Chart and table of population level and growth rate for the state of New Jersey from 1900 to 2024.

This graph shows the population density in the federal state of New Jersey from 1960 to 2018. In 2018, the population density of New Jersey stood at 1,211.3 residents per square mile of land area.

This resource is a member of a series. The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2020 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

Resident Population in New Jersey was 9500.85100 Thous. of Persons in January of 2024, according to the United States Federal Reserve. Historically, Resident Population in New Jersey reached a record high of 9500.85100 in January of 2024 and a record low of 1884.00000 in January of 1900. Trading Economics provides the current actual value, an historical data chart and related indicators for Resident Population in New Jersey - last updated from the United States Federal Reserve on July of 2025.

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. The TIGER/Line shapefiles include both incorporated places (legal entities) and census designated places or CDPs (statistical entities). An incorporated place is established to provide governmental functions for a concentration of people as opposed to a minor civil division (MCD), which generally is created to provide services or administer an area without regard, necessarily, to population. Places always nest within a state, but may extend across county and county subdivision boundaries. An incorporated place usually is a city, town, village, or borough, but can have other legal descriptions. CDPs are delineated for the decennial census as the statistical counterparts of incorporated places. CDPs are delineated to provide data for settled concentrations of population that are identifiable by name, but are not legally incorporated under the laws of the state in which they are located. The boundaries for CDPs often are defined in partnership with state, local, and/or tribal officials and usually coincide with visible features or the boundary of an adjacent incorporated place or another legal entity. CDP boundaries often change from one decennial census to the next with changes in the settlement pattern and development; a CDP with the same name as in an earlier census does not necessarily have the same boundary. The only population/housing size requirement for CDPs is that they must contain some housing and population. The boundaries of most incorporated places in this shapefile are as of January 1, 2018, as reported through the Census Bureau's Boundary and Annexation Survey (BAS). The boundaries of all CDPs were delineated as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2010 Census.

U.S. Census Bureau QuickFacts statistics for Lyndhurst township, Bergen County, New Jersey. QuickFacts data are derived from: Population Estimates, American Community Survey, Census of Population and Housing, Current Population Survey, Small Area Health Insurance Estimates, Small Area Income and Poverty Estimates, State and County Housing Unit Estimates, County Business Patterns, Nonemployer Statistics, Economic Census, Survey of Business Owners, Building Permits.

U.S. Census Bureau QuickFacts statistics for Sparta township, Sussex County, New Jersey. QuickFacts data are derived from: Population Estimates, American Community Survey, Census of Population and Housing, Current Population Survey, Small Area Health Insurance Estimates, Small Area Income and Poverty Estimates, State and County Housing Unit Estimates, County Business Patterns, Nonemployer Statistics, Economic Census, Survey of Business Owners, Building Permits.

The New Jersey Department of Community Affairs' "New Jersey Community Asset Map" is an interactive mapping tool that allows users to view community assets, amenities, and special designations throughout New Jersey. It also contains relevant economic, housing, and demographic information for each municipality. It is intended to help users gain a better understanding of the characteristics and amenities of New Jersey’s 564 municipalities and to identify appropriate types of investment and development to spur economic revitalization.

NJDOT has revised the New Jersey urban area based upon the 2010 U.S. Census urban area boundaries. The U.S. Census defines an Urban Area as any area with a population >= 2,500. Under the Urban Area definition, Urban Clusters contain a population of 2,500-49,999 and Urbanized Areas are >= 50,000. FHWA, however, has slightly different criteria for what defines an urban area. Under FHWA, an Urban Area is >= 5,000, with Small Urban Areas 5,000-49,999 and Urbanized Areas >= 50,000. NJDOT followed the FHWA urban area definitions for this urban area update. To perform this update, NJDOT first combined the 2000 NJDOT urban area with the 2010 US Census urban areas greater than 5,000 in population. Since census urban area boundaries are based upon census block boundaries, which can be irregular, NJDOT extended outward the urban area ("smoothed") to the nearest road, stream, political boundary, or manmade feature using the 2012 NJ orthophotos as a base map. Where there was no obvious boundary to smooth to, the census boundary was retained. NJDOT also expanded the urban area to include any densely developed areas not included in the 2000 NJDOT urban area or 2010 Census urban areas.The urban area update underwent a thorough public review and comment period. Representatives from NJDOT, all 21 counties, and the 3 metropolitan planning organizations (NJTPA, SJTPO, and DVRPC) met during various phases of the project to review the updated urban area. All comments were logged into an Urban Area Comment Tracking Form, and an official NJDOT response was provided for each comment.In 2017, minor revisions were made to the urban area based upon comments from FHWA. These revisions were limited in scope and consisted of the following: 1) Adjusted boundary breaks within the urban area so that each Census urban area was only within one NJDOT urban area. 2) Delineated the Poughkeepsie--Newburgh, Mystic Island, and Newton urban areas within the NJDOT urban area. 3) Removed the Belvidere, Milford, and Maurice River urban areas. 4) Merged Upper Greenwood Lake urban area with Poughkeepsie urban area; merged Laurel Lake urban area with Vineland urban area; and merged Woodstown urban area with Philadelphia urban area. 5) Added small portions of the Census urban area (previously omitted from the NJDOT urban area due to smoothing), to the NJDOT urban area to ensure all Census urban areas with a population > 5,000 within the official NJ state boundary were included.

482,10 (persons per sq. km) in 2022.

