County of San Bernardino parcels. Parcels are updated approximately every two weeks. For questions about this dataset, please email opendata@isd.sbcounty.gov.

To download:1. Click the Download button above.2. A side panel will appear showing download options. Under Shapefile, click the Download button.3. When the download completes, browse to the location of the downloaded .zip, copy it to the location where you manage your redistricting files, then right-click to extract the contents. You will then be able to use the file in GIS software.If, rather than downloading the data, you wish the reference online versions of these datasets directly to ensure you are always using the most up-to-date data, please contact the County of San Bernardino Innovation and Technology Departments at 909-884-4884 or by emailing OpenData@isd.sbcounty.gov for informations and instructions for doing so.Parcel polygons for the County of San Bernardino with assessment and zoning attributes. This parcel data is maintained by the County of San Bernardino Land Use Services Department, and the Surveyor and Assessor offices.

This dataset includes one file for each of the 51 counties that were collected, as well as a CA_Merged file with the parcels merged into a single file.Note – this data does not include attributes beyond the parcel ID number (PARNO) – that will be provided when available, most likely by the state of California.DownloadA 1.6 GB zipped file geodatabase is available for download - click here.DescriptionA geodatabase with parcel boundaries for 51 (out of 58) counties in the State of California. The original target was to collect data for the close of the 2013 fiscal year. As the collection progressed, it became clear that holding to that time standard was not practical. Out of expediency, the date requirement was relaxed, and the currently available dataset was collected for a majority of the counties. Most of these were distributed with minimal metadata.The table “ParcelInfo” includes the data that the data came into our possession, and our best estimate of the last time the parcel dataset was updated by the original source. Data sets listed as “Downloaded from” were downloaded from a publicly accessible web or FTP site from the county. Other data sets were provided directly to us by the county, though many of them may also be available for direct download. Â These data have been reprojected to California Albers NAD84, but have not been checked for topology, or aligned to county boundaries in any way. Tulare County’s dataset arrived with an undefined projection and was identified as being California State Plane NAD83 (US Feet) and was assigned by ICE as that projection prior to reprojection. Kings County’s dataset was delivered as individual shapefiles for each of the 50 assessor’s books maintained at the county. These were merged to a single feature class prior to importing to the database.The attribute tables were standardized and truncated to include only a PARNO (APN). The format of these fields has been left identical to the original dataset. The Data Interoperablity Extension ETL tool used in this process is included in the zip file. Where provided by the original data sources, metadata for the original data has been maintained. Please note that the attribute table structure changes were made at ICE, UC Davis, not at the original data sources.Parcel Source InformationCountyDateCollecDateCurrenNotesAlameda4/8/20142/13/2014Download from Alamenda CountyAlpine4/22/20141/26/2012Alpine County PlanningAmador5/21/20145/14/2014Amador County Transportation CommissionButte2/24/20141/6/2014Butte County Association of GovernmentsCalaveras5/13/2014Download from Calaveras County, exact date unknown, labelled 2013Contra Costa4/4/20144/4/2014Contra Costa Assessor’s OfficeDel Norte5/13/20145/8/2014Download from Del Norte CountyEl Dorado4/4/20144/3/2014El Dorado County AssessorFresno4/4/20144/4/2014Fresno County AssessorGlenn4/4/201410/13/2013Glenn County Public WorksHumboldt6/3/20144/25/2014Humbodt County AssessorImperial8/4/20147/18/2014Imperial County AssessorKern3/26/20143/16/2014Kern County AssessorKings4/21/20144/14/2014Kings CountyLake7/15/20147/19/2013Lake CountyLassen7/24/20147/24/2014Lassen CountyLos Angeles10/22/201410/9/2014Los Angeles CountyMadera7/28/2014Madera County, Date Current unclear likely 7/2014Marin5/13/20145/1/2014Marin County AssessorMendocino4/21/20143/27/2014Mendocino CountyMerced7/15/20141/16/2014Merced CountyMono4/7/20144/7/2014Mono CountyMonterey5/13/201410/31/2013Download from Monterey CountyNapa4/22/20144/22/2014Napa CountyNevada10/29/201410/26/2014Download from Nevada CountyOrange3/18/20143/18/2014Download from Orange CountyPlacer7/2/20147/2/2014Placer CountyRiverside3/17/20141/6/2014Download from Riverside CountySacramento4/2/20143/12/2014Sacramento CountySan Benito5/12/20144/30/2014San Benito CountySan Bernardino2/12/20142/12/2014Download from San Bernardino CountySan Diego4/18/20144/18/2014San Diego CountySan Francisco5/23/20145/23/2014Download from San Francisco CountySan Joaquin10/13/20147/1/2013San Joaquin County Fiscal year close dataSan Mateo2/12/20142/12/2014San Mateo CountySanta Barbara4/22/20149/17/2013Santa Barbara CountySanta Clara9/5/20143/24/2014Santa Clara County, Required a PRA requestSanta Cruz2/13/201411/13/2014Download from Santa Cruz CountyShasta4/23/20141/6/2014Download from Shasta CountySierra7/15/20141/20/2014Sierra CountySolano4/24/2014Download from Solano Couty, Boundaries appear to be from 2013Sonoma5/19/20144/3/2014Download from Sonoma CountyStanislaus4/23/20141/22/2014Download from Stanislaus CountySutter11/5/201410/14/2014Download from Sutter CountyTehama1/16/201512/9/2014Tehama CountyTrinity12/8/20141/20/2010Download from Trinity County, Note age of data 2010Tulare7/1/20146/24/2014Tulare CountyTuolumne5/13/201410/9/2013Download from Tuolumne CountyVentura11/4/20146/18/2014Download from Ventura CountyYolo11/4/20149/10/2014Download from Yolo CountyYuba11/12/201412/17/2013Download from Yuba County

