Monaco led the ranking for countries with the highest population density in 2024, with nearly 26,000 residents per square kilometer. The Special Administrative Region of Macao came in second, followed by Singapore. The world’s second smallest country Monaco is the world’s second-smallest country, with an area of about two square kilometers and a population of only around 40,000. It is a constitutional monarchy located by the Mediterranean Sea, and while Monaco is not part of the European Union, it does participate in some EU policies. The country is perhaps most famous for the Monte Carlo casino and for hosting the Monaco Grand Prix, the world's most prestigious Formula One race. The global population Globally, the population density per square kilometer is about 60 inhabitants, and Asia is the most densely populated region in the world. The global population is increasing rapidly, so population density is only expected to increase. In 1950, for example, the global population stood at about 2.54 billion people, and it reached over eight billion during 2023.

Ratio between the annual average population and the land area. The land area concept (excluding inland waters, such as lakes, wide rivers, estuaries) should be used wherever available; if not available, then the total area (including inland waters) is used.

Each year Eurostat collects demographic data at regional level from EU, EFTA and Candidate countries as part of the Population Statistics data collection. POPSTAT is Eurostat’s main annual demographic data collection and aims to gather information on demography and migration at national and regional levels by various breakdowns (for the full overview see the Eurostat dedicated section). More specifically, POPSTAT collects data at regional levels on:

• population stocks;
• vital events (live births and deaths).

Each country must send the statistics for the reference year (T) to Eurostat by 31 December of the following calendar year (T+1). Eurostat then publishes the data in March of the calendar year after that (T+2).

Demographic data at regional level include statistics on the population at the end of the calendar year and on live births and deaths during that year, according to the official classification for statistics at regional level (NUTS - nomenclature of territorial units for statistics) in force in the year. These data are broken down by NUTS 2 and 3 levels for EU countries. For more information on the NUTS classification and its versions please refer to the Eurostat dedicated pages. For EFTA and Candidate countries the data are collected according to the agreed statistical regions that have been coded in a way that resembles NUTS.

The breakdown of demographic data collected at regional level varies depending on the NUTS/statistical region level. These breakdowns are summarised below, along with the link to the corresponding online table:

NUTS 2 level

• Population by sex, age and region of residence — demo_r_d2jan
• Population on 1 January by age group, sex and region of residence — demo_r_pjangroup
• Live births by mother's age, mother's year of birth and mother's region of residence — demo_r_fagec
• Deaths by sex, age, and region of residence — demo_r_magec

NUTS 3 level

• Population on 1 January by sex, age group and region of residence — demo_r_pjangrp3
• Population on 1 January by broad age group, sex and region of residence — demo_r_pjanaggr3
• Live births (total) by region of residence — demo_r_births
• Live births by five-year age group of the mothers and region of residence — demo_r_fagec3
• Deaths (total) by region of residence — demo_r_deaths
• Deaths by five-year age group, sex and region of residence — demo_r_magec3

This more detailed breakdown (by five-year age group) of the data collected at NUTS 3 level started with the reference year 2013 and is in accordance with the European laws on demographic statistics. In addition to the regional codes set out in the NUTS classification in force, these online tables include few additional codes that are meant to cover data on persons and events that cannot be allocated to any official NUTS region. These codes are denoted as CCX/CCXX/CCXXX (Not regionalised/Unknown level 1/2/3; CC stands for country code) and are available only for France, Hungary, North Macedonia and Albania, reflecting the raw data as transmitted to Eurostat.

