The region of present-day China has historically been the most populous region in the world; however, its population development has fluctuated throughout history. In 2022, China was overtaken as the most populous country in the world, and current projections suggest its population is heading for a rapid decline in the coming decades. Transitions of power lead to mortality The source suggests that conflict, and the diseases brought with it, were the major obstacles to population growth throughout most of the Common Era, particularly during transitions of power between various dynasties and rulers. It estimates that the total population fell by approximately 30 million people during the 14th century due to the impact of Mongol invasions, which inflicted heavy losses on the northern population through conflict, enslavement, food instability, and the introduction of bubonic plague. Between 1850 and 1870, the total population fell once more, by more than 50 million people, through further conflict, famine and disease; the most notable of these was the Taiping Rebellion, although the Miao an Panthay Rebellions, and the Dungan Revolt, also had large death tolls. The third plague pandemic also originated in Yunnan in 1855, which killed approximately two million people in China. 20th and 21st centuries There were additional conflicts at the turn of the 20th century, which had significant geopolitical consequences for China, but did not result in the same high levels of mortality seen previously. It was not until the overlapping Chinese Civil War (1927-1949) and Second World War (1937-1945) where the death tolls reached approximately 10 and 20 million respectively. Additionally, as China attempted to industrialize during the Great Leap Forward (1958-1962), economic and agricultural mismanagement resulted in the deaths of tens of millions (possibly as many as 55 million) in less than four years, during the Great Chinese Famine. This mortality is not observable on the given dataset, due to the rapidity of China's demographic transition over the entire period; this saw improvements in healthcare, sanitation, and infrastructure result in sweeping changes across the population. The early 2020s marked some significant milestones in China's demographics, where it was overtaken by India as the world's most populous country, and its population also went into decline. Current projections suggest that China is heading for a "demographic disaster", as its rapidly aging population is placing significant burdens on China's economy, government, and society. In stark contrast to the restrictive "one-child policy" of the past, the government has introduced a series of pro-fertility incentives for couples to have larger families, although the impact of these policies are yet to materialize. If these current projections come true, then China's population may be around half its current size by the end of the century.

The statistic shows the total population of India from 2019 to 2029. In 2023, the estimated total population in India amounted to approximately 1.43 billion people.

Total population in India

India currently has the second-largest population in the world and is projected to overtake top-ranking China within forty years. Its residents comprise more than one-seventh of the entire world’s population, and despite a slowly decreasing fertility rate (which still exceeds the replacement rate and keeps the median age of the population relatively low), an increasing life expectancy adds to an expanding population. In comparison with other countries whose populations are decreasing, such as Japan, India has a relatively small share of aged population, which indicates the probability of lower death rates and higher retention of the existing population.

With a land mass of less than half that of the United States and a population almost four times greater, India has recognized potential problems of its growing population. Government attempts to implement family planning programs have achieved varying degrees of success. Initiatives such as sterilization programs in the 1970s have been blamed for creating general antipathy to family planning, but the combined efforts of various family planning and contraception programs have helped halve fertility rates since the 1960s. The population growth rate has correspondingly shrunk as well, but has not yet reached less than one percent growth per year.

As home to thousands of ethnic groups, hundreds of languages, and numerous religions, a cohesive and broadly-supported effort to reduce population growth is difficult to create. Despite that, India is one country to watch in coming years. It is also a growing economic power; among other measures, its GDP per capita was expected to triple between 2003 and 2013 and was listed as the third-ranked country for its share of the global gross domestic product.

• The current US Census Bureau world population estimate in June 2019 shows that the current global population is 7,577,130,400 people on Earth, which far exceeds the world population of 7.2 billion in 2015. Our estimate based on UN data shows the world's population surpassing 7.7 billion.
• China is the most populous country in the world with a population exceeding 1.4 billion. It is one of just two countries with a population of more than 1 billion, with India being the second. As of 2018, India has a population of over 1.355 billion people, and its population growth is expected to continue through at least 2050. By the year 2030, India is expected to become the most populous country in the world. This is because India’s population will grow, while China is projected to see a loss in population.
• The following 11 countries that are the most populous in the world each have populations exceeding 100 million. These include the United States, Indonesia, Brazil, Pakistan, Nigeria, Bangladesh, Russia, Mexico, Japan, Ethiopia, and the Philippines. Of these nations, all are expected to continue to grow except Russia and Japan, which will see their populations drop by 2030 before falling again significantly by 2050.
• Many other nations have populations of at least one million, while there are also countries that have just thousands. The smallest population in the world can be found in Vatican City, where only 801 people reside.
• In 2018, the world’s population growth rate was 1.12%. Every five years since the 1970s, the population growth rate has continued to fall. The world’s population is expected to continue to grow larger but at a much slower pace. By 2030, the population will exceed 8 billion. In 2040, this number will grow to more than 9 billion. In 2055, the number will rise to over 10 billion, and another billion people won’t be added until near the end of the century. The current annual population growth estimates from the United Nations are in the millions - estimating that over 80 million new lives are added yearly.
• This population growth will be significantly impacted by nine specific countries which are situated to contribute to the population growth more quickly than other nations. These nations include the Democratic Republic of the Congo, Ethiopia, India, Indonesia, Nigeria, Pakistan, Uganda, the United Republic of Tanzania, and the United States of America. Particularly of interest, India is on track to overtake China's position as the most populous country by 2030. Additionally, multiple nations within Africa are expected to double their populations before fertility rates begin to slow entirely.

Content

• In this Dataset, we have Historical Population data for every Country/Territory in the world by different parameters like Area Size of the Country/Territory, Name of the Continent, Name of the Capital, Density, Population Growth Rate, Ranking based on Population, World Population Percentage, etc. >Dataset Glossary (Column-Wise):
• Rank: Rank by Population.
• CCA3: 3 Digit Country/Territories Code.
• Country/Territories: Name of the Country/Territories.
• Capital: Name of the Capital.
• Continent: Name of the Continent.
• 2022 Population: Population of the Country/Territories in the year 2022.
• 2020 Population: Population of the Country/Territories in the year 2020.
• 2015 Population: Population of the Country/Territories in the year 2015.
• 2010 Population: Population of the Country/Territories in the year 2010.
• 2000 Population: Population of the Country/Territories in the year 2000.
• 1990 Population: Population of the Country/Territories in the year 1990.
• 1980 Population: Population of the Country/Territories in the year 1980.
• 1970 Population: Population of the Country/Territories in the year 1970.
• Area (km²): Area size of the Country/Territories in square kilometers.
• Density (per km²): Population Density per square kilometer.
• Growth Rate: Population Growth Rate by Country/Territories.
• World Population Percentage: The population percentage by each Country/Territories.

