In 2023, Washington, D.C. had the highest population density in the United States, with 11,130.69 people per square mile. As a whole, there were about 94.83 residents per square mile in the U.S., and Alaska was the state with the lowest population density, with 1.29 residents per square mile. The problem of population density Simply put, population density is the population of a country divided by the area of the country. While this can be an interesting measure of how many people live in a country and how large the country is, it does not account for the degree of urbanization, or the share of people who live in urban centers. For example, Russia is the largest country in the world and has a comparatively low population, so its population density is very low. However, much of the country is uninhabited, so cities in Russia are much more densely populated than the rest of the country. Urbanization in the United States While the United States is not very densely populated compared to other countries, its population density has increased significantly over the past few decades. The degree of urbanization has also increased, and well over half of the population lives in urban centers.
https://www.icpsr.umich.edu/web/ICPSR/studies/13400/termshttps://www.icpsr.umich.edu/web/ICPSR/studies/13400/terms
The numbers contained in this study are released pursuant to the order of the United States Court of Appeals for the Ninth Circuit in Carter v. Department of Commerce, 307 F.3d 1084. These numbers are not official Census 2000 counts. These numbers are estimates of the population based on a statistical adjustment method, utilizing sampling and modeling, applied to the official Census 2000 figures. The estimates utilized the results of the Accuracy and Coverage Evaluation (A.C.E.), a sample survey intended to measure net over- and undercounts in the census results. The Census Bureau has determined that the A.C.E. estimates dramatically overstate the level of undercoverage in Census 2000, and that the adjusted Census 2000 data are, therefore, not more accurate than the unadjusted data. On March 6, 2001, the Secretary of Commerce decided that unadjusted data from Census 2000 should be used to tabulate population counts reported to states and localities pursuant to 13 U.S.C. 141(c) (see 66 FR 14520, March 13, 2001). The Secretary's decision endorsed the unanimous recommendation of the Executive Steering Committee for A.C.E. Policy (ESCAP), a group of 12 senior career professionals within the Census Bureau. The ESCAP, in its recommendation against the use of the statistically adjusted estimates, had noted serious reservations regarding their accuracy. In order to inform the Census Bureau's planned October 2001 decision regarding the potential use of the adjusted estimates for non-redistricting purposes, the agency conducted extensive analyses throughout the summer of 2001. These extensive analyses confirmed the serious concerns the agency had noted earlier regarding the accuracy of the A.C.E. estimates. Specifically, the adjusted estimates were determined to be so severely flawed that all potential uses of these data would be inappropriate. Accordingly, the Department of Commerce deems that these estimates should not be used for any purpose that legally requires use of data from the decennial census and assumes no responsibility for the accuracy of the data for any purpose whatsoever. The Department, including the U.S. Census Bureau, will provide no assistance in the interpretation or use of these numbers. The collection contains four tables: (1) a count of all persons by race (Table PL1), (2) a count of Hispanic or Latino and a count of not Hispanic or Latino by race of all persons (Table PL2), (3) a count of the population 18 years and older by race (Table PL3), and (4) a count of Hispanic or Latino and a count of not Hispanic or Latino by race for the population 18 years and older (Table PL4).
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
Context
This list ranks the 50 states in the United States by Non-Hispanic Some Other Race (SOR) population, as estimated by the United States Census Bureau. It also highlights population changes in each states over the past five years.
When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 5-Year Estimates, including:
Variables / Data Columns
Good to know
Margin of Error
Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.
Custom data
If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.
Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.
In 2023, California had the highest Hispanic population in the United States, with over 15.76 million people claiming Hispanic heritage. Texas, Florida, New York, and Illinois rounded out the top five states for Hispanic residents in that year. History of Hispanic people Hispanic people are those whose heritage stems from a former Spanish colony. The Spanish Empire colonized most of Central and Latin America in the 15th century, which began when Christopher Columbus arrived in the Americas in 1492. The Spanish Empire expanded its territory throughout Central America and South America, but the colonization of the United States did not include the Northeastern part of the United States. Despite the number of Hispanic people living in the United States having increased, the median income of Hispanic households has fluctuated slightly since 1990. Hispanic population in the United States Hispanic people are the second-largest ethnic group in the United States, making Spanish the second most common language spoken in the country. In 2021, about one-fifth of Hispanic households in the United States made between 50,000 to 74,999 U.S. dollars. The unemployment rate of Hispanic Americans has fluctuated significantly since 1990, but has been on the decline since 2010, with the exception of 2020 and 2021, due to the impact of the coronavirus (COVID-19) pandemic.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
Context
This list ranks the 50 states in the United States by Multi-Racial Asian population, as estimated by the United States Census Bureau. It also highlights population changes in each states over the past five years.