For the reference years from 1990 to 2012 all countries sent to Eurostat all the data on a voluntary basis, therefore the completeness of the tables and the length of time series reflect the level of data received from the responsible National Statistical Institutes’ (NSIs) data provider. As a general remark, a lower data breakdown is available at NUTS 3 level as detailed:

• population data are broken down by sex and broad age groups (0-14, 15-64 and 65 or more). The data have this disaggregation since the reference year 2007 for all countries, and even longer for some — demo_r_pjanaggr3
• vital events (live births and deaths) data are available only as totals, without any further breakdown — demo_r_births and demo_r_deaths

Demographic indicators are calculated by Eurostat based on the above raw data using a common methodology for all countries and regions. The regional demographic indicators computed by NUTS level and the corresponding online tables are summarised below:

NUTS 2 level

• Population structure indicators by region of residence (shares of various population age groups, dependency ratios and median age) — demo_r_pjanind2
• Fertility indicators by region of residence — demo_r_find2
• Fertility rates by age and region of residence — demo_r_frate2
• Life table by age, sex and region of residence — demo_r_mlife
• Life expectancy by age, sex and region of residence — demo_r_mlifexp
• Infant mortality rates by region of residence — demo_r_minfind

NUTS 3 level

• Population change - Demographic balance and crude rates at regional level — demo_r_gind3
• Population density by region — demo_r_d3dens
• Population structure indicators by region of residence (shares of various population age groups, dependency ratios and median age) — demo_r_pjanind3
• Fertility indicators by region of residence (total fertility rate, mean age of woman at childbirth and median age of woman at childbirth) — demo_r_find3

Notes:

1) All the indicators are computed for all lower NUTS regions included in the tables (e.g. data included in a table at NUTS 3 level will include also the data for NUTS 2, 1 and country levels).

2) Demographic indicators computed by NUTS 2 and 3 levels are calculated using input data that have different age breakdown. Therefore, minor differences can be noted between the values corresponding to the same indicator of the same region classified as NUTS 2, 1 or country level.

3) Since the reference year 2015, Eurostat has stopped collecting data on area; therefore, the table 'Area by NUTS 3 region (demo_r_d3area)' includes data up to the year 2015 included.

4) Starting with the reference year 2016, the population density indicator is computed using the new data on area 'Area by NUTS 3 region (reg_area3).

In 2022, the population density in the European Union remained nearly unchanged at around 112.02 inhabitants per square kilometer. Still, the population density reached its highest value in the observed period in 2022. Population density refers to the number of people living in a certain country or area, given as an average per square kilometer. It is calculated by dividing the total midyear population by the total land area.

The purpose of this data package is to offer essential population statistics about European countries covering static and dynamic demographical indicators. The two current sources of information are the International Institute for Applied Systems Analysis (IIASA), from Austria and the U.K. Office for National Statistics.

Historical dataset showing European Union population density by year from 1961 to 2022.

Between 2015 and 2022, Estonia had the highest density of “right to be forgotten” or “right to erasure” requests issued to Google and Microsoft Bing, among other European countries, with almost 59 appeals per 10 thousand inhabitants. Registering the highest number of requests during the analyzed period, France ranked second regarding request density, with 46.2 requests per 10 thousand inhabitants.

Population density - ENP-South countries

Population density on 1 January, ENP-East countries

This data set contains the population of Southern Europe.

Southern Europe countries include : Serbia Holy See Andorra Montenegro Italy Spain Malta Croatia San Marino Gibraltar Bosnia and Herzegovina Albania North Macedonia Slovenia Greece Portugal

Dataset details: Year: Year is from 1955 to 2020 Population: Count of Southern Europe country's population Yearly % Change: Percentage of yearly change in population Yearly Change: Count of yearly change in population Migrants (net): Number of Migrants per year Median Age: Median Age of the population Fertility Rate: Fertility Rate of the population Density: Population Density is in (P/Km²) Urban Pop%: percentage of Urban Population% Urban Pop: Count of Urban Population count Southern Europe's - Share of World Pop: Percentage of share of Southern Europe's the world population World Population: Count of the world population

