The locations of wells that have been drilled for oil production, gas or salt resources or for underground storage of hydrocarbons.This data can be used for land use and resource management, emergency management, as well as compliance and enforcement in the petroleum industry. The Data is collected on an on-going basis and maintained in the Ontario Petroleum Data System (OPDS). Additional Documentation Petroleum Well - Data DescriptionPetroleum Well - DocumentationPetroleum Well- User Guide Status
On going: data is being continually updated

Maintenance and Update Frequency

Semi-monthly: data is updated twice a month

Contact Petroleum Operations Section, Ministry of Natural Resources and Forestry, POSrecords@ontario.ca

This map shows the oil and natural gas wells across the United States. Oil and Natural Gas Well: A hole drilled in the earth for the purpose of finding or producing crude oil or natural gas; or producing services related to the production of crude or natural gas. Geographic coverage includes the United States (Alabama, Alaska, Arizona, Arkansas, California, Colorado, Florida, Illinois, Indiana, Kansas, Kentucky, Louisiana, Maryland, Michigan, Mississippi, Missouri, Montana, North Dakota, Nebraska, Nevada, New Mexico, New York, Ohio, Oklahoma, Oregon, Pennsylvania, South Dakota, Tennessee, Texas, Utah, Virginia, Washington, West Virginia, Wyoming) as well Oil and Natural Gas wells in the Canadian provinces of British Columbia and Manitoba that are within 100 miles of the country's border with the United States. According to the Energy Information Administration (EIA) the following states do not have active/producing Oil or Natural Gas Wells: Connecticut, Delaware, District of Columbia, Georgia, Hawaii, Iowa, Idaho, Massachusetts, Maine, Minnesota, North Carolina, New Hampshire, New Jersey, Rhode Island, South Carolina, Vermont, and Wisconsin. Some states do have wells for underground Natural Gas storage facilities where these have been identified they were included. This layer is derived from well data from individual states and provinces and United States Agencies. This layer is complete for the United States but further development of data missing from two Canadian provinces and Mexico is in process. This update release includes an additional 497,036 wells covering Texas. Oil and gas exploration in Texas takes advantage of drilling technology to use a single surface well drilling location to drill multiple bottom hole well connections to extract oil and gas. The addition of Well data from Texas results in the addition of a related table to support this one surface well to many bottom hole connections. This related table provides records for Wells that have more than one bottom hole linked to the surface well. Sourced from the HIFLD Open Data Portal for Energy.

These well locations were derived from historical mine maps known as the WPA, Ksheet, and Hsheet collections. These locations are provided for informational purposes only and should not be sole means of decision making and are in no way a substitute for actual on the ground observation. In 1859, the United States’ first commercial oil well was drilled in Venango County, Pennsylvania. In the 150 years subsequent to this, an unknown number of oil and gas wells have been drilled in the state. A current estimate by the Independent Petroleum Association of America places that number at approximately 325,000. Of those 325,000 wells, over 200,000 are still unaccounted for. As these wells are found and verified, they are cataloged in the Department of Environmental Protection’s (DEP) Abandoned and Orphan Well database to facilitate plugging. There are currently over 8,200 wells listed in this database (2013). With so many unknown oil and gas wells scattered across Pennsylvania and the environmental threats that they pose, identification remains a vital component of DEP’s Oil and Gas Program. Currently, the DEP, Office of Active and Abandoned Mine Operations is involved in many projects dealing with historic and active mine map restoration and geo-referencing. These maps, which vary in age, not only contain information on historic mine locations, but also oil and gas locations. Through collaboration between the Bureau of Mining Programs and the Bureau of Oil and Gas Planning and Program Management, potential oil and gas well locations were assembled using three mine map collections. These collections include the WPA mine map collection, Ksheets collection, and the Hsheets collection. From these sources, over 30,000 potential historic oil and gas well locations were derived. The Bureau of Oil and Gas Planning and Program Management is constantly looking for historic sources to help locate oil and gas wells in the state that remain unaccounted for. This particular dataset was created using georeferenced mine maps of various/unknown accuracy and various/unknown coordinate systems to various base maps, including but not limited to USGS topographic maps and PAMAP aerial photography. The locations were then digitized using the georeferenced mine maps. These locations are provided for informational purposes only and should not be sole means of decision making and are in no way a substitute for actual field observations.