When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 5-Year Estimates, including:
Variables / Data Columns
Good to know
Margin of Error
Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.
Custom data
If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.
Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.
The U.S. landscape has undergone substantial changes since Europeans first arrived. Many land use changes are attributable to human activity. Historical data concerning these changes are frequently limited and often difficult to develop. Modeling historical land use changes may be necessary. We develop annual population series from first European settlement to 1999 for all 50 states and Washington D.C. for use in modeling land use trends. Extensive research went into developing the historical data. Linear interpolation was used to complete the series after critically evaluating the appropriateness of linear interpolation versus exponential interpolation.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
United States Population: All Ages data was reported at 325,719.000 Person th in 2017. This records an increase from the previous number of 323,406.000 Person th for 2016. United States Population: All Ages data is updated yearly, averaging 176,356.000 Person th from Jun 1900 (Median) to 2017, with 118 observations. The data reached an all-time high of 325,719.000 Person th in 2017 and a record low of 76,094.000 Person th in 1900. United States Population: All Ages data remains active status in CEIC and is reported by US Census Bureau. The data is categorized under Global Database’s United States – Table US.G002: Population by Age. Series Remarks Population data for the years 1900 to 1949 exclude the population residing in Alaska and Hawaii. Population data for the years 1940 to 1979 cover the resident population plus Armed Forces overseas. Population data for all other years cover only the resident population.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
Context
The dataset tabulates the population of United States by gender across 18 age groups. It lists the male and female population in each age group along with the gender ratio for United States. The dataset can be utilized to understand the population distribution of United States by gender and age. For example, using this dataset, we can identify the largest age group for both Men and Women in United States. Additionally, it can be used to see how the gender ratio changes from birth to senior most age group and male to female ratio across each age group for United States.
Key observations
Largest age group (population): Male # 30-34 years (11.65 million) | Female # 30-34 years (11.41 million). Source: U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates.
When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates.
Age groups:
Scope of gender :
Please note that American Community Survey asks a question about the respondents current sex, but not about gender, sexual orientation, or sex at birth. The question is intended to capture data for biological sex, not gender. Respondents are supposed to respond with the answer as either of Male or Female. Our research and this dataset mirrors the data reported as Male and Female for gender distribution analysis.
Variables / Data Columns
Good to know
Margin of Error
Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.
Custom data
If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.
Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.
This dataset is a part of the main dataset for United States Population by Gender. You can refer the same here
This graph shows the population density of the United States of America from 1790 to 2019. In 2019, the population density was approximately 92.9 residents per square mile of land area. Population density in the United States Population density has been tracked for over two hundred years in the United States. Over the last two centuries, the number of people living in the United States per square mile has grown from 4.5 in 1790 to 87.4 in 2010. After examining the data in detail, it becomes clear that a major population increase started around 1870. Population density was roughly 11 at the time and has doubled in the last century. Since then, population density grew by about 16 percent each decade. Population density doubled in 1900, and grew in total by around 800 percent until 2010.
The population density of the United States varies from state to state. The most densely populated state is New Jersey, with 1,208 people per square mile living there. Rhode Island is the second most densely populated state, with slightly over 1,000 inhabitants per square mile. A number of New England states follow at the top of the ranking, making the northeastern region of the United States the most densely populated region of the country.
The least populated U.S. state is the vast territory of Alaska. Only 1.3 inhabitants per square mile reside in the largest state of the U.S.
Compared to other countries around the world, the United States does not rank within the top 50, in terms of population density. Most of the leading countries and territories are city states. However, the U.S. is one of the most populous countries in the world, with a total population of over 327 million inhabitants, as of 2018.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
Context
This list ranks the 50 states in the United States by Non-Hispanic White population, as estimated by the United States Census Bureau. It also highlights population changes in each states over the past five years.
