Australia population density for 2022 was 3.38, a 1.28% increase from 2021.

<ul style='margin-top:20px;'>

<li>Australia population density for 2021 was <strong>3.34</strong>, a <strong>0.14% increase</strong> from 2020.</li>
<li>Australia population density for 2020 was <strong>3.33</strong>, a <strong>1.24% increase</strong> from 2019.</li>
<li>Australia population density for 2019 was <strong>3.29</strong>, a <strong>1.49% increase</strong> from 2018.</li>
</ul>Population density is midyear population divided by land area in square kilometers. Population is based on the de facto definition of population, which counts all residents regardless of legal status or citizenship--except for refugees not permanently settled in the country of asylum, who are generally considered part of the population of their country of origin. Land area is a country's total area, excluding area under inland water bodies, national claims to continental shelf, and exclusive economic zones. In most cases the definition of inland water bodies includes major rivers and lakes.

Australia Population Density: Inhabitants per sq km data was reported at 3.380 Person in 2022. This records an increase from the previous number of 3.340 Person for 2021. Australia Population Density: Inhabitants per sq km data is updated yearly, averaging 2.660 Person from Dec 1990 (Median) to 2022, with 33 observations. The data reached an all-time high of 3.380 Person in 2022 and a record low of 2.220 Person in 1990. Australia Population Density: Inhabitants per sq km data remains active status in CEIC and is reported by Organisation for Economic Co-operation and Development. The data is categorized under Global Database’s Australia – Table AU.OECD.GGI: Social: Demography: OECD Member: Annual.

This data set contains the Australian Bureau of Statistics population data for Australian states and territories. Population data was collected as part of national census’ in 1991, 1996, 2001, 2006 and 2011. Data presented is the total population for all collection districts by place of enumeration. District Boundaries differed for each census and therefore were re-projected onto the 2011 population mesh blocks to standardise the spatial extent of the reporting areas. Given the focus of this project, population data was clipped by a 50km coastal buffer.

Note: population data for census’ 1991 – 1996 - 2001 was purchased by NESP and is made publically available through by NESP

Note: population data for 2006 and 2011 was downloaded through the ABS webportal. http://www.abs.gov.au/websitedbs/censushome.nsf/home/tablebuilder?opendocument&navpos=240

Note. 2006 Census district boundaries were downloaded from the ABS website http://www.abs.gov.au/AUSSTATS/abs@.nsf/Lookup/2919.0.55.001Main+Features1Aug%202006?OpenDocument and 2011 population mesh blocks http://www.abs.gov.au/ausstats/abs@.nsf/mf/1270.0.55.001

This data contains geographical information in shape files that represent the population density in Australia, from 1991 to 2011. The data contains the summary polygon, state_code, cd_code19, 91_pop_dat (population count), area and density (in persons per km^2). For other data sets the count will be 96_pop_dat, 2001_pop_dat, 2006_pop_dat and 2011_pop_dat.

Population density (people per sq. km of land area) in Australia was reported at 3.382 sq. Km in 2022, according to the World Bank collection of development indicators, compiled from officially recognized sources. Australia - Population density (people per sq. km) - actual values, historical data, forecasts and projections were sourced from the World Bank on July of 2025.

Please note, we recommend using the new Map Viewer in ArcGIS Online. There is an issue in Map Viewer Classic with the display of grid cell values. The clickable area of each cell is shifted to the northwest. This can result in neighbouring pixel values being displayed. The underlying data is correct, and the values display correctly in the new Map Viewer and in ArcGIS Pro. The Australian population grid 2022 is a modelled 1 km x 1 km grid representation of the estimated resident population (ERP) of Australia from 30 June 2022. The population grid is created by reaggregating estimated resident population data from Statistical Areas Level 1 (SA1) to a 1 km x 1 km grid across Australia based on point data representing residential address points. The value of each grid cell represents the estimated population density (number of people per square kilometre) within each 1 km x 1 km grid cell.

SA1 boundaries are defined by the Australian Statistical Geography Standard (ASGS) Edition 3 (2021) and the 1 km x 1 km grid is based on the National Nested Grid.

