The metropolitan influence zone classification, developed by researchers at Statistics Canada, classifies communities (census subdivisions) that lie outside census metropolitan areas (CMAs) and census agglomerations (CAs) according to the degree of influence that CMA/CAs have on them. The classification was used in this mapping project on quality of life to compare similar communities (or census subdivisions), in order to recognize inherent differences in the social and economic characteristics of different communities and differences in their geographic locations, which may have important influences on quality of life.

This table presents population and dwelling counts according to the Statistical Area Classification (SAC). These SAC components include: all census metropolitan areas (CMAs); all census agglomerations (CAs) with a breakdown for tracted and non-tracted census agglomerations; outside census metropolitan areas and census agglomerations which include: each of the four categories (strongly influenced, moderately influenced, weakly influenced and not influenced) of the CMA and CA influenced zones (MIZ) within the ten provinces; all the territories (all of Nunavut, the Northwest Territories and the Yukon, minus the data for CAs located in these territories).

Footnotes: 1 Population estimates based on the Standard Geographical Classification (SGC) 2016 as delineated in the 2016 Census. 2 A census metropolitan area (CMA) or a census agglomeration (CA) is formed by one or more adjacent municipalities centred on a population centre (known as the core). A CMA must have a total population of at least 100,000 of which 50,000 or more must live in the core based on adjusted data from the previous Census of Population Program. A CA must have a core population of at least 10,000 also based on data from the previous Census of Population Program. To be included in the CMA or CA, other adjacent municipalities must have a high degree of integration with the core, as measured by commuting flows derived from data on place of work from the previous Census Program. If the population of the core of a CA falls below 10,000, the CA is retired from the next census. However, once an area becomes a CMA, it is retained as a CMA even if its total population declines below 100,000 or the population of its core falls below 50,000. All areas inside the CMA or CA that are not population centres are rural areas. When a CA has a core of at least 50,000, based on data from the previous Census of Population, it is subdivided into census tracts. Census tracts are maintained for the CA even if the population of the core subsequently falls below 50,000. All CMAs are subdivided into census tracts (2016 Census Dictionary, catalogue number 98-301-X2016001). 3 An area outside census metropolitan areas and census agglomerations is made up of all areas (within a province or territory) unallocated to a census metropolitan area (CMA) or census agglomeration (CA). 4 The population growth, which is used to calculate population estimates of census metropolitan areas and census agglomerations (table 17100135), is comprised of the components of population growth (table 17100136). 5 This table replaces table 17100079. 6 The components of population growth for census metropolitan areas (CMAs) and census agglomerations (CAs) sometimes had to be calculated using information at the census division level, using the geographic conversion method. This method involves using the population component calculated at the level of the CD(s) in which the CMA or CA is located and applying a ratio corresponding to the proportion of the CMA or CA population included in the corresponding CD(s). For periods prior to 2005/2006, all demographic components for all CMAs and CAs were calculated using geographic conversions. For the periods from 2005/2006 to 2010/2011 inclusively, emigration and internal migration components for areas that were not CMAs according to the 2011 SGC were calculated using geographic conversions. For the periods 2011/2012 to 2015/2016 inclusively, the emigration and internal migration components of regions that were not CMAs or CAs according to the 2011 SGC were calculated using geographic conversions. For the relevant demographic components, trends should be interpreted with caution where the method of calculation has changed over time. This caveat applies particularly to the intraprovincial migration component, for which the assumptions of the geographic conversion method are more at risk of not being met. 7 Period from July 1 to June 30. 8 Age on July 1. 9 The estimates for net non-permanent residents are preliminary for 2020/2021, updated for 2019/2020 final up to 2018/2019. 10 Non-permanent residents (NPRs) are persons who are lawfully in Canada on a temporary basis under the authority of a temporary resident permit, along with members of their family living with them. NPRs include foreign workers, foreign students, the humanitarian population and other temporary residents. The humanitarian population includes refugee claimants and temporary residents who are allowed to remain in Canada on humanitarian grounds and are not categorized as either foreign workers or foreign students.