Explore World Bank Health, Nutrition and Population Statistics dataset featuring a wide range of indicators such as School enrollment, UHC service coverage index, Fertility rate, and more from countries like Bahrain, China, India, Kuwait, Oman, Qatar, and Saudi Arabia.

School enrollment, tertiary, UHC service coverage index, Wanted fertility rate, People with basic handwashing facilities, urban population, Rural population, AIDS estimated deaths, Domestic private health expenditure, Fertility rate, Domestic general government health expenditure, Age dependency ratio, Postnatal care coverage, People using safely managed drinking water services, Unemployment, Lifetime risk of maternal death, External health expenditure, Population growth, Completeness of birth registration, Urban poverty headcount ratio, Prevalence of undernourishment, People using at least basic sanitation services, Prevalence of current tobacco use, Urban poverty headcount ratio, Tuberculosis treatment success rate, Low-birthweight babies, Female headed households, Completeness of birth registration, Urban population growth, Antiretroviral therapy coverage, Labor force, and more.

Bahrain, China, India, Kuwait, Oman, Qatar, Saudi Arabia

Follow data.kapsarc.org for timely data to advance energy economics research.

The Country-Level Population and Downscaled Projections Based on Special Report on Emissions Scenarios (SRES) B2 Scenario, 1990-2100, were based on the UN 1998 Medium Long Range Projection for the years 1995 to 2100. The official version projects population for 8 regions of the world including Africa, Asia (minus India and China), India, China, Europe, Latin America, Northern America, and Oceania. This data set is produced and distributed by the Columbia University Center for International Earth Science Information Network (CIESIN).

PerCapita_CO2_Footprint_InDioceses_FULLBurhans, Molly A., Cheney, David M., Gerlt, R.. . “PerCapita_CO2_Footprint_InDioceses_FULL”. Scale not given. Version 1.0. MO and CT, USA: GoodLands Inc., Environmental Systems Research Institute, Inc., 2019.MethodologyThis is the first global Carbon footprint of the Catholic population. We will continue to improve and develop these data with our research partners over the coming years. While it is helpful, it should also be viewed and used as a "beta" prototype that we and our research partners will build from and improve. The years of carbon data are (2010) and (2015 - SHOWN). The year of Catholic data is 2018. The year of population data is 2016. Care should be taken during future developments to harmonize the years used for catholic, population, and CO2 data.1. Zonal Statistics: Esri Population Data and Dioceses --> Population per dioceses, non Vatican based numbers2. Zonal Statistics: FFDAS and Dioceses and Population dataset --> Mean CO2 per Diocese3. Field Calculation: Population per Diocese and Mean CO2 per diocese --> CO2 per Capita4. Field Calculation: CO2 per Capita * Catholic Population --> Catholic Carbon FootprintAssumption: PerCapita CO2Deriving per-capita CO2 from mean CO2 in a geography assumes that people's footprint accounts for their personal lifestyle and involvement in local business and industries that are contribute CO2. Catholic CO2Assumes that Catholics and non-Catholic have similar CO2 footprints from their lifestyles.Derived from:A multiyear, global gridded fossil fuel CO2 emission data product: Evaluation and analysis of resultshttp://ffdas.rc.nau.edu/About.htmlRayner et al., JGR, 2010 - The is the first FFDAS paper describing the version 1.0 methods and results published in the Journal of Geophysical Research.Asefi et al., 2014 - This is the paper describing the methods and results of the FFDAS version 2.0 published in the Journal of Geophysical Research.Readme version 2.2 - A simple readme file to assist in using the 10 km x 10 km, hourly gridded Vulcan version 2.2 results.Liu et al., 2017 - A paper exploring the carbon cycle response to the 2015-2016 El Nino through the use of carbon cycle data assimilation with FFDAS as the boundary condition for FFCO2."S. Asefi‐Najafabady P. J. Rayner K. R. Gurney A. McRobert Y. Song K. Coltin J. Huang C. Elvidge K. BaughFirst published: 10 September 2014 https://doi.org/10.1002/2013JD021296 Cited by: 30Link to FFDAS data retrieval and visualization: http://hpcg.purdue.edu/FFDAS/index.phpAbstractHigh‐resolution, global quantification of fossil fuel CO2 emissions is emerging as a critical need in carbon cycle science and climate policy. We build upon a previously developed fossil fuel data assimilation system (FFDAS) for estimating global high‐resolution fossil fuel CO2 emissions. We have improved the underlying observationally based data sources, expanded the approach through treatment of separate emitting sectors including a new pointwise database of global power plants, and extended the results to cover a 1997 to 2010 time series at a spatial resolution of 0.1°. Long‐term trend analysis of the resulting global emissions shows subnational spatial structure in large active economies such as the United States, China, and India. These three countries, in particular, show different long‐term trends and exploration of the trends in nighttime lights, and population reveal a decoupling of population and emissions at the subnational level. Analysis of shorter‐term variations reveals the impact of the 2008–2009 global financial crisis with widespread negative emission anomalies across the U.S. and Europe. We have used a center of mass (CM) calculation as a compact metric to express the time evolution of spatial patterns in fossil fuel CO2 emissions. The global emission CM has moved toward the east and somewhat south between 1997 and 2010, driven by the increase in emissions in China and South Asia over this time period. Analysis at the level of individual countries reveals per capita CO2 emission migration in both Russia and India. The per capita emission CM holds potential as a way to succinctly analyze subnational shifts in carbon intensity over time. Uncertainties are generally lower than the previous version of FFDAS due mainly to an improved nightlight data set."Global Diocesan Boundaries:Burhans, M., Bell, J., Burhans, D., Carmichael, R., Cheney, D., Deaton, M., Emge, T. Gerlt, B., Grayson, J., Herries, J., Keegan, H., Skinner, A., Smith, M., Sousa, C., Trubetskoy, S. “Diocesean Boundaries of the Catholic Church” [Feature Layer]. Scale not given. Version 1.2. Redlands, CA, USA: GoodLands Inc., Environmental Systems Research Institute, Inc., 2016.Using: ArcGIS. 10.4. Version 10.0. Redlands, CA: Environmental Systems Research Institute, Inc., 2016.Boundary ProvenanceStatistics and Leadership DataCheney, D.M. “Catholic Hierarchy of the World” [Database]. Date Updated: August 2019. Catholic Hierarchy. Using: Paradox. Retrieved from Original Source.Catholic HierarchyAnnuario Pontificio per l’Anno .. Città del Vaticano :Tipografia Poliglotta Vaticana, Multiple Years.The data for these maps was extracted from the gold standard of Church data, the Annuario Pontificio, published yearly by the Vatican. The collection and data development of the Vatican Statistics Office are unknown. GoodLands is not responsible for errors within this data. We encourage people to document and report errant information to us at data@good-lands.org or directly to the Vatican.Additional information about regular changes in bishops and sees comes from a variety of public diocesan and news announcements.GoodLands’ polygon data layers, version 2.0 for global ecclesiastical boundaries of the Roman Catholic Church:Although care has been taken to ensure the accuracy, completeness and reliability of the information provided, due to this being the first developed dataset of global ecclesiastical boundaries curated from many sources it may have a higher margin of error than established geopolitical administrative boundary maps. Boundaries need to be verified with appropriate Ecclesiastical Leadership. The current information is subject to change without notice. No parties involved with the creation of this data are liable for indirect, special or incidental damage resulting from, arising out of or in connection with the use of the information. We referenced 1960 sources to build our global datasets of ecclesiastical jurisdictions. Often, they were isolated images of dioceses, historical documents and information about parishes that were cross checked. These sources can be viewed here:https://docs.google.com/spreadsheets/d/11ANlH1S_aYJOyz4TtG0HHgz0OLxnOvXLHMt4FVOS85Q/edit#gid=0To learn more or contact us please visit: https://good-lands.org/Esri Gridded Population Data 2016DescriptionThis layer is a global estimate of human population for 2016. Esri created this estimate by modeling a footprint of where people live as a dasymetric settlement likelihood surface, and then assigned 2016 population estimates stored on polygons of the finest level of geography available onto the settlement surface. Where people live means where their homes are, as in where people sleep most of the time, and this is opposed to where they work. Another way to think of this estimate is a night-time estimate, as opposed to a day-time estimate.Knowledge of population distribution helps us understand how humans affect the natural world and how natural events such as storms and earthquakes, and other phenomena affect humans. This layer represents the footprint of where people live, and how many people live there.Dataset SummaryEach cell in this layer has an integer value with the estimated number of people likely to live in the geographic region represented by that cell. Esri additionally produced several additional layers World Population Estimate Confidence 2016: the confidence level (1-5) per cell for the probability of people being located and estimated correctly. World Population Density Estimate 2016: this layer is represented as population density in units of persons per square kilometer.World Settlement Score 2016: the dasymetric likelihood surface used to create this layer by apportioning population from census polygons to the settlement score raster.To use this layer in analysis, there are several properties or geoprocessing environment settings that should be used:Coordinate system: WGS_1984. This service and its underlying data are WGS_1984. We do this because projecting population count data actually will change the populations due to resampling and either collapsing or splitting cells to fit into another coordinate system. Cell Size: 0.0013474728 degrees (approximately 150-meters) at the equator. No Data: -1Bit Depth: 32-bit signedThis layer has query, identify, pixel, and export image functions enabled, and is restricted to a maximum analysis size of 30,000 x 30,000 pixels - an area about the size of Africa.Frye, C. et al., (2018). Using Classified and Unclassified Land Cover Data to Estimate the Footprint of Human Settlement. Data Science Journal. 17, p.20. DOI: http://doi.org/10.5334/dsj-2018-020.What can you do with this layer?This layer is unsuitable for mapping or cartographic use, and thus it does not include a convenient legend. Instead, this layer is useful for analysis, particularly for estimating counts of people living within watersheds, coastal areas, and other areas that do not have standard boundaries. Esri recommends using the Zonal Statistics tool or the Zonal Statistics to Table tool where you provide input zones as either polygons, or raster data, and the tool will summarize the count of population within those zones. https://www.esri.com/arcgis-blog/products/arcgis-living-atlas/data-management/2016-world-population-estimate-services-are-now-available/