Data considerations Caution must be taken when using the population grid as it presents modelled data only; it is not an exact measure of population across Australia. Contact the Australian Bureau of Statistics (ABS) If you have questions, feedback or would like to receive updates about this web service, please email geography@abs.gov.au. For information about how the ABS manages any personal information you provide view the ABS privacy policy.

Data and geography references Source data publication: Regional population, 2022 Additional data input: ABS Address Register Geographic boundary information: Australian Statistical Geography Standard (ASGS) Edition 3, National Nested Grid Further information: Regional population methodology Source: Australian Bureau of Statistics (ABS)

The Australian population grid 2024 was created using 2024 Estimated Resident Population (ERP) by Statistical Area Level 1 2021 (SA1) data. This data was modelled to 1 kilometre square grid cells to represent the population density of Australia (people per square kilometre). This is modelled data and should be used and interpreted with caution.SA1s are defined by the Australian Statistical Geography Standard (ASGS) Edition 3 2021. The grid was constructed using the National Nested Grid Standard.Processing steps:A subset of the ABS Address Register (AR) was created to represent residential addresses as closely as possible. Indigenous Community Points (ICP) were included where no AR point existed. SA1 centroid points were included where no AR or ICP point existed within an SA1. All these layers were combined into a single point layer (Allpoints).The Allpoints layer was overlaid with the SA1 boundaries to give every point an SA1 code. Points without an SA1 code (outside all SA1 regions) were dropped.ERP by SA1 was averaged across all points within each SA1. Points were converted to raster using the National Nested Grid as template. Point population values which fell within each raster cell were summed.Data and geography referencesMain source data publication: Regional population, 2023–24 financial yearGeographic boundary information: Australian Statistical Geography Standard (ASGS) Edition 3Further information: Regional population methodologySource: Australian Bureau of Statistics (ABS)Contact the Australian Bureau of StatisticsEmail geography@abs.gov.au if you have any questions or feedback about this web service.Subscribe to get updates on ABS web services and geospatial products.Privacy at the Australian Bureau of StatisticsRead how the ABS manages personal information - ABS privacy policy.

WorldPop produces different types of gridded population count datasets, depending on the methods used and end application. Please make sure you have read our Mapping Populations overview page before choosing and downloading a dataset.

Datasets are available to download in Geotiff and ASCII XYZ format at a resolution of 30 arc-seconds (approximately 1km at the equator)

-Unconstrained individual countries 2000-2020: Population density datasets for all countries of the World for each year 2000-2020 – derived from the corresponding Unconstrained individual countries 2000-2020 population count datasets by dividing the number of people in each pixel by the pixel surface area. These are produced using the unconstrained top-down modelling method.
-Unconstrained individual countries 2000-2020 UN adjusted: Population density datasets for all countries of the World for each year 2000-2020 – derived from the corresponding Unconstrained individual countries 2000-2020 population UN adjusted count datasets by dividing the number of people in each pixel, adjusted to match the country total from the official United Nations population estimates (UN 2019), by the pixel surface area. These are produced using the unconstrained top-down modelling method.

Data for earlier dates is available directly from WorldPop.

WorldPop (www.worldpop.org - School of Geography and Environmental Science, University of Southampton; Department of Geography and Geosciences, University of Louisville; Departement de Geographie, Universite de Namur) and Center for International Earth Science Information Network (CIESIN), Columbia University (2018). Global High Resolution Population Denominators Project - Funded by The Bill and Melinda Gates Foundation (OPP1134076). https://dx.doi.org/10.5258/SOTON/WP00674

Historical dataset showing Australia population density by year from 1961 to 2022.

The world's most accurate population datasets. Seven maps/datasets for the distribution of various populations in Australia: (1) Overall population density (2) Women (3) Men (4) Children (ages 0-5) (5) Youth (ages 15-24) (6) Elderly (ages 60+) (7) Women of reproductive age (ages 15-49).