Harmonized data file as the basis for comparative analysis of quality of life in the Candidate Countries and the European Union member states, based on seven different data sets, one Eurobarometer survey covering 13 Candidate Countries with an identical set of variables conducted in April 2002, the other six Standard Eurobarometer of different subjects and fielded in different years, each with another set of questions identical with the CC Eurobarometer. Selected aggregate indicators of quality of life ... describing the social situation in the EU15 and Candidate Countries. The countries are tentatively grouped according to affinities following a families of nations logic. The indicators were drawn from various sources, mainly provided by supranational organisations. They are grouped into six categories and recorded in the technical report (page 12 ff.): (1) economy and employment; (2) health; (3) population and family; (4) inequality and social problems; (5) modernisation; (6) political system. Most indicators refer to the year 2000. Deviations from this rule are explained in the list of indicators, together with definitions, coding, and sources. The indicators are added to the harmonized EB data file for all 28 countries in order to provide an opportunity for multi-level analysis. Selected comprehensive indicators and relevant indices have been defined and constructed for quality of life and subjective well-being as well as for poverty and deprivation measures. The CC-Eurobarometer contains several questions on the perceived income situation of a household and on the availability or lack of certain consumer goods. It also provides information on the perception of social integration and general acceptance. (Source: Alber, Jens; Böhnke, Petra; Delhey, Jan; Fliegner, Florian; Gauckler, Britta; Habich, Roland; Keck, Wolfgang; Kohler, Ulrich Kohler; Nauenburg, Ricarda; Schiller, Sabine: Quality of Life in the European Union and the Candidate Countries. Technical Report. Results of data inspection, establishing a harmonized data file, recoding procedure and preparation of analysis. Hand-out for the first researchers’ meeting, Brussels, 4-5 March 2003.) Persönliches Interview Face-to-face interview Population of any nationality of an European Union member, aged 15 years and over, resident in any of the Member States, respectively citizens of each Candidate Country, aged 15 and over. Multi-stage, random (probability) sampling. The sampling is based on a random selection of sampling points after stratification by the distribution of the national, resident population in terms of metropolitan, urban and rural areas, i.e. proportional to the population size (for a total coverage of the country) und to the population density. These primary sampling units (PSU) are selected from each of the administrative regions in every country. In the second stage, a cluster of addresses is selected from each sampled PSU. Addresses are chosen systematically using standard random route procedures, beginning with an initial address selected at random. In each household, one respondent is selected by a random procedure, such as the first birthday method.

As of 2025, Asia was the most densely populated region of the world, with nearly 156 inhabitants per square kilometer, whereas Oceania's population density was just over five inhabitants per square kilometer.

Abstract Mortality statistics due to COVID-19 worldwide are compared, by adjusting for the size of the population and the stage of the pandemic. Data from the European Centre for Disease Control and Prevention, and Our World in Data websites were used. Analyses are based on number of deaths per one million inhabitants. In order to account for the stage of the pandemic, the baseline date was defined as the day in which the 10th death was reported. The analyses included 78 countries and territories which reported 10 or more deaths by April 9. On day 10, India had 0.06 deaths per million, Belgium had 30.46 and San Marino 618.78. On day 20, India had 0.27 deaths per million, China had 0.71 and Spain 139.62. On day 30, four Asian countries had the lowest mortality figures, whereas eight European countries had the highest ones. In Italy and Spain, mortality on day 40 was greater than 250 per million, whereas in China and South Korea, mortality was below 4 per million. Mortality on day 10 was moderately correlated with life expectancy, but not with population density. Asian countries presented much lower mortality figures as compared to European ones. Life expectancy was found to be correlated with mortality.

Each year Eurostat collects demographic data at regional level from EU, EFTA and Candidate countries as part of the Population Statistics data collection. POPSTAT is Eurostat’s main annual demographic data collection and aims to gather information on demography and migration at national and regional levels by various breakdowns (for the full overview see the Eurostat dedicated section). More specifically, POPSTAT collects data at regional levels on:

• population stocks;
• vital events (live births and deaths).

Each country must send the statistics for the reference year (T) to Eurostat by 31 December of the following calendar year (T+1). Eurostat then publishes the data in March of the calendar year after that (T+2).