Rising global food insecurity driven by population growth needs urgent measure for universal access to food. This research employs Comparative Performance Analysis (CPA) to evaluate the Global Food Security Index (GFSI), its components [Affordability (AF), Availability (AV), Quality & Safety (Q&S) and Sustainability & Adaptation (S&A)] in tandem with Annual Population Change (APC) for world’s five most populous countries (India, China, USA, Indonesia and Pakistan) using dataset spanning from 2012 to 2022. CPA is applied using descriptive analysis, correlation analysis, Rule of Thumb (RoT) and testing of hypothesis etc. RoT is used with a new analytical approach by applying the significance measures for correlation coefficients. The study suggests that India should enhance its GFSI rank by addressing AF and mitigating the adverse effects of APC on GFSI with a particular focus on Q&S and S&A. China needs to reduce the impact of APC on GFSI by prioritizing AV and S&A. The USA is managing its GFSI well, but focused efforts are still required to reduce APC’s impact on Q&S and S&A. Indonesia should improve across all sectors with a particular focus on APC reduction and mitigating its adverse effects on AF, AV, and S&A. Pakistan should intensify efforts to boost its rank and enhance all sectors with reducing APC. There is statistically significant and negative relation between GFSI and APC for China, Indonesia and found insignificant for others countries. This study holds promise for providing crucial policy recommendations to enhance food security by tackling its underlying factors.

Explore the Saudi Arabia World Development Indicators dataset , including key indicators such as Access to clean fuels, Adjusted net enrollment rate, CO2 emissions, and more. Find valuable insights and trends for Saudi Arabia, Bahrain, Kuwait, Oman, Qatar, China, and India.

