Please note, we recommend using the new Map Viewer in ArcGIS Online. There is an issue in Map Viewer Classic with the display of grid cell values. The clickable area of each cell is shifted to the northwest. This can result in neighbouring pixel values being displayed. The underlying data is correct, and the values display correctly in the new Map Viewer and in ArcGIS Pro. The Australian population grid 2022 is a modelled 1 km x 1 km grid representation of the estimated resident population (ERP) of Australia from 30 June 2022. The population grid is created by reaggregating estimated resident population data from Statistical Areas Level 1 (SA1) to a 1 km x 1 km grid across Australia based on point data representing residential address points. The value of each grid cell represents the estimated population density (number of people per square kilometre) within each 1 km x 1 km grid cell.

SA1 boundaries are defined by the Australian Statistical Geography Standard (ASGS) Edition 3 (2021) and the 1 km x 1 km grid is based on the National Nested Grid.

Data considerations Caution must be taken when using the population grid as it presents modelled data only; it is not an exact measure of population across Australia. Contact the Australian Bureau of Statistics (ABS) If you have questions, feedback or would like to receive updates about this web service, please email geography@abs.gov.au. For information about how the ABS manages any personal information you provide view the ABS privacy policy.

Data and geography references Source data publication: Regional population, 2022 Additional data input: ABS Address Register Geographic boundary information: Australian Statistical Geography Standard (ASGS) Edition 3, National Nested Grid Further information: Regional population methodology Source: Australian Bureau of Statistics (ABS)

The Australian population grid 2024 was created using 2024 Estimated Resident Population (ERP) by Statistical Area Level 1 2021 (SA1) data. This data was modelled to 1 kilometre square grid cells to represent the population density of Australia (people per square kilometre). This is modelled data and should be used and interpreted with caution.SA1s are defined by the Australian Statistical Geography Standard (ASGS) Edition 3 2021. The grid was constructed using the National Nested Grid Standard.Processing steps:A subset of the ABS Address Register (AR) was created to represent residential addresses as closely as possible. Indigenous Community Points (ICP) were included where no AR point existed. SA1 centroid points were included where no AR or ICP point existed within an SA1. All these layers were combined into a single point layer (Allpoints).The Allpoints layer was overlaid with the SA1 boundaries to give every point an SA1 code. Points without an SA1 code (outside all SA1 regions) were dropped.ERP by SA1 was averaged across all points within each SA1. Points were converted to raster using the National Nested Grid as template. Point population values which fell within each raster cell were summed.Data and geography referencesMain source data publication: Regional population, 2023–24 financial yearGeographic boundary information: Australian Statistical Geography Standard (ASGS) Edition 3Further information: Regional population methodologySource: Australian Bureau of Statistics (ABS)Contact the Australian Bureau of StatisticsEmail geography@abs.gov.au if you have any questions or feedback about this web service.Subscribe to get updates on ABS web services and geospatial products.Privacy at the Australian Bureau of StatisticsRead how the ABS manages personal information - ABS privacy policy.

The world's most accurate population datasets. Seven maps/datasets for the distribution of various populations in Australia: (1) Overall population density (2) Women (3) Men (4) Children (ages 0-5) (5) Youth (ages 15-24) (6) Elderly (ages 60+) (7) Women of reproductive age (ages 15-49).

Author: Joseph Kerski, post_secondary_educator, Esri and University of DenverGrade/Audience: high school, ap human geography, post secondary, professional developmentResource type: lessonSubject topic(s): population, maps, citiesRegion: africa, asia, australia oceania, europe, north america, south america, united states, worldStandards: All APHG population tenets. Geography for Life cultural and population geography standards. Objectives: 1. Understand how population change and demographic characteristics are evident at a variety of scales in a variety of places around the world. 2. Understand the whys of where through analysis of change over space and time. 3. Develop skills using spatial data and interactive maps. 4. Understand how population data is communicated using 2D and 3D maps, visualizations, and symbology. Summary: Teaching and learning about demographics and population change in an effective, engaging manner is enriched and enlivened through the use of web mapping tools and spatial data. These tools, enabled by the advent of cloud-based geographic information systems (GIS) technology, bring problem solving, critical thinking, and spatial analysis to every classroom instructor and student (Kerski 2003; Jo, Hong, and Verma 2016).