Monthly Canadian manufacturer's sales for 15 census metropolitan areas (CMA) for durable and non-durable goods by North American Industry Classification System (NAICS). Data in thousands of dollars. Unadjusted and seasonally adjusted data available from January 2013 to the current reference month. Not all combinations are available.

Footnotes: 1 Population estimates based on the Standard Geographical Classification (SGC) 2016 as delineated in the 2016 Census. 2 A census metropolitan area (CMA) or a census agglomeration (CA) is formed by one or more adjacent municipalities centred on a population centre (known as the core). A CMA must have a total population of at least 100,000 of which 50,000 or more must live in the core based on adjusted data from the previous Census of Population Program. A CA must have a core population of at least 10,000 also based on data from the previous Census of Population Program. To be included in the CMA or CA, other adjacent municipalities must have a high degree of integration with the core, as measured by commuting flows derived from data on place of work from the previous Census Program. If the population of the core of a CA falls below 10,000, the CA is retired from the next census. However, once an area becomes a CMA, it is retained as a CMA even if its total population declines below 100,000 or the population of its core falls below 50,000. All areas inside the CMA or CA that are not population centres are rural areas. When a CA has a core of at least 50,000, based on data from the previous Census of Population, it is subdivided into census tracts. Census tracts are maintained for the CA even if the population of the core subsequently falls below 50,000. All CMAs are subdivided into census tracts (2016 Census Dictionary, catalogue number 98-301-X2016001). 3 An area outside census metropolitan areas and census agglomerations is made up of all areas (within a province or territory) unallocated to a census metropolitan area (CMA) or census agglomeration (CA). 4 The population growth, which is used to calculate population estimates of census metropolitan areas and census agglomerations (table 17100135), is comprised of the components of population growth (table 17100136). 5 This table replaces table 17100079. 6 The components of population growth for census metropolitan areas (CMAs) and census agglomerations (CAs) sometimes had to be calculated using information at the census division level, using the geographic conversion method. This method involves using the population component calculated at the level of the CD(s) in which the CMA or CA is located and applying a ratio corresponding to the proportion of the CMA or CA population included in the corresponding CD(s). For periods prior to 2005/2006, all demographic components for all CMAs and CAs were calculated using geographic conversions. For the periods from 2005/2006 to 2010/2011 inclusively, emigration and internal migration components for areas that were not CMAs according to the 2011 SGC were calculated using geographic conversions. For the periods 2011/2012 to 2015/2016 inclusively, the emigration and internal migration components of regions that were not CMAs or CAs according to the 2011 SGC were calculated using geographic conversions. For the relevant demographic components, trends should be interpreted with caution where the method of calculation has changed over time. This caveat applies particularly to the intraprovincial migration component, for which the assumptions of the geographic conversion method are more at risk of not being met. 7 Period from July 1 to June 30. 8 Age on July 1. 9 The estimates for deaths are preliminary for 2020/2021, updated for 2019/2020 and final up to 2018/2019. Preliminary and updated estimates of deaths were produced by Demography Division, Statistics Canada (see definitions, data sources and methods record number 3601 and 3608) with the exception of Quebec's data which are taken from the estimates of "l'Institut de la statistique du Québec" (ISQ) and then adjusted to Statistics Canada's provincial estimates. Final data were produced by Health Statistics Division Statistics Canada (see definitions data sources and methods record number 3233). However before 2011 the final estimates may differ from the data released by the Health Statistics Division due to the imputation of certain unknown values. In addition for estimates of deaths the age represents age at the beginning of the period (July 1st) and not the age at the time of occurrence as with the Health Statistics Division data."

