U.S. Government Workshttps://www.usa.gov/government-works
License information was derived automatically
The 2006 OSIP digital LiDAR data was collected during the months of March and May (leaf-off conditions). The LiDAR covers the entire land area of the northern tier of Ohio (approximately 23,442 square miles. The LiDAR is delivered in county sets, consisting of 5,000' x 5,000' size tiles. Where the State borders other states (land only), the entire border of the State is buffered by at least 1,000-feet. Along the Lake Erie Shoreline ortho coverage is buffered beyond the shoreline a minimum distance of 2,500-feet. Adjacent flight lines overlap by an average of 30 percent. LiDAR was collected with Leica ALS50 digital LiDAR Systems. The file naming convention is as follows: Nxxxxyyy = 5,000' x 5,000' LiDAR Tiles located in the Ohio State Plane Coordinate System (North Zone). Sxxxxyyy = 5,000' x 5,000' LiDAR Tiles located in the Ohio State Plane Coordinate System (South Zone). Please note that xxxx and yyy represent the easting and northing coordinates (respectively) in state plane feet, The naming convention for each LiDAR tile is based upon (the bottom most-left pixel). The LiDAR was provided in LAS Format containing the above ground and bare-earth LiDAR features. Ownership of the data products resides with the State of Ohio. Orthophotography and ancillary data products produced through this contract are public domain data. LiDAR was acquired Statewide to provide a solid and very accurate base to use during the image rectification process. This same LiDAR can be supplemented with 3D breaklines to generate 2-foot and/or 4/5-foot contours. The average post spacing between LiDAR points is 7-feet. The flying altitude was 7,300-feet AMT, with the targeted flying speed at 170 knots.
The 2006 OSIP digital LiDAR data was collected during the months of March and May (leaf-off conditions). The LiDAR covers the entire land area of the northern tier of Ohio (approximately 23,442 square miles. The LiDAR is delivered in county sets, consisting of 5,000' x 5,000' size tiles. Where the State borders other states (land only), the entire border of the State is buffered by at least 1,000-feet. Along the Lake Erie Shoreline ortho coverage is buffered beyond the shoreline a minimum distance of 2,500-feet. Adjacent flight lines overlap by an average of 30 percent. LiDAR was collected with Leica ALS50 digital LiDAR Systems. The file naming convention is as follows: Nxxxxyyy = 5,000' x 5,000' LiDAR Tiles located in the Ohio State Plane Coordinate System (North Zone). Sxxxxyyy = 5,000' x 5,000' LiDAR Tiles located in the Ohio State Plane Coordinate System (South Zone). Please note that xxxx and yyy represent the easting and northing coordinates (respectively) in state plane feet, The naming convention for each LiDAR tile is based upon (the bottom most-left pixel). The LiDAR was provided in LAS Format containing the above ground and bare-earth LiDAR features. Ownership of the data products resides with the State of Ohio. Orthophotography and ancillary data products produced through this contract are public domain data. LiDAR was acquired Statewide to provide a solid and very accurate base to use during the image rectification process. This same LiDAR can be supplemented with 3D breaklines to generate 2-foot and/or 4/5-foot contours. The average post spacing between LiDAR points is 7-feet. The flying altitude was 7,300-feet AMT, with the targeted flying speed at 170 knots.
2017 Aerial Photography for Cuyahoga County, Ohio. Flown Spring 2017 as part of the State of Ohio's Statewide Imagery Program. See the OGRIP OSIP III website for more information: http://ogrip.oit.ohio.gov/ProjectsInitiatives/StatewideImagery.aspx
Address grid, Zipcodes and OSIP Index for Pickaway County Ohio
Address Grid mapped in-house based on Tax Map Office information.