Indicator, Access to clean fuels and technologies for cooking, rural (% of rural population), Access to electricity (% of population), Adjusted net enrollment rate, primary, female (% of primary school age children), Adjusted net national income (annual % growth), Adjusted savings: education expenditure (% of GNI), Adjusted savings: mineral depletion (current US$), Adjusted savings: natural resources depletion (% of GNI), Adjusted savings: net national savings (current US$), Adolescents out of school (% of lower secondary school age), Adolescents out of school, female (% of female lower secondary school age), Age dependency ratio (% of working-age population), Agricultural methane emissions (% of total), Agriculture, forestry, and fishing, value added (current US$), Agriculture, forestry, and fishing, value added per worker (constant 2015 US$), Alternative and nuclear energy (% of total energy use), Annualized average growth rate in per capita real survey mean consumption or income, total population (%), Arms exports (SIPRI trend indicator values), Arms imports (SIPRI trend indicator values), Average working hours of children, working only, ages 7-14 (hours per week), Average working hours of children, working only, male, ages 7-14 (hours per week), Cause of death, by injury (% of total), Cereal yield (kg per hectare), Changes in inventories (current US$), Chemicals (% of value added in manufacturing), Child employment in agriculture (% of economically active children ages 7-14), Child employment in manufacturing, female (% of female economically active children ages 7-14), Child employment in manufacturing, male (% of male economically active children ages 7-14), Child employment in services (% of economically active children ages 7-14), Child employment in services, female (% of female economically active children ages 7-14), Children (ages 0-14) newly infected with HIV, Children in employment, study and work (% of children in employment, ages 7-14), Children in employment, unpaid family workers (% of children in employment, ages 7-14), Children in employment, wage workers (% of children in employment, ages 7-14), Children out of school, primary, Children out of school, primary, male, Claims on other sectors of the domestic economy (annual growth as % of broad money), CO2 emissions (kg per 2015 US$ of GDP), CO2 emissions (kt), CO2 emissions from other sectors, excluding residential buildings and commercial and public services (% of total fuel combustion), CO2 emissions from transport (% of total fuel combustion), Communications, computer, etc. (% of service exports, BoP), Condom use, population ages 15-24, female (% of females ages 15-24), Container port traffic (TEU: 20 foot equivalent units), Contraceptive prevalence, any method (% of married women ages 15-49), Control of Corruption: Estimate, Control of Corruption: Percentile Rank, Upper Bound of 90% Confidence Interval, Control of Corruption: Standard Error, Coverage of social insurance programs in 4th quintile (% of population), CPIA building human resources rating (1=low to 6=high), CPIA debt policy rating (1=low to 6=high), CPIA policies for social inclusion/equity cluster average (1=low to 6=high), CPIA public sector management and institutions cluster average (1=low to 6=high), CPIA quality of budgetary and financial management rating (1=low to 6=high), CPIA transparency, accountability, and corruption in the public sector rating (1=low to 6=high), Current education expenditure, secondary (% of total expenditure in secondary public institutions), DEC alternative conversion factor (LCU per US$), Deposit interest rate (%), Depth of credit information index (0=low to 8=high), Diarrhea treatment (% of children under 5 who received ORS packet), Discrepancy in expenditure estimate of GDP (current LCU), Domestic private health expenditure per capita, PPP (current international $), Droughts, floods, extreme temperatures (% of population, average 1990-2009), Educational attainment, at least Bachelor's or equivalent, population 25+, female (%) (cumulative), Educational attainment, at least Bachelor's or equivalent, population 25+, male (%) (cumulative), Educational attainment, at least completed lower secondary, population 25+, female (%) (cumulative), Educational attainment, at least completed primary, population 25+ years, total (%) (cumulative), Educational attainment, at least Master's or equivalent, population 25+, male (%) (cumulative), Educational attainment, at least Master's or equivalent, population 25+, total (%) (cumulative), Electricity production from coal sources (% of total), Electricity production from nuclear sources (% of total), Employers, total (% of total employment) (modeled ILO estimate), Employment in industry (% of total employment) (modeled ILO estimate), Employment in services, female (% of female employment) (modeled ILO estimate), Employment to population ratio, 15+, male (%) (modeled ILO estimate), Employment to population ratio, ages 15-24, total (%) (national estimate), Energy use (kg of oil equivalent per capita), Export unit value index (2015 = 100), Exports of goods and services (% of GDP), Exports of goods, services and primary income (BoP, current US$), External debt stocks (% of GNI), External health expenditure (% of current health expenditure), Female primary school age children out-of-school (%), Female share of employment in senior and middle management (%), Final consumption expenditure (constant 2015 US$), Firms expected to give gifts in meetings with tax officials (% of firms), Firms experiencing losses due to theft and vandalism (% of firms), Firms formally registered when operations started (% of firms), Fixed broadband subscriptions, Fixed telephone subscriptions (per 100 people), Foreign direct investment, net outflows (% of GDP), Forest area (% of land area), Forest area (sq. km), Forest rents (% of GDP), GDP growth (annual %), GDP per capita (constant LCU), GDP per unit of energy use (PPP $ per kg of oil equivalent), GDP, PPP (constant 2017 international $), General government final consumption expenditure (current LCU), GHG net emissions/removals by LUCF (Mt of CO2 equivalent), GNI growth (annual %), GNI per capita (constant LCU), GNI, PPP (current international $), Goods and services expense (current LCU), Government Effectiveness: Percentile Rank, Government Effectiveness: Percentile Rank, Lower Bound of 90% Confidence Interval, Government Effectiveness: Standard Error, Gross capital formation (annual % growth), Gross capital formation (constant 2015 US$), Gross capital formation (current LCU), Gross fixed capital formation, private sector (% of GDP), Gross intake ratio in first grade of primary education, male (% of relevant age group), Gross intake ratio in first grade of primary education, total (% of relevant age group), Gross national expenditure (current LCU), Gross national expenditure (current US$), Households and NPISHs Final consumption expenditure (constant LCU), Households and NPISHs Final consumption expenditure (current US$), Households and NPISHs Final consumption expenditure, PPP (constant 2017 international $), Households and NPISHs final consumption expenditure: linked series (current LCU), Human capital index (HCI) (scale 0-1), Human capital index (HCI), male (scale 0-1), Immunization, DPT (% of children ages 12-23 months), Import value index (2015 = 100), Imports of goods and services (% of GDP), Incidence of HIV, ages 15-24 (per 1,000 uninfected population ages 15-24), Incidence of HIV, all (per 1,000 uninfected population), Income share held by highest 20%, Income share held by lowest 20%, Income share held by third 20%, Individuals using the Internet (% of population), Industry (including construction), value added (constant LCU), Informal payments to public officials (% of firms), Intentional homicides, male (per 100,000 male), Interest payments (% of expense), Interest rate spread (lending rate minus deposit rate, %), Internally displaced persons, new displacement associated with conflict and violence (number of cases), International tourism, expenditures for passenger transport items (current US$), International tourism, expenditures for travel items (current US$), Investment in energy with private participation (current US$), Labor force participation rate for ages 15-24, female (%) (modeled ILO estimate), Development

Saudi Arabia, Bahrain, Kuwait, Oman, Qatar, China, India Follow data.kapsarc.org for timely data to advance energy economics research..

The dataset contains Year and State wise Density of Population

Note: 1. The 1981 Census could not be held in Assam. Total Population for 1981 has been worked out by Interpolation. 2. Includes estimated population of Paomata, Mao Maram and Purul sub-divisions of Senapati District of Manipur for 2001. 3. For working out the density of India and Jammu & Kashmir for 1991,2001, the entire area and population of those portions of Jammu & Kashmir which are under illegal occupation of Pakistan and China have not been taken into account.