Demographic data at regional level include statistics on the population at the end of the calendar year and on live births and deaths during that year, according to the official classification for statistics at regional level (NUTS - nomenclature of territorial units for statistics) in force in the year. These data are broken down by NUTS 2 and 3 levels for EU countries. For more information on the NUTS classification and its versions please refer to the Eurostat dedicated pages. For EFTA and Candidate countries the data are collected according to the agreed statistical regions that have been coded in a way that resembles NUTS.

The breakdown of demographic data collected at regional level varies depending on the NUTS/statistical region level. These breakdowns are summarised below, along with the link to the corresponding online table:

NUTS 2 level

• Population by sex, age and region of residence — demo_r_d2jan
• Population on 1 January by age group, sex and region of residence — demo_r_pjangroup
• Live births by mother's age, mother's year of birth and mother's region of residence — demo_r_fagec
• Deaths by sex, age, and region of residence — demo_r_magec

NUTS 3 level

• Population on 1 January by sex, age group and region of residence — demo_r_pjangrp3
• Population on 1 January by broad age group, sex and region of residence — demo_r_pjanaggr3
• Live births (total) by region of residence — demo_r_births
• Live births by five-year age group of the mothers and region of residence — demo_r_fagec3
• Deaths (total) by region of residence — demo_r_deaths
• Deaths by five-year age group, sex and region of residence — demo_r_magec3

This more detailed breakdown (by five-year age group) of the data collected at NUTS 3 level started with the reference year 2013 and is in accordance with the European laws on demographic statistics. In addition to the regional codes set out in the NUTS classification in force, these online tables include few additional codes that are meant to cover data on persons and events that cannot be allocated to any official NUTS region. These codes are denoted as CCX/CCXX/CCXXX (Not regionalised/Unknown level 1/2/3; CC stands for country code) and are available only for France, Hungary, North Macedonia and Albania, reflecting the raw data as transmitted to Eurostat.

For the reference years from 1990 to 2012 all countries sent to Eurostat all the data on a voluntary basis, therefore the completeness of the tables and the length of time series reflect the level of data received from the responsible National Statistical Institutes’ (NSIs) data provider. As a general remark, a lower data breakdown is available at NUTS 3 level as detailed:

• population data are broken down by sex and broad age groups (0-14, 15-64 and 65 or more). The data have this disaggregation since the reference year 2007 for all countries, and even longer for some — demo_r_pjanaggr3
• vital events (live births and deaths) data are available only as totals, without any further breakdown — demo_r_births and demo_r_deaths

Demographic indicators are calculated by Eurostat based on the above raw data using a common methodology for all countries and regions. The regional demographic indicators computed by NUTS level and the corresponding online tables are summarised below:

NUTS 2 level

• Population structure indicators by region of residence (shares of various population age groups, dependency ratios and median age) — demo_r_pjanind2
• Fertility indicators by region of residence — demo_r_find2
• Fertility rates by age and region of residence — demo_r_frate2
• Life table by age, sex and region of residence — demo_r_mlife
• Life expectancy by age, sex and region of residence — demo_r_mlifexp
• Infant mortality rates by region of residence — demo_r_minfind

NUTS 3 level

• Population change - Demographic balance and crude rates at regional level — demo_r_gind3
• Population density by region — demo_r_d3dens
• Population structure indicators by region of residence (shares of various population age groups, dependency ratios and median age) — demo_r_pjanind3
• Fertility indicators by region of residence (total fertility rate, mean age of woman at childbirth and median age of woman at childbirth) — demo_r_find3

Notes:

1) All the indicators are computed for all lower NUTS regions included in the tables (e.g. data included in a table at NUTS 3 level will include also the data for NUTS 2, 1 and country levels).

2) Demographic indicators computed by NUTS 2 and 3 levels are calculated using input data that have different age breakdown. Therefore, minor differences can be noted between the values corresponding to the same indicator of the same region classified as NUTS 2, 1 or country level.

3) Since the reference year 2015, Eurostat has stopped collecting data on area; therefore, the table 'Area by NUTS 3 region (demo_r_d3area)' includes data up to the year 2015 included.

4) Starting with the reference year 2016, the population density indicator is computed using the new data on area 'Area by NUTS 3 region (reg_area3).