OSIP Index from OGRIP
Zipcodes
Please Contact: Pickaway County GIS Dept 124 W Franklin St. Circleville, Ohio 43113 Phone: 740-474-5823 Fax: 740-477-8265 Email: jgillow@pickaway.org Website: https://www.pickaway.org/GIS_files/GIS.htm
The 2006 OSIP bare-earth Digital Elevation Model (DEM) was derived from digital LiDAR data was collected during the months of March and May (leaf-off conditions). The DEM data covers the entire land area of the northern tier of Ohio (approximately 23,442 square miles. The DEM is delivered in county sets, consisting of 5,000' x 5,000' size tiles that correspond to the tile sizes for the OSIP 1FT imagery products. Where the State borders other states (land only), the entire border of the State is buffered by at least 1,000-feet. Along the Lake Erie Shoreline ortho coverage is buffered beyond the shoreline a minimum distance of 2,500-feet. The file naming convention is as follows: Nxxxxyyy = 5,000' x 5,000' Tiles located in the Ohio State Plane Coordinate System (North Zone). Sxxxxyyy = 5,000' x 5,000' Tiles located in the Ohio State Plane Coordinate System (South Zone). Please note that xxxx and yyy represent the easting and northing coordinates (respectively) in state plane feet, The naming convention for each tile is based upon (the bottom most-left pixel). The full county mosaic is an aggregation of the tiles by county. The mosaic is devloped in the Ohio State Plane Coordinate System (North Zone).. The DEM tiles were provided in ESRI ArcINFO GRID raster and ASCII grid formats, with only the LiDAR in LAS Format containing the above ground and bare-earth LiDAR features. Ownership of the data products resides with the State of Ohio. Orthophotography and ancillary data products produced through this contract are public domain data. The LiDAR used to generate the DEM was acquired Statewide to provide a solid and very accurate base to use during the image rectification process. This same LiDAR can be supplemented with 3D breaklines to generate 2-foot and/or 4/5-foot contours. The average post spacing between LiDAR points is 7-feet. The flying altitude was 7,300-feet AMT, with the targeted flying speed at 170 knots.
2 Foot Contours generate from 2006 OSIP DEM LIDAR Data for Pickaway County. The contours are ONLY for Reference and DOES NOT meet National Map Accuracy Standards. For more information contact Pickaway County GIS Dept Pickaway County GIS Office
124 W Franklin Street
Circleville, Ohio 43113
Email: jgillow@pickaway.org
Phone: 740-474-5823
Fax: 740-477-8265
2 Foot Contours – Source Pickaway County – Generated In-house and are based on OSIP 1 DEM 2.5 ft grid data. The contours are ONLY for Reference and DOES NOT meet National Map Accuracy Standards.
Website: https://ogrip.oit.test.ohio.gov/Portals/0/PDFs/OSIP%20Program%20Description.pdf
MIT Licensehttps://opensource.org/licenses/MIT
License information was derived automatically
Download .zipThese files contain the lake boundary data used by the Ohio Division of Wildlife for the construction of lake maps. Lake boundary data was derived by digitizing Ohio Statewide Imagery Program (OSIP-1) data. Additional details on the digitizing process are available on request.
Lake boundary: http://ogrip.oit.ohio.gov/ProjectsInitiatives/StatewideImagery.aspxContact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Wildlife2045 Morse Rd, Bldg G-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov
0.5ft resolution, 3 band RGB color digital orthophotography Fayette County, Ohio mosaic. Collected in the Spring March and April, leaf-off conditions of 2019 as part of OGRIP OSIP 3. Orthoimagery meets ±3.7 feet horizontal accuracy. The information provided is for reference only and subject to independent verification. User assumes all responsibility for its use.
MIT Licensehttps://opensource.org/licenses/MIT
License information was derived automatically
Download .zipThese files contain the lake boundary data used by the Ohio Division of Wildlife for the construction of lake maps. Lake boundary data was derived by digitizing Ohio Statewide Imagery Program (OSIP-1) data. Additional details on the digitizing process are available on request.