Footnotes: 1 Population estimates based on the Standard Geographical Classification (SGC) 2016 as delineated in the 2016 Census. 2 A census metropolitan area (CMA) or a census agglomeration (CA) is formed by one or more adjacent municipalities centred on a population centre (known as the core). A CMA must have a total population of at least 100,000 of which 50,000 or more must live in the core based on adjusted data from the previous Census of Population Program. A CA must have a core population of at least 10,000 also based on data from the previous Census of Population Program. To be included in the CMA or CA, other adjacent municipalities must have a high degree of integration with the core, as measured by commuting flows derived from data on place of work from the previous Census Program. If the population of the core of a CA falls below 10,000, the CA is retired from the next census. However, once an area becomes a CMA, it is retained as a CMA even if its total population declines below 100,000 or the population of its core falls below 50,000. All areas inside the CMA or CA that are not population centres are rural areas. When a CA has a core of at least 50,000, based on data from the previous Census of Population, it is subdivided into census tracts. Census tracts are maintained for the CA even if the population of the core subsequently falls below 50,000. All CMAs are subdivided into census tracts (2016 Census Dictionary, catalogue number 98-301-X2016001). 3 An area outside census metropolitan areas and census agglomerations is made up of all areas (within a province or territory) unallocated to a census metropolitan area (CMA) or census agglomeration (CA). 4 Postcensal estimates are based on the latest census counts adjusted for census net undercoverage (including adjustment for incompletely enumerated Indian reserves) and for the estimated population growth that occurred since that census. Intercensal estimates are based on postcensal estimates and census counts adjusted of the censuses preceding and following the considered year. 5 Population estimates as of July 1 are final intercensal up to 2015, final postcensal for 2016 to 2019, updated postcensal for 2020 and preliminary postcensal for 2021. 6 The population growth, which is used to calculate population estimates of census metropolitan areas and census agglomerations (table 17100135), is comprised of the components of population growth (table 17100136). 7 This table replaces table 17100078. 8 Age on July 1.

Annual population estimates as of July 1st, by census metropolitan area and census agglomeration, single year of age, five-year age group and sex, based on the Standard Geographical Classification (SGC) 2016.

Footnotes: 1 Population estimates based on the Standard Geographical Classification (SGC) 2016 as delineated in the 2016 Census.2 A census metropolitan area (CMA) or a census agglomeration (CA) is formed by one or more adjacent municipalities centred on a population centre (known as the core). A CMA must have a total population of at least 100,000 of which 50,000 or more must live in the core based on adjusted data from the previous Census of Population Program. A CA must have a core population of at least 10,000 also based on data from the previous Census of Population Program. To be included in the CMA or CA, other adjacent municipalities must have a high degree of integration with the core, as measured by commuting flows derived from data on place of work from the previous Census Program. If the population of the core of a CA falls below 10,000, the CA is retired from the next census. However, once an area becomes a CMA, it is retained as a CMA even if its total population declines below 100,000 or the population of its core falls below 50,000. All areas inside the CMA or CA that are not population centres are rural areas. When a CA has a core of at least 50,000, based on data from the previous Census of Population, it is subdivided into census tracts. Census tracts are maintained for the CA even if the population of the core subsequently falls below 50,000. All CMAs are subdivided into census tracts (2016 Census Dictionary, catalogue number 98-301-X2016001).3 An area outside census metropolitan areas and census agglomerations is made up of all areas (within a province or territory) unallocated to a census metropolitan area (CMA) or census agglomeration (CA).4 The population growth, which is used to calculate population estimates of census metropolitan areas and census agglomerations (table 17100135), is comprised of the components of population growth (table 17100136).5 This table replaces table 17100079.6 The components of population growth for census metropolitan areas (CMAs) and census agglomerations (CAs) sometimes had to be calculated using information at the census division level, using the geographic conversion method. This method involves using the population component calculated at the level of the CD(s) in which the CMA or CA is located and applying a ratio corresponding to the proportion of the CMA or CA population included in the corresponding CD(s). For periods prior to 2005/2006, all demographic components for all CMAs and CAs were calculated using geographic conversions. For the periods from 2005/2006 to 2010/2011 inclusively, emigration and internal migration components for areas that were not CMAs according to the 2011 SGC were calculated using geographic conversions. For the periods 2011/2012 to 2015/2016 inclusively, the emigration and internal migration components of regions that were not CMAs or CAs according to the 2011 SGC were calculated using geographic conversions. For the relevant demographic components, trends should be interpreted with caution where the method of calculation has changed over time. This caveat applies particularly to the intraprovincial migration component, for which the assumptions of the geographic conversion method are more at risk of not being met.7 Period from July 1 to June 30.8 Age on July 1.9 The estimates for immigrants are preliminary for 2020/2021 and final up to 2019/2020.