The European Copernicus Coastal Flood Awareness System (ECFAS) project will contribute to the evolution of the Copernicus Emergency Monitoring Service by demonstrating the technical and operational feasibility of a European Coastal Flood Awareness System. Specifically, ECFAS will provide a much-needed solution to bolster coastal resilience to climate risk and reduce population and infrastructure exposure by monitoring and supporting disaster preparedness, two factors that are fundamental to damage prevention and recovery if a storm hits.

The ECFAS Proof-of-Concept development will run from January 2021-December 2022. The ECFAS project is a collaboration between Istituto Universitario di Studi Superiori IUSS di Pavia (Italy, ECFAS Coordinator), Mercator Ocean International (France), Planetek Hellas (Greece), Collecte Localisation Satellites (France), Consorzio Futuro in Ricerca (Italy), Universitat Politecnica de Valencia (Spain), University of the Aegean (Greece), and EurOcean (Portugal), and is funded by the European Commission H2020 Framework Programme within the call LC-SPACE-18-EO-2020 - Copernicus evolution: research activities in support of the evolution of the Copernicus services.

This project has received funding from the European Union’s Horizon 2020 programme

Description of the containing files inside the Dataset.

The dataset was divided at European country level, except the Adriatic area which was extracted as a region and not on a country level due to the small size of the countries. The buffer zone of each data was 10km inland in order to be correlated with the new Copernicus product Coastal Zone LU/LC.

Specifically, the dataset includes the new Coastal LU/LC product which was implemented by the EEA and became available at the end of 2020. Additional information collected in relation to the location and characteristics of transport (road and railway) and utility networks (power plants), population density and time variability. Furthermore, some of the publicly available datasets that were used in CEMS related to the abovementioned assets were gathered such as OpenStreetMap (building footprints, road and railway network infrastructures), GeoNames (populated places but also names of administrative units, rivers and lakes, forests, hills and mountains, parks and recreational areas, etc.), the Global Human Settlement Layer (GHS) and Global Human Settlement Population Grid (GHS-POP) generated by JRC. Below there are tables which present the dataset. Finally, the dataset contains statistics information regarding the population of Europe per sex and age divided in administrative units NUTS level 3.

Copernicus Land Monitoring Service	Resolution	Comment
Coastal LU/LC	1:10.000	A Copernicus hotspot product to monitor landscape dynamics in coastal zones
EU-Hydro - Coastline	1:30.000	EU-Hydro is a dataset for all European countries providing the coastline
Natura 2000	1: 100000	A Copernicus hotspot product to monitor important areas for nature conservation
European Settlement Map	10m	A spatial raster dataset that is mapping human settlements in Europe
Imperviousness Density	10m	The percentage of sealed area
Impervious Built-up	10m	The part of the sealed surfaces where buildings can be found
Grassland 2018	10m	A binary grassland/non-grassland product
Tree Cover Density 2018	10m	Level of tree cover density in a range from 0-100%

Joint Research Center	Resolution	Comment
Global Human Settlement Population Grid GHS-POP)	250m	Residential population estimates for target year 2015
GHS settlement model layer (GHS-SMOD)	1km	The GHS Settlement Model grid delineates and classify settlement typologies via a logic of population size, population and built-up area densities
GHS-BUILT	10m	Built-up grid derived from Sentinel-2 global image composite for reference year 2018
ENACT 2011 Population Grid (ENACT-POP R2020A)	1km	The ENACT is a population density for the European Union that take into account major daily and monthly population variations
JRC Open Power Plants Database (JRC-PPDB-OPEN)	-	Europe’s open power plant database
GHS functional urban areas (GHS-FUA R2019A)	1km	City and its commuting zone (area of influence of the city in terms of labour market flows)
GHS Urban Centre Database (GHS-UCDB R2019A)	1km	Urban Centres defined by specific cut-off values on resident population and built-up surface

Additional Data	Resolution	Comment
Open Street Map (OSM)	-	BF, Transportation Network, Utilities Network, Places of Interest
CEMS	-	Data from Rapid Mapping activations in Europe
GeoNames	-	Populated places, Adm. units, Hydrography, Forests, Hills/Mountains, Parks, etc.
Global Administrative Areas	-	Administrative areas of all countries, at all levels of sub-division
NUTS3 Population Age/Sex Group	-	Eurostat population by age and sex statistics intersected with the NUTS3 Units

Disclaimer:

ECFAS partners provide the data "as is" and "as available" without warranty of any kind. The ECFAS partners shall not be held liable resulting from the use of the information and data provided.