The Australian Population Grid 2022 was created using estimated residential population (ERP) data for Statistical Areas Level 1 (SA1). The SA1 level ERP data was then modelled down to a 1km x 1km grid across geographic Australia using various point layers that represent population. The value of each grid cell represents the population density (number of people per square kilometre) in that 1km x 1km cell. This is modelled data and caution must be used in its interpretation, as the population has NOT been measured at the 1km cell level. SA1s are defined by the Australian Statistical Geography Standard (ASGS) Edition 3 (2021) and the grid used is based on the National Nested Grid Standard.Data and geography notes: Source data publication: Regional population, 2022Geographic boundary information: Statistical Areas Level 1 (SA1) - Australian Statistical Geography Standard (ASGS) Edition 3, National Nested Grid StandardAdditional data inputs: ABS Address Register, Indigenous Community Points (ICP)Further information: Regional population methodologySource: Australian Bureau of Statistics (ABS) www.abs.gov.auProcessing step:1) A subset of the Address Register that represented residential addresses as closely as possible was made. ICP points were included where no AR point existed.SA1 centroid points were included where no AR or ICP point existed within an SA1. All these layers were combined into a single point layer (Allpoints). 2) The Allpoints layer was overlaid with the ASGS 2021 SA1 boundaries to give every point an SA1 code. Points without an SA1 code (outside all SA1 regions) were dropped. 3) Estimated Resident Population by SA1 (ERP) was averaged across all points within each SA1. 4) Points were converted to raster, using the National Nested grid as template. Point population values falling within each raster cell were summed.

Census data reveals that population density varies noticeably from area to area. Small area census data do a better job depicting where the crowded neighborhoods are. In this map, the yellow areas of highest density range from 30,000 to 150,000 persons per square kilometer. In those areas, if the people were spread out evenly across the area, there would be just 4 to 9 meters between them. Very high density areas exceed 7,000 persons per square kilometer. High density areas exceed 5,200 persons per square kilometer. The last categories break at 3,330 persons per square kilometer, and 1,500 persons per square kilometer.This dataset is comprised of multiple sources. All of the demographic data are from Michael Bauer Research with the exception of the following countries:Australia: Esri Australia and MapData ServicesCanada: Esri Canada and EnvironicsFrance: Esri FranceGermany: Esri Germany and NexigaIndia: Esri India and IndicusJapan: Esri JapanSouth Korea: Esri Korea and OPENmateSpain: Esri España and AISUnited States: Esri Demographics

The population of the world, allocated to 1 arcsecond blocks. This refines CIESIN’s Gridded Population of the World project, using machine learning models on high-resolution worldwide Digital Globe satellite imagery.

Census data reveals that population density varies noticeably from area to area. Small area census data do a better job depicting where the crowded neighborhoods are. In this map, the yellow areas of highest density range from 30,000 to 150,000 persons per square kilometer. In those areas, if the people were spread out evenly across the area, there would be just 4 to 9 meters between them. Very high density areas exceed 7,000 persons per square kilometer. High density areas exceed 5,200 persons per square kilometer. The last categories break at 3,330 persons per square kilometer, and 1,500 persons per square kilometer.This dataset is comprised of multiple sources. All of the demographic data are from Michael Bauer Research with the exception of the following countries:Australia: Esri Australia and MapData ServicesCanada: Esri Canada and EnvironicsFrance: Esri FranceGermany: Esri Germany and NexigaIndia: Esri India and IndicusJapan: Esri JapanSouth Korea: Esri Korea and OPENmateSpain: Esri España and AISUnited States: Esri Demographics

Official population projections for: • South Australia and regions for 2016 to 2041 • Local government areas (LGAs) and Statistical Areas level 2 (SA2s) for 2016 to 2036. Users should familiarise themselves with the assumptions, qualifications and background information provided on the DPTI population projections webpage at http://www.dpti.sa.gov.au/planning/population in order to choose the projection that best suits their needs. Updated every 5 years.

