The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. County subdivisions are the primary divisions of counties and their equivalent entities for the reporting of Census Bureau data. They include legally- recognized minor civil divisions (MCDs) and statistical census county divisions (CCDs), and unorganized territories. For the 2010 Census, the MCDs are the primary governmental and/or administrative divisions of counties in 29 States and Puerto Rico; Tennessee changed from having CCDs for Census 2000 to having MCDs for the 2010 Census. In MCD States where no MCD exists or is not defined, the Census Bureau creates statistical unorganized territories to complete coverage. The entire area of the United States, Puerto Rico, and the Island Areas are covered by county subdivisions. The boundaries of most legal MCDs are as of January 1, 2019, as reported through the Census Bureau's Boundary and Annexation Survey (BAS). The boundaries of all CCDs, delineated in 20 states, are those as reported as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2010 Census.
To access the tax lot layer you will need to contact the county Assessor's office. ORMAP is a statewide digital cadastral base map that is publicly accessible, continually maintained, supports the Oregon property tax system, supports a multi-purpose land information system, strives to comply with appropriate state and national standards, and will continue to be improved over time.
The 2020 cartographic boundary shapefiles are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. County subdivisions are the primary divisions of counties and their equivalent entities for the reporting of Census Bureau data. They include legally-recognized minor civil divisions (MCDs) and statistical census county divisions (CCDs), and unorganized territories. In MCD states where no MCD exists or no MCD is defined, the Census Bureau creates statistical unorganized territories to complete coverage. The entire area of the United States, Puerto Rico, and the Island Areas are covered by county subdivisions. The generalized boundaries of legal MCDs are based on those as of January 1, 2020 as reported through the Census Bureau's Boundary and Annexation Survey (BAS). The generalized boundaries of all CCDs, delineated in 21 states, are those as reported as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2020 Census.
This data contains the location and legend of mileposts markers (signs) on state owned highways.
This data contains the location and legend of mileposts markers (signs) on state owned highways.This GIS base layer can be used for planning purposes and as a reference layer on standard Oregon Department of Transportation (ODOT) city and county map formats. Full details: https://geohub-oregon-geo.hub.arcgis.com/datasets/oregon-geo::mileposts/about
https://koordinates.com/license/attribution-3-0/https://koordinates.com/license/attribution-3-0/
Vector polygon map data of highway mileposts from Oregon, containing 7696 features.
Mile marker GIS data consists of points along a linear feature, such as roads or railways. They serve as reference points to measure distances along these features. Mile markers are often labeled with numbers indicating their distance from a starting point, such as a highway's origin or a railway station.
These markers are invaluable for navigation, route planning, emergency response, and data collection. For example, they help drivers and emergency services identify their location precisely on a road. In transportation planning, mile markers aid in analyzing traffic patterns, determining optimal routes, and estimating travel times. Additionally, they facilitate maintenance activities by providing clear reference points for inspecting and repairing infrastructure.
This data is available for viewing and sharing as a map in a Koordinates map viewer. This data is also available for export to DWG for CAD, PDF, KML, CSV, and GIS data formats, including Shapefile, MapInfo, and Geodatabase.
The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk Information And supporting data used to develop the risk data. The primary risk; classificatons used are the 1-percent-annual-chance flood event, the 0.2-percent- annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the UTM projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.
The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the UTM projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12000.
Use the app to find the downloadable area within Jackson County - 2 Foot Contour MapThe 2-foot Contour Map shows contours that were derived from several different LiDAR projects in the Rogue Valley over the last 10 years. The map can be used to both download and view the contour data. To use the map, search or zoom in to an address. When zoomed in to a specific scale, the map will change from the downloadable areas layer to 2-foot interval contour lines. The LiDAR Project Dates layer can be used to identify the date when the elevation was collected in an area. Please note that data is available only for the valley floor areas at this time.The 2ft contours were created from 1-meter pixel DEM and then cleaned to remove very small elevation changes and to create a smooth contour line. This information should not be used to create topographic surveys or other applications where the precise elevation of a location is required. For additional information on LiDAR in Oregon or to download the source data, please visit the DOGAMI Lidar Viewer.The downloadable data is a zipped ESRI Shapefile and is projected to Oregon State Plane South (Intl Feet) with NAD 1983 datum.
This theme shows line and polygon representation of the jurisdictional and cartographic county perimeters for Oregon. (BLM, 2015)
COB_ARC: This theme shows line representation of the jurisdictional and cartographic county perimeters for Oregon and Washington.
This theme is a graphic depiction of the legal jurisdictional county perimeters for the State of Oregon.