This project has received funding from the Horizon 2020 research and innovation programme under grant agreement No. 101004211

Each year Eurostat collects demographic data at regional level from EU, EFTA and Candidate countries as part of the Population Statistics data collection. POPSTAT is Eurostat’s main annual demographic data collection and aims to gather information on demography and migration at national and regional levels by various breakdowns (for the full overview see the Eurostat dedicated section). More specifically, POPSTAT collects data at regional levels on:

• population stocks;
• vital events (live births and deaths).

Each country must send the statistics for the reference year (T) to Eurostat by 31 December of the following calendar year (T+1). Eurostat then publishes the data in March of the calendar year after that (T+2).

Demographic data at regional level include statistics on the population at the end of the calendar year and on live births and deaths during that year, according to the official classification for statistics at regional level (NUTS - nomenclature of territorial units for statistics) in force in the year. These data are broken down by NUTS 2 and 3 levels for EU countries. For more information on the NUTS classification and its versions please refer to the Eurostat dedicated pages. For EFTA and Candidate countries the data are collected according to the agreed statistical regions that have been coded in a way that resembles NUTS.

The breakdown of demographic data collected at regional level varies depending on the NUTS/statistical region level. These breakdowns are summarised below, along with the link to the corresponding online table:

NUTS 2 level

• Population by sex, age and region of residence — demo_r_d2jan
• Population on 1 January by age group, sex and region of residence — demo_r_pjangroup
• Live births by mother's age, mother's year of birth and mother's region of residence — demo_r_fagec
• Deaths by sex, age, and region of residence — demo_r_magec

NUTS 3 level

• Population on 1 January by sex, age group and region of residence — demo_r_pjangrp3
• Population on 1 January by broad age group, sex and region of residence — demo_r_pjanaggr3
• Live births (total) by region of residence — demo_r_births
• Live births by five-year age group of the mothers and region of residence — demo_r_fagec3
• Deaths (total) by region of residence — demo_r_deaths
• Deaths by five-year age group, sex and region of residence — demo_r_magec3

This more detailed breakdown (by five-year age group) of the data collected at NUTS 3 level started with the reference year 2013 and is in accordance with the European laws on demographic statistics. In addition to the regional codes set out in the NUTS classification in force, these online tables include few additional codes that are meant to cover data on persons and events that cannot be allocated to any official NUTS region. These codes are denoted as CCX/CCXX/CCXXX (Not regionalised/Unknown level 1/2/3; CC stands for country code) and are available only for France, Hungary, North Macedonia and Albania, reflecting the raw data as transmitted to Eurostat.

For the reference years from 1990 to 2012 all countries sent to Eurostat all the data on a voluntary basis, therefore the completeness of the tables and the length of time series reflect the level of data received from the responsible National Statistical Institutes’ (NSIs) data provider. As a general remark, a lower data breakdown is available at NUTS 3 level as detailed:

• population data are broken down by sex and broad age groups (0-14, 15-64 and 65 or more). The data have this disaggregation since the reference year 2007 for all countries, and even longer for some — demo_r_pjanaggr3
• vital events (live births and deaths) data are available only as totals, without any further breakdown — demo_r_births and demo_r_deaths

Demographic indicators are calculated by Eurostat based on the above raw data using a common methodology for all countries and regions. The regional demographic indicators computed by NUTS level and the corresponding online tables are summarised below:

