This data identifies current as well as proposed zoning and land use designations that are adopted by ordinances for unincorporated Pierce County. Zoning for cities is not included in this dataset. Zones are adopted by ordinances with specific technicalities for each community. Land Use designations offer a broad spectrum of allowable uses within a community. It is used to create a Comprehensive Plan Map or used for a Generalized Proposed Land Use Map or GPLUM. This dataset is also used to create the Land Use Designations theme, which covers proposed zoning use. The meaning of proposed is that the property might not be currently used for the purpose stated. It should be noted that Council adopted amendments to land use designations/zoning that will be effective at the beginning of 2006. Also, the Council is in the process of adopting the Mid-County Community Plan which amends land use designations/zoning as well. The Cities polygons found in the zoning data does not necessarily match the current cities boundaries. This is because the zoning data is updated once a year per the "Pierce County Comprehensive Plan" and does not allow for changes to be made during the year. The Comprehensive Plan is generally updated in November and generally becomes effective the following March. Use the "Cities in Pierce County" data set to determine current city boundaries. City boundaries can change more often than the current adopted Pierce County Zoning data. The zoning data contains the "Cities in Pierce County" boundaries at the time that the Pierce County Zoning was adopted. When determining the current zoning of a parcel near a city, the current "Cities in Pierce County" data set needs to be reviewed. Zoning codes for parcels within incorporated cities are determined by the city that the parcel is within.Please read metadata for additional information https://matterhorn.piercecountywa.gov/GISmetadata/pdbplan_zoning.html). Any data download constitutes acceptance of the Terms of Use (https://matterhorn.piercecountywa.gov/disclaimer/PierceCountyGISDataTermsofUse.pdf).
This data identifies current as well as proposed zoning and land use designations that are adopted by ordinances for unincorporated Pierce County. Zoning for cities is not included in this dataset. Zones are adopted by ordinances with specific technicalities for each community. Land Use designations offer a broad spectrum of allowable uses within a community. It is used to create a Comprehensive Plan Map or used for a Generalized Proposed Land Use Map or GPLUM. This dataset is also used to create the Land Use Designations theme, which covers proposed zoning use. The meaning of proposed is that the property might not be currently used for the purpose stated. It should be noted that Council adopted amendments to land use designations/zoning that will be effective at the beginning of 2006. Also, the Council is in the process of adopting the Mid-County Community Plan which amends land use designations/zoning as well. The Cities polygons found in the zoning data does not necessarily match the current cities boundaries. This is because the zoning data is updated once a year per the "Pierce County Comprehensive Plan" and does not allow for changes to be made during the year. The Comprehensive Plan is generally updated in November and generally becomes effective the following March. Use the "Cities in Pierce County" data set to determine current city boundaries. City boundaries can change more often than the current adopted Pierce County Zoning data. The zoning data contains the "Cities in Pierce County" boundaries at the time that the Pierce County Zoning was adopted. When determining the current zoning of a parcel near a city, the current "Cities in Pierce County" data set needs to be reviewed. Zoning codes for parcels within incorporated cities are determined by the city that the parcel is within. Please read metadata for additional information (https://matterhorn.co.pierce.wa.us/GISmetadata/pdbplan_zoning.html). Any use or data download constitutes acceptance of the Terms of Use (https://matterhorn.co.pierce.wa.us/Disclaimer/PierceCountyGISDataTermsofUse.pdf).
This feature class shows locations of the historic places within incorporated City of Puyallup. It is Tax Parcel polygon based feature class of historic places that are listed on either the National, Washington State, Pierce County Historical Register or the City of Puyallup's (registry) historical preservation program.Ordinance #2986, effective September 11, 2011 established the City of Puyallup Register of Historic Places. Buildings placed on the Puyallup Register are included in this shapefile and are denoted as such. These properties also have a 'zone designation' of HR and are mapped on the City's Official Zoning Map found in City Hall. They are also noted on the online zoning map book.
