This dataset represents real property information within a parcel of land in the City of Baltimore. The data dictionary for this dataset can be accessed by visiting the following link.: Data Dictionary For Real Property Information | Open Baltimore (baltimorecity.gov). Data is updated on a weekly basis. To leave feedback or ask a question about this dataset, please fill out the following form: Real Property Information feedback form.

Outlines the boundaries of the Baltimore County Historic Districts. The agreement by the owners of 75 percent of the property within a proposed district’s boundary is required to form a local historic district. Any exterior modification or addition to a structure in a district, or any excavation building, or demolition permit, is subject to approval by the Landmarks Preservation Commission.

This feature class represents the petitioned sewer master plan areas that have been introduced in previous years through cycle amendments within Baltimore County. Unlike the SHisMasterPlan feature class, this feature class does not distinguish between different cycle amendment petitions and only reflects the most current sewer master plan designation.The sewer master plan geodatabase includes a feature data set (sewerMasterPlan) containing three feature classes: SCurMasterPlan, sewerCombined and SHisMasterPlan. The feature classes participate in a topology (tsewerMasterPlan). The SCurMasterPlan feature class represents the petitions for the current cycle. The sewerCombined represents the current master plan designation within the county. The SHisMasterPlan contains all of the petitions areas from all cycles. The geodatabase includes relationship classes that associate related table containing information on assessments, councilmanic districts, election districts, lineage (feature level metadata), plan map, recommendations and zoning designations.

Boundaries of plats for Baltimore County.

This layer is a high-resolution tree canopy change-detection layer for Baltimore City, MD. It contains three tree-canopy classes for the period 2007-2015: (1) No Change; (2) Gain; and (3) Loss. It was created by extracting tree canopy from existing high-resolution land-cover maps for 2007 and 2015 and then comparing the mapped trees directly. Tree canopy that existed during both time periods was assigned to the No Change category while trees removed by development, storms, or disease were assigned to the Loss class. Trees planted during the interval were assigned to the Gain category, as were the edges of existing trees that expanded noticeably. Direct comparison was possible because both the 2007 and 2015 maps were created using object-based image analysis (OBIA) and included similar source datasets (LiDAR-derived surface models, multispectral imagery, and thematic GIS inputs). OBIA systems work by grouping pixels into meaningful objects based on their spectral and spatial properties, while taking into account boundaries imposed by existing vector datasets. Within the OBIA environment a rule-based expert system was designed to effectively mimic the process of manual image analysis by incorporating the elements of image interpretation (color/tone, texture, pattern, location, size, and shape) into the classification process. A series of morphological procedures were employed to insure that the end product is both accurate and cartographically pleasing. No accuracy assessment was conducted, but the dataset will be subjected to manual review and correction. 2006 LiDAR and 2014 LiDAR data was also used to assist in tree canopy change.

Baltimore County's Urban Rural Demarcation Line (URDL) has divided the county into "urban" and "rural" areas since established by the Planning Board in 1967. Developed primarily as a growth management tool, it has influenced zoning, land-use, and infrustructure decisions, and was the baseline for the Baltimore County part of Maryland's Priority Funding Area. However, this boundary (digitized at a scale of 1:24,000 where 1" represents 2,000') was became obsolete as the county's GIS data increased in resolution (to 1:2,400 where 1" represents 200'). Until recently, determining a property's status as either urban or rural was of a highly interpretative nature. A new URDL was developed to more accurately match the 1:2,400 data (parcel, street centerline, zoning, etc). This version was reviewed and modified in a series of meetings with several interested county agencies. The new URDL removes much of the old one's ambiguity while keeping its original intent. The new URDL was reviewed, modified, and subsequently approved by the Planning Board on June 19, 2003. Minor revisions were effected 9/2/04, 10/21/04, 9/4/07, 5/21/09, 10/1/09 and 11/15/12. The URDL_poly feature class is one part of the URDL feature dataset.

Feature class contains all contour lines for Baltimore County. Contours are captured in 2 foot intervals. Contours were created from LiDAR captured to meet or exceed the FEMA QL 2 specification. LiDAR was captured in April of 2014.