The ABS Australian population grid 2023 was created using 2023 Estimated Residential Population (ERP) data at the SA1 level. The SA1 level ERP data was then modelled down to a 1km x 1km grid across geographic Australia using various point layers that represent population. The value of each grid cell represents the population density (number of people per square kilometre) in that 1km x 1km cell. This is modelled data and caution must be used in its interpretation, as the population has NOT been measured at the 1km cell level. SA1s are defined by the Australian Statistical Geography Standard (ASGS) Edition 3 (2021) and the grid used is based on the National Nested Grid Standard.Data and geography notes:Source data publication: Regional population, 2022-23Geographic boundary information: Statistical Areas Level 1 (SA1)(2021) - Australian Statistical Geography Standard (ASGS) Edition 3, National Nested Grid StandardAdditional data inputs: ABS Address Register, Indigenous Community Points (ICP)Further information: Regional population methodologySource: Australian Bureau of Statistics (ABS) www.abs.gov.auProcessing steps:A subset of the Address Register was created to represent residential addresses as closely as possible. Indigenous Community Points were included where no AR point existed. SA1 centroid points were included where no AR or ICP point existed within an SA1. All these layers were combined into a single point layer (Allpoints).The Allpoints layer was overlaid with the ASGS 2021 SA1 boundaries to give every point an SA1 code. Points without an SA1 code (outside all SA1 regions) were dropped.Estimated Resident Population by SA1 (ERP) was averaged across all points within each SA1.Points were converted to raster using the National Nested grid as template. Point population values falling within each raster cell were summed.

🇦🇺 호주 English This data set contains the Australian Bureau of Statistics population data for Australian states and territories. Population data was collected as part of national census’ in 1991, 1996, 2001, 2006 and 2011. Data presented is the total population for all collection districts by place of enumeration. District Boundaries differed for each census and therefore were re-projected onto the 2011 population mesh blocks to standardise the spatial extent of the reporting areas. Given the focus of this project, population data was clipped by a 50km coastal buffer. Note: population data for census’ 1991 – 1996 - 2001 was purchased by NESP and is made publically available through by NESP Note: population data for 2006 and 2011 was downloaded through the ABS webportal. http://www.abs.gov.au/websitedbs/censushome.nsf/home/tablebuilder?opendocument&navpos=240 Note. 2006 Census district boundaries were downloaded from the ABS website http://www.abs.gov.au/AUSSTATS/abs@.nsf/Lookup/2919.0.55.001Main+Features1Aug%202006?OpenDocument and 2011 population mesh blocks http://www.abs.gov.au/ausstats/abs@.nsf/mf/1270.0.55.001 This data contains geographical information in shape files that represent the population density in Australia, from 1991 to 2011. The data contains the summary polygon, state_code, cd_code19, 91_pop_dat (population count), area and density (in persons per km^2). For other data sets the count will be 96_pop_dat, 2001_pop_dat, 2006_pop_dat and 2011_pop_dat.

This data set included population and expenditure breakdowns by LGA,\r demographic statistics, labor statistics and Socio Economis Indexes for Areas\r (SEIFA) LGA score and ranking per LGA.\r \r Detailed descriptions of this data set include: \r \- LGA name \r \- LGA code \r \- Region \r \- Total Net Expenditure \r \- SEIFA DIS RANK State \r \- SEIFA DIS RANK Country \r \- SEIFA DIS RANK Metro \r \- SEIFA ADV DIS Score \r \- SEIFA ADV DIS RANK State \r \- SEIFA ADV DIS RANK Country \r \- SEIFA ADV DIS RANK Metro \r \- Adult population \r \- Adult population per venue \r \- EGM numbers per 1000 adults \r \- Expenditure per adult \r \- Workforce \r \- Unemployment \r \- Unemployment rate\r \r

In June 2022, it was estimated that around 7.3 percent of Australians were aged between 25 and 29, and the same applied to people aged between 30 and 34. All in all, about 55 percent of Australia’s population was aged 35 years or older as of June 2022. At the same time, the age distribution of the country also shows that the share of children under 14 years old was still higher than that of people over 65 years old. A breakdown of Australia’s population growth Australia is the sixth-largest country in the world, yet with a population of around 26 million inhabitants, it is only sparsely populated. Since the 1970s, the population growth of Australia has remained fairly constant. While there was a slight rise in the Australian death rate in 2022, the birth rate of the country decreased after a slight rise in the previous year. The fact that the birth rate is almost double the size of its death rate gives the country one of the highest natural population growth rates of any high-income country.
National distribution of the population Australia’s population is expected to surpass 28 million people by 2028. The majority of its inhabitants live in the major cities. The most populated states are New South Wales, Victoria, and Queensland. Together, they account for over 75 percent of the population in Australia.

