Chart and table of population level and growth rate for the state of Ohio from 1900 to 2024.

About this dataset

Context

The dataset tabulates the data for the Ohio County, IN population pyramid, which represents the Ohio County population distribution across age and gender, using estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates. It lists the male and female population for each age group, along with the total population for those age groups. Higher numbers at the bottom of the table suggest population growth, whereas higher numbers at the top indicate declining birth rates. Furthermore, the dataset can be utilized to understand the youth dependency ratio, old-age dependency ratio, total dependency ratio, and potential support ratio.

Key observations

• Youth dependency ratio, which is the number of children aged 0-14 per 100 persons aged 15-64, for Ohio County, IN, is 27.7.
• Old-age dependency ratio, which is the number of persons aged 65 or over per 100 persons aged 15-64, for Ohio County, IN, is 38.0.
• Total dependency ratio for Ohio County, IN is 65.8.
• Potential support ratio, which is the number of youth (working age population) per elderly, for Ohio County, IN is 2.6.

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates.

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group for the Ohio County population analysis. Total expected values are 18 and are define above in the age groups section.
• Population (Male): The male population in the Ohio County for the selected age group is shown in the following column.
• Population (Female): The female population in the Ohio County for the selected age group is shown in the following column.
• Total Population: The total population of the Ohio County for the selected age group is shown in the following column.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Ohio County Population by Age. You can refer the same here

This graph shows the population density in the federal state of Ohio from 1960 to 2018. In 2018, the population density of Ohio stood at 286.1 residents per square mile of land area.

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2020 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census and beyond, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

Resident Population in Ohio was 11883.30400 Thous. of Persons in January of 2024, according to the United States Federal Reserve. Historically, Resident Population in Ohio reached a record high of 11883.30400 in January of 2024 and a record low of 4161.00000 in January of 1900. Trading Economics provides the current actual value, an historical data chart and related indicators for Resident Population in Ohio - last updated from the United States Federal Reserve on July of 2025.

The 2022 cartographic boundary KMLs are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. The cartographic boundary files include both incorporated places (legal entities) and census designated places or CDPs (statistical entities). An incorporated place is established to provide governmental functions for a concentration of people as opposed to a minor civil division (MCD), which generally is created to provide services or administer an area without regard, necessarily, to population. Places always nest within a state, but may extend across county and county subdivision boundaries. An incorporated place usually is a city, town, village, or borough, but can have other legal descriptions. CDPs are delineated for the decennial census as the statistical counterparts of incorporated places. CDPs are delineated to provide data for settled concentrations of population that are identifiable by name, but are not legally incorporated under the laws of the state in which they are located. The boundaries for CDPs often are defined in partnership with state, local, and/or tribal officials and usually coincide with visible features or the boundary of an adjacent incorporated place or another legal entity. CDP boundaries often change from one decennial census to the next with changes in the settlement pattern and development; a CDP with the same name as in an earlier census does not necessarily have the same boundary. The only population/housing size requirement for CDPs is that they must contain some housing and population. The generalized boundaries of most incorporated places in this file are based on those as of January 1, 2022, as reported through the Census Bureau's Boundary and Annexation Survey (BAS). The generalized boundaries of all CDPs are based on those delineated as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2020 Census.

A dataset listing Ohio counties by population for 2024.

The Census Bureau’s urban-rural classification is fundamentally a delineation of geographical areas, identifying both individual urban areas and the rural areas of the nation. The Census Bureau’s urban areas represent densely developed territory, and encompass residential, commercial, and other non-residential urban land uses. To qualify as an urban area, the territory identified according to criteria must have at least 5,000 people or 2,000 housing units. The 2020 Census changed how urban areas are determined from the 2010 criteria. The population requirement was increased to 5,000 people from 2,500 in 2010. This value is now determined by housing unit density instead of population density. Urban areas can now also be defined by the number of housing units present. Finally, the 2020 Census does not distinguish different types of urban areas. Areas are simply urban or rural.This layer was originally downloaded from the US Census Bureau website and clipped to the Stark County boundary. For more information on urban and rural classification and criteria, visit Redefining Urban Areas following the 2020 Census.

This resource is a member of a series. The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2020 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

Resident Population in Ohio County, IN was 5.99600 Thous. of Persons in January of 2024, according to the United States Federal Reserve. Historically, Resident Population in Ohio County, IN reached a record high of 6.08900 in January of 2022 and a record low of 4.28900 in January of 1970. Trading Economics provides the current actual value, an historical data chart and related indicators for Resident Population in Ohio County, IN - last updated from the United States Federal Reserve on July of 2025.

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File/Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Public Use Microdata Areas (PUMAs) are decennial census areas that permit the tabulation and dissemination of Public Use Microdata Sample (PUMS) data, American Community Survey (ACS) data, and data from other census and surveys. For the 2020 Census, the State Data Centers (SDCs) in each state, the District of Columbia, and the Commonwealth of Puerto Rico had the opportunity to delineate PUMAS within their state or statistically equivalent entity. All PUMAs must nest within states and have a minimum population threshold of 100,000 persons. 2020 PUMAs consist of census tracts and cover the entirety of the United States, Puerto Rico and Guam. American Samoa, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands do not contain any 2020 PUMAs because the population is less than the minimum population requirement. Each PUMA is identified by a 5-character numeric census code that may contain leading zeros and a descriptive name. The 2020 PUMAs will appear in the 2022 TIGER/Line Shapefiles.

