China is a vast and diverse country and population density in different regions varies greatly. In 2023, the estimated population density of the administrative area of Shanghai municipality reached about 3,922 inhabitants per square kilometer, whereas statistically only around three people were living on one square kilometer in Tibet. Population distribution in China China's population is unevenly distributed across the country: while most people are living in the southeastern half of the country, the northwestern half – which includes the provinces and autonomous regions of Tibet, Xinjiang, Qinghai, Gansu, and Inner Mongolia – is only sparsely populated. Even the inhabitants of a single province might be unequally distributed within its borders. This is significantly influenced by the geography of each region, and is especially the case in the Guangdong, Fujian, or Sichuan provinces due to their mountain ranges. The Chinese provinces with the largest absolute population size are Guangdong in the south, Shandong in the east and Henan in Central China. Urbanization and city population Urbanization is one of the main factors which have been reshaping China over the last four decades. However, when comparing the size of cities and urban population density, one has to bear in mind that data often refers to the administrative area of cities or urban units, which might be much larger than the contiguous built-up area of that city. The administrative area of Beijing municipality, for example, includes large rural districts, where only around 200 inhabitants are living per square kilometer on average, while roughly 20,000 residents per square kilometer are living in the two central city districts. This is the main reason for the huge difference in population density between the four Chinese municipalities Beijing, Tianjin, Shanghai, and Chongqing shown in many population statistics.

This statistic shows the population density in urban areas of China in 2023, by region. In 2023, cities in Heilongjiang province had the highest population density in China with around 5,361 people living on one square kilometer on average. However, as the administrative areas of many Chinese cities reach beyond their contiguous built-up urban areas - and this by varying degree, the statistical significance of the given figures may be limited. By comparison, the Chinese province with the highest overall population density is Jiangsu province in Eastern China reaching about 7956 people per square kilometer in 2023.

WorldPop produces different types of gridded population count datasets, depending on the methods used and end application. Please make sure you have read our Mapping Populations overview page before choosing and downloading a dataset.

Datasets are available to download in Geotiff and ASCII XYZ format at a resolution of 30 arc-seconds (approximately 1km at the equator)

-Unconstrained individual countries 2000-2020: Population density datasets for all countries of the World for each year 2000-2020 – derived from the corresponding Unconstrained individual countries 2000-2020 population count datasets by dividing the number of people in each pixel by the pixel surface area. These are produced using the unconstrained top-down modelling method.
-Unconstrained individual countries 2000-2020 UN adjusted: Population density datasets for all countries of the World for each year 2000-2020 – derived from the corresponding Unconstrained individual countries 2000-2020 population UN adjusted count datasets by dividing the number of people in each pixel, adjusted to match the country total from the official United Nations population estimates (UN 2019), by the pixel surface area. These are produced using the unconstrained top-down modelling method.

Data for earlier dates is available directly from WorldPop.

WorldPop (www.worldpop.org - School of Geography and Environmental Science, University of Southampton; Department of Geography and Geosciences, University of Louisville; Departement de Geographie, Universite de Namur) and Center for International Earth Science Information Network (CIESIN), Columbia University (2018). Global High Resolution Population Denominators Project - Funded by The Bill and Melinda Gates Foundation (OPP1134076). https://dx.doi.org/10.5258/SOTON/WP00674

In 2022, the estimated population density of China was around 150.42 people per square kilometer. That year, China's population size declined for the first time in decades. Although China is the most populous country in the world, its overall population density is not much higher than the average population density in Asia. Uneven population distribution China is one of the largest countries in terms of land area, and its population density figures vary dramatically from region to region. Overall, the coastal regions in the East and Southeast have the highest population densities, as they belong to the more economically developed regions of the country. These coastal regions also have a higher urbanization rate. On the contrary, the regions in the West are covered with mountain landscapes which are not suitable for the development of big cities. Populous cities in China Several Chinese cities rank among the most populous cities in the world. According to estimates, Beijing and Shanghai will rank among the top ten megacities in the world by 2030. Both cities are also the largest Chinese cities in terms of land area. The previous colonial regions, Macao and Hong Kong, are two of the most densely populated cities in the world.