The United States Documented Unplugged Orphaned Oil and Gas Well (DOW) dataset contains 117,672 wells in 27 states. The definition of an orphaned oil or gas well varies across data sources; the dataset includes oil or gas wells where the state indicates that the well is an unplugged orphan, or the following criteria are met: 1) no production for an average of 12 months (6 to 24 months depending on the state), 2) the well is unplugged, 3) there is no responsible party to manage the well for future re-use or for plugging and abandonment, and 4) the location of the well is documented. The dataset includes location coordinates, American Petroleum Institute (API) number, or other identification number, well type, well status, and additional information for each unplugged orphaned well. All data were collected by direct requests to the respective state agency overseeing oil and gas wells or data downloads from their online databases. Location format conversion was performed on wells without coordinate locations using tools provided by the Bureau of Land Management and some state agencies. No other data manipulations were performed to the source data aside from reformatting or the addition of explanatory notes.

The California Department of Conservation, Division of Oil, Gas and Geothermal Resources publishes a GIS feature class of well locations across the state for use by the public. This shapefile is the same as the data displayed in the Division's WellFinder application (http://maps.conservation.ca.gov/doggr/index.html) as of July 6, 2016. This shapefile is provided in geographic coordinates on the North American Datum of 1983. A partial description of the attributes contained in this feature class is listed on the WellFinder application's Help system (see entity and attributes section in this metadata). Geothermal wells have been excluded from this shapefile.The DOGGR Wells layer in WellFinder is also available as a WFS service at http://spatialservices.conservation.ca.gov/arcgis/rest/services/DOMS/DOMS_Wells/MapServer/WFSServer?/.Well Attributes: API Number, Well Number, Well Status, GIS Symbol, Operator Code, Operator Name, Lease Name, Field Name, Area Name, District, County, Section, Township, Range, Base Meridian, Latitude, Longitude, Elevation, Total Depth, Redrill Footage, Redrill Cancel Flag, Location Description, Comments, GIS Source Code, Dry Hole, Confidential Well, Directionally Drilled, Hydraulically Fractured, BLM Well, EPA Well, Spud Date, Completion Date, Abandoned Date

© Division of Oil, Gas and Geothermal Resources

This layer is a component of Geology & Geography.

This indicator provides information about the geographic locations of oil and gas wells. All records include operator name, field name, latitude, and longitude coordinates, well type, and well status.Oil and gas wells are located throughout Los Angeles County, including in residential areas. Living or working near oil and gas wells can lead to negative health effects. Additionally, oil and gas well activity can generate significant noise and vibrations in a community. Although Los Angeles County has approved a ban on all new oil and gas wells, with plans to phase out drilling over the next 20 years, potential hazards may remain. Regulation of existing oil and gas wells (both active and inactive) is critical to protecting public safety and the environment.For more information about the Community Health Profiles Data Initiative, please see the initiative homepage.

The number of oil and gas wells in Brazil has been mostly decreasing in recent years. In 2024, the number of wells in the country amounted to *****, down from over ***** wells in 2014. More than ** percent of wells were located onshore. Brazil's offshore crude oil production stands at more than *** billion barrels.

This online map represents oil and gas wells in the CalGEM Well Statewide Tracking and Reporting System, or WellSTAR. Wells are displayed by well type and well status.CalGEM is the Geologic Energy Management Division of the California Department of Conservation, formerly the Division of Oil, Gas, and Geothermal Resources (as of January 1, 2020).WellSTAR homepageUpdate Frequency: As Needed

This is GIS data of well-header information for oil and gas wells in Kansas. The data is based on well information submitted to the Kansas Corporation Commission on wells planned, drilled, worked over, or plugged. Well information is also collected from wireline logs, core or cuttings submitted for storage, or historical compilations. Some data from other states is included for research purposes. The Kansas Geological Survey compiles and publishes this data. For field/column definitions, download this spreadsheet.The Kansas Geological Survey works with the Kansas Corporation Commission and the Kansas Department of Revenue to create an accurate listing of the oil and gas wells in Kansas. While the other agencies have regulatory duties facilitated by having an accurate accounting of oil and gas wells, the Survey maintains the listing for research purposes and for use by citizens and companies interested in the oil and gas resources of the state.

This data set contains surface locations for oil and gas wells located in the Pacific Coast federal waters. Note: Wells are being added or modified continuously; obtaining updates of this database are required to know the true distribution of well data.Because GIS projection and topology functions can change or generalize coordinates, these GIS files are considered to be approximate and are NOT an OFFICIAL record.Contains the well surface locations as of April 2015.

These data show the location of oil and gas wells within U.S. and territorial waters. The values of an oil and gas well record can change considerably over time, and with varied ownership, and with the jurisdiction that the well is located within. The fields in this data set are only a subset of the most common values available.