U.S. Census Bureau QuickFacts statistics for Marietta city, Ohio. QuickFacts data are derived from: Population Estimates, American Community Survey, Census of Population and Housing, Current Population Survey, Small Area Health Insurance Estimates, Small Area Income and Poverty Estimates, State and County Housing Unit Estimates, County Business Patterns, Nonemployer Statistics, Economic Census, Survey of Business Owners, Building Permits.

The 2020 cartographic boundary shapefiles are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2020 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some states and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census and beyond, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

Population Estimate, Total, Hispanic or Latino (5-year estimate) in Ohio County, WV was 664.00000 Persons in January of 2023, according to the United States Federal Reserve. Historically, Population Estimate, Total, Hispanic or Latino (5-year estimate) in Ohio County, WV reached a record high of 664.00000 in January of 2023 and a record low of 319.00000 in January of 2009. Trading Economics provides the current actual value, an historical data chart and related indicators for Population Estimate, Total, Hispanic or Latino (5-year estimate) in Ohio County, WV - last updated from the United States Federal Reserve on July of 2025.

Estimate, Median Age by Sex, Total Population (5-year estimate) in Ohio County, IN was 46.00000 Years of Age in January of 2023, according to the United States Federal Reserve. Historically, Estimate, Median Age by Sex, Total Population (5-year estimate) in Ohio County, IN reached a record high of 47.80000 in January of 2020 and a record low of 39.80000 in January of 2009. Trading Economics provides the current actual value, an historical data chart and related indicators for Estimate, Median Age by Sex, Total Population (5-year estimate) in Ohio County, IN - last updated from the United States Federal Reserve on June of 2025.

Population Estimate, Total, Not Hispanic or Latino, Black or African American Alone (5-year estimate) in Ohio County, KY was 256.00000 Persons in January of 2023, according to the United States Federal Reserve. Historically, Population Estimate, Total, Not Hispanic or Latino, Black or African American Alone (5-year estimate) in Ohio County, KY reached a record high of 377.00000 in January of 2011 and a record low of 189.00000 in January of 2010. Trading Economics provides the current actual value, an historical data chart and related indicators for Population Estimate, Total, Not Hispanic or Latino, Black or African American Alone (5-year estimate) in Ohio County, KY - last updated from the United States Federal Reserve on July of 2025.

Population Estimate, Total, Hispanic or Latino (5-year estimate) in Ohio County, IN was 0.00000 Persons in January of 2023, according to the United States Federal Reserve. Historically, Population Estimate, Total, Hispanic or Latino (5-year estimate) in Ohio County, IN reached a record high of 96.00000 in January of 2013 and a record low of 0.00000 in January of 2015. Trading Economics provides the current actual value, an historical data chart and related indicators for Population Estimate, Total, Hispanic or Latino (5-year estimate) in Ohio County, IN - last updated from the United States Federal Reserve on July of 2025.

Estimate, Median Age by Sex, Total Population (5-year estimate) in Ohio County, KY was 40.90000 Years of Age in January of 2023, according to the United States Federal Reserve. Historically, Estimate, Median Age by Sex, Total Population (5-year estimate) in Ohio County, KY reached a record high of 41.00000 in January of 2022 and a record low of 38.60000 in January of 2009. Trading Economics provides the current actual value, an historical data chart and related indicators for Estimate, Median Age by Sex, Total Population (5-year estimate) in Ohio County, KY - last updated from the United States Federal Reserve on July of 2025.

Population Estimate, Total, Not Hispanic or Latino, Black or African American Alone (5-year estimate) in Ohio County, WV was 1356.00000 Persons in January of 2023, according to the United States Federal Reserve. Historically, Population Estimate, Total, Not Hispanic or Latino, Black or African American Alone (5-year estimate) in Ohio County, WV reached a record high of 1812.00000 in January of 2015 and a record low of 1354.00000 in January of 2021. Trading Economics provides the current actual value, an historical data chart and related indicators for Population Estimate, Total, Not Hispanic or Latino, Black or African American Alone (5-year estimate) in Ohio County, WV - last updated from the United States Federal Reserve on June of 2025.

Population Estimate, Total, Not Hispanic or Latino, White Alone (5-year estimate) in Ohio County, WV was 37802.00000 Persons in January of 2023, according to the United States Federal Reserve. Historically, Population Estimate, Total, Not Hispanic or Latino, White Alone (5-year estimate) in Ohio County, WV reached a record high of 41435.00000 in January of 2010 and a record low of 37802.00000 in January of 2023. Trading Economics provides the current actual value, an historical data chart and related indicators for Population Estimate, Total, Not Hispanic or Latino, White Alone (5-year estimate) in Ohio County, WV - last updated from the United States Federal Reserve on July of 2025.