Taiwan (Province of China) population density for 400m H3 hexagons.

Built from Kontur Population: Global Population Density for 400m H3 Hexagons Vector H3 hexagons with population counts at 400m resolution.

Fixed up fusion of GHSL, Facebook, Microsoft Buildings, Copernicus Global Land Service Land Cover, Land Information New Zealand, and OpenStreetMap data.

By the end of 2022, the population density in Henan province in China increased to around 591 people per square kilometer. Henan is one of the most populous provinces in China. It is located in China's middle region, next to Hebei, Shanxi, Shaanxi, Anhui and Hubei.

Taiwan, Province Of China administrative division with aggregated population. Built from Kontur Population: Global Population Density for 400m H3 Hexagons on top of OpenStreetMap administrative boundaries data. Enriched with HASC codes for regions taken from Wikidata.
Global version of boundaries dataset: Kontur Boundaries: Global administrative division with aggregated population

As of 2023, the population density in Guangdong province in China was around 707 persons per square kilometer. Guangdong is the most populous province in China, and its population density is higher than in many countries in the world.

This layer shows the Hong Kong population density in 2021 Population Census. It is a subset of the census data 2021 made available by the Census and Statistics Department under the Government of Hong Kong Special Administrative Region (the “Government”) at https://DATA.GOV.HK/ (“DATA.GOV.HK”). The source data is in XLSX format and has been processed and converted into Esri File Geodatabase format and then uploaded to Esri’s ArcGIS Online platform for sharing and reference purpose. The objectives are to facilitate our Hong Kong ArcGIS Online users to use the data in a spatial ready format and save their data conversion effort.For details about the data, source format and terms of conditions of usage, please refer to the website of DATA.GOV.HK at https://data.gov.hk.

基于SEIR和AI模型的COVID-19流行趋势预测数据，包括中国各省确诊的COVID-19病例数，中国各省的当地人口密度，中国各省的首都GDP，其他中国省份到武汉的距离，中国，在中国各省年平均气温

  年平均降雨量 在中国各省和迁移人口在武汉，中国

Abstract

The World Values Survey (www.worldvaluessurvey.org) is a global network of social scientists studying changing values and their impact on social and political life, led by an international team of scholars, with the WVS association and secretariat headquartered in Stockholm, Sweden. The survey, which started in 1981, seeks to use the most rigorous, high-quality research designs in each country. The WVS consists of nationally representative surveys conducted in almost 100 countries which contain almost 90 percent of the world’s population, using a common questionnaire. The WVS is the largest non-commercial, cross-national, time series investigation of human beliefs and values ever executed, currently including interviews with almost 400,000 respondents. Moreover the WVS is the only academic study covering the full range of global variations, from very poor to very rich countries, in all of the world’s major cultural zones. The WVS seeks to help scientists and policy makers understand changes in the beliefs, values and motivations of people throughout the world. Thousands of political scientists, sociologists, social psychologists, anthropologists and economists have used these data to analyze such topics as economic development, democratization, religion, gender equality, social capital, and subjective well-being. These data have also been widely used by government officials, journalists and students, and groups at the World Bank have analyzed the linkages between cultural factors and economic development.

Geographic coverage

China

Analysis unit

Household Individual

Universe

National Population, Both sexes,18 and more years

Kind of data

Sample survey data [ssd]

Sampling procedure

Sample size: 1000

The sample is a representative national sample of China containing 40 county/city sample units to collect individual level data of, from a political cultural perspective, the values and attitudes currently held by Chinese citizens. With considerations of representativeness, feasibility, and budgetary constrains, it was decided this project would draw a subsidiary probability sample out of a master sample that RCCC created based on its previous national survey on environmental awareness of the general public in China conducted in 1998. The Environmental Awareness Survey, which was used as a master sample, was a national survey conducted through out the entire country. The target population was the same as the one defined for this survey. Through the stratification, the proportionally allocated multi-stage PPS (probability proportional to size) technique was employed in order to obtain the self-weighted household samples. There were different stages in the sampling procedure: Counties and county-level cities are taken as primary sampling units (PSUs). Family households are the basic sampling unit. Demographic data at all levels was obtained from The Demographic Data for Chinese Cities and Counties, 1997, published by the State Bureau of Statistics.

