 1987). Cumulative lateral slip on the San Gregorio Fault zone is thought to range from 4 to 10 mm/yr in this region (U.S. Geological Survey, 2010). Bathymetric (Bathymetry--Offshore Half Moon Bay, California, DS 781) and seismic-reflection data (see field activity S-15-10-NC) reveal that the offshore outcrops of the Purisima Formation between the eastern and western strands of the San Gregorio Fault Zone are spectacularly folded, faulted and rotated by the strike-slip motion and drag along the faults. The entire map area lies along strike with the young, high topography of the Santa Cruz Mountains and Coast Ranges. This regional uplift has been linked to a northwest transpressive bend in the San Andreas Fault (for example, Zoback and others, 1999). Uplift of nearby marine terraces at rates up to 0.44 mm/yr confirms that this uplift includes the coastal zone (Weber and others, 1995). Folds were primarily mapped by interpretation of seismic reflection profile data (see field activity S-15-10-NC). The seismic reflection profiles were collected between 2007 and 2010. References Cited Dickinson, W.R., Ducea, M., Rosenberg, L.I., Greene, H.G., Graham, S.A., Clark, J.C., Weber, G.E., Kidder, S., Ernst, W.G., and Brabb, E.E., 2005, Net dextral slip, Neogene San Gregorio-Hosgri fault zone, coastal California: Geologic evidence and tectonic implications: Geological Society of America Special Paper 391, 43 p. McCulloch, D.S., 1987, Regional geology and hydrocarbon potential of offshore Central California, in Scholl, D.W., Grantz, A., and Vedder, J.G., eds., Geology and resource potential of the continental margin of Western North America and adjacent ocean basins - Beaufort Sea to Baja California: Circum-Pacific Council for Energy and Mineral Resources Earth Science Series, v. 6, p. 353-401. U.S. Geological Survey and California Geological Survey, 2010, Quaternary fault and fold database for the United States, accessed April 5, 2012, from USGS website: http://earthquake.usgs.gov/hazards/qfaults/. Weber, G.E., Nolan, J.M., and Zinn, E.N., 1995, Determination of late Pleistocene-Holocene slip rates along the San Gregorio fault zone, San Mateo and Santa Cruz counties, California: Final Technical Report, National Earthquake Hazard Reduction Program, Contract No. 1434-93-G-2336, 70 p., 4 map sheets. Zoback, M.L., Jachens, R.C., and Olson, J.A., 1999, Abrupt along-strike change in tectonic style: San Andreas fault zone, San Francisco Peninsula: Journal of Geophysical Research, v. 104 (B5), p. 10,719-10,742.

MetadataThese data represent the offshore wind leases within the U.S. Outer Continental Shelf (OCS) - federally managed waters within the U.S. Exclusive Economic Zone (EEZ) - managed by the Bureau of Ocean Energy Management. State leases are managed by individual state leasing authorities. The data show Individual blocks and sub-blocks, commercial, research, and right of way lease areas. Leases are considered provisional after auction, prior to signatures from BOEM and the Lessee.

The Mapping & Boundary Branch performs mathematical offshore boundary location computations and prepares Official Protraction Diagrams (OPDs), and Supplemental Official OCS Block Diagrams (SOBDs) depicting OCS Block information, the Submerged Lands Act Boundary (aka - State Seaward Boundary), Limit of "8(g) Zone", the Continental Shelf Boundary (CSB) which marks the limit of U.S. jurisdiction for offshore mineral development, and corresponding area measurements. This data set below contains Protraction Diagram (OPD) outlines in ESRI shapefile format from BOEM (2006). At higher latitudes (48-75 degrees) OPDs are 3 degrees wide. OPDs are further subdivided into blocks that are 4800 x 4800 meters on a UTM grid (but this file does not include those blocks - only the OPD outline). Where the OPD hits the UTM zone boundary, that zone boundary will be a geodesic line - which will appear slightly curved on the UTM grid. OPDs are numbered using the United Nations International Map of the World Numbering System, and are generally named for land or hydrographic features contained within the limits of the diagram. Note: The precise coordinates of a GIS file can be altered slightly by various GIS functions. For that reason, these GIS files are not an Official Record for BOEM offshore boundaries. Only the coordinates shown on Official OPDs, CBDs, and SOBDs constitute an Official Record for offshore coordinate values. Further information on OPD's can be found in OCS Report MMS 99-0006 and the website reference below.