The MetroDistrict feature class contains the current land area included in the metropolitan district in Baltimore County. The metropolitan district is a land planning area determines the status of whether or not a property is eligible for public water and sewer services.The metropolitan district geodatabase includes the MetroDistrict, MetroDistrictLine, MetroDistrictPoly, MetroDistrictMargin feature classes and BCMDLineage table.

State of Maryland municipality boundary dataset.Maryland Department of Planning (MDP) maps annexations from municipalities. This dataset is created and maintained by the Maryland Department of Planning. These boundaries are not intended to serve as a legal description. Fields:MUN_NAME (Municipality Name): Name of Municipality located in Maryland.RESOLUTION_NUMBER (Resolution Number): Local Municipality Annexation Resolution Number.ANNEXATION_DATE (Annexation Date) (DD/MM/YYYY): The Annexation Date field shows when there's been a change in the boundary. This date is known as the “Effective Date” from the municipality. The date 1/1/1997 is used as a default date of when annexation changes were first indicated in the GIS layer and not necessarily of when it was actually annexed. If there's a date of 1/1/1997, it can be assumed that the annexation occurred on this date or before. For example, for Baltimore City, the city boundary was determined hundreds of years ago. Other than that default date, the date will show when the property was annexed. ACRES (GIS Acres): GIS calculated acresJURSCODE (Jurisdiction Code) – Four letter county code: ALLE (Allegany), ANNE (Anne Arundel), BACI (Baltimore City), BACO (Baltimore County), CALV (Calvert), CARO (Caroline), CARR (Carroll), CECI (Cecil), CHAR (Charles), DORC (Dorchester), FRED (Frederick), GARR (Garrett), HARF (Harford), HOWA (Howard), KENT (Kent), MONT (Montgomery), PRIN (Prince George’s) QUEE (Queen Anne’s), SOME (Somerset), STMA (St. Mary’s), TALB (Talbot), WASH (Washington), WICO (Wicomico), WORC (Worcester).

This map features shaded relief imagery, bathymetry and coastal water features that provide neutral background with political boundaries and placenames for reference purposes. The map is intended to support the ArcGIS Online basemap gallery. For more details on the map, please visit the World Hillshade and Terrain with Labels.

The Charted Territory Map (World Edition) web map provides a customized world basemap uniquely symbolized. It takes its inspiration from a printed atlas plate and pull-down scholastic classroom maps. The map emphasizes the geographic and political features in the design. The use of country level polygons are preassigned with eight different colors. It also includes the global graticule features as well as landform labels of physical features and hillshade. This basemap, included in the ArcGIS Living Atlas of the World, uses the Charted Territory vector tile layer and World Hillshade. The vector tile layer in this web map is built using the same data sources used for other Esri Vector Basemaps. For details on data sources contributed by the GIS community, view the map of Community Maps Basemap Contributors. Esri Vector Basemaps are updated monthly.Use this MapThis map is designed to be used as a basemap for overlaying other layers of information or as a stand-alone reference map. You can add layers to this web map and save as your own map. If you like, you can add this web map to a custom basemap gallery for others in your organization to use in creating web maps. If you would like to add this map as a layer in other maps you are creating, you may use the layers referenced in this map.

The USGS Topo base map service from The National Map is a combination of contours, shaded relief, woodland and urban tint, along with vector layers, such as geographic names, governmental unit boundaries, hydrography, structures, and transportation, to provide a composite topographic base map. Data sources are the National Atlas for small scales, and The National Map for medium to large scales.

Subdivision boundaries for Baltimore County.

These data provide an accurate high-resolution shoreline compiled from imagery of Port of Baltimore, MD . This vector shoreline data is based on an office interpretation of imagery that may be suitable as a geographic information system (GIS) data layer. This metadata describes information for both the line and point shapefiles. The NGS attribution scheme 'Coastal Cartographic Object Attribut...

Tags

   soil survey, soils, Soil Survey Geographic, SSURGO




   Summary


   SSURGO depicts information about the kinds and distribution of

   soils on the landscape. The soil map and data used in the SSURGO

   product were prepared by soil scientists as part of the National

   Cooperative Soil Survey.


   Description


   This data set is a digital soil survey and generally is the most

   detailed level of soil geographic data developed by the National

   Cooperative Soil Survey. The information was prepared by digitizing

   maps, by compiling information onto a planimetric correct base

   and digitizing, or by revising digitized maps using remotely

   sensed and other information.