Surface Locations of Boreholes drilled for exploration or oil and gas production. Dataset is maintained by BOEM AK RE. All wells drilled before 1986 are mapped in NAD27 horizontal datum. These well locations were converted using the NCAT converter horizontal datum NAD27 to horizontal datum NAD83(1986). Karluk and Hansen Bay wells were excluded as they are State wells per direction by BOEM RSRE and BSEE AK.

Oil Well Top Hole Locations dataset current as of 2006. Oil and natural gas well point layer..

The table Oil Gas Locations/Wells is part of the dataset Oil Gas Locations--Conventional Unconventional, available at https://redivis.com/datasets/a0e1-8bcecqp4z. It contains 209051 rows across 43 variables.

description: Oil Well Top Hole Locations dataset current as of unknown. Oil wells.; abstract: Oil Well Top Hole Locations dataset current as of unknown. Oil wells.

The following data set contains all the Oil & Gas Wells in Pennsylvania that the Dept of Environmental Protection has locational information on. The wells are broken into two formation types of conventional and unconventional wells. A conventional well is a bore hole drilled or being drilled for the purpose of or to be used for the production of oil or natural gas from only conventional formation(s). A conventional formation is any formation that does not meet the statutory definition of an unconventional formation. An unconventional gas well is a bore hole drilled or being drilled for the purpose of or to be used for the production of natural gas from an unconventional formation. Unconventional formation is a geological shale formation existing below the base of the Elk Sandstone or its geologic equivalent stratigraphic interval where natural gas generally cannot be produced at economic flow rates or in economic volumes except by vertical or horizontal well bores stimulated by hydraulic fracture treatments or by using multilateral well bores or other techniques to expose more of the formation to the well bore.

This geographic information system combines detailed information and location coordinates for oil wells, gas wells, and pipelines from the Commission's files with base map data captured from U.S. Geological Survey 7.5 minute quadrangle maps. These interactive maps were developed using Environmental Systems Research Institute, Inc. (ESRI) ArcIMS software, and interface with the Commission's Production Data Query and Drilling Permit Query applications.

There are 487 onshore oil and gas fields in California encompassing 3,392 square miles of aggregated area. The California State Water Resources Control Board (State Water Board) initiated a Regional Monitoring Program (RMP) in July 2015, intended to determine where and to what degree groundwater quality may be at potential risk to contamination related to oil and gas development activities including well stimulation, well integrity issues, produced water ponds, and underground injection. The first step in monitoring groundwater in and near oil and gas fields is to prioritize the 487 fields using consistent statewide analysis of available data that indicate potential risk of groundwater to oil and gas development. There were limited existing data on potential groundwater risk factors available for oil and gas fields across the state. During 2014-2016, the U.S. Geological Survey (USGS) extracted and compiled data from various sources, including the California Division of Oil, Gas, and Geothermal Resources (DOGGR) and the Department of Water Resources (DWR). In 2014, total well depths for groundwater wells in California were extracted from digital copies of well completion reports provided to the USGS by DWR. This digital dataset contains 16,912 well depths for domestic, municipal, irrigation, industrial, and agricultural wells that were overlying oil and gas fields or within 5 kilometers of a field boundary. Wells were attributed with approximate location, well use, and depth using information provided by DWR, and were attributed with land surface elevations using the California National Elevation Dataset. Wells were also attributed with the nearest oil and gas field using DOGGR All Wells geospatial data included in this data release.

Download .zipMaps and data associated with oil-and-gas wells represent one of the largest datasets at the Ohio Department of Natural Resources. This GIS data layer contains all the locatable oil-and-gas wells in Ohio. The feature is derived from coordinates obtained from the Division of Oil and Gas Resources Management (DOGRM) oil and gas well database – Risk Based Data Management System (RBDMS). The RBDMS database has a long history and is a comprehensive collection of well data from historic pre-1980 paper well records (digitized by the Division of Geological Survey (DGS)) to post-1980 DOGRM database solutions.Since 1860, it is estimated that more than 267,000 oil-and-gas wells have been drilled in Ohio. The compressed file also includes a feature used to connect the surface location to the bottom location of a well that has been drilled directionally or horizontally. This feature is NOT the actual wellbore path, it is simply a graphical representation indicating the relationship between the two well points.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Oil & Gas ResourcesOil and Gas Resources Management2045 Morse Road Bldg F-2Columbus, OH, 43229-6693Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Geospatial dataset of abandoned oil and gas well locations, plugging statuses, and well/fluid types compiled from United States open-access state databases.