The 17,158 acre Johnson Valley project area is located in San Bernardino County, 32 miles east of Victorville, CA bisected by highway 247. The fine-scale vegetation map was created as part of a collaborative project between the United States Geological Survey (USGS) and the Vegetation Classification and Mapping Program of the California Department of Fish and Wildlife (CDFW) to show the correlation between vegetation and geomorphology. The vegetation mapping types are based on the vegetation classification that was developed for the larger Desert Renewable Energy Conservation Plan (DRECP) mapping project (CDFW 2013). The vegetation classification was developed using a compilation of data collected for several projects including Anza-Borrego Desert State Park and Environs (Keeler-Wolf et al. 1998), the Mojave Desert Ecosystem Program''s Vegetation Database (Thomas et al. 2004), Vegetation of Joshua Tree National Park (La Doux et al. 2013), and Vegetation Classification and Mapping at Lake Mead National Recreation Area, Mojave National Preserve and Death Valley National Park (in progress, draft as of 2014).

This shapefile contains tax rate area (TRA) boundaries in San Bernardino County for the specified assessment roll year. Boundary alignment is based on the 2010 county parcel map. A tax rate area (TRA) is a geographic area within the jurisdiction of a unique combination of cities, schools, and revenue districts that utilize the regular city or county assessment roll, per Government Code 54900. Each TRA is assigned a six-digit numeric identifier, referred to as a TRA number. TRA = tax rate area number

This ownership dataset utilizes a methodology that results in a federal ownership extent that matches the Federal Responsibility Areas (FRA) footprint from CAL FIRE's State Responsibility Areas for Fire Protection (SRA) data. FRA lands are snapped to county parcel data, thus federal ownership areas will also be snapped. Since SRA Fees were first implemented in 2011, CAL FIRE has devoted significant resources to improve the quality of SRA data. This includes comparing SRA data to data from other federal, state, and local agencies, an annual comparison to county assessor roll files, and a formal SRA review process that includes input from CAL FIRE Units. As a result, FRA lands provide a solid basis as the footprint for federal lands in California (except in the southeastern desert area). The methodology for federal lands involves:

A 3D multi-patch feature service of building footprints in San Bernardino County's Primary Urban Area as of 2021. Data was created as an ancillary product of aerial imagery.