NUTS 2 level

• Population structure indicators by region of residence (shares of various population age groups, dependency ratios and median age) — demo_r_pjanind2
• Fertility indicators by region of residence — demo_r_find2
• Fertility rates by age and region of residence — demo_r_frate2
• Life table by age, sex and region of residence — demo_r_mlife
• Life expectancy by age, sex and region of residence — demo_r_mlifexp
• Infant mortality rates by region of residence — demo_r_minfind

NUTS 3 level

• Population change - Demographic balance and crude rates at regional level — demo_r_gind3
• Population density by region — demo_r_d3dens
• Population structure indicators by region of residence (shares of various population age groups, dependency ratios and median age) — demo_r_pjanind3
• Fertility indicators by region of residence (total fertility rate, mean age of woman at childbirth and median age of woman at childbirth) — demo_r_find3

Notes:

1) All the indicators are computed for all lower NUTS regions included in the tables (e.g. data included in a table at NUTS 3 level will include also the data for NUTS 2, 1 and country levels).

2) Demographic indicators computed by NUTS 2 and 3 levels are calculated using input data that have different age breakdown. Therefore, minor differences can be noted between the values corresponding to the same indicator of the same region classified as NUTS 2, 1 or country level.

3) Since the reference year 2015, Eurostat has stopped collecting data on area; therefore, the table 'Area by NUTS 3 region (demo_r_d3area)' includes data up to the year 2015 included.

4) Starting with the reference year 2016, the population density indicator is computed using the new data on area 'Area by NUTS 3 region (reg_area3).

In 2019, Latvia had the highest rail network density in Europe, with around **** kilometers of tracks per 10,000 inhabitants. It was followed closely by Estonia and Finland, at ***** and ***** kilometers per 10,000 inhabitants respectively.

The data used for analysis are provided in the Excel files, in which cells contain formulae for carrying out basic computations. Graphics in the paper are also presented in the Excel files, which point to the source data in each file. Click "don't update" when opening Excel files. Although the SEIR and skew-logistic models cna be run from the Excel files provided, readers can also construct these models from the information given in the Supplementary Materials (included with the manuscript).

Contains covariate data for "The association between alcohol consumption per capita and suicide mortality across 30 European countries" which were extracted from the Pew Research Center (pewresearch.org), World Bank Group (worldbank.org), and Eurostat (ec.europa.eu/eurostat). Also contains dummy variables to represent: the 2008 global economic recession, changes from ICD-9 to ICD-10, and the COVID-19 pandemic. All covariates which were initially considered are included in this dataset. However, data were further cleaned according to methods described in the associated publication prior to analysis. Within the dataset: edu = Educational attainment (completion of post-secondary or equivalent) lit = Literacy, adult total (% of people ages 15 and above) unemp = Unemployment, total (% of total labor force) (modeled ILO estimate) divorce = Divorce rate migration = Net migration rate relig.muslim = Proportion of the population who identified as Muslim relig.buddhist = Proportion of the population who identified as Buddhist lff = Female labour force participation (% of total labor force) gdp = Gross domestic product based on purchasing power parity (GDP (PPP)) gini = Gini index density = Population density urban = Proportion of the population living in urban areas recession, covid, icd: Dummy variables detailed above.

The population density in France was 124.3 people per square kilometer in 2022. This number has been slowly increasing for the past ten years. Higher population density is associated with urbanization, but not necessarily economic growth. Comparative densities France’s population density is higher than the European average. It is higher than any region except Asia, as well as the total world population density. This is likely due to the number of large cities in France. The country has one of the largest urban populations in the world. This shapes the French economic and social landscapes; the cities become more expensive, but they also bring more economic opportunities. These opportunities attract people both from the French countryside and other countries who hope to benefit from such jobs. A tale of two countries For those who can afford it, Paris can be a cosmopolitan paradise. However, with the average price of a rental apartment twice that of most other French cities, few can afford to live in the richest parts of the city. This stark difference in costs implies that average annual wages should have a similar difference between cities. While this is not a perfectly even cause and effect, it gives some explanation for the increasing population density of France.