Lake boundary: http://ogrip.oit.ohio.gov/ProjectsInitiatives/StatewideImagery.aspxContact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Wildlife2084 Morse Rd, Bldg G-2Columbus, OH, 43268Telephone: 614-265-6501Email: gis.support@dnr.ohio.gov
MIT Licensehttps://opensource.org/licenses/MIT
License information was derived automatically
Download .zipThese files contain the lake boundary data used by the Ohio Division of Wildlife for the construction of lake maps. Lake boundary data was derived by digitizing Ohio Statewide Imagery Program (OSIP-1) data. Additional details on the digitizing process are available on request.
Lake boundary: http://ogrip.oit.ohio.gov/ProjectsInitiatives/StatewideImagery.aspxContact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Wildlife2103 Morse Rd, Bldg G-2Columbus, OH, 43287Telephone: 614-265-6520Email: gis.support@dnr.ohio.gov
MIT Licensehttps://opensource.org/licenses/MIT
License information was derived automatically
Download .zipThese files contain the lake boundary data used by the Ohio Division of Wildlife for the construction of lake maps. Lake boundary data was derived by digitizing Ohio Statewide Imagery Program (OSIP-1) data. Additional details on the digitizing process are available on request.
Lake boundary: http://ogrip.oit.ohio.gov/ProjectsInitiatives/StatewideImagery.aspxContact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Wildlife2045 Morse Rd, Bldg G-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov
MIT Licensehttps://opensource.org/licenses/MIT
License information was derived automatically
Download .zipThese files contain the lake boundary data used by the Ohio Division of Wildlife for the construction of lake maps. Lake boundary data was derived by digitizing Ohio Statewide Imagery Program (OSIP-1) data. Additional details on the digitizing process are available on request.
Lake boundary: http://ogrip.oit.ohio.gov/ProjectsInitiatives/StatewideImagery.aspxContact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Wildlife2045 Morse Rd, Bldg G-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov
MIT Licensehttps://opensource.org/licenses/MIT
License information was derived automatically
Download .zipThese files contain the lake boundary data used by the Ohio Division of Wildlife for the construction of lake maps. Lake boundary data was derived by digitizing Ohio Statewide Imagery Program (OSIP-1) data. Additional details on the digitizing process are available on request.
Lake boundary: http://ogrip.oit.ohio.gov/ProjectsInitiatives/StatewideImagery.aspxContact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Wildlife2045 Morse Rd, Bldg G-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov
MIT Licensehttps://opensource.org/licenses/MIT
License information was derived automatically
Download .zipThese files contain the lake boundary data used by the Ohio Division of Wildlife for the construction of lake maps. Lake boundary data was derived by digitizing Ohio Statewide Imagery Program (OSIP-1) data. Additional details on the digitizing process are available on request.
Lake boundary: http://ogrip.oit.ohio.gov/ProjectsInitiatives/StatewideImagery.aspxContact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Wildlife2100 Morse Rd, Bldg G-2Columbus, OH, 43284Telephone: 614-265-6517Email: gis.support@dnr.ohio.gov
MIT Licensehttps://opensource.org/licenses/MIT
License information was derived automatically
Download .zipThese files contain the lake boundary data used by the Ohio Division of Wildlife for the construction of lake maps. Lake boundary data was derived by digitizing Ohio Statewide Imagery Program (OSIP-1) data. Additional details on the digitizing process are available on request.
Lake boundary: http://ogrip.oit.ohio.gov/ProjectsInitiatives/StatewideImagery.aspxContact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Wildlife2045 Morse Rd, Bldg G-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov
MIT Licensehttps://opensource.org/licenses/MIT
License information was derived automatically
Download .zipThese files contain the lake boundary data used by the Ohio Division of Wildlife for the construction of lake maps. Lake boundary data was derived by digitizing Ohio Statewide Imagery Program (OSIP-1) data. Additional details on the digitizing process are available on request.