This map is based on information from the 1966 census, and shows distribution and numbers of population in N.S.W. and the A.C.T. The map was printed by the Commonwealth Government Printer.

The scale is approx. 30 miles = 1 inch.


(SR Map No.52714). 1 map.

Note:
This description is extracted from Concise Guide to the State Archives of New South Wales, 3rd Edition 2000.

This web maps looks at the breakdown of who is renting, who is paying off the mortgage, and who owns their place outright. Using data from ABS Census 2021 General Community Profile release. This map shows the percentage of the population that is married. Data is available for Country, Greater Capital City Statistical Area (GCCSA), Local Government Area (LGA), Statistical Area Level 1 (SA1) and 2 (SA2), and State Suburb (SSC) boundaries.This map contains layers that contain some of the more commonly used variables from the General Community Profile information from the Australian Bureau of Statistics 2021 census. Data is available for Country, Greater Capital City Statistical Area (GCCSA), Local Government Area (LGA), Statistical Area Level 1 (SA1) and 2 (SA2), and Suburb and Localities (SAL) boundaries.The General Community Profile contains a series of tables showing the characteristics of persons, families and dwellings in a selected geographic area. The data is based on place of usual residence (that is, where people usually live, rather than where they were counted on Census night). Community Profiles are excellent tools for researching, planning and analysing geographic areas for a number of social, economic and demographic characteristics.Download the data here.Data and Geography notes:View the Readme files located in the DataPacks and GeoPackages zip files.To access the 2021 DataPacks, visit https://www.abs.gov.au/census/find-census-data/datapacksGlossary terms and definitions of classifications can be found in the 2021 Census DictionaryMore information about Census data products is available at https://www.abs.gov.au/census/guide-census-data/about-census-tools/datapacksDetailed geography information: https://www.abs.gov.au/statistics/standards/australian-statistical-geography-standard-asgs-edition-3/jul2021-jun2026/main-structure-and-greater-capital-city-statistical-areas: 2021 Statistical Area Level 1 (SA1), 2021 Statistical Area Level 2 (SA2), 2021 Greater Capital City Statistical Areas (GCCSA), 2021 Australia (AUS)https://www.abs.gov.au/statistics/standards/australian-statistical-geography-standard-asgs-edition-3/jul2021-jun2026/non-abs-structures: 2021 Suburbs and Localities (SAL), 2021 Local Government Areas (LGA)Please note that there are data assumptions that should be considered when analysing the ABS Census data. These are detailed within the Census documents referenced above. These include:Registered Marital StatusIn December 2017, amendments to the Marriage Act 1961 came into effect enabling marriage equality for all couples. For 2021, registered marriages include all couples.Core Activity Need for AssistanceMeasures the number of people with a profound or severe core activity limitation. People with a profound or severe core activity limitation are those needing assistance in their day to day lives in one or more of the three core activity areas of self-care, mobility and communication because of a long-term health condition (lasting six months or more), a disability (lasting six months or more), or old age. Number of Motor VehiclesExcludes motorbikes, motor scooters and heavy vehicles.Please note that there are small random adjustments made to all cell values to protect the confidentiality of data. These adjustments may cause the sum of rows or columns to differ by small amounts from table totals.Source: Australian Bureau of Statistics

Changelog Version 1.0.0 (2025-07-05)

ArcGIS Instant App (Atlas) created with the following:

Population distribution by Statistical Area Level 2 webmapBasemap widget showcasing the Basemap Gallery

 Configured to open on the Topographic Basemap

Map layer widget, configured to open on the initial App load

 Show title 
 Toggle on/off
 Zoom to layer
 Show legend
 Adjust transparency 
 Swipe layer on/off
 Open data table
 Layer information
 Remove layer