Nation wide, there were 2,860 county-level units for the first stage sampling (including 1,689 counties, 436 county-level cities, and 735 urban district--with administrative rank equivalent to county--in large cities). The total households were 337,659,447. This was the base for establishing the sampling frames. Some readjustments: Taking into account of cost and accessibility, only the provincial capitals (Lhasa and Urumchi) and their surrounding areas in Tibet and Sinkiang were included in the sampling frame; in other remote western provinces, a few areas that are extremely hard to access were left out as well. After such readjustment the sampling frame then includes 2,708 county-level units, of which the total households are 322,002,173. Compared to the target population, there was a 5.3% reduction (152 units) in the first stage sampling units. However, since the population density in the remote areas of the western provinces is very low, the reduction counts merely 1.4% of the total households in the sampling frame. Geographical administrative divisions of China were regarded as the primary labels of stratification, that is, each province was treated as an independent stratum. Allocation of target sampling units among the sampling stages was designed as following: 135 PSUs out of the first sampling (county-level) units; 2 secondary sampling (townshiplevel) units in each of the PSUs; then 2 third sampling (village-level) units in each of the SSUs; 25 households in each of the third sampling units, on average. Based on the proportional stratification principle, sample allocation to strata was proportional to the size of each stratum, by an equal probability of f = .0042%. Within each stratum (province), sample sizes were calculated and allocated proportionally to each of the sampling stages. A self-weighted national sample thus was obtained.

Multi-stage PPS: -The first stage: equidistance PPS was employed to draw the county sample. -The second stage: in each of the chosen county-level units, a sampling frame was created based on the data of townships/ward and size measurement; then the equidistance PPS is employed to choose the township/streets sample. -The third stage: a third sampling frame was obtained from each of the chosen township-level units (neighbourhoods, villages and size measurement), and, again, the equidistance PPS is employed to choose the village/neighbourhood sample. -The fourth stage: in each of the chosen village/neighbourhood units, the official list of households registration was obtained; using the size measurement of this unit and the desired number of households to count the sampling distance, then households were selected according to the sampling interval. Since the household registration also listed all family members of each of the household, respondents were drawn randomly immediately after the household drawing. The WVS-China sample was drawn out of the above described master sample.

Some readjustments: Primarily because of the budgetary constrains of the WVS project, six remote provinces in the master sample were excluded. They were: Hainan, Tibet, Gansu, Qinghai, Ningxia, and Sinkiang. These provinces are all with very low population density, and all together they count 5.1% of the total population and 4.6% of total households of the country. After the adjustments, seven of the 139 county-level units of the master sample were removed. Therefore, the target 40 PSUs were to be drawn out of the remaining 132 units.

Sampling Stages: -The first stage: 40 units were drawn from 132 county-level units of the master sample were removed. Therefore, the 40 PSUs were to be drawn out of the remaining 132 units. -The second stage: one unit was chosen randomly out of the 2 original township-level units (SSUs) in each of the 40 selected PSUs. -The third stage: one unit was chosen randomly out of the 2 original village-level units in each of the selected SSUs. -The fourth stage: from each of the chosen village-level units, 35 households were drawn out of the household registration list with equidistance, along with one respondent in each selected household.

Remarks about sampling: -Sample unit from office sampling: Housing

Mode of data collection

Face-to-face [f2f]

Research instrument

As a participating country-team of the World Values Survey (WVS), the Research Center of Contemporary China (RCCC) at Peking University implemented the WVS-China survey in 2001. The target population covers those who are between 18 and 65 of age (born between July 2, 1935 and July 1, 1982), formally registered and actually reside in dowelings within the households in China when the survey is conducted.