Lake boundary: http://ogrip.oit.ohio.gov/ProjectsInitiatives/StatewideImagery.aspxContact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Wildlife2086 Morse Rd, Bldg G-2Columbus, OH, 43270Telephone: 614-265-6503Email: gis.support@dnr.ohio.gov
MIT Licensehttps://opensource.org/licenses/MIT
License information was derived automatically
Download .zipThese files contain the lake boundary data used by the Ohio Division of Wildlife for the construction of lake maps. Lake boundary data was derived by digitizing Ohio Statewide Imagery Program (OSIP-1) data. Additional details on the digitizing process are available on request.
Lake boundary: http://ogrip.oit.ohio.gov/ProjectsInitiatives/StatewideImagery.aspxContact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Wildlife2045 Morse Rd, Bldg G-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov
MIT Licensehttps://opensource.org/licenses/MIT
License information was derived automatically
Download .zipThese files contain the lake boundary data used by the Ohio Division of Wildlife for the construction of lake maps. Lake boundary data was derived by digitizing Ohio Statewide Imagery Program (OSIP-1) data. Additional details on the digitizing process are available on request.
Lake boundary: http://ogrip.oit.ohio.gov/ProjectsInitiatives/StatewideImagery.aspxContact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Wildlife2090 Morse Rd, Bldg G-2Columbus, OH, 43274Telephone: 614-265-6507Email: gis.support@dnr.ohio.gov
MIT Licensehttps://opensource.org/licenses/MIT
License information was derived automatically
Download .zipThese files contain the lake boundary data used by the Ohio Division of Wildlife for the construction of lake maps. Lake boundary data was derived by digitizing Ohio Statewide Imagery Program (OSIP-1) data. Additional details on the digitizing process are available on request.
Lake boundary: http://ogrip.oit.ohio.gov/ProjectsInitiatives/StatewideImagery.aspxContact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Wildlife2045 Morse Rd, Bldg G-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov
MIT Licensehttps://opensource.org/licenses/MIT
License information was derived automatically
Download .zipThese files contain the lake boundary data used by the Ohio Division of Wildlife for the construction of lake maps. Lake boundary data was derived by digitizing Ohio Statewide Imagery Program (OSIP-1) data. Additional details on the digitizing process are available on request.
Lake boundary: http://ogrip.oit.ohio.gov/ProjectsInitiatives/StatewideImagery.aspxContact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Wildlife2045 Morse Rd, Bldg G-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov
U.S. Government Workshttps://www.usa.gov/government-works
License information was derived automatically
The 2006 OSIP digital LiDAR data was collected during the months of March and May (leaf-off conditions). The LiDAR covers the entire land area of the northern tier of Ohio (approximately 23,442 square miles. The LiDAR is delivered in county sets, consisting of 5,000' x 5,000' size tiles. Where the State borders other states (land only), the entire border of the State is buffered by at least 1,000-feet. Along the Lake Erie Shoreline ortho coverage is buffered beyond the shoreline a minimum distance of 2,500-feet. Adjacent flight lines overlap by an average of 30 percent. LiDAR was collected with Leica ALS50 digital LiDAR Systems. The file naming convention is as follows: Nxxxxyyy = 5,000' x 5,000' LiDAR Tiles located in the Ohio State Plane Coordinate System (North Zone). Sxxxxyyy = 5,000' x 5,000' LiDAR Tiles located in the Ohio State Plane Coordinate System (South Zone). Please note that xxxx and yyy represent the easting and northing coordinates (respectively) in state plane feet, The naming convention for each LiDAR tile is based upon (the bottom most-left pixel). The LiDAR was provided in LAS Format containing the above ground and bare-earth LiDAR features. Ownership of the data products resides with the State of Ohio. Orthophotography and ancillary data products produced through this contract are public domain data. LiDAR was acquired Statewide to provide a solid and very accurate base to use during the image rectification process. This same LiDAR can be supplemented with 3D breaklines to generate 2-foot and/or 4/5-foot contours. The average post spacing between LiDAR points is 7-feet. The flying altitude was 7,300-feet AMT, with the targeted flying speed at 170 knots.