Footnotes: 1 Population estimates based on the Standard Geographical Classification (SGC) 2016 as delineated in the 2016 Census. 2 A census metropolitan area (CMA) or a census agglomeration (CA) is formed by one or more adjacent municipalities centred on a population centre (known as the core). A CMA must have a total population of at least 100,000 of which 50,000 or more must live in the core based on adjusted data from the previous Census of Population Program. A CA must have a core population of at least 10,000 also based on data from the previous Census of Population Program. To be included in the CMA or CA, other adjacent municipalities must have a high degree of integration with the core, as measured by commuting flows derived from data on place of work from the previous Census Program. If the population of the core of a CA falls below 10,000, the CA is retired from the next census. However, once an area becomes a CMA, it is retained as a CMA even if its total population declines below 100,000 or the population of its core falls below 50,000. All areas inside the CMA or CA that are not population centres are rural areas. When a CA has a core of at least 50,000, based on data from the previous Census of Population, it is subdivided into census tracts. Census tracts are maintained for the CA even if the population of the core subsequently falls below 50,000. All CMAs are subdivided into census tracts (2016 Census Dictionary, catalogue number 98-301-X2016001). 3 An area outside census metropolitan areas and census agglomerations is made up of all areas (within a province or territory) unallocated to a census metropolitan area (CMA) or census agglomeration (CA). 4 The population growth, which is used to calculate population estimates of census metropolitan areas and census agglomerations (table 17100135), is comprised of the components of population growth (table 17100136). 5 This table replaces table 17100079. 6 The components of population growth for census metropolitan areas (CMAs) and census agglomerations (CAs) sometimes had to be calculated using information at the census division level, using the geographic conversion method. This method involves using the population component calculated at the level of the CD(s) in which the CMA or CA is located and applying a ratio corresponding to the proportion of the CMA or CA population included in the corresponding CD(s). For periods prior to 2005/2006, all demographic components for all CMAs and CAs were calculated using geographic conversions. For the periods from 2005/2006 to 2010/2011 inclusively, emigration and internal migration components for areas that were not CMAs according to the 2011 SGC were calculated using geographic conversions. For the periods 2011/2012 to 2015/2016 inclusively, the emigration and internal migration components of regions that were not CMAs or CAs according to the 2011 SGC were calculated using geographic conversions. For the relevant demographic components, trends should be interpreted with caution where the method of calculation has changed over time. This caveat applies particularly to the intraprovincial migration component, for which the assumptions of the geographic conversion method are more at risk of not being met. 7 Period from July 1 to June 30. 8 Age on July 1. 9 The estimates for immigrants are preliminary for 2020/2021 and final up to 2019/2020.

This table contains 2880 series, with data for years 2015 - 2015 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (48 items: Canada; Newfoundland and Labrador; Prince Edward Island; Nova Scotia; ...); Type of supply (3 items: Municipal and non-municipal water supply; Municipal water supply; Non-municipal water supply); Outdoor water use (20 items: Had a barrel or cistern; Had a lawn; Watered lawn during previous summer; Used a lawn sprinkler or sprinkler system; ...).