Legend widget

 Will showcase the legend of visible layers 

Measurement widget

 Linear measurement 
 Area measurement 
 Find coordinates
 Elevation profiles 

Sketch widget used to add the drawing as an operational layer of the map

 Points 
 Lines 
 Polygons 
 Shapes 
 Symbols 
 Text
 Colours 

Save widget

 Export to PDF 
 Screenshot

Darker shades indicate areas with higher population density, while lighter shades represent more sparsely populated zones. This combination of labeling and color coding provides an intuitive and informative view of how Wodonga's population is distributed geographically.

This map shows population and land use in Sydney and the County of Cumberland. It was prepared by the Department of Main Roads.

The scale is 1 mile = 1 inch. The map is in two parts.


(SR Map Nos.52693-94). 2 sheets.

Note:
This description is extracted from Concise Guide to the State Archives of New South Wales, 3rd Edition 2000.

Key FeaturesArcGIS Instant App (Atlas) created using the Population distribution by local government area webmap and the following widgets:BasemapMap LayerLegendMeasurementSketchSaveModification As needed, please refer to map for currency of data layers. Contact Digital Atlas of Australia

The City of Port Adelaide Enfield Community Profile provides demographic and economic analysis for the Council area and its suburbs based on results from the 2016, 2011, 2006, 2001, 1996 and 1991 Censuses of Population and Housing. The profile is updated with population estimates when the Australian Bureau of Statistics (ABS) releases new figures. This is an interactive query tool where results can be downloaded in various formats. Three reporting types are available from this resource: 1. Social atlas that delivers the data displayed on a map showing each SA1 area (approx 200 households), 2. Community Profile which delivers data at a District level which contain 2 to 3 suburbs, and 3. Economic Profile which reports statistics of an economic indicators. The general community profile/social atlas themes available for reporting on are: -Age -Education -Ethnicity -Disability -Employment/Income -Household types -Indigenous profile -Migration -Journey to work -Disadvantage -Population Estimates -Building approvals. It also possible to navigate to the Community Profiles of some other Councils as well.

This map shows the percentage of the population that is married. Data is available for Country, Greater Capital City Statistical Area (GCCSA), Local Government Area (LGA), Statistical Area Level 1 (SA1) and 2 (SA2), and State Suburb (SSC) boundaries.This map contains layers that contain some of the more commonly used variables from the General Community Profile information from the Australian Bureau of Statistics 2021 census. Data is available for Country, Greater Capital City Statistical Area (GCCSA), Local Government Area (LGA), Statistical Area Level 1 (SA1) and 2 (SA2), and Suburb and Localities (SAL) boundaries.The General Community Profile contains a series of tables showing the characteristics of persons, families and dwellings in a selected geographic area. The data is based on place of usual residence (that is, where people usually live, rather than where they were counted on Census night). Community Profiles are excellent tools for researching, planning and analysing geographic areas for a number of social, economic and demographic characteristics.Download the data here.Data and Geography notes:View the Readme files located in the DataPacks and GeoPackages zip files.To access the 2021 DataPacks, visit https://www.abs.gov.au/census/find-census-data/datapacksGlossary terms and definitions of classifications can be found in the 2021 Census DictionaryMore information about Census data products is available at https://www.abs.gov.au/census/guide-census-data/about-census-tools/datapacksDetailed geography information: https://www.abs.gov.au/statistics/standards/australian-statistical-geography-standard-asgs-edition-3/jul2021-jun2026/main-structure-and-greater-capital-city-statistical-areas: 2021 Statistical Area Level 1 (SA1), 2021 Statistical Area Level 2 (SA2), 2021 Greater Capital City Statistical Areas (GCCSA), 2021 Australia (AUS)https://www.abs.gov.au/statistics/standards/australian-statistical-geography-standard-asgs-edition-3/jul2021-jun2026/non-abs-structures: 2021 Suburbs and Localities (SAL), 2021 Local Government Areas (LGA)Please note that there are data assumptions that should be considered when analysing the ABS Census data. These are detailed within the Census documents referenced above. These include:Registered Marital StatusIn December 2017, amendments to the Marriage Act 1961 came into effect enabling marriage equality for all couples. For 2021, registered marriages include all couples.Core Activity Need for AssistanceMeasures the number of people with a profound or severe core activity limitation. People with a profound or severe core activity limitation are those needing assistance in their day to day lives in one or more of the three core activity areas of self-care, mobility and communication because of a long-term health condition (lasting six months or more), a disability (lasting six months or more), or old age. Number of Motor VehiclesExcludes motorbikes, motor scooters and heavy vehicles.Please note that there are small random adjustments made to all cell values to protect the confidentiality of data. These adjustments may cause the sum of rows or columns to differ by small amounts from table totals.Source: Australian Bureau of Statistics

