Mogadishu in Somalia led the ranking of cities with the highest population density in 2023, with ****** residents per square kilometer. When it comes to countries, Monaco is the most densely populated state worldwide.

All cities with a population > 1000 or seats of adm div (ca 80.000)Sources and ContributionsSources : GeoNames is aggregating over hundred different data sources. Ambassadors : GeoNames Ambassadors help in many countries. Wiki : A wiki allows to view the data and quickly fix error and add missing places. Donations and Sponsoring : Costs for running GeoNames are covered by donations and sponsoring.Enrichment:add country name

Mexico City ranked as the most densely populated city in Mexico as of 2023. The capital recorded 8,657 inhabitants per square kilometer. Xalapa and Acapulco followed with 7,150 and 5,750 inhabitants per square kilometer, respectively.

Monaco led the ranking for countries with the highest population density in 2024, with nearly 26,000 residents per square kilometer. The Special Administrative Region of Macao came in second, followed by Singapore. The world’s second smallest country Monaco is the world’s second-smallest country, with an area of about two square kilometers and a population of only around 40,000. It is a constitutional monarchy located by the Mediterranean Sea, and while Monaco is not part of the European Union, it does participate in some EU policies. The country is perhaps most famous for the Monte Carlo casino and for hosting the Monaco Grand Prix, the world's most prestigious Formula One race. The global population Globally, the population density per square kilometer is about 60 inhabitants, and Asia is the most densely populated region in the world. The global population is increasing rapidly, so population density is only expected to increase. In 1950, for example, the global population stood at about 2.54 billion people, and it reached over eight billion during 2023.

As of 2023, the top five most densely populated cities in Latin America and the Caribbean were in Colombia. The capital, Bogotá, ranked first with over 18,241 inhabitants per square kilometer.

Population of Urban Agglomerations with 300,000 Inhabitants or more in 2014, by city, 1950-2030 (thousands). Data for 1,692 cities contained in the Excel file.

Note: Each country has its own definition of what is 'urban' and therefore use exercise caution when comparing cities in different countries.

Data available from the United Nations, Department of Economic and Social Affairs, Population Division (2014). World Urbanization Prospects: The 2014 Revision, CD-ROM Edition.

Further detail of population estimates, land area, and population density for world urban areas with over 500,000 people (924 areas) is available with Demographia's World Urban Areas report (2014). Much of this data is based on the UN urban agglomerations, though a range of other sources are also used.

As of July 2023, Monaco is the country with the highest population density worldwide, with an estimated population of nearly ****** per square kilometer.

Human population density in 2000, by terrestrial ecoregion.

We summarized human population density by ecoregion using the Gridded Population of the World database and projections for 2015 (CIESIN et al. 2005). The mean for each ecoregion was extracted using a zonal statistics algorithm.

These data were derived by The Nature Conservancy, and were displayed in a map published in The Atlas of Global Conservation (Hoekstra et al., University of California Press, 2010). More information at http://nature.org/atlas.

Data derived from:

Center for International Earth Science Information Network (CIESIN), Columbia University; and Centro Internacional de Agricultura Tropical (CIAT). 2005. Gridded Population of the World Version 3 (GPWv3). Socioeconomic Data and Applications Center (SEDAC), Columbia University Palisades, New York. Available at http://sedac.ciesin.columbia.edu/gpw. Digital media.

United Nations Population Division (UNPD). 2007. Global population, largest urban agglomerations and cities of largest change. World Urbanization Prospects: The 2007 Revision Population Database. Available at http://esa.un.org/unup/index.asp.