Estimates of infant mortality rates are available at the national level (by sex) and based on residence within or outside of a census metropolitan area (CMA). Estimates are available for the whole country for the periods 2004-2006 and 2014-2016 and for Canada excluding Ontario for the periods 1994-1996, 2004-2006 and 2014-2016.

Estimates of life expectancy at birth are provided at the national level (by sex), at the province or regional level, and based on residence within or outside of a census metropolitan area (CMA) for a series of three five-year reference periods beginning in 2006-2011.

Footnotes: 1 Population estimates based on the Standard Geographical Classification (SGC) 2016 as delineated in the 2016 Census. 2 A census metropolitan area (CMA) or a census agglomeration (CA) is formed by one or more adjacent municipalities centred on a population centre (known as the core). A CMA must have a total population of at least 100,000 of which 50,000 or more must live in the core based on adjusted data from the previous Census of Population Program. A CA must have a core population of at least 10,000 also based on data from the previous Census of Population Program. To be included in the CMA or CA, other adjacent municipalities must have a high degree of integration with the core, as measured by commuting flows derived from data on place of work from the previous Census Program. If the population of the core of a CA falls below 10,000, the CA is retired from the next census. However, once an area becomes a CMA, it is retained as a CMA even if its total population declines below 100,000 or the population of its core falls below 50,000. All areas inside the CMA or CA that are not population centres are rural areas. When a CA has a core of at least 50,000, based on data from the previous Census of Population, it is subdivided into census tracts. Census tracts are maintained for the CA even if the population of the core subsequently falls below 50,000. All CMAs are subdivided into census tracts (2016 Census Dictionary, catalogue number 98-301-X2016001). 3 An area outside census metropolitan areas and census agglomerations is made up of all areas (within a province or territory) unallocated to a census metropolitan area (CMA) or census agglomeration (CA). 4 The population growth, which is used to calculate population estimates of census metropolitan areas and census agglomerations (table 17100135), is comprised of the components of population growth (table 17100136). 5 This table replaces table 17100079. 6 The components of population growth for census metropolitan areas (CMAs) and census agglomerations (CAs) sometimes had to be calculated using information at the census division level, using the geographic conversion method. This method involves using the population component calculated at the level of the CD(s) in which the CMA or CA is located and applying a ratio corresponding to the proportion of the CMA or CA population included in the corresponding CD(s). For periods prior to 2005/2006, all demographic components for all CMAs and CAs were calculated using geographic conversions. For the periods from 2005/2006 to 2010/2011 inclusively, emigration and internal migration components for areas that were not CMAs according to the 2011 SGC were calculated using geographic conversions. For the periods 2011/2012 to 2015/2016 inclusively, the emigration and internal migration components of regions that were not CMAs or CAs according to the 2011 SGC were calculated using geographic conversions. For the relevant demographic components, trends should be interpreted with caution where the method of calculation has changed over time. This caveat applies particularly to the intraprovincial migration component, for which the assumptions of the geographic conversion method are more at risk of not being met. 7 Period from July 1 to June 30. 8 Age on July 1. 9 The estimates for net temporary emigration are preliminary for 2020/2021, updated for 2019/2020 final up to 2018/2019. 10 Please note that for the emigration, the returning emigration and the net temporary emigration, the estimates for the most recent periods are expected to be identical or very similar. In the absence of more up-to-date data sources, the assumption is made that levels remain similar.

This Alberta Official Statistic describes the proportions of Aboriginal Identity Populations (Movers) that reported a mobility status change (place of residence 5 years ago) for Alberta and its Census Metropolitan Areas. Mobility status refers to the relationship between a person’s usual place of residence on Census day (May 10, 2011) and his or her place of residence five years earlier (May 10, 2006). “Movers” are those who reported a change of address. There are two types of “Movers”: “Non-Migrants” and “Migrants”. “Migrants” are classified into “External Migrants” and “Internal Migrants”, which are further categorized into “Intraprovincial Migrants” and “Interprovincial Migrants”.

