The following estimates have been superseded by our revised mid-2002 to mid-2010 population estimates for the UK released on 17th December 2013

A look-up table with formatting for population-density categoriesUsed here:https://github.com/michaeldgarber/global-ndvi-pop/blob/main/scripts/figures-main-text.Rhttps://github.com/michaeldgarber/global-ndvi-pop/blob/main/scripts/figures-main-text.R

Monaco led the ranking for countries with the highest population density in 2024, with nearly 26,000 residents per square kilometer. The Special Administrative Region of Macao came in second, followed by Singapore. The world’s second smallest country Monaco is the world’s second-smallest country, with an area of about two square kilometers and a population of only around 40,000. It is a constitutional monarchy located by the Mediterranean Sea, and while Monaco is not part of the European Union, it does participate in some EU policies. The country is perhaps most famous for the Monte Carlo casino and for hosting the Monaco Grand Prix, the world's most prestigious Formula One race. The global population Globally, the population density per square kilometer is about 60 inhabitants, and Asia is the most densely populated region in the world. The global population is increasing rapidly, so population density is only expected to increase. In 1950, for example, the global population stood at about 2.54 billion people, and it reached over eight billion during 2023.

This map shows population density of the United States. Areas in darker magenta have much higher population per square mile than areas in orange or yellow. Data is from the U.S. Census Bureau’s 2020 Census Demographic and Housing Characteristics. The map's layers contain total population counts by sex, age, and race groups for Nation, State, County, Census Tract, and Block Group in the United States and Puerto Rico. From the Census:"Population density allows for broad comparison of settlement intensity across geographic areas. In the U.S., population density is typically expressed as the number of people per square mile of land area. The U.S. value is calculated by dividing the total U.S. population (316 million in 2013) by the total U.S. land area (3.5 million square miles).When comparing population density values for different geographic areas, then, it is helpful to keep in mind that the values are most useful for small areas, such as neighborhoods. For larger areas (especially at the state or country scale), overall population density values are less likely to provide a meaningful measure of the density levels at which people actually live, but can be useful for comparing settlement intensity across geographies of similar scale." SourceAbout the dataYou can use this map as is and you can also modify it to use other attributes included in its layers. This map's layers contain total population counts by sex, age, and race groups data from the 2020 Census Demographic and Housing Characteristics. This is shown by Nation, State, County, Census Tract, Block Group boundaries. Each geography layer contains a common set of Census counts based on available attributes from the U.S. Census Bureau. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.Vintage of boundaries and attributes: 2020 Demographic and Housing Characteristics Table(s): P1, H1, H3, P2, P3, P5, P12, P13, P17, PCT12 (Not all lines of these DHC tables are available in this feature layer.)Data downloaded from: U.S. Census Bureau’s data.census.gov siteDate the Data was Downloaded: May 25, 2023Geography Levels included: Nation, State, County, Census Tract, Block GroupNational Figures: included in Nation layer The United States Census Bureau Demographic and Housing Characteristics: 2020 Census Results 2020 Census Data Quality Geography & 2020 Census Technical Documentation Data Table Guide: includes the final list of tables, lowest level of geography by table and table shells for the Demographic Profile and Demographic and Housing Characteristics.News & Updates This map is ready to be used in ArcGIS Pro, ArcGIS Online and its configurable apps, Story Maps, dashboards, Notebooks, Python, custom apps, and mobile apps. Data can also be exported for offline workflows. Please cite the U.S. Census Bureau when using this data. Data Processing Notes: These 2020 Census boundaries come from the US Census TIGER geodatabases. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For Census tracts and block groups, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract and block group boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2020 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are unchanged and available as attributes within the data table (units are square meters).  The layer contains all US states, Washington D.C., and Puerto Rico. Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Block groups that fall within the same criteria (Block Group denoted as 0 with no area land) have also been removed.Percentages and derived counts, are calculated values (that can be identified by the "_calc_" stub in the field name). Field alias names were created based on the Table Shells file available from the Data Table Guide for the Demographic Profile and Demographic and Housing Characteristics. Not all lines of all tables listed above are included in this layer. Duplicative counts were dropped. For example, P0030001 was dropped, as it is duplicative of P0010001.To protect the privacy and confidentiality of respondents, their data has been protected using differential privacy techniques by the U.S. Census Bureau.

Population density (people per sq. km of land area) in World was reported at 61.59 sq. Km in 2022, according to the World Bank collection of development indicators, compiled from officially recognized sources. World - Population density (people per sq. km) - actual values, historical data, forecasts and projections were sourced from the World Bank on June of 2025.

In 2023, Washington, D.C. had the highest population density in the United States, with 11,130.69 people per square mile. As a whole, there were about 94.83 residents per square mile in the U.S., and Alaska was the state with the lowest population density, with 1.29 residents per square mile. The problem of population density Simply put, population density is the population of a country divided by the area of the country. While this can be an interesting measure of how many people live in a country and how large the country is, it does not account for the degree of urbanization, or the share of people who live in urban centers. For example, Russia is the largest country in the world and has a comparatively low population, so its population density is very low. However, much of the country is uninhabited, so cities in Russia are much more densely populated than the rest of the country. Urbanization in the United States While the United States is not very densely populated compared to other countries, its population density has increased significantly over the past few decades. The degree of urbanization has also increased, and well over half of the population lives in urban centers.

This table contains 26 series, with data for years 1851 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Unit of measure (1 items: Persons ...) Geography (13 items: Canada; Newfoundland and Labrador; Nova Scotia; Prince Edward Island ...) Estimates (2 items: Population; Population density per square mile ...).