The dataset contains Decade and State wise Urban, Rural, Total Population and Decadal Growth Rate

Note: 1. The Population figures exclude population of areas under unlawful occupation of Pakistan and China, where Census could not be taken. 2. In Arunachal Pradesh, the census was conducted for the first time in 1961. 3. Population data of Assam include Union Territory of Mizoram, which was carved out of Assam after the 1971. 4. The 1981 Census could not be held in Assam. Total Population for 1981 has been worked out by Interpolation. 5. The 1991 Census could not be held in Jammu & Kashmir. Total Population for 1991 has been worked out by Interpolation. 6. India and Manipur figures include estimated Population for those of the three sub-divisions viz., Mao Maram,Paomata and Purul of Senapati district of Manipur as census result of 2001 in these three sub-divisions were cancelled due to technical and administrative reasons

The aim of the article is to compare health system outcomes in the BRICS countries, assess the trends of their changes in 2000−2017, and verify whether they are in any way correlated with the economic context. The indicators considered were: nominal and per capita current health expenditure, government health expenditure, gross domestic product (GDP) per capita, GDP growth, unemployment, inflation, and composition of GDP. The study covered five countries of the BRICS group over a period of 18 years. We decided to characterize countries covered with a dataset of selected indicators describing population health status, namely: life expectancy at birth, level of immunization, infant mortality rate, maternal mortality ratio, and tuberculosis case detection rate. We constructed a unified synthetic measure depicting the performance of individual health systems in terms of their outcomes with a single numerical value. Descriptive statistical analysis of quantitative traits consisted of the arithmetic mean (xsr), standard deviation (SD), and, where needed, the median. The normality of the distribution of variables was tested with the Shapiro–Wilk test. Spearman's rho and Kendall tau rank coefficients were used for correlation analysis between measures. The correlation analyses have been supplemented with factor analysis. We found that the best results in terms of health care system performance were recorded in Russia, China, and Brazil. India and South Africa are noticeably worse. However, the entire group performs visibly worse than the developed countries. The health system outcomes appeared to correlate on a statistically significant scale with health expenditures per capita, governments involvement in health expenditures, GDP per capita, and industry share in GDP; however, these correlations are relatively weak, with the highest strength in the case of government's involvement in health expenditures and GDP per capita. Due to weak correlation with economic background, other factors may play a role in determining health system outcomes in BRICS countries. More research should be recommended to find them and determine to what extent and how exactly they affect health system outcomes.

This dataset contains selected indicators for monitoring progress towards green growth to support policy making and inform the public at large. The indicator bring together the OECD's statistics, indicators and measures of progress. The dataset covers OECD countries as well as BRIICS economies (Brazil, Russian Federation, India, Indonesia, China and South Africa), and selected countries when possible. The indicators are selected according to well specified criteria and embedded in a conceptual framework, which is structured around four groups to capture the main features of green growth: Environmental and resource productivity, to indicate whether economic growth is becoming greener with more efficient use of natural capital and to capture aspects of production which are rarely quantified in economic models and accounting frameworks; The natural asset base, to indicate the risks to growth from a declining natural asset base; Environmental quality of life, to indicate how environmental conditions affect the quality of life and wellbeing of people; Economic opportunities and policy responses, to indicate the effectiveness ofpolicies in delivering green growth and describe the societal responses needed to secure business and employment opportunities.

Recommended citation

Article citation will be added once the article is available.

Content

• Use of the dataset and full description
• Abstract
• Support
• Files included in the dataset
• Notes
• Data format description (columns)
• Data sources
• Changelog
• References

Use of the dataset and full description

Before using the dataset, please read this document and the article describing the methodology, especially the "Discussion and limitations" section.

The article will be referenced here as soon as it is published.

Please notify us (johannes.guetschow@pik-potsdam.de) if you use the dataset so that we can keep track of how it is used and take that into consideration when updating and improving the dataset.

When using this dataset or one of its updates, please cite the DOI of the precise version of the dataset used and also the data description article which this dataset is supplement to (see above). Please consider also citing the relevant original sources when using the RCP-SSP-dwn dataset. See the full citations in the References section further below.

Support

If you encounter possible errors or other things that should be noted or need support in using the dataset or have any other questions regarding the dataset, please contact johannes.guetschow@pik-potsdam.de.

Abstract

This dataset provides country scenarios, downscaled from the RCP (Representative Concentration Pathways) and SSP (Shared Socio-Economic Pathways) scenario databases, using results from the SSP GDP (Gross Domestic Product) country model results as drivers for the downscaling process harmonized to and combined with up to date historical data.

Files included in the dataset

The repository comprises several datasets. Each dataset comes in a csv file. The file name is constructed from dataset properties as follows:

The "Source" flag indicates which input scenarios were used.

• PMRCP: RCP scenarios downscaled using the SSPs: emissions and socio-economic data; scenarios are available both harmonized to historical data and non-harmonized.
• PMSSP: Downscaled SSP IAM scenarios: emissions and socio-economic data; scenarios are available both harmonized to historical data and non-harmonized.

the "Bunkers" flag indicates if the input emissions scenarios have been corrected for emissions from international shipping and aviation (bunkers) before downscaling to country level or not. The flag is "B" for scenarios where emissions from bunkers have been removed before downscaling and "" (no flag) where they have not been removed.

The "Downscaling" flag indicates the downscaling technique used.

• IE: Convergence downscaling with exponential convergence of emissions intensities and convergence before transition to negative emissions.
• IC: Regional emission intensity growth rates for all countries.
• CS: Constant emission shares as a reference case independent of the socio-economic scenario.

All files contain data for all countries and variables. For detailed methodology descriptions we refer to the paper this dataset is a supplement to. A reference to the paper will be added as soon as it is published.

Finally the data description including detailed references is included: RCP-SSP-dwn_v1.0_data_description.pdf.

Notes

If you encounter problems with the size of the csv files please let us know, so we can find solutions for future releases of the data.

Data format description (columns)

"source"

For PMRCP files source values are

• RCPSSP
• PMRCP
• PMRCPMISC

For PMSSP files source values are

• SSPIAM
• PMSSP
• PMSSPMISC

For possible values of

"scenario"

For PMRCP files the scenarios have the format

For PMSSP files the scenarios have the format

Model codes in scenario names

• AIMCGE: AIM-CGE
• IMAGE: IMAGE
• GCAM4: GCAM
• MESGB: MESSAGE-GLOBIOM
• REMMP: REMIND-MAGPIE
• WITGB: WITCH-GLOBIOM

"country"

ISO 3166 three-letter country codes or custom codes for groups:

Additional "country" codes for country groups.

• EARTH: Aggregated emissions for all countries
• ANNEXI: Annex I Parties to the UNFCCC
• NONANNEXI: Non-Annex I Parties to the UNFCCC
• AOSIS: Alliance of Small Island States
• BASIC: BASIC countries (Brazil, South Africa, India and China)
• EU28: European Union (still including the UK)
• LDC: Least Developed Countries
• UMBRELLA: Umbrella Group

"category"

Category descriptions.

• IPCM0EL: Emissions: National Total excluding LULUCF
• ECO: Economical data
• DEMOGR: Demographical data

"entity"

Gases and gas baskets using global warming potentials (GWP) from either Second Assessment Report (SAR) or Fourth Assessment Report (AR4).

