In 2025, India overtook China as the world's most populous country and now has almost 1.46 billion people. China now has the second-largest population in the world, still with just over 1.4 billion inhabitants, however, its population went into decline in 2023. Global population As of 2025, the world's population stands at almost 8.2 billion people and is expected to reach around 10.3 billion people in the 2080s, when it will then go into decline. Due to improved healthcare, sanitation, and general living conditions, the global population continues to increase; mortality rates (particularly among infants and children) are decreasing and the median age of the world population has steadily increased for decades. As for the average life expectancy in industrial and developing countries, the gap has narrowed significantly since the mid-20th century. Asia is the most populous continent on Earth; 11 of the 20 largest countries are located there. It leads the ranking of the global population by continent by far, reporting four times as many inhabitants as Africa. The Demographic Transition The population explosion over the past two centuries is part of a phenomenon known as the demographic transition. Simply put, this transition results from a drastic reduction in mortality, which then leads to a reduction in fertility, and increase in life expectancy; this interim period where death rates are low and birth rates are high is where this population explosion occurs, and population growth can remain high as the population ages. In today's most-developed countries, the transition generally began with industrialization in the 1800s, and growth has now stabilized as birth and mortality rates have re-balanced. Across less-developed countries, the stage of this transition varies; for example, China is at a later stage than India, which accounts for the change in which country is more populous - understanding the demographic transition can help understand the reason why China's population is now going into decline. The least-developed region is Sub-Saharan Africa, where fertility rates remain close to pre-industrial levels in some countries. As these countries transition, they will undergo significant rates of population growth.

Among the 19 G20 countries, India had the largest population in October 2024, overtaking China as the most populous country in the world in 2023. Both countries had an estimated population of *** billion people. The number of inhabitants in India is expected to be over *** billion people in 2029, higher than in China at *** billion.

The average for 2024 based on 196 countries was 41.28 million. The highest value was in India: 1450.94 million and the lowest value was in Tuvalu: 0.01 million. The indicator is available from 1960 to 2024. Below is a chart for all countries where data are available.

• The current US Census Bureau world population estimate in June 2019 shows that the current global population is 7,577,130,400 people on Earth, which far exceeds the world population of 7.2 billion in 2015. Our estimate based on UN data shows the world's population surpassing 7.7 billion.
• China is the most populous country in the world with a population exceeding 1.4 billion. It is one of just two countries with a population of more than 1 billion, with India being the second. As of 2018, India has a population of over 1.355 billion people, and its population growth is expected to continue through at least 2050. By the year 2030, India is expected to become the most populous country in the world. This is because India’s population will grow, while China is projected to see a loss in population.
• The following 11 countries that are the most populous in the world each have populations exceeding 100 million. These include the United States, Indonesia, Brazil, Pakistan, Nigeria, Bangladesh, Russia, Mexico, Japan, Ethiopia, and the Philippines. Of these nations, all are expected to continue to grow except Russia and Japan, which will see their populations drop by 2030 before falling again significantly by 2050.
• Many other nations have populations of at least one million, while there are also countries that have just thousands. The smallest population in the world can be found in Vatican City, where only 801 people reside.
• In 2018, the world’s population growth rate was 1.12%. Every five years since the 1970s, the population growth rate has continued to fall. The world’s population is expected to continue to grow larger but at a much slower pace. By 2030, the population will exceed 8 billion. In 2040, this number will grow to more than 9 billion. In 2055, the number will rise to over 10 billion, and another billion people won’t be added until near the end of the century. The current annual population growth estimates from the United Nations are in the millions - estimating that over 80 million new lives are added yearly.
• This population growth will be significantly impacted by nine specific countries which are situated to contribute to the population growth more quickly than other nations. These nations include the Democratic Republic of the Congo, Ethiopia, India, Indonesia, Nigeria, Pakistan, Uganda, the United Republic of Tanzania, and the United States of America. Particularly of interest, India is on track to overtake China's position as the most populous country by 2030. Additionally, multiple nations within Africa are expected to double their populations before fertility rates begin to slow entirely.