The Census 2021 Usual Residents Population Density for SA2 data.sourced from: https://www.abs.gov.au/statistics/people/people-and-communities/socio-economic-indexes-areas-seifa-australia/latest-release

The population of the world, allocated to 1 arcsecond blocks. This refines CIESIN’s Gridded Population of the World project, using machine learning models on high-resolution worldwide Digital Globe satellite imagery.

Author: J Trygestad, educator, Minnesota Alliance for Geographic EducationGrade/Audience: grade 8Resource type: lessonSubject topic(s): population, migrationRegion: australia oceaniaStandards: Minnesota Social Studies Standards

Standard 5. The characteristics, distribution and migration of human populations on the earth’s surface influence human systems (cultural, economic and political systems).Objectives: Students will be able to:

1. Compare Australia’s population and culture with the U.S.’s population and culture.
2. Describe the population, population distribution, and population density of Australia.
3. Describe why people moved to Australia by naming push and pull factors.
4. Identify when and where immigrants settled in Australia.
5. Identify how Aborigines and immigrants were treated and the influence they have on Australia.Summary: This lesson is a series of activities and extensions detailing Australia’s population and culture characteristics. Also included are activities to learn about immigration and Aborigines. An Australia skit is a summative activity on Australian culture and history.

NEXIS (National Exposure Information System) Residential Population Density web service is a set of five raster layers, representing the density of people across Australia at different scales and resolution.

Census data reveals that population density varies noticeably from area to area. Small area census data do a better job depicting where the crowded neighborhoods are. In this map, the yellow areas of highest density range from 30,000 to 150,000 persons per square kilometer. In those areas, if the people were spread out evenly across the area, there would be just 4 to 9 meters between them. Very high density areas exceed 7,000 persons per square kilometer. High density areas exceed 5,200 persons per square kilometer. The last categories break at 3,330 persons per square kilometer, and 1,500 persons per square kilometer.This dataset is comprised of multiple sources. All of the demographic data are from Michael Bauer Research with the exception of the following countries:Australia: Esri Australia and MapData ServicesCanada: Esri Canada and EnvironicsFrance: Esri FranceGermany: Esri Germany and NexigaIndia: Esri India and IndicusJapan: Esri JapanSouth Korea: Esri Korea and OPENmateSpain: Esri España and AISUnited States: Esri Demographics

Since the 1960s, Australia's urbanization rate has consistently been above 80 percent, and in 2023 it has reached its highest ever rate at 86.62 percent. Historically, Australia has been one of the most urbanized countries in the world, due to high rates of immigration since the 20th century, which were generally to coastal, urban areas. However, despite its high urbanization rate, Australia is among the largest countries in the world; therefore its population density is among the lowest in the world.

This dataset presents data on population and people available from the ABS Data by Region statistics. This release of Data by Region presents various data for 2011-2019 and Census of Population and Housing data for 2011 and 2016 and is based on the Statistical Area 4 (SA4) 2016 boundaries. The dataset includes information in the following specified areas of population and people: Estimated Resident Population, Working Age Population, Median Age, Births and Deaths, Population Density, Internal and Overseas Migration, Aboriginal and Torres Strait Islander people, Overseas Born Proportion, Religious Affiliation and Speaks language other than English. Data by Region contains a standard set of data for each region type, depending on the availability of statistics for particular geographies. Data are sourced from a wide variety of collections, both ABS and non-ABS. When analysing these statistics, care needs to be taken as time periods, definitions, methodologies, scope and coverage can differ across collections. Where available, data have been presented as a time series - to enable users to assess changes over time. However, when looked at on a period to period basis, some series may sometimes appear volatile. When analysing the data, users are encouraged to consider the longer term behaviour of the series, where this extra information is available. For more information please visit the Explanatory Notes.