U.S. Census Bureau QuickFacts statistics for Twin Rivers CDP, New Jersey. QuickFacts data are derived from: Population Estimates, American Community Survey, Census of Population and Housing, Current Population Survey, Small Area Health Insurance Estimates, Small Area Income and Poverty Estimates, State and County Housing Unit Estimates, County Business Patterns, Nonemployer Statistics, Economic Census, Survey of Business Owners, Building Permits.

U.S. Census Bureau QuickFacts statistics for Lake Mohawk CDP, New Jersey. QuickFacts data are derived from: Population Estimates, American Community Survey, Census of Population and Housing, Current Population Survey, Small Area Health Insurance Estimates, Small Area Income and Poverty Estimates, State and County Housing Unit Estimates, County Business Patterns, Nonemployer Statistics, Economic Census, Survey of Business Owners, Building Permits.

Local Aid Equity

U.S. Census Bureau QuickFacts statistics for Phillipsburg town, Warren County, New Jersey. QuickFacts data are derived from: Population Estimates, American Community Survey, Census of Population and Housing, Current Population Survey, Small Area Health Insurance Estimates, Small Area Income and Poverty Estimates, State and County Housing Unit Estimates, County Business Patterns, Nonemployer Statistics, Economic Census, Survey of Business Owners, Building Permits.

NJDOT has revised the New Jersey urban area based upon the 2010 U.S. Census urban area boundaries. The U.S. Census defines an Urban Area as any area with a population >= 2,500. Under the Urban Area definition, Urban Clusters contain a population of 2,500-49,999 and Urbanized Areas are >= 50,000. FHWA, however, has slightly different criteria for what defines an urban area. Under FHWA, an Urban Area is >= 5,000, with Small Urban Areas 5,000-49,999 and Urbanized Areas >= 50,000. NJDOT followed the FHWA urban area definitions for this urban area update. To perform this update, NJDOT first combined the 2000 NJDOT urban area with the 2010 US Census urban areas greater than 5,000 in population. Since census urban area boundaries are based upon census block boundaries, which can be irregular, NJDOT extended outward the urban area ("smoothed") to the nearest road, stream, political boundary, or manmade feature using the 2012 NJ orthophotos as a base map. Where there was no obvious boundary to smooth to, the census boundary was retained. NJDOT also expanded the urban area to include any densely developed areas not included in the 2000 NJDOT urban area or 2010 Census urban areas.The urban area update underwent a thorough public review and comment period. Representatives from NJDOT, all 21 counties, and the 3 metropolitan planning organizations (NJTPA, SJTPO, and DVRPC) met during various phases of the project to review the updated urban area. All comments were logged into an Urban Area Comment Tracking Form, and an official NJDOT response was provided for each comment.In 2017, minor revisions were made to the urban area based upon comments from FHWA. These revisions were limited in scope and consisted of the following: 1) Adjusted boundary breaks within the urban area so that each Census urban area was only within one NJDOT urban area. 2) Delineated the Poughkeepsie--Newburgh, Mystic Island, and Newton urban areas within the NJDOT urban area. 3) Removed the Belvidere, Milford, and Maurice River urban areas. 4) Merged Upper Greenwood Lake urban area with Poughkeepsie urban area; merged Laurel Lake urban area with Vineland urban area; and merged Woodstown urban area with Philadelphia urban area. 5) Added small portions of the Census urban area (previously omitted from the NJDOT urban area due to smoothing), to the NJDOT urban area to ensure all Census urban areas with a population > 5,000 within the official NJ state boundary were included.

U.S. Census Bureau QuickFacts statistics for Red Bank borough, New Jersey. QuickFacts data are derived from: Population Estimates, American Community Survey, Census of Population and Housing, Current Population Survey, Small Area Health Insurance Estimates, Small Area Income and Poverty Estimates, State and County Housing Unit Estimates, County Business Patterns, Nonemployer Statistics, Economic Census, Survey of Business Owners, Building Permits.

U.S. Census Bureau QuickFacts statistics for Berkeley township, Ocean County, New Jersey. QuickFacts data are derived from: Population Estimates, American Community Survey, Census of Population and Housing, Current Population Survey, Small Area Health Insurance Estimates, Small Area Income and Poverty Estimates, State and County Housing Unit Estimates, County Business Patterns, Nonemployer Statistics, Economic Census, Survey of Business Owners, Building Permits.

This data is a 1000 ft buffer around roads with traffic greater than 25,000 vehicles according to the federal highway performance monitoring system (HPMS) in 2018. The childcares, schools, and estimated population within these buffers are counted in respective fields. Estimated population was completed using NJDEP land use/land cover data and U.S. Census dicennial survey data.

U.S. Census Bureau QuickFacts statistics for Succasunna CDP, New Jersey. QuickFacts data are derived from: Population Estimates, American Community Survey, Census of Population and Housing, Current Population Survey, Small Area Health Insurance Estimates, Small Area Income and Poverty Estimates, State and County Housing Unit Estimates, County Business Patterns, Nonemployer Statistics, Economic Census, Survey of Business Owners, Building Permits.

U.S. Census Bureau QuickFacts statistics for Greentree CDP, New Jersey. QuickFacts data are derived from: Population Estimates, American Community Survey, Census of Population and Housing, Current Population Survey, Small Area Health Insurance Estimates, Small Area Income and Poverty Estimates, State and County Housing Unit Estimates, County Business Patterns, Nonemployer Statistics, Economic Census, Survey of Business Owners, Building Permits.