Iran: Population density, people per square km: The latest value from 2021 is 54 people per square km, unchanged from 54 people per square km in 2020. In comparison, the world average is 456 people per square km, based on data from 196 countries. Historically, the average for Iran from 1961 to 2021 is 33 people per square km. The minimum value, 13 people per square km, was reached in 1961 while the maximum of 54 people per square km was recorded in 2020.

This table contains 173 series, with data for years 1996 - 1996 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (173 items: Canada; Newfoundland and Labrador; Health and Community Services St. John's Region, Newfoundland and Labrador; Health and Community Services Eastern Region, Newfoundland and Labrador; ...).

Guinea: Population density, people per square km: The latest value from 2021 is 55 people per square km, an increase from 54 people per square km in 2020. In comparison, the world average is 456 people per square km, based on data from 196 countries. Historically, the average for Guinea from 1961 to 2021 is 29 people per square km. The minimum value, 15 people per square km, was reached in 1961 while the maximum of 55 people per square km was recorded in 2021.

Japan: Population density, people per square km: The latest value from 2021 is 345 people per square km, a decline from 346 people per square km in 2020. In comparison, the world average is 456 people per square km, based on data from 196 countries. Historically, the average for Japan from 1961 to 2021 is 325 people per square km. The minimum value, 256 people per square km, was reached in 1961 while the maximum of 351 people per square km was recorded in 2004.

Population density (people per sq. km of land area) in Guyana was reported at 4.1739 sq. Km in 2022, according to the World Bank collection of development indicators, compiled from officially recognized sources. Guyana - Population density (people per sq. km) - actual values, historical data, forecasts and projections were sourced from the World Bank on July of 2025.

Population density (people per sq. km of land area) in Mexico was reported at 66.16 sq. Km in 2022, according to the World Bank collection of development indicators, compiled from officially recognized sources. Mexico - Population density (people per sq. km) - actual values, historical data, forecasts and projections were sourced from the World Bank on July of 2025.

Ghana: Population density, people per square km: The latest value from 2021 is 144 people per square km, an increase from 141 people per square km in 2020. In comparison, the world average is 456 people per square km, based on data from 196 countries. Historically, the average for Ghana from 1961 to 2021 is 76 people per square km. The minimum value, 31 people per square km, was reached in 1961 while the maximum of 144 people per square km was recorded in 2021.

Hong Kong Population - Table 110-02001 : Land area, mid-year population and population density by District Council district

Population density (people per sq. km of land area) in San Marino was reported at 563 sq. Km in 2022, according to the World Bank collection of development indicators, compiled from officially recognized sources. San Marino - Population density (people per sq. km) - actual values, historical data, forecasts and projections were sourced from the World Bank on July of 2025.

Vietnam Population Density: RR: Ha Noi data was reported at 2,555.800 Person/sq km in 2023. This records an increase from the previous number of 2,511.000 Person/sq km for 2022. Vietnam Population Density: RR: Ha Noi data is updated yearly, averaging 2,305.200 Person/sq km from Dec 2011 (Median) to 2023, with 13 observations. The data reached an all-time high of 2,555.800 Person/sq km in 2023 and a record low of 2,050.500 Person/sq km in 2011. Vietnam Population Density: RR: Ha Noi data remains active status in CEIC and is reported by General Statistics Office. The data is categorized under Global Database’s Vietnam – Table VN.G003: Population Density: By Provinces.

Vietnam Population Density: South East (SE) data was reported at 807.500 Person/sq km in 2023. This records an increase from the previous number of 799.000 Person/sq km for 2022. Vietnam Population Density: South East (SE) data is updated yearly, averaging 727.400 Person/sq km from Dec 2011 (Median) to 2023, with 13 observations. The data reached an all-time high of 807.500 Person/sq km in 2023 and a record low of 635.900 Person/sq km in 2011. Vietnam Population Density: South East (SE) data remains active status in CEIC and is reported by General Statistics Office. The data is categorized under Global Database’s Vietnam – Table VN.G003: Population Density: By Provinces.

Table contains total population and population density summarized at county, city, zip code, and census tract level. Population density is defined as number of people residing per square mile of area. Data are presented for zip codes (ZCTAs) fully within the county. Source: U.S. Census Bureau, 2016-2020 American Community Survey 5-year estimates, Table B01001; data accessed on April 11, 2022 from https://api.census.gov. The 2020 Decennial geographies are used for data summarization.METADATA:notes (String): Lists table title, notes, sourcesgeolevel (String): Level of geographyGEOID (String): Geography IDNAME (String): Name of geographyt_pop (Numeric): Total populationpop_density (Numeric): Area in square milesarea (Numeric): Population density

Key figures on the population of the Netherlands. The following information is available: - Population by sex; - Population by marital status; - Population by age (groups); - Population by origin; - Private households; - Persons in institutional households; - Population growth; - Population density. Statistics Netherlands will reorganise the tables relating to statistics on population and households. The aim is to reduce the number of tables while striving to preserve (much) needed information. This table will be revised as soon as possible. CBS is in transition towards a new classification of the population by origin. Greater emphasis is now placed on where a person was born, aside from where that person’s parents were born. The term ‘migration background’ is no longer used in this regard. The main categories western/non-western are being replaced by categories based on continents and a few countries that share a specific migration history with the Netherlands. The new classification is being implemented gradually in tables and publications on population by origin. Data available from 1950 to 2022. Status of the figures: All the figures are final. Changes as of 26 April 2023: None, this table was discontinued. When will new figures be published? No longer applicable. This table is succeeded by the table Population; key figures. See section 3.