Response rate

The sample size was determined to be approximately 1,000 -- eligible individuals are to be drawn out of the above defined target population in China. Based on previous experience of response rate, it was decided to increase the target sample to 1,400 in order to reach a satisfied response rate. The final results are summarized as follows: - Target sample size: 1,400 - Sample drawn in the field: 1,385 - Completed, valid interviews: 1,000 - Response rate: 72.2% Summary of Non-Responses Types of Non-Responses (missing cases) % - Be away/not seen for several times: 145-37.7% - Be away for long time/be on a business trip/go abroad/travel:138-35.8% - The interviewer didnt write the reason: 23-6.0% - Rejection: 19-4.9% - Move/investigation reveals no this person: 15-3.9% - Impediments in body or language/at variance with qualification: 12-3.1% - Useless: 11-2.9% - Address is nor clear/cant find the address: 10-2.6% - A vacant house: 6-1.6% - Tenant: 6-1.6% - Total: 385-100%

Sampling error estimates

Estimated Error: 3,2

In 2023, the population of Guangdong province in China amounted to around 127.06 million inhabitants, ranking first among all the provinces in China. The population density in Guangdong is also higher than in many countries in the world.

Grey water footprint (GWF) efficiency is a reflection of both water pollution and the economy. The assessment of GWF and its efficiency is conducive to improving water environment quality and achieving sustainable development. This study introduces a comprehensive approach to assessing and analyzing the GWF efficiency. Based on the measurement of the GWF efficiency, the kernel density estimation and the Dagum Gini coefficient method are introduced to investigate the spatial and temporal variation of the GWF efficiency. The Geodetector method is also innovatively used to investigate the internal and external driving forces of GWF efficiency, not only revealing the effects of individual factors, but also probing the interaction between different drivers. For demonstrating this assessment approach, nine provinces in China’s Yellow River Basin from 2005 to 2020 are chosen for the study. The results show that: (1) the GWF efficiency of the basin increases from 23.92 yuan/m3 in 2005 to 164.87 yuan/m3 in 2020, showing a distribution pattern of "low in the western and high in the eastern". Agricultural GWF is the main contributor to the GWF. (2) The temporal variation of the GWF efficiency shows a rising trend, and the kernel density curve has noticeable left trailing and polarization characteristics. The spatial variation of the GWF efficiency fluctuates upwards, accompanied by a rise in the overall Gini coefficient from 0.25 to 0.28. Inter-regional variation of the GWF efficiency is the primary source of spatial variation, with an average contribution of 73.39%. (3) For internal driving forces, economic development is the main driver of the GWF efficiency, and the interaction of any two internal factors enhances the explanatory power. For external driving forces, capital stock reflects the greatest impact. The interaction combinations with the highest q statistics for upstream, midstream and downstream are capital stock and population density, technological innovation and population density, and industrial structure and population density, respectively.

In 2023, the district of the Beijing municipality with the highest resident population density was Xicheng district, with an average of 21,749 people living on one square kilometer. The average density of the population of the Beijing municipality in total was 1,332 people per square kilometer in 2023.

Level of high-quality development of animal husbandry industry in 30 provinces in China, 2010–2022.

Multiple regression coefficient and Pearson’s correlation coefficient of NTL density at provincial level in China.

As of the end of 2023, Inner Mongolia had the highest wind power capacity among all provinces in China. The province's wind farms had a combined output potential of over 50 gigawatts. With its flat and vast landscape and low population density, it is a very suitable location for wind energy generation.