Components of population change by census metropolitan area and census agglomeration, single year of age, five-year age group and sex for the period from July 1 to June 30, annual, based on the Standard Geographical Classification (SGC) 2016. The components include births, deaths, immigrants, emigrants, returning emigrants, net temporary emigration, net interprovincial migration, net intraprovincial migration, net non-permanent residents and residual deviation.

Footnotes: 1 Population estimates based on the Standard Geographical Classification (SGC) 2016 as delineated in the 2016 Census. 2 A census metropolitan area (CMA) or a census agglomeration (CA) is formed by one or more adjacent municipalities centred on a population centre (known as the core). A CMA must have a total population of at least 100,000 of which 50,000 or more must live in the core based on adjusted data from the previous Census of Population Program. A CA must have a core population of at least 10,000 also based on data from the previous Census of Population Program. To be included in the CMA or CA, other adjacent municipalities must have a high degree of integration with the core, as measured by commuting flows derived from data on place of work from the previous Census Program. If the population of the core of a CA falls below 10,000, the CA is retired from the next census. However, once an area becomes a CMA, it is retained as a CMA even if its total population declines below 100,000 or the population of its core falls below 50,000. All areas inside the CMA or CA that are not population centres are rural areas. When a CA has a core of at least 50,000, based on data from the previous Census of Population, it is subdivided into census tracts. Census tracts are maintained for the CA even if the population of the core subsequently falls below 50,000. All CMAs are subdivided into census tracts (2016 Census Dictionary, catalogue number 98-301-X2016001). 3 An area outside census metropolitan areas and census agglomerations is made up of all areas (within a province or territory) unallocated to a census metropolitan area (CMA) or census agglomeration (CA). 4 The population growth, which is used to calculate population estimates of census metropolitan areas and census agglomerations (table 17100135), is comprised of the components of population growth (table 17100136). 5 This table replaces table 17100079. 6 The components of population growth for census metropolitan areas (CMAs) and census agglomerations (CAs) sometimes had to be calculated using information at the census division level, using the geographic conversion method. This method involves using the population component calculated at the level of the CD(s) in which the CMA or CA is located and applying a ratio corresponding to the proportion of the CMA or CA population included in the corresponding CD(s). For periods prior to 2005/2006, all demographic components for all CMAs and CAs were calculated using geographic conversions. For the periods from 2005/2006 to 2010/2011 inclusively, emigration and internal migration components for areas that were not CMAs according to the 2011 SGC were calculated using geographic conversions. For the periods 2011/2012 to 2015/2016 inclusively, the emigration and internal migration components of regions that were not CMAs or CAs according to the 2011 SGC were calculated using geographic conversions. For the relevant demographic components, trends should be interpreted with caution where the method of calculation has changed over time. This caveat applies particularly to the intraprovincial migration component, for which the assumptions of the geographic conversion method are more at risk of not being met. 7 Period from July 1 to June 30. 8 Age on July 1. 9 The estimates for net interprovincial migration are preliminary for 2020/2021 and final up to 2019/2020.

This table contains data for gross domestic product (GDP), in current dollars, for all census metropolitan area and non-census metropolitan areas.