Extreme temperatures can vary greatly across communities due to differences in land use, shade availability, proximity to water, and elevation. Spatially detailed estimates of temperature are difficult to find - often they are stations that are not regularly spaced or are from satellite observations, which estimate only the surface temperature, which can be quite different from air temperature. The PRISM Climate Group at the Oregon State University have developed an 800-meter resolution climatology of temperature for the United States that provides enough detail for intra-city temperature comparisons. It is created by a downscaling model, Parameter-elevation Regressions on Independent Slopes Model (PRISM).The 1991-2020 climate normal for maximum temperature for the month of July was downloaded and analyzed in ArcGIS Pro. Zonal Statistics provide min, max, and mean summaries for county and census tracts (2020 version) geometries. All temperatures were converted from degrees Celsius to Fahrenheit. Additionally, in each layer the mean of the maximum temperature analysis for the next order of geometry is provided (e.g., county data in the tracts layer), which allows comparison of the observed temperature to a larger geographic average. Data Source: https://www.prism.oregonstate.edu/normals/Citation: PRISM Climate Group, Oregon State University, https://prism.oregonstate.edu, data created 10 June 2022, accessed 10 June 2022
Rogue River 2ft Contours Use the app to find the downloadable area within Jackson County - 2 Foot Contour MapThe 2-foot Contour Map shows contours that were derived from several different LiDAR projects in the Rogue Valley over the last 10 years. The map can be used to both download and view the contour data. To use the map, search or zoom in to an address. When zoomed in to a specific scale, the map will change from the downloadable areas layer to 2-foot interval contour lines. The LiDAR Project Dates layer can be used to identify the date when the elevation was collected in an area. Please note that data is available only for the valley floor areas at this time.The 2ft contours were created from 1-meter pixel DEM and then cleaned to remove very small elevation changes and to create a smooth contour line. This information should not be used to create topographic surveys or other applications where the precise elevation of a location is required. For additional information on LiDAR in Oregon or to download the source data, please visit the DOGAMI Lidar Viewer.The downloadable data is a zipped ESRI Shapefile and is projected to Oregon State Plane South (Intl Feet) with NAD 1983 datum.
Scoggins Dam in northwest Oregon lies within the Gales Creek fault zone (GCF), a northwest-striking system of active faults forming the boundary between the Coast Range and the Tualatin Valley about 25 km east of Portland, Oregon. Geologic mapping published in 2020 shows the dam to lie within a block-faulted releasing stepover between the right-lateral, NW-striking Scoggins Creek and Parsons Creek strands of the GCF. The Scoggins Creek strand is presently mapped beneath the existing dam about 200 m north of the south abutment. Preliminary results from paleoseismic trenching by the U.S. Bureau of Reclamation, Portland State University, and the U.S. Geological Survey indicate that these two major fault strands have had multiple surface rupturing earthquakes in the Holocene. To confirm the accuracy of the 2020 geologic map and the geometry of the GCF in the releasing stepover region, we completed additional geologic mapping of the dam, reservoir, and an alternative dam site downstream between July 2018 and May 2020. Using high-resolution lidar topographic data and satellite imagery on handheld digital tablets, we collected data at ~500 field sites in the heavily forested terrain. We used these detailed field observations to locate and digitally map the main Scoggins Creek and Parsons Creek fault strands, as well as the cross faults linking the two main strands, to produce an improved and more detailed geologic map and cross sections of Scoggins Valley and its existing and proposed dam sites.