This parcel lines feature class represents the current city parcel lines within the City of Los Angeles. It shares topology with the Landbase Parcel_polygons feature class. The Mapping and Land Records Division of the Bureau of Engineering, Department of Public Works provides the most current geographic information of the public right of way, ownership and land record information. The legal boundaries are determined on the ground by license surveyors in the State of California, and by recorded documents from the Los Angeles County Recorder's office and the City Clerk's office of the City of Los Angeles. Parcel and ownership information are available on NavigateLA, a website hosted by the Bureau of Engineering, Department of Public Works.Associated information about the landbase parcel lines is entered into attributes. Principal attributes include:CV_LAYER: is the principal field that describes the various types of lines like street and freeway right-of-ways, tract, lots, government property and easements lines, private street lines, utility right-of-ways, and ownership lines. For a complete list of attribute values, please refer to Landbase_parcel_lines_data_dictionary.Landbase parcels lines layer was created in geographical information systems (GIS) software to display the location of parcel lots. The parcels lines layer is a feature class in the LACityLandbaseData.gdb Geodatabase dataset. The layer consists of spatial data as a line feature class and attribute data for the features. The lines are derived from the polygon feature class in the landbase parcels layer, and information about the lines is entered into attributes. The CV_LAYER field values describe the various types of lines. The right-of-way, row, line features consist of CV_LAYER = 6, CV_LAYER = 106, and portions of CV_LAYER = 1 where that line is both the city boundary and the parcel line. In some cases, a parcel line will share two different type descriptions. Refer to CV_LAYER field metadata for further explantion. Parcel information should only be added to the Landbase Parcels layer if documentation exists, such as a Deed or a Plan approved by the City Council. When seeking the definitive description of real property, consult the recorded Deed or Plan.List of Fields:ASSETIDCV_LAYER: This value is a number representing a different type of user-assigned layer. Each of the line segments in the landbase parcels lines are assigned one of the CV_LAYER numbers, representing a different type of line work, described below. In some cases, a parcel line will share two different type descriptions. Such as, a parcel line may have CV_LAYER = 1 City Boundary line, and it is a CV_LAYER = 8 Tract line. The Tract line description is used first, and the City Boundary line description is used second. When selecting City Boundary line using CV_LAYER = 1, then (special way to select data...). The right-of-way, row, line features consist of CV_LAYER = 6, CV_LAYER = 106, and portions of CV_LAYER = 1 where that line is both the city boundary and the parcel line. Values: • 50 - Lot cut linework. • 38 - Freeway ease as easement lines. • 108 - Tract lines that are private street lines. • 8 - Tract lines, Rancho lines, Freeway (Fwy), and Right of way lines. • 30 - Former city boundary lines; other city or county boundary line. • 34 - Overlap lines. • 6 - Right of way (R/W) sidelines. • 19 - LA City easement lines. • 21 - All governmental lines (Fee). • 37 - APN (BPP) lines shown on tax assessors map (PCL maps); but no new PIN is created for the parcels polygon feature. • 48 - Subdivision title anno shown for ownership purpose (lot cut). • 10 - Lot lines. • 68 - SBBM (San Bernardino Base Meridian) section lines. • 1 - Boundary lines (existing). • 110 - Lot lines that are private street lines. • 18 - All governmental easement lines (except LA City and State freeway ease right of way lines). • 106 - Fwy traveled roadway lines; Dash right of way lines; Railroad and transmission lines. • 0 - Cadastral format.SHAPE: Feature geometry.OBJECTID: Internal feature number.ID: A unique numeric identifier of the polygon. The ID value is the last part of the PIN field value.MAPSHEET: The alpha-numeric mapsheet number, which refers to a valid B-map or A-map number on the Cadastral tract index map. Values: • B, A, -5A - Any of these alpha-numeric combinations are used, whereas the underlined spaces are the numbers.

This shapefile contains tax rate area (TRA) boundaries in San Bernardino County for the specified assessment roll year. Boundary alignment is based on the 2010 county parcel map. A tax rate area (TRA) is a geographic area within the jurisdiction of a unique combination of cities, schools, and revenue districts that utilize the regular city or county assessment roll, per Government Code 54900. Each TRA is assigned a six-digit numeric identifier, referred to as a TRA number. TRA = tax rate area number

This service shows the parcels critical for groundwater recharge within the Valley region of San Bernardino County. This data was provided by the water agencies responsable for the management of groundwater recharge