Footnotes: 1 Population estimates based on the Standard Geographical Classification (SGC) 2016 as delineated in the 2016 Census. 2 A census metropolitan area (CMA) or a census agglomeration (CA) is formed by one or more adjacent municipalities centred on a population centre (known as the core). A CMA must have a total population of at least 100,000 of which 50,000 or more must live in the core based on adjusted data from the previous Census of Population Program. A CA must have a core population of at least 10,000 also based on data from the previous Census of Population Program. To be included in the CMA or CA, other adjacent municipalities must have a high degree of integration with the core, as measured by commuting flows derived from data on place of work from the previous Census Program. If the population of the core of a CA falls below 10,000, the CA is retired from the next census. However, once an area becomes a CMA, it is retained as a CMA even if its total population declines below 100,000 or the population of its core falls below 50,000. All areas inside the CMA or CA that are not population centres are rural areas. When a CA has a core of at least 50,000, based on data from the previous Census of Population, it is subdivided into census tracts. Census tracts are maintained for the CA even if the population of the core subsequently falls below 50,000. All CMAs are subdivided into census tracts. 3 An area outside census metropolitan areas and census agglomerations is made up of all areas (within a province or territory) unallocated to a census metropolitan area (CMA) or census agglomeration (CA). 4 The estimates for interprovincial and intraprovincial migrants are final. Intraprovincial migrant data for the province of Quebec are taken from the estimates of l'Institut de la statistique du Québec" (ISQ)." 5 This table replaces table 17100087. 6 When adding up migrant flows in this table, small differences may be observed when comparing them with the number of migrants from table 17000136. Those differences are expected and are the results of minor edits necessary to ensure the consistency of the cohort component formula. 7 Period from July 1 to June 30.

Compares distribution of highest certificate, diploma or degree between cities in the same province or territory. Allows sorting/ranking of cities by percentage.

Footnotes: 1 Sources: Statistics Canada, Canadian Vital Statistics, Birth, Death and Stillbirth Databases. The table 13-10-0110-01 is an update of table 13-10-0408-01. 2 Infant mortality corresponds to the death of a child under one year of age. Expressed as a rate per 1,000 live births. 3 Perinatal deaths include late fetal deaths (stillbirths with a gestational age of 28 weeks or more) and early neonatal deaths (deaths of infants aged less than one week). 4 Numbers and rates in this table may differ from those found in similar data published by the Vital Statistics program as the data here have been tabulated based on postal codes available for place of residence. 5 2017 data for Yukon are not available. 6 The number of births, stillbirths, and deaths in Ontario for 2016 and 2017 are considered preliminary. 7 Due to improvements in methodology and timeliness, the duration of data collection has been shortened compared to previous years. As a result, there may have been fewer births and stillbirths captured by the time of the release. The 2017 data are therefore considered preliminary. 8 A census metropolitan area (CMA) is an area consisting of one or more adjacent municipalities situated around a major urban core. To form a census metropolitan area, the urban core must have a population of at least 100,000. The CMAs are those defined for the 2016 Census. To form a census agglomeration, the urban core must have a population of at least 10,000. 9 The metropolitan influenced zone (MIZ) classification is an approach to better differentiate areas of Canada outside of census metropolitan areas and census agglomerations. Census subdivisions that lie outside these areas are classified into one of four zones of influence. They are assigned to categories based on the flow of residents travelling to work in an urban area with a population greater than 10,000. Municipalities where more that 30% of the residents commute to work in an urban core are assigned to the strong MIZ category. Municipalities where between 5% and 30% of the residents commute to work in an urban core are assigned to the moderate MIZ category. Municipalities where between 0% and 5% of the residents commute to work in an urban core are assigned to the weak MIZ category. Municipalities where fewer than 40 or none of the residents commute to work in an urban core are assigned to the zero MIZ category. 10 Geographical areas are modified every 5 years to reflect the most recent census definitions, therefore, data are not strictly comparable historically. 11 Counts and rates in this table are based on three consecutive years of data. 12 The 95% confidence interval (CI) illustrates the degree of variability associated with a rate. 13 Wide confidence intervals (CIs) indicate high variability, thus, these rates should be interpreted and compared with due caution. 14 The following standard symbols are used in this Statistics Canada table: (..) for figures not available for a specific reference period, (...) for figures not applicable and (x) for figures suppressed to meet the confidentiality requirements of the Statistics Act. 15 The figures shown in the tables have been subjected to a confidentiality procedure known as controlled rounding to prevent the possibility of associating statistical data with any identifiable individual. Under this method, all figures, including totals and margins, are rounded either up or down to a multiple of 5. Controlled rounding has the advantage over other types of rounding of producing additive tables as well as offering more protection.