This Zoning feature class is an element of the Oregon GIS Framework statewide, Zoning spatial data. This version is authorized for public use. Attributes include zoning districts that have been generalized to state classes. As of June 30, 2023, this feature class contains zoning data from 229 local jurisdictions. DLCD plans to continue adding to and updating this statewide zoning dataset as they receive zoning information from the local jurisdictions. Jurisdictions included in the latest version of the statewide zoning geodatabase:
Cities: Adams, Adrian, Albany, Amity, Antelope, Ashland, Astoria, Athena, Aurora, Banks, Barlow, Bay City, Beaverton, Bend, Boardman, Bonanza, Brookings, Brownsville, Burns, Butte Falls, Canby, Cannon Beach, Carlton, Cascade Locks, Cave Junction, Central Point, Chiloquin, Coburg, Columbia City, Coos Bay, Cornelius, Corvallis, Cottage Grove, Creswell, Culver, Dayton, Detroit, Donald, Drain, Dufur, Dundee, Dunes City, Durham, Eagle Point, Echo, Enterprise, Estacada, Eugene, Fairview, Falls City, Florence, Forest Grove, Fossil, Garibaldi, Gaston, Gates, Gearhart, Gervais, Gladstone, Gold Beach, Gold Hill, Grants Pass, Grass Valley, Gresham, Halsey, Happy Valley, Harrisburg, Helix, Hermiston, Hillsboro, Hines, Hood River, Hubbard, Idanha, Independence, Jacksonville, Jefferson, Johnson City, Jordan Valley, Junction City, Keizer, King City, Klamath Falls, La Grande, La Pine, Lafayette, Lake Oswego, Lebanon, Lincoln City, Lowell, Lyons, Madras, Malin, Manzanita, Maupin, Maywood Park, McMinnville, Medford, Merrill, Metolius, Mill City, Millersburg, Milton-Freewater, Milwaukie, Mitchell, Molalla, Monmouth, Moro, Mosier, Mount Angel, Myrtle Creek, Myrtle Point, Nehalem, Newberg, Newport, North Bend, North Plains, Nyssa, Oakridge, Ontario, Oregon City, Pendleton, Philomath, Phoenix, Pilot Rock, Port Orford, Portland, Prescott, Prineville, Rainier, Redmond, Reedsport, Rivergrove, Rockaway Beach, Rogue River, Roseburg, Rufus, Saint Helens, Salem, Sandy, Scappoose, Scio, Scotts Mills, Seaside, Shady Cove, Shaniko, Sheridan, Sherwood, Silverton, Sisters, Sodaville, Spray, Springfield, Stanfield, Stayton, Sublimity, Sutherlin, Sweet Home, Talent, Tangent, The Dalles, Tigard, Tillamook, Toledo, Troutdale, Tualatin, Turner, Ukiah, Umatilla, Vale, Veneta, Vernonia, Warrenton, Wasco, Waterloo, West Linn, Westfir, Weston, Wheeler, Willamina, Wilsonville, Winston, Wood Village, Woodburn, Yamhill.
Counties: Baker County, Benton County, Clackamas County, Clatsop County, Columbia County, Coos County, Crook County, Curry County, Deschutes County, Douglas County, Harney County, Hood River County, Jackson County, Jefferson County, Josephine County, Klamath County, Lane County, Lincoln County, Linn County, Malheur County, Marion County, Multnomah County, Polk County, Sherman County, Tillamook County, Umatilla County, Union County, Wasco County, Washington County, Wheeler County, Yamhill County.
R emaining jurisdictions either chose not to share data to incorporate into the public, statewide dataset or did not respond to DLCD’s request for data. These jurisdictions’ attributes are designated “not shared” in the orZDesc field and “NS” in the orZCode field.
The Floodplain Mapping study deliverables depict and quantify the flood risks for the study area. The primary risk classifications used are the 1-percent annual chance flood event, the 0.2-percent annual chance flood event, and areas of minimal flood risk. The Floodplain Mapping flood risk boundaries are derived from the engineering information Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA).
This data layer is an element of the Oregon GIS Framework. The Oregon Wetlands Database (2019) is a geodatabase consisting of three feature classes: 1) Local Wetland Inventory (LWI) Wetlands, 2) National Wetland Inventory (NWI) Wetlands, and 3) More Oregon Wetlands (MOW). Each feature class contains polygons representing wetland boundaries. The three feature classes originated from different sources with distinct purposes, methodologies and time frames for generating geospatial wetlands data, and there is overlap among them; however, all are relevant to the conservation and management of wetlands across the state of Oregon. See the metadata of the individual feature classes for more background information and details per dataset.
The Oregon Department of Forestry has three programs that are outlined by district boundaries. Use this hosted feature layer to display one or more in webmaps. Current June 7, 2019.Contact:Steve TimbrookGIS Data AdministratorAdministrative BranchInformation Technology Program - GIS UnitOregon Department of Forestrysteve.timbrook@odf.oregon.gov503.931.2755
The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the State Plane projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12000.
The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. County subdivisions are the primary divisions of counties and their equivalent entities for the reporting of Census Bureau data. They include legally- recognized minor civil divisions (MCDs) and statistical census county divisions (CCDs), and unorganized territories. For the 2010 Census, the MCDs are the primary governmental and/or administrative divisions of counties in 29 States and Puerto Rico; Tennessee changed from having CCDs for Census 2000 to having MCDs for the 2010 Census. In MCD States where no MCD exists or is not defined, the Census Bureau creates statistical unorganized territories to complete coverage. The entire area of the United States, Puerto Rico, and the Island Areas are covered by county subdivisions. The boundaries of most legal MCDs are as of January 1, 2019, as reported through the Census Bureau's Boundary and Annexation Survey (BAS). The boundaries of all CCDs, delineated in 20 states, are those as reported as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2010 Census.