Gases / gas baskets and underlying global warming potentials

• CH4: Methane (CH₄)
• CO2: Carbon Dioxide (CO₂)
• N2O: Nitrous Oxide (N₂O)
• FGASES: Fluorinated Gases (SAR): HFCs, PFCs, SF₆, NF₃
• FGASESAR4: Fluorinated Gases (AR4): HFCs, PFCs, SF₆, NF₃
• KYOTOGHG: Kyoto greenhouse gases (SAR)
• KYOTOGHGAR4: Kyoto greenhouse gases (AR4)

"unit"

The following units are used:

• Million2011GKD: Million 2011 international dollars
• ThousandPers: Thousand persons
• kt: kilotonnes
• Mt: Megatonnes
• Gg: Gigagrams
• MtCO2eq: Megatonnes of CO₂ equivalents using the GWPs defined by "entity"
• GgCO2eq: Gigagrams of CO₂ equivalents using the GWPs defined by "entity"

Remaining columns

Years from 1850-2100.

Data Sources

The following data sources were used during the generation of this dataset:

Scenario data

• RCP scenarios website/data
• SSP basic elements website/data
• SSP IAM scenarios website/data
• SSP CMIP6 scenarios website/data

Historical data

• CDIAC data
• CEDS CMIP6 data paper/data
• EDGAR version 4.3.2: data, paper
• IMO GHG report report
• PRIMAP-hist v2.1 paper, <a

This dataset contains information about annual estimates of fine particulate matter (PM2.5) concentrations and trends beginning in 1998. PM2.5 refers to airborne particulate matter less than 2.5 µm in diameter; comprises several chemical and particulate constituents, including nitrate, ammonium, elemental carbons, organic carbons, silicon and sodium ions and dust, and originates from a variety of sources, including vehicle exhaust, forest fires, and industrial processes. Exposure to PM2.5 is a leading environmental risk factor for mortality and the global burden of disease.

Global and regional PM2.5 concentrations are estimated using a combination of satellite observations, chemical transport modeling, and ground-based monitoring. Annual and coarse-resolution averages correspond to a simple mean of within-grid values. Gridded datasets are provided to allow users to agglomerate data as best meets their particular needs.

Annual and monthly datasets are provided in NetCDF [.nc] format, with naming convention V6GL02.02.CNNPM25.REGION.YYYYMM_START-YYYYMM_END.nc. REGION refers to the file region (e.g. ‘Global’). YYYYMM_START and YYYYMM_END refer to the numeric start and end date of the file (e.g. for annual mean PM2.5 for 2015, YYYYMM_START is 201501 and YYYYMM_END is 201512). Gridded files use the WGS84 projection.

Variable names within these files include "lat" (latitude coordinate centers of the PM2.5 grid, "lon" (longitude coordinates centers of the PM2.5 grid), and "PM25" (gridded mean PM2.5 concentrations).

Processed summary files are available for annual global country-level means, Canada provincial-level means, China and India regional-level means, and US state-level means. Population-weighted estimates and total population describe only those people covered by the V6.GL.02.02 dataset and are provided by Gridded Population of the World, version 4 (GPWv4). Country borders are defined following the Database of Global Administrative Areas, version 3.6 (GAD3.6).

As per world agriculture statistics India is the world's largest producer of many fresh fruits like banana, mango, guava, papaya, lemon and vegetables like chickpea, okra and milk, major spices like chili pepper, ginger, fibrous crops such as jute, staples such as millets and castor oil seed. India is the second largest producer of wheat and rice, the world's major food staples.

India is currently the world's second largest producer of several dry fruits, agriculture-based textile raw materials, roots and tuber crops, pulses, farmed fish, eggs, coconut, sugarcane and numerous vegetables. India is ranked under the world's five largest producers of over 80% of agricultural produce items, including many cash crops such as coffee and cotton, in 2010. India is one of the world's five largest producers of livestock and poultry meat, with one of the fastest growth rates, as of 2011.

One report from 2008 claimed that India's population is growing faster than its ability to produce rice and wheat.[20] While other recent studies claim that India can easily feed its growing population, plus produce wheat and rice for global exports, if it can reduce food staple spoilage/wastage, improve its infrastructure and raise its farm productivity like those achieved by other developing countries such as Brazil and China.

Data collected from Ministry of Agriculture and Farmers Welfare of India

Explore gender statistics data focusing on academic staff, employment, fertility rates, GDP, poverty, and more in the GCC region. Access comprehensive information on key indicators for Bahrain, China, India, Kuwait, Oman, Qatar, and Saudi Arabia.

academic staff, Access to anti-retroviral drugs, Adjusted net enrollment rate, Administration and Law programmes, Age at first marriage, Age dependency ratio, Cause of death, Children out of school, Completeness of birth registration, consumer prices, Cost of business start-up procedures, Employers, Employment in agriculture, Employment in industry, Employment in services, employment or training, Engineering and Mathematics programmes, Female headed households, Female migrants, Fertility planning status: mistimed pregnancy, Fertility planning status: planned pregnancy, Fertility rate, Firms with female participation in ownership, Fisheries and Veterinary programmes, Forestry, GDP, GDP growth, GDP per capita, gender parity index, Gini index, GNI, GNI per capita, Government expenditure on education, Government expenditure per student, Gross graduation ratio, Households with water on the premises, Inflation, Informal employment, Labor force, Labor force with advanced education, Labor force with basic education, Labor force with intermediate education, Learning poverty, Length of paid maternity leave, Life expectancy at birth, Mandatory retirement age, Manufacturing and Construction programmes, Mathematics and Statistics programmes, Number of under-five deaths, Part time employment, Population, Poverty headcount ratio at national poverty lines, PPP, Primary completion rate, Retirement age with full benefits, Retirement age with partial benefits, Rural population, Sex ratio at birth, Unemployment, Unemployment with advanced education, Urban population

Bahrain, China, India, Kuwait, Oman, Qatar, Saudi Arabia

Follow data.kapsarc.org for timely data to advance energy economics research.

Explore the dataset on midyear population statistics for 2015, including data on non-infectious diseases, infectious diseases, accidents, malnutrition, congenital diseases, and more. Gain insights on population health trends globally.

Non-infectious, Midyear population, Annual, Infectious disease, Accident/Trauma, Malnutrition, Congenital disease, Other (including ageing), Disease, Health, Population

China, Germany, India, Japan, Russia, United States Follow data.kapsarc.org for timely data to advance energy economics research.