When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 5-Year Estimates, including:
Variables / Data Columns
Good to know
Margin of Error
Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.
Custom data
If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.
Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.
In 2024, the most populated federal state in Germany is North Rhine-Westphalia in the west, with a population of almost 18 million. The state capital is Düsseldorf. Bavaria and Baden-Württemberg in the south rounded up the top three, both with over 10 million inhabitants.
Public Law 94-171, enacted in 1975, requires the Census Bureau to provide redistricting data in a format requested by state governments. Within one year following the 1990 decennial Census (by April 1, 1991), the Census Bureau provided the governor and legislature of each state with the population data needed to redraw legislative districts. This collection contains the same substantive and geographic variables as the original Public Law 94-171 files [see CENSUS OF POPULATION AND HOUSING, 1990 [UNITED STATES]: PUBLIC LAW (P.L.) 94-171 DATA (ICPSR 9516)] but with the population counts adjusted for undernumeration. Adjusted Public Law 94-171 counts are supplied for a sample of one-half of blocks in the United States and a complete selection of areas with 1,000 or more persons. Each state file provides data for the state and its subareas in the following order: state, county, voting district, county subdivision, place, and block. Additionally, complete summaries are provided for the following geographic areas: county subdivision, place, consolidated city, state portion of American Indian and Alaska Native area, and county portion of American Indian and Alaska Native area. Area characteristics such as land area, water area, latitude, and longitude are provided. Summary statistics are provided for all persons, for persons 18 years old and over, and for housing units in the geographic areas. Counts by race and by Hispanic and non-Hispanic origin are also recorded.
This layer shows Population by Age and Sex. This is shown by state and county boundaries. This service contains the 2018-2022 release of data from the American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. This layer is symbolized to show the Total population ages 65 and over. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top right. Current Vintage: 2018-2022ACS Table(s): B01001, B01002, DP05Data downloaded from: Census Bureau's API for American Community Survey Date of API call: January 18, 2024National Figures: data.census.govThe United States Census Bureau's American Community Survey (ACS):About the SurveyGeography & ACSTechnical DocumentationNews & UpdatesThis ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. Please cite the Census and ACS when using this data.Data Note from the Census:Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables.Data Processing Notes:Boundaries come from the Cartographic Boundaries via US Census TIGER geodatabases. Boundaries are updated at the same time as the data updates, and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines clipped for cartographic purposes. For state and county boundaries, the water and coastlines are derived from the coastlines of the 500k TIGER Cartographic Boundary Shapefiles. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico. The Counties (and equivalent) layer contains 3221 records - all counties and equivalent, Washington D.C., and Puerto Rico municipios. See Areas Published. Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey.Field alias names were created based on the Table Shells.Margin of error (MOE) values of -555555555 in the API (or "*****" (five asterisks) on data.census.gov) are displayed as 0 in this dataset. The estimates associated with these MOEs have been controlled to independent counts in the ACS weighting and have zero sampling error. So, the MOEs are effectively zeroes, and are treated as zeroes in MOE calculations. Other negative values on the API, such as -222222222, -666666666, -888888888, and -999999999, all represent estimates or MOEs that can't be calculated or can't be published, usually due to small sample sizes. All of these are rendered in this dataset as null (blank) values.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
United States Population Estimates Program: Population: Resident data was reported at 341,414.000 Person th in Mar 2025. This records an increase from the previous number of 341,272.000 Person th for Feb 2025. United States Population Estimates Program: Population: Resident data is updated monthly, averaging 288,444.500 Person th from Apr 1980 (Median) to Mar 2025, with 540 observations. The data reached an all-time high of 341,414.000 Person th in Mar 2025 and a record low of 226,546.000 Person th in Apr 1980. United States Population Estimates Program: Population: Resident data remains active status in CEIC and is reported by U.S. Census Bureau. The data is categorized under Global Database’s United States – Table US.G001: Monthly Population Estimates.