Content

• In this Dataset, we have Historical Population data for every Country/Territory in the world by different parameters like Area Size of the Country/Territory, Name of the Continent, Name of the Capital, Density, Population Growth Rate, Ranking based on Population, World Population Percentage, etc. >Dataset Glossary (Column-Wise):
• Rank: Rank by Population.
• CCA3: 3 Digit Country/Territories Code.
• Country/Territories: Name of the Country/Territories.
• Capital: Name of the Capital.
• Continent: Name of the Continent.
• 2022 Population: Population of the Country/Territories in the year 2022.
• 2020 Population: Population of the Country/Territories in the year 2020.
• 2015 Population: Population of the Country/Territories in the year 2015.
• 2010 Population: Population of the Country/Territories in the year 2010.
• 2000 Population: Population of the Country/Territories in the year 2000.
• 1990 Population: Population of the Country/Territories in the year 1990.
• 1980 Population: Population of the Country/Territories in the year 1980.
• 1970 Population: Population of the Country/Territories in the year 1970.
• Area (km²): Area size of the Country/Territories in square kilometers.
• Density (per km²): Population Density per square kilometer.
• Growth Rate: Population Growth Rate by Country/Territories.
• World Population Percentage: The population percentage by each Country/Territories.

Russia is the largest country in the world by far, with a total area of just over 17 million square kilometers. After Antarctica, the next three countries are Canada, the U.S., and China; all between 9.5 and 10 million square kilometers. The figures given include internal water surface area (such as lakes or rivers) - if the figures were for land surface only then China would be the second largest country in the world, the U.S. third, and Canada (the country with more lakes than the rest of the world combined) fourth. Russia Russia has a population of around 145 million people, putting it in the top ten most populous countries in the world, and making it the most populous in Europe. However, it's vast size gives it a very low population density, ranked among the bottom 20 countries. Most of Russia's population is concentrated in the west, with around 75 percent of the population living in the European part, while around 75 percent of Russia's territory is in Asia; the Ural Mountains are considered the continental border. Elsewhere in the world Beyond Russia, the world's largest countries all have distinctive topographies and climates setting them apart. The United States, for example, has climates ranging from tundra in Alaska to tropical forests in Florida, with various mountain ranges, deserts, plains, and forests in between. Populations in these countries are often concentrated in urban areas, and are not evenly distributed across the country. For example, around 85 percent of Canada's population lives within 100 miles of the U.S. border; around 95 percent of China lives east of the Heihe–Tengchong Line that splits the country; and the majority of populations in large countries such as Australia or Brazil live near the coast.

The average for 2023 based on 196 countries was 0.51 percent. The highest value was in India: 17.94 percent and the lowest value was in Andorra: 0 percent. The indicator is available from 1960 to 2023. Below is a chart for all countries where data are available.

The statistic shows the total population of India from 2019 to 2029. In 2023, the estimated total population in India amounted to approximately 1.43 billion people.

Total population in India

India currently has the second-largest population in the world and is projected to overtake top-ranking China within forty years. Its residents comprise more than one-seventh of the entire world’s population, and despite a slowly decreasing fertility rate (which still exceeds the replacement rate and keeps the median age of the population relatively low), an increasing life expectancy adds to an expanding population. In comparison with other countries whose populations are decreasing, such as Japan, India has a relatively small share of aged population, which indicates the probability of lower death rates and higher retention of the existing population.

With a land mass of less than half that of the United States and a population almost four times greater, India has recognized potential problems of its growing population. Government attempts to implement family planning programs have achieved varying degrees of success. Initiatives such as sterilization programs in the 1970s have been blamed for creating general antipathy to family planning, but the combined efforts of various family planning and contraception programs have helped halve fertility rates since the 1960s. The population growth rate has correspondingly shrunk as well, but has not yet reached less than one percent growth per year.

As home to thousands of ethnic groups, hundreds of languages, and numerous religions, a cohesive and broadly-supported effort to reduce population growth is difficult to create. Despite that, India is one country to watch in coming years. It is also a growing economic power; among other measures, its GDP per capita was expected to triple between 2003 and 2013 and was listed as the third-ranked country for its share of the global gross domestic product.