   This data set consists of georeferenced digital map data and

   computerized attribute data. The map data are in a 3.75 minute

   quadrangle format and include a detailed, field verified inventory

   of soils and nonsoil areas that normally occur in a repeatable

   pattern on the landscape and that can be cartographically shown at

   the scale mapped. A special soil features layer (point and line

   features) is optional. This layer displays the location of features

   too small to delineate at the mapping scale, but they are large

   enough and contrasting enough to significantly influence use and

   management. The soil map units are linked to attributes in the

   National Soil Information System relational database, which gives

   the proportionate extent of the component soils and their properties.


   Credits

   There are no credits for this item.


   Use limitations


   The U.S. Department of Agriculture, Natural Resources Conservation

   Service, should be acknowledged as the data source in products

   derived from these data.


   This data set is not designed for use as a primary regulatory tool

   in permitting or citing decisions, but may be used as a reference

   source. This is public information and may be interpreted by

   organizations, agencies, units of government, or others based on

   needs; however, they are responsible for the appropriate

   application. Federal, State, or local regulatory bodies are not to

   reassign to the Natural Resources Conservation Service any

   authority for the decisions that they make. The Natural Resources

   Conservation Service will not perform any evaluations of these maps

   for purposes related solely to State or local regulatory programs.


   Photographic or digital enlargement of these maps to scales greater

   than at which they were originally mapped can cause misinterpretation

   of the data. If enlarged, maps do not show the small areas of

   contrasting soils that could have been shown at a larger scale. The

   depicted soil boundaries, interpretations, and analysis derived from

   them do not eliminate the need for onsite sampling, testing, and

   detailed study of specific sites for intensive uses. Thus, these data

   and their interpretations are intended for planning purposes only.

   Digital data files are periodically updated. Files are dated, and

   users are responsible for obtaining the latest version of the data.


   Extent



   West -76.713689  East -76.526117 

   North 39.374398  South 39.194856 




   Scale Range

   There is no scale range for this item.

The LOMA feature class contains features for each address for which a LOMA has been issued by the Federal Emergency Management Agency (FEMA). A LOMA can affect flood zone determination without a map change. The feature class was created by interpreting the information contained on each LOMA and mapping the location(s) for each of the addresses cited in the document. A PDF of the LOMA document was associated to the feature as an attachment. For addresses having more than one LOMA, only a single feature was created and additional attachments were associated to the feature. This feature class contains “historical” LOMA location/documents not revalidated by FEMA.

The Human Geography Map (World Edition) web map provides a detailed vector basemap with a monochromatic style and content adjusted to support Human Geography information. Where possible, the map content has been adjusted so that it observes WCAG contrast criteria.This basemap, included in the ArcGIS Living Atlas of the World, uses 3 vector tile layers:Human Geography Label, a label reference layer including cities and communities, countries, administrative units, and at larger scales street names.Human Geography Detail, a detail reference layer including administrative boundaries, roads and highways, and larger bodies of water. This layer is designed to be used with a high degree of transparency so that the detail does not compete with your information. It is set at approximately 50% in this web map, but can be adjusted.Human Geography Base, a simple basemap consisting of land areas in a very light gray only.The vector tile layers in this web map are built using the same data sources used for other Esri Vector Basemaps. For details on data sources contributed by the GIS community, view the map of Community Maps Basemap Contributors. Esri Vector Basemaps are updated monthly.Learn more about this basemap from the cartographic designer in Introducing a Human Geography Basemap.Use this MapThis map is designed to be used as a basemap for overlaying other layers of information or as a stand-alone reference map. You can add layers to this web map and save as your own map. If you like, you can add this web map to a custom basemap gallery for others in your organization to use in creating web maps. If you would like to add this map as a layer in other maps you are creating, you may use the tile layer item referenced in this map.