Abstract

Purpose: The multi-country Study on Global Ageing and Adult Health (SAGE) is run by the World Health Organization's Multi-Country Studies unit in the Innovation, Information, Evidence and Research Cluster. SAGE is part of the unit's Longitudinal Study Programme which is compiling longitudinal data on the health and well-being of adult populations, and the ageing process, through primary data collection and secondary data analysis. SAGE baseline data (Wave 0, 2002/3) was collected as part of WHO's World Health Survey http://www.who.int/healthinfo/survey/en/index.html (WHS). SAGE Wave 1 (2007/10) provides a comprehensive data set on the health and well-being of adults in six low and middle-income countries: China, Ghana, India, Mexico, Russian Federation and South Africa. Objectives: To obtain reliable, valid and comparable health, health-related and well-being data over a range of key domains for adult and older adult populations in nationally representative samples To examine patterns and dynamics of age-related changes in health and well-being using longitudinal follow-up of a cohort as they age, and to investigate socio-economic consequences of these health changes To supplement and cross-validate self-reported measures of health and the anchoring vignette approach to improving comparability of self-reported measures, through measured performance tests for selected health domains To collect health examination and biomarker data that improves reliability of morbidity and risk factor data and to objectively monitor the effect of interventions

Additional Objectives: To generate large cohorts of older adult populations and comparison cohorts of younger populations for following-up intermediate outcomes, monitoring trends, examining transitions and life events, and addressing relationships between determinants and health, well-being and health-related outcomes To develop a mechanism to link survey data to demographic surveillance site data To build linkages with other national and multi-country ageing studies To improve the methodologies to enhance the reliability and validity of health outcomes and determinants data To provide a public-access information base to engage all stakeholders, including national policy makers and health systems planners, in planning and decision-making processes about the health and well-being of older adults

Methods: SAGE's first full round of data collection included both follow-up and new respondents in most participating countries. The goal of the sampling design was to obtain a nationally representative cohort of persons aged 50 years and older, with a smaller cohort of persons aged 18 to 49 for comparison purposes. In the older households, all persons aged 50+ years (for example, spouses and siblings) were invited to participate. Proxy respondents were identified for respondents who were unable to respond for themselves. Standardized SAGE survey instruments were used in all countries consisting of five main parts: 1) household questionnaire; 2) individual questionnaire; 3) proxy questionnaire; 4) verbal autopsy questionnaire; and, 5) appendices including showcards. A VAQ was completed for deaths in the household over the last 24 months. The procedures for including country-specific adaptations to the standardized questionnaire and translations into local languages from English follow those developed by and used for the World Health Survey.

Content Household questionnaire 0000 Coversheet 0100 Sampling Information 0200 Geocoding and GPS Information 0300 Recontact Information 0350 Contact Record 0400 Household Roster 0450 Kish Tables and Household Consent 0500 Housing 0600 Household and Family Support Networks and Transfers 0700 Assets and Household Income 0800 Household Expenditures 0900 Interviewer Observations

Individual questionnaire 1000 Socio-Demographic Characteristics 1500 Work History and Benefits 2000 Health State Descriptions and Vignettes 2500 Anthropometrics, Performance Tests and Biomarkers 3000 Risk Factors and Preventive Health Behaviours 4000 Chronic Conditions and Health Services Coverage 5000 Health Care Utilization 6000 Social Cohesion 7000 Subjective Well-Being and Quality of Life (WHOQoL-8 and Day Reconstruction Method) 8000 Impact of Caregiving 9000 Interviewer Assessment

Geographic coverage

National coverage

Analysis unit

households and individuals

Universe

The household section of the survey covered all households in 19 of the 28 states in India which covers 96% of the population. Institutionalised populations are excluded. The individual section covered all persons aged 18 years and older residing within individual households.

Kind of data

Sample survey data [ssd]

Sampling procedure

World Health Survey Sampling India has 28 states and seven union territories. 19 of the 28 states were included in the design representing 96% of the population. India used a stratified multistage cluster sample design. Six states were selected in accordance with their geographic location and level of development. Strata were defined by the 6 states:(Assam, Karnataka, Maharashtra, Rajasthan, Uttar Pradesh and West Bengal), and locality (urban or rural). There are 12 strata in total. The 2000 Census demarcation was used as the sampling frame. Two stage and three stage sampling was adopted in rural and urban areas, respectively. In rural areas PSUs(villages) were selected probability proportional to size. The measure of size being the 2001 Census population in the village. SSUs (households) were selected using systematic sampling. TSUs (individuals) were selected using Kish tables. In urban areas, PSUs(city wards) were selected probability proportional to size. SSUs(census enumeration blocks), two were randomly selected from each PSU. TSU (households) were selected using systematic sampling. QSU (individuals) were selected as in rural areas. A sample of 379 EAs was selected as the primary sampling units(PSU).

SAGE Sampling The SAGE sample was pre-determined as all PSUs and households selected for the WHS/SAGE Wave 0 survey were included. Exceptions are three PSUs in Assam which were replaced as they were inaccessible due to flooding. And a further six PSUs were omitted for which the household roster information was not available. In each selected EA, a listing of the households was conducted to classify each household into the following mutually exclusive categories: 1)Households with a WHS/SAGE Wave 0 respondent aged 50-plus: all members aged 50-plus including the WHS/SAGE Wave 0 respondent were eligible for the individual interview. 2)Households with a WHS/SAGE Wave 0 respondent aged 47-49: all members aged 50-plus including the WHS/SAGE Wave 0 respondent aged 47-49 was eligible for the individual interview. 3)Households with a WHS/SAGE Wave 0 female respondent aged 18-46: all females members aged 18-49 including the WHS/SAGE Wave 0 female respondent aged 18-46 were eligible for the individual interview. 4)Households with a WHS/SAGE Wave 0 male respondent aged 18-46: three households were selected using systematic sampling and one male aged 18-49 was eligible for the individual interview. In the households not selected, all members aged 50-plus were eligible for the individual interview.

Stages of selection Strata: State, Locality=12 PSU: EAs=375 surveyed SSU: Households=10424 surveyed TSU: Individual=12198 surveyed

Mode of data collection

Face-to-face [f2f] PAPI

Research instrument

The questionnaires were based on the WHS Model Questionnaire with some modification and many new additions. A household questionnaire was administered to all households eligible for the study. A Verbal Autopsy questionnaire was administered to households that had a death in the last 24 months. An Individual questionniare was administered to eligible respondents identified from the household roster. A Proxy questionnaire was administered to individual respondents who had cognitive limitations. A Womans Questionnaire was administered to all females aged 18-49 years identified from the household roster. The questionnaires were developed in English and were piloted as part of the SAGE pretest in 2005. All documents were translated into Hindi, Assamese, Kanada and Marathi. SAGE generic questionnaires are available as external resources.