For more about The Atlas of Global Conservation check out the web map (which includes links to download spatial data and view metadata) at http://maps.tnc.org/globalmaps.html. You can also read more detail about the Atlas at http://www.nature.org/science-in-action/leading-with-science/conservation-atlas.xml, or buy the book at http://www.ucpress.edu/book.php?isbn=9780520262560

Please cite our paper if you publish material based on those datasets

G. Khodabandelou, V. Gauthier, M. El-Yacoubi, M. Fiore, "Estimation of Static and Dynamic Urban Populations with Mobile Network Metadata", in IEEE Trans. on Mobile Computing, 2018 (in Press). 10.1109/TMC.2018.2871156

Abstract

Communication-enabled devices that are physically carried by individuals are today pervasive,
which opens unprecedented opportunities for collecting digital metadata about the mobility of large populations. In this paper, we propose a novel methodology for the estimation of people density at metropolitan scales, using subscriber presence metadata collected by a mobile operator. We show that our approach suits the estimation of static population densities, i.e., of the distribution of dwelling units per urban area contained in traditional censuses. Specifically, it achieves higher accuracy than that granted by previous equivalent solutions. In addition, our approach enables the estimation of dynamic population densities, i.e., the time-varying distributions of people in a conurbation. Our results build on significant real-world mobile network metadata and relevant ground-truth information in multiple urban scenarios.

Dataset Columns

This dataset cover one month of data taken during the month of April 2015 for three Italian cities: Rome, Milan, Turin. The raw data has been provided during the Telecom Italia Big Data Challenge (http://www.telecomitalia.com/tit/en/innovazione/archivio/big-data-challenge-2015.html)

1. grid_id: the coordinate of the grid can be retrieved with the shapefile of a given city
2. date: format Y-M-D H:M:S
4. landuse_label: the land use label has been computed by through method described in [2]
5. presence: presence data of a given grid id as provided by the Telecom Italia Big Data Challenge
6. population: Census population of a given grid block as defined by the Istituto nazionale di statistica (ISTAT https://www.istat.it/en/censuses) in 2011
7. estimation: Dynamics density population estimation (in person) as the result of the method described in [1]
8. area: surface of the "grid id" considered in km^2
9. geometry: the shape of the area considered with the EPSG:3003 coordinate system (only with quilt)

Note

Due to legal constraints, we cannot share directly the original data from Telecom Italia Big Data Challenge we used to build this dataset.

Easy access to this dataset with quilt

Install the dataset repository:

$ quilt install vgauthier/DynamicPopEstimate

Use the dataset with a Panda Dataframe

>>> from quilt.data.vgauthier import DynamicPopEstimate
>>> import pandas as pd
>>> df = pd.DataFrame(DynamicPopEstimate.rome())

Use the dataset with a GeoPanda Dataframe

>>> from quilt.data.vgauthier import DynamicPopEstimate
>>> import geopandas as gpd
>>> df = gpd.DataFrame(DynamicPopEstimate.rome())

References

[1] G. Khodabandelou, V. Gauthier, M. El-Yacoubi, M. Fiore, "Population estimation from mobile network traffic metadata", in proc of the 17th International Symposium on A World of Wireless, Mobile and Multimedia Networks (WoWMoM), pp. 1 - 9, 2016.

[2] A. Furno, M. Fiore, R. Stanica, C. Ziemlicki, and Z. Smoreda, "A tale of ten cities: Characterizing signatures of mobile traffic in urban areas," IEEE Transactions on Mobile Computing, Volume: 16, Issue: 10, 2017.

This dataset describes counterfactual public transport networks that were simulated for 36 world cities, and the aggregate data discussed in the paper in which these data are published. UNIT OF MEASURE: Meters of network length. RESOLUTION: 1:1000000. COMPLETENESS: 100%. POLICY CONTEXT: Regional and urban policies. METHODOLOGY: Network expansion modelling. DATA SOURCES: FUA boundaries and population sizes according to 1km GHSL population grids (release 2019). LEVEL OF AGGREGATION: cities defined on population density clusters. UNCERTAINTY AND LIMITATIONS: Data based on simulation exercise with the explicit aim of creating counterfactual networks.

In 2023, Washington, D.C. had the highest population density in the United States, with 11,130.69 people per square mile. As a whole, there were about 94.83 residents per square mile in the U.S., and Alaska was the state with the lowest population density, with 1.29 residents per square mile. The problem of population density Simply put, population density is the population of a country divided by the area of the country. While this can be an interesting measure of how many people live in a country and how large the country is, it does not account for the degree of urbanization, or the share of people who live in urban centers. For example, Russia is the largest country in the world and has a comparatively low population, so its population density is very low. However, much of the country is uninhabited, so cities in Russia are much more densely populated than the rest of the country. Urbanization in the United States While the United States is not very densely populated compared to other countries, its population density has increased significantly over the past few decades. The degree of urbanization has also increased, and well over half of the population lives in urban centers.