As part of a Channel Migration Zone Study, GeoEngineers, Inc. was contracted by Pierce County, Public Works Surface Water Management formerly “Water Programs” Division to create a series of shapefiles including the SPC_Migration_Potential_Areas.shp. Pierce_Migration_Potential_Areas.shp combines the include severe, moderate or low migration potential areas. GeoEngineers, Inc. completed migration potential studies of the White, Puyallup and Carbon Rivers (completed 2003 adopted 2005), South Prairie Creek (completed 2005 adopted 2017) and Upper Nisqually River (completed 2007 adopted 2017). These were accepted by SWM and Adopted by County Council.The MPA delineation involved identifying severe, moderate and low migration potential areas within the delineated CMZ. The MPA delineation approach is similar to that employed in our CMZ analysis; that future rates and character of migration will be similar to those of the past for similar water discharges, sediment influx, and debris entrainment conditions. This analysis was also based on the absence of levees, revetments and other confining structures. The width of each MPA was measured, based on delineation criteria developed specifically for this project, and then adjusted to accommodate geomorphic conditions not accounted for in the maximum migration rates. Criteria developed for mapping severe, moderate and low MPA are provided in the following paragraphs: Severe MPA includes the area lying inside the HCOT, and an area immediately outside the HCOT boundary equivalent to a distance the channel could travel in a specified period. The extent of the Severe Migration Potential Area outside the HCOT boundary is determined by two criteria. The first criterion is the distance the outside channel edge could travel in 10 years of steady lateral migration away from the HCOT boundary (Maximum lateral migration rates multiplied by a ten- year period). The second is defined by the distance the outside channel edge could travel in storm single event (i.e. maximum overnight rate) from the current channel position (2002). The landward most boundary of the two criteria defines the Severe Migration Potential Area.Moderate MPA includes areas adjacent to the outside edge of the severe migration potential area. The width of the moderate migration potential area is determined by the distance the outside channel edge could travel in five years (for South Prairie Creek 10 years) of steady lateral migration beyond the outside edge of the severe migration potential area. The CMZ boundary will serve as the outside edge of the moderate migration potential boundary at sites where the distance between the severe migration potential boundary and the CMZ boundary represents less the five years (for South Prairie Creek 10 years)of steady lateral migration. Moderate migration potential areas are not included at sites where the outside edge of the severe migration potential area is determined by the location of the CMZ boundary. The rate of migration used in the calculation is the maximum average rate of migration for each geomorphic reach (measured as described above). In some places the width of the Moderate Migration Potential Area may be modified based on geologic interpretation, professional judgment. Low MPA includes areas adjacent to the outside edge of the moderate migration potential area. The extent of the Low Migration Potential Area beyond the moderate migration potential boundary will be determined by CMZ boundary, as determined by our CMZ evaluation. Low migration potential areas will not be included at sites where the outside edge of either a severe or moderate migration potential area is determined by the location of the CMZ boundary. The most common adjustments typically involved widening the moderate MPA to include ancient abandoned channel deemed capable of arresting main stem flow in an avulsion event. Other common Moderate MPA adjustments involved increasing or decreasing the base width to accommodate the following conditions; The presence of native erosion resistant bank materials, such as the Osceola Mudflow or local downstream or oblique direction of meander bend migration.
Please read metadata for additional information (https://matterhorn.co.pierce.wa.us/GISmetadata/pdbswm_regulated_cmz_floodway_all.html). Any data download constitutes acceptance of the Terms of Use (https://matterhorn.co.pierce.wa.us/Disclaimer/PierceCountyGISDataTermsofUs (pdf).
Not seeing a result you expected?
Learn how you can add new datasets to our index.
This data identifies current as well as proposed zoning and land use designations that are adopted by ordinances for unincorporated Pierce County. Zoning for cities is not included in this dataset. Zones are adopted by ordinances with specific technicalities for each community. Land Use designations offer a broad spectrum of allowable uses within a community. It is used to create a Comprehensive Plan Map or used for a Generalized Proposed Land Use Map or GPLUM. This dataset is also used to create the Land Use Designations theme, which covers proposed zoning use. The meaning of proposed is that the property might not be currently used for the purpose stated. It should be noted that Council adopted amendments to land use designations/zoning that will be effective at the beginning of 2006. Also, the Council is in the process of adopting the Mid-County Community Plan which amends land use designations/zoning as well. The Cities polygons found in the zoning data does not necessarily match the current cities boundaries. This is because the zoning data is updated once a year per the "Pierce County Comprehensive Plan" and does not allow for changes to be made during the year. The Comprehensive Plan is generally updated in November and generally becomes effective the following March. Use the "Cities in Pierce County" data set to determine current city boundaries. City boundaries can change more often than the current adopted Pierce County Zoning data. The zoning data contains the "Cities in Pierce County" boundaries at the time that the Pierce County Zoning was adopted. When determining the current zoning of a parcel near a city, the current "Cities in Pierce County" data set needs to be reviewed. Zoning codes for parcels within incorporated cities are determined by the city that the parcel is within.Please read metadata for additional information https://matterhorn.piercecountywa.gov/GISmetadata/pdbplan_zoning.html). Any data download constitutes acceptance of the Terms of Use (https://matterhorn.piercecountywa.gov/disclaimer/PierceCountyGISDataTermsofUse.pdf).