Cleaning operations

Data editing took place at a number of stages including: (1) office editing and coding (2) during data entry (3) structural checking of the CSPro files (4) range and consistency secondary edits in Stata

Response rate

Household Response rate=88% Cooperation rate=92%

Individual: Response rate=68% Cooperation rate=92%

its population is characterized as Brazilian, Chinese, and Indian companies that presented financial information to external users through securities markets’ regulatory agencies in Brazil, China, and India and that implemented CDM projects during the 2005–2012 period, ranking in the “registered” status on the UNFCCC website.

Quantitative data were obtaining to test the statistical hypothesis proposed in the study from information referring to the companies and CDM projects that made up the sample as follows: (i) the financial information referring to the equity (E) of companies that have their shares listed in the capital markets of Brazil, China, and India; and (ii) the emission reduction estimates of CDM projects, available from the UNFCCC website.

The data collection, referring to the financial information of the companies that have made themselves available via regulatory bodies in the securities markets of the countries under study, was carried out through Thomson Reuters Eikon’s Electronic and Financial Database on July 30, 2013. Thus, when the data collection was carried out, financial information was obtained and converted into euros, referring to the equity (E) of 380 Brazilian companies, 2,584 Chinese companies, and 4,219 Indian companies, for the period under review.

The collection of data concerning CDM projects with the status “registered” on the UNFCCC site, on the other hand, was carried out using the Bloomberg Economic and Financial Database on July 29, 2013, at which time a total of 289 projects registered by the Brazilian DNA, 3,651 projects registered by the Chinese DNA, and 1,296 projects registered by the Indian DNA were available for analysis for the 2005–2012 period. On November 18, 2004, just one project was registered by the Brazilian DNA, entitled “Brazil NovaGerar Landfill Gas to Energy Project” (UNFCCC, 2014). This project was eliminated from the research because of its set limits defined between 2005 and 2012, the first stage of the Kyoto Protocol.

However, it was necessary to carry out new searches directly on the UNFCCC site for supplementary information that was crucial to implementing the research, given the fact that it did not include full descriptions concerning the names of the receiving agencies in each country (host party), in the Bloomberg Economic and Financial database, on the date mentioned above, information that was characterized as the only link between the CDM project database (Bloomberg) and the financial information database (Thomson Reuters Eikon). These searches were carried during the October 2013–May 2014 period.

Subsequently, on September 1, 2014, new searches were carried out on the UNFCCC website to update the information referring to CDM projects registered by the agency during the 2005–2012 period.

Thus, this research was carried out based on CDM projects located in the “registered” status section of the UNFCCC site over the 2005–2012 period, the records of which were finalized by the body prior to September 1, 2014, containing 299 projects registered by the DNA of Brazil, 3,682 projects registered by the DNA of China, and 1,371 projects registered by the DNA of India, adding up to 5,353 projects, that is, 74.69% of the total implemented projects in all the developing countries that ratified the Kyoto Protocol.

To allow the measurement to be applied to the fair value of estimates of project emission reduction approved by the companies that make up the research sample, we obtained the interest rate EURIBOR – Euro Interbank Offered Rate (average annual rates) from the Bloomberg Financial and Economic Database on July 29, 2013 to adjust the future flows of economic benefits of CER estimates to the present value.

Abstract (en): The Research on Early Life and Aging Trends and Effects (RELATE) study compiles cross-national data that contain information that can be used to examine the effects of early life conditions on older adult health conditions, including heart disease, diabetes, obesity, functionality, mortality, and self-reported health. The complete cross sectional/longitudinal dataset (n=147,278) was compiled from major studies of older adults or households across the world that in most instances are representative of the older adult population either nationally, in major urban centers, or in provinces. It includes over 180 variables with information on demographic and geographic variables along with information about early life conditions and life course events for older adults in low, middle and high income countries. Selected variables were harmonized to facilitate cross national comparisons. In this first public release of the RELATE data, a subset of the data (n=88,273) is being released. The subset includes harmonized data of older adults from the following regions of the world: Africa (Ghana and South Africa), Asia (China, India), Latin America (Costa Rica, major cities in Latin America), and the United States (Puerto Rico, Wisconsin). This first release of the data collection is composed of 19 downloadable parts: Part 1 includes the harmonized cross-national RELATE dataset, which harmonizes data from parts 2 through 19. Specifically, parts 2 through 19 include data from Costa Rica (Part 2), Puerto Rico (Part 3), the United States (Wisconsin) (Part 4), Argentina (Part 5), Barbados (Part 6), Brazil (Part 7), Chile (Part 8), Cuba (Part 9), Mexico (Parts 10 and 15), Uruguay (Part 11), China (Parts 12, 18, and 19), Ghana (Part 13), India (Part 14), Russia (Part 16), and South Africa (Part 17). The Health and Retirement Study (HRS) was also used in the compilation of the larger RELATE data set (HRS) (N=12,527), and these data are now available for public release on the HRS data products page. To access the HRS data that are part of the RELATE data set, please see the collection notes below. The purpose of this study was to compile and harmonize cross-national data from both the developing and developed world to allow for the examination of how early life conditions are related to older adult health and well being. The selection of countries for this study was based on their diversity but also on the availability of comprehensive cross sectional/panel survey data for older adults born in the early to mid 20th century in low, middle and high income countries. These data were then utilized to create the harmonized cross-national RELATE data (Part 1). Specifically, data that are being released in this version of the RELATE study come from the following studies: CHNS (China Health and Nutrition Study) CLHLS (Chinese Longitudinal Healthy Longevity Survey) CRELES (Costa Rican Study of Longevity and Healthy Aging) PREHCO (Puerto Rican Elderly: Health Conditions) SABE (Study of Aging Survey on Health and Well Being of Elders) SAGE (WHO Study on Global Ageing and Adult Health) WLS (Wisconsin Longitudinal Study) Note that the countries selected represent a diverse range in national income levels: Barbados and the United States (including Puerto Rico) represent high income countries; Argentina, Cuba, Uruguay, Chile, Costa Rica, Brazil, Mexico, and Russia represent upper middle income countries; China and India represent lower middle income countries; and Ghana represents a low income country. Users should refer to the technical report that accompanies the RELATE data for more detailed information regarding the study design of the surveys used in the construction of the cross-national data. The Research on Early Life and Aging Trends and Effects (RELATE) data includes an array of variables, including basic demographic variables (age, gender, education), variables relating to early life conditions (height, knee height, rural/urban birthplace, childhood health, childhood socioeconomic status), adult socioeconomic status (income, wealth), adult lifestyle (smoking, drinking, exercising, diet), and health outcomes (self-reported health, chronic conditions, difficulty with functionality, obesity, mortality). Not all countries have the same variables. Please refer to the technical report that is part of the documentation for more detail regarding the variables available across countries. Sample weights are applicable to all countries exc...