Canada, with 3.33 people per square kilometre, has one of the lowest population densities in the world. In 2001, most of Canada's population of 30,007,094 lived within 200 kilometres of the United States (along Canada's south). In fact, the inhabitants of our three biggest cities -- Toronto, Montréal and Vancouver -- can drive to the border in less than two hours. Thousands of kilometres to the north, our polar region -- the Yukon, the Northwest Territories and Nunavut -- is relatively empty, embracing 41% of our land mass but only 0.3% of our population. An inset map shows in greater detail the Windsor-Québec Corridor where a high concentration of Canadians live.

Due to rapid urbanization over the past 20 years, many newly developed areas have lagged in socio-economic maturity, creating an imbalance with older cities and leading to the rise of "ghost cities". However, the complexity of socio-economic factors has hindered global studies from measuring this phenomenon. To address this gap, a unified framework based on urban vitality theory and multi-source data is proposed to measure the Ghost City Index (GCI), which has been validated using various data sources. The study encompasses 8,841 natural cities worldwide with areas exceeding 5 km², categorizing each into new urban areas (developed after 2005) and old urban areas (developed before 2005). Urban vitality was gauged using the density of road networks, points of interest (POIs), and population density with 1 km resolution across morphological, functional, and social dimensions. By comparing urban vitality in new and old urban areas, we quantify the GCI globally using the theory of urban vitality for the first time. The results reveal that the vitality of new urban areas is 7.69% that of old ones. The top 5% (442) of cities were designated as ghost cities, a finding mirrored by news media and other research. This study sheds light on strategies for sustainable global urbanization, crucial for the United Nations' Sustainable Development Goals.The code file gives the calculation process of data respectively, and the excel file gives the obtained data. For the explanation of the fields in “citypoint.shp”, please refer to the Supplementary Information of the paper (https://doi.org/10.1016/j.habitatint.2025.103350).Ref: Zhang, Y., Tu, T., & Long, Y. (2025). Inferring ghost cities on the globe in newly developed urban areas based on urban vitality with multi-source data. Habitat International, 158, 103350. https://doi.org/10.1016/j.habitatint.2025.103350

Australia Population Density: People per Square Km data was reported at 3.382 Person/sq km in 2022. This records an increase from the previous number of 3.339 Person/sq km for 2021. Australia Population Density: People per Square Km data is updated yearly, averaging 2.263 Person/sq km from Dec 1961 (Median) to 2022, with 62 observations. The data reached an all-time high of 3.382 Person/sq km in 2022 and a record low of 1.365 Person/sq km in 1961. Australia Population Density: People per Square Km data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Australia – Table AU.World Bank.WDI: Population and Urbanization Statistics. Population density is midyear population divided by land area in square kilometers. Population is based on the de facto definition of population, which counts all residents regardless of legal status or citizenship--except for refugees not permanently settled in the country of asylum, who are generally considered part of the population of their country of origin. Land area is a country's total area, excluding area under inland water bodies, national claims to continental shelf, and exclusive economic zones. In most cases the definition of inland water bodies includes major rivers and lakes.;Food and Agriculture Organization and World Bank population estimates.;Weighted average;