In 1984, the General Assembly enacted the Chesapeake Bay Critical Area Act to regulate development, manage land use and conserve natural resources on land in those areas designated as Critical Area. For this document, the Critical Area is all land and water areas within 1,000 feet of the tidal waters' edge or from the landward edge of adjacent tidal wetlands and the lands under them. Georeferenced digital data files of the critical Area have been produced for Baltimore City and the 16 Maryland counties with land located within the Critical Area. The digital maps produced for each jurisdiction are polygons depicting the Critical Area and the land use classifications recognized by the Chesapeake Bay Critical Area Commission (CBCAC). Each jurisdiction is a separate file. The data were produced from hard copy parcel maps originally submitted by the counties as part of the requirements for developing their Critical Area Program. For the purpose of the Mdimap web service the Critical Area Data is displayed by two data layers, one general layer and one layer showing the available critical area data for local towns.This data set represents the Department of Natural Resources interpretation of the location and extent of the Critical Area; however, the digital maps are not recognized as the "official" maps. In accordance with Subsection 8-1807(a) of the Critical Area Act, the Critical Area consists of (1) All waters and lands under the Chesapeake Bay and its tributaries to the head of tide as indicated on the State wetland maps, and all State and private wetlands designated under Environment Article, Title 16, annotated Code of Maryland; (2) All land and water areas within 1,000 feet beyond the landward boundaries of State or private wetlands and the of tides designated under Environment Article, Article 16, Annotated Code of Maryland; and (3) Modification to these areas through inclusions or exclusions proposed by local jurisdictions and approved by Commission as specified in Natural Resources Article, Subsection 8-1807, annotated Code of Maryland. These maps are hard copy maps that cannot be exactly replicated in a digital format; therefore, some interpretation was necessary to create the digital line. Hard copy maps depicting the official Critical Area boundary line are available for review at the Chesapeake Bay Critical Area Commission, and at most local planning and zoning departments. The Department of Natural Resources makes no warranty, expressed or implied, as to the use or appropriateness of Spatial Data, and there are no warranties of merchantability or fitness for a particular purpose or use. The intended use is for general information and planning purposes. It is not intended to be used to determine the exact location of the Critical Area boundary on a specific parcel or to determine the acreage within the Critical Area on a specific site. The information contained in Spatial Data is from publicly available sources, but no representation is made as to the accuracy or completeness of Spatial Data. The Department of Natural Resources shall not be subject to liability for human error, error due to software conversion, defect, or failure of machines, or any material used in the connection with the machines, including tapes, disks, CD-ROMs or DVD-ROMs and energy. The Department of Natural Resources shall not be liable for any lost profits, consequential damages, or claims against the Department of Natural Resources by third parties. The liability of the Department of Natural Resources for damage regardless of the form of the action shall not exceed any distribution fees that may have been paid in obtaining Spatial Data.There were many parties involved in producing Maryland's Critical Area data and the key parties will be listed. Each county and city (listed below) produced a hard copy map and submitted the map to the Chesapeake Bay Critical Area Commission (CBCAC) for approval. Through Coastal Zone Management grants, CBCAC digit

The Int_2016 feature class combined with the TZ_2016 feature class represents the intersections with a level of service rating of D, E or F and the associated commutershed as represented on the 2016 Transportation Basic Services Map. The 2016 Transportation Basic Services Map was enacted under bill number 18-16 and is part of the Baltimore County Zoning Regulations, 1955 as amended by the bill adopted May 2, 2016. Effective May 16, 2016.

This map features recent high-resolution National Agriculture Imagery Program (NAIP) imagery for the United States and is optimized for display quality and performance. The map also includes a reference layer.This NAIP imagery is from the USDA Farm Services Agency. The NAIP imagery in this layer has been visually enhanced and published as a tile layer for optimal display performance.NAIP imagery collection occurs on an annual basis during the agricultural growing season in the continental United States. Approximately half of the US is collected each year and each state is typically collected every other year. The NAIP program aims to make the imagery available to governmental agencies and to the public within a year of collection.This layer will be updated each year, as the latest imagery is received and processed. Currently, it is primarily composed of NAIP imagery from 2018 and 2019.Use the NAIP Imagery Metadata layer as an overlay to access detailed information about each image in this tile layer. With the metadata layer, a user can point and click any location within the continental US to access information such as collection date and resolution for the imagery at that location.While this tile layer is intended for visualization, the Living Atlas also provides the following NAIP layers for image analysis:USA NAIP Imagery: Natural ColorUSA NAIP Imagery: Color InfraredUSA NAIP Imagery: NDVI