Population, housing, vital statistics, health, social and human services, education, law enforcement, courts, correction, environment, recreation, energy, utilities, government, employment, income, business, industry, agriculture, and transportation information for the United States and all states.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
United States Population: Michigan data was reported at 9,962,311.000 Person in 2017. This records an increase from the previous number of 9,933,445.000 Person for 2016. United States Population: Michigan data is updated yearly, averaging 9,966,019.000 Person from Jun 2000 (Median) to 2017, with 18 observations. The data reached an all-time high of 10,090,554.000 Person in 2005 and a record low of 9,876,199.000 Person in 2011. United States Population: Michigan data remains active status in CEIC and is reported by US Census Bureau. The data is categorized under Global Database’s United States – Table US.G003: Population by State.
https://www.icpsr.umich.edu/web/ICPSR/studies/9575/termshttps://www.icpsr.umich.edu/web/ICPSR/studies/9575/terms
This collection provides 100-percent data for states and their subareas in hierarchical sequence down to the block group level. Also included are complete summaries for places, census tract/block numbering areas, block groups, congressional districts, and consolidated cities. Population items include age, race, sex, marital status, Hispanic origin, household type, and household relationship. Population items are crosstabulated by age, race, Hispanic origin, or sex. Housing items include occupancy/vacancy status, tenure, units in structure, contract rent, meals included in rent, value, and number of rooms in housing unit. Housing data are crosstabulated by race or Hispanic origin of householder or by tenure. Selected aggregates and medians are also provided. Data are presented in 37 population tables and 63 housing tables. The file for Puerto Rico (Part 72) also contains 100-percent data in hierarchical sequence down to the block group level. Also included are complete summaries for sub-barrio, census track/block numbering areas, block group, municipio, and place. The population items include age, sex, marital status, group quarters, household type, and household relationship. Population items are crosstabulated by age and sex. Housing items include occupancy/vacancy status, tenure, units in structure, contract rent, plumbing facilities, condominium status, value, and number of rooms in housing unit. Housing data are crosstabulated by tenure. Selected aggregates and medians are also provided. Data are presented in 26 population tables and 48 housing tables.
The GIS of Mexican States, Municipalities and Islands consists of attribute and boundary data for 1990. The attribute data include population, language, education, literacy, housing Units and land cover classification from the 1990 Mexican population and housing census. The boundary data associated with the United States-Mexico border are consistent with the U.S. Census Bureau TIGER95 data. This data set is produced by the Columbia University Center for International Earth Science Information Network (CIESIN).
The population using public supply drinking water was mapped in two ways: the census enhanced method (CEM) evenly distributes the population across the census block-group, and the urban land-use enhanced method (ULUEM) distributes the population only to certain urban land use designations in order to more precisely locate public supply users. This dataset consists of the total estimated population using public supply surface water and groundwater combined, distributed across block-groups.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
United States US: Urban Population data was reported at 267,278,643.000 Person in 2017. This records an increase from the previous number of 264,746,567.000 Person for 2016. United States US: Urban Population data is updated yearly, averaging 184,283,180.000 Person from Dec 1960 (Median) to 2017, with 58 observations. The data reached an all-time high of 267,278,643.000 Person in 2017 and a record low of 126,462,473.000 Person in 1960. United States US: Urban Population data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s United States – Table US.World Bank.WDI: Population and Urbanization Statistics. Urban population refers to people living in urban areas as defined by national statistical offices. It is calculated using World Bank population estimates and urban ratios from the United Nations World Urbanization Prospects. Aggregation of urban and rural population may not add up to total population because of different country coverages.; ; World Bank staff estimates based on the United Nations Population Division's World Urbanization Prospects: 2018 Revision.; Sum;
In 2023, Washington, D.C. had the highest population density in the United States, with 11,130.69 people per square mile. As a whole, there were about 94.83 residents per square mile in the U.S., and Alaska was the state with the lowest population density, with 1.29 residents per square mile. The problem of population density Simply put, population density is the population of a country divided by the area of the country. While this can be an interesting measure of how many people live in a country and how large the country is, it does not account for the degree of urbanization, or the share of people who live in urban centers. For example, Russia is the largest country in the world and has a comparatively low population, so its population density is very low. However, much of the country is uninhabited, so cities in Russia are much more densely populated than the rest of the country. Urbanization in the United States While the United States is not very densely populated compared to other countries, its population density has increased significantly over the past few decades. The degree of urbanization has also increased, and well over half of the population lives in urban centers.