Population density metrics for 2011 Statistical Area Level 2 (SA2) within 2011 Greater Capital City Statistical Areas (GCCSA), including SA2 Population-weighted density (PWD) for 2011 and 2014, PWD change 2011-2014, and ERP population counts by density classes. Selected Density Classes were based on the Australian Population Density Grid published by the ABS, December 2014 (cat. no. 1270.0.55.007). Corresponding population metrics for 2011 GCCSAs. PWD using standardised 1km grid cells provides a more comparable measure of the density in larger regions. It does this by weighting the density using the proportion of population living at that density. In this way the density measure reflects the density at which people actually live. This removes the effect of large unpopulated areas that may be within the regions being compared. In this way comparisons between regions are more valid.

The map service can be viewed at http://soe.terria.io/#share=s-AgXEN0N0Q95icRW7M9JIC9IYBdE

Downloadable spatial data also available below.

Map prepared by the ABS and presented as Figure BLT3 in Built environment theme of the 2016 State of the Environment Report, available at http://www.soe.environment.gov.au.

Statistical Area Level 1 (SA1)

Statistical Areas Level 1 (SA1s) are designed to maximise the geographic detail available for Census of Population and Housing data while maintaining confidentiality.

SA1s are built from whole Mesh Blocks and have a population between 200 and 800 people. In remote and regional areas they generally have smaller populations than those in urban areas. SA1s are designed to represent Aboriginal and Torres Strait Islander communities as accurately as possible, particularly in remote areas.

Using SA1s with Census data

Use SA1s to see how Census characteristics vary at a neighbourhood scale within larger areas such as Suburbs or Local Government Areas.

​

Australian Bureau of Statistics (Jul2021-Jun2026), Data services and APIs, ABS Website, accessed 25 July 2023.

https://www.abs.gov.au/website-privacy-copyright-and-disclaimer#copyright-and-creative-commons

This statistic shows the share of ethnic groups in Australia in the total population. 33 percent of the total population of Australia are english.

Australia’s population

Australia’s ethnic diversity can be attributed to their history and location. The country’s colonization from Europeans is a significant reason for the majority of its population being Caucasian. Additionally, being that Australia is one of the most developed countries closest to Eastern Asia; its Asian population comes as no surprise.

Australia is one of the world’s most developed countries, often earning recognition as one of the world’s economical leaders. With a more recent economic boom, Australia has become an attractive country for students and workers alike, who seek an opportunity to improve their lifestyle. Over the past decade, Australia’s population has slowly increased and is expected to continue to do so over the next several years. A beautiful landscape, many work opportunities and a high quality of life helped play a role in the country’s development. In 2011, Australia was considered to have one of the highest life expectancies in the world, with the average Australian living to approximately 82 years of age.

From an employment standpoint, Australia has maintained a rather low employment rate compared to many other developed countries. After experiencing a significant jump in unemployment in 2009, primarily due to the world economic crisis, Australia has been able to remain stable and slightly increase employment year-over-year.