This map is part of an interactive Story Map series about global change in the US.With the global human population expected to exceed 8 billion people by 2030, our species is already irreversibly changing the future of our planet. The US itself is expected to grow by 16.5% to over 360 million people, making it the third largest country in the world, behind India and China. This population increase isn’t distributed evenly - 81% of people will live in cities, urban, and suburban areas, which will continue to shape how resources are produced, transported, and consumed. The percent of foreign-born and second-generation immigrants in the US is also expected to rise in the future, contributing to an increasingly diverse population. Across the globe, immigration will likely account for significant population changes in the near future, as climate change fuels drought, crop failures, and political instability, creating climate refugees particularly among countries who do not have the infrastructure to mitigate or adapt to global change. Numbers aren’t the only thing that matter: people of different socioeconomic backgrounds use resources differently, both within and between countries.If the rest of the world used energy as intensely as the United States does, the world population would need more than 4 entire Earths to provide us with the resources to feed this rate consumption. This unfortunately means that even regions of the US that contribute less towards the problems of global change will still feel their impacts. To ensure a high quality of life for all citizens, we must address not only population growth, but also excess consumption of and reliance on resources across different regions. Geographic, population, and economic differences among regions can provide opportunities for success in the face of global change. Renewable energy sources have created entrepreneurial economic ventures, and communities have found environmental solutions through forming sustainable local food systems. Environmental justice movements are working now to ensure that all citizens have access to nature, recreational areas, and a healthy future for all.

Important Note: This item is in mature support as of June 2023 and will retire in December 2025. A new version of this item is available for your use.The layers going from 1:1 to 1:1.5M present the 2010 Census Urbanized Areas (UA) and Urban Clusters (UC). A UA consists of contiguous, densely settled census block groups (BGs) and census blocks that meet minimum population density requirements (1000 people per square mile (ppsm) / 500 ppsm), along with adjacent densely settled census blocks that together encompass a population of at least 50,000 people. A UC consists of contiguous, densely settled census BGs and census blocks that meet minimum population density requirements, along with adjacent densely settled census blocks that together encompass a population of at least 2,500 people, but fewer than 50,000 people. The dataset covers the 50 States plus the District of Columbia within United States. The layer going over 1:1.5M presents the urban areas in the United States derived from the urban areas layer of the Digital Chart of the World (DCW). It provides information about the locations, names, and populations of urbanized areas for conducting geographic analysis on national and large regional scales. To download the data for this layer as a layer package for use in ArcGIS desktop applications, refer to USA Census Urban Areas.

Canada, with 3.33 people per square kilometre, has one of the lowest population densities in the world. In 2001, most of Canada's population of 30,007,094 lived within 200 kilometres of the United States (along Canada's south). In fact, the inhabitants of our three biggest cities -- Toronto, Montréal and Vancouver -- can drive to the border in less than two hours. Thousands of kilometres to the north, our polar region -- the Yukon, the Northwest Territories and Nunavut -- is relatively empty, embracing 41% of our land mass but only 0.3% of our population. An inset map shows in greater detail the Windsor-Québec Corridor where a high concentration of Canadians live.

As of 2025, Tokyo-Yokohama in Japan was the largest world urban agglomeration, with 37 million people living there. Delhi ranked second with more than 34 million, with Shanghai in third with more than 30 million inhabitants.

In 2022, the estimated population density of China was around 150.42 people per square kilometer. That year, China's population size declined for the first time in decades. Although China is the most populous country in the world, its overall population density is not much higher than the average population density in Asia. Uneven population distribution China is one of the largest countries in terms of land area, and its population density figures vary dramatically from region to region. Overall, the coastal regions in the East and Southeast have the highest population densities, as they belong to the more economically developed regions of the country. These coastal regions also have a higher urbanization rate. On the contrary, the regions in the West are covered with mountain landscapes which are not suitable for the development of big cities. Populous cities in China Several Chinese cities rank among the most populous cities in the world. According to estimates, Beijing and Shanghai will rank among the top ten megacities in the world by 2030. Both cities are also the largest Chinese cities in terms of land area. The previous colonial regions, Macao and Hong Kong, are two of the most densely populated cities in the world.

Canada, with 3.3 people per square kilometre, has one of the lowest population densities in the world. In 2001, most of Canada's population of 30 million lived within 200 kilometres of the United States. In fact, the inhabitants of our three biggest cities — Toronto, Montréal and Vancouver — can drive to the border in less than two hours. Thousands of kilometres to the north, our polar region — the Yukon Territory, the Northwest Territories and Nunavut — is relatively empty, embracing 41% of our land mass but only 0.3% of our population. Human habitation in the solitary north clings largely to scattered settlements: villages among vast expanses of virgin ice, snow, tundra and taiga.