The Yangtze River Delta urban agglomeration (YRDUA) is China’s most representative region with remarkable economic development vitality. The purpose of this study is to provide valuable data analysis to actively respond to the population aging in China. We mainly focus on the spatial and temporal evolution of population aging in YRDUA from 2000 to 2020 using city-level population data. This study constructs a multi-dimensional index system to measure population aging including population aging degree, speed, and density. It finds out: (1) the elderly population rate (EPR), the elder-child ratio (ECR), and the elderly dependency ratio (EDR) in the YRDUA area are gradually increasing from 2000 to 2020. In addition, the trends of these indicators in various cities and regions are relatively consistent. All 27 cities in YRDUA entered an aging society, from the primary to the moderate aging stage from 2000 to 2010 and from the moderate to the hyper aging stage from 2010 to 2020. (2) the absolute and relative growth rate of EPR is increasing from 2000 to 2020. However, the absolute and relative growth rate of ECR is increasing from 2000 to 2010 and then decreasing from 2010 to 2020. These results indicate that the two-child policy adopted by the Chinese government plays a positive role. (3) the density level of the elderly population in the YRDUA evolved from low in 2000 to middle in 2010 and then to high in 2020. (4) There are remarkable differences in the process of population aging among three provinces and one city. The contribution of this study is mainly reflected in two aspects: firstly, it constructs a multi-dimensional index system to measure population aging; secondly, using this multi-dimensional index system, it systematically observes the spatial and temporal evolution of population aging from 2000 to 2020 in the Yangtze River Delta Urban Agglomeration.

ObjectiveExploring the Incidence, Epidemic Trends, and Spatial Distribution Characteristics of Sporadic Hepatitis E in Hainan Province from 2013 to 2022 through four major tertiary hospitals in the Province.MethodsWe collected data on confirmed cases of hepatitis E in Hainan residents admitted to the four major tertiary hospitals in Haikou City from January 2013 to December 2022. We used SPSS software to analyze the correlation between incidence rate and economy, population density and geographical location, and origin software to draw a scatter chart and SAS 9.4 software to conduct a descriptive analysis of the time trend. The distribution was analyzed using ArcMap 10.8 software (spatial autocorrelation analysis, hotspot identification, concentration, and dispersion trend analysis). SAS software was used to build an autoregressive integrated moving average model (ARIMA) to predict the monthly number of cases in 2023 and 2024.ResultsFrom 2013 to 2022, 1,922 patients with sporadic hepatitis E were treated in the four hospitals of Hainan Province. The highest proportion of patients (n = 555, 28.88%) were aged 50–59 years. The annual incidence of hepatitis E increased from 2013 to 2019, with a slight decrease in 2020 and 2021 and an increase in 2022. The highest number of cases was reported in Haikou, followed by Dongfang and Danzhou. We found that there was a correlation between the economy, population density, latitude, and the number of cases, with the correlation coefficient |r| value fluctuating between 0.403 and 0.421, indicating a linear correlation. At the same time, a scatter plot shows the correlation between population density and incidence from 2013 to 2022, with r2 values fluctuating between 0.5405 and 0.7116, indicating a linear correlation. Global Moran’s I, calculated through spatial autocorrelation analysis, showed that each year from 2013 to 2022 all had a Moran’s I value >0, indicating positive spatial autocorrelation (p 

Currently, the core idea of the refined method of population spatial distribution is to establish a correlation between the population and auxiliary data at the administrative-unit level and, then, refine it to the grid unit. However, this method ignores the advantages of public population spatial distribution data. Given these problems, this study proposed a partition strategy using the natural break method at the grid-unit level, which adopts the population density to constrain the land class weight and redistributes the population under the dual constraints of land class and area weights. Accordingly, we used the dasymetric method to refine the population distribution data. The study established a partition model for public population spatial distribution data and auxiliary data at the grid-unit level and, then, refined it to smaller grid units. This method effectively utilizes the public population spatial distribution data and solves the problem of the dataset being not sufficiently accurate to describe small-scale regions and low resolutions. Taking the public WorldPop population spatial distribution dataset as an example, the results indicate that the proposed method has higher accuracy than other public datasets and can also describe the actual spatial distribution characteristics of the population accurately and intuitively. Simultaneously, this provides a new concept for research on population spatial distribution refinement methods.