Rural population (% of total population) in India was reported at 63.13 % in 2024, according to the World Bank collection of development indicators, compiled from officially recognized sources. India - Rural population - actual values, historical data, forecasts and projections were sourced from the World Bank on September of 2025.

This feature layers contain demographics about age, gender, education, employment, assets & amenities as reported by Office of the Registrar General & Census Commissioner, India in the Census 2011. These attributes cover topics such as male and female population counts by age, literacy, occupation, and household characteristics.Census of India counts every resident in India at village level. It is mandated by The Census Act 1948 of the Constitution and takes place every 10 years.Other demographics layers are also available:State DemographicsDistrict DemographicsSub-district DemographicsVillage DemographicsCombined DemographicsEach layer contains the same set of demographic attributes. Each geography level has a viewing range optimal for the geography size, and the map has increasing detail as you zoom in to smaller areas.Data source: Explore Census DataAdmin boundary source (country, states, and districts): Survey of India, 2020For more information: 2011 Census Demographic ProfileFor feedback please contact: content@esri.inData Processing notes:Country, State and District boundaries are simplified representations offered from the Survey of India database.Sub-districts and village boundaries are developed based on the census provided maps.Field names and aliases are processed by Esri India as created for the ArcGIS Platform.For a list of fields and alias names, access the following excel document.Disclaimer:The boundaries may not be perfectly align with AGOL imagery. The Census PDF maps are georeferenced using Survey of India boundaries and notice alignment issues with AGOL Imagery/ Maps. 33k villages are marked as point location on Census PDFs either because of low scale maps where small villages could not have been drawn or digitization has not been completed. These villages are marked as 100m circular polygons in the data.This web layer is offered by Esri India, for ArcGIS Online subscribers. If you have any questions or comments, please let us know via content@esri.in.

Key information about India population

• The India population reached 1,408.0 million people in Mar 2025, compared with the previously reported figure of 1,395.0 million people in Mar 2024
• The data reached an all-time high of 1,408.0 million people in Mar 2025 and a record low of 359.0 million people in Mar 1951

Abstract

Different countries have different health outcomes that are in part due to the way respective health systems perform. Regardless of the type of health system, individuals will have health and non-health expectations in terms of how the institution responds to their needs. In many countries, however, health systems do not perform effectively and this is in part due to lack of information on health system performance, and on the different service providers.

The aim of the WHO World Health Survey is to provide empirical data to the national health information systems so that there is a better monitoring of health of the people, responsiveness of health systems and measurement of health-related parameters.

The overall aims of the survey is to examine the way populations report their health, understand how people value health states, measure the performance of health systems in relation to responsiveness and gather information on modes and extents of payment for health encounters through a nationally representative population based community survey. In addition, it addresses various areas such as health care expenditures, adult mortality, birth history, various risk factors, assessment of main chronic health conditions and the coverage of health interventions, in specific additional modules.

The objectives of the survey programme are to: 1. develop a means of providing valid, reliable and comparable information, at low cost, to supplement the information provided by routine health information systems. 2. build the evidence base necessary for policy-makers to monitor if health systems are achieving the desired goals, and to assess if additional investment in health is achieving the desired outcomes. 3. provide policy-makers with the evidence they need to adjust their policies, strategies and programmes as necessary.

Geographic coverage

The survey sampling frame must cover 100% of the country's eligible population, meaning that the entire national territory must be included. This does not mean that every province or territory need be represented in the survey sample but, rather, that all must have a chance (known probability) of being included in the survey sample.

There may be exceptional circumstances that preclude 100% national coverage. Certain areas in certain countries may be impossible to include due to reasons such as accessibility or conflict. All such exceptions must be discussed with WHO sampling experts. If any region must be excluded, it must constitute a coherent area, such as a particular province or region. For example if ¾ of region D in country X is not accessible due to war, the entire region D will be excluded from analysis.

Analysis unit

Households and individuals

Universe

The WHS will include all male and female adults (18 years of age and older) who are not out of the country during the survey period. It should be noted that this includes the population who may be institutionalized for health reasons at the time of the survey: all persons who would have fit the definition of household member at the time of their institutionalisation are included in the eligible population.

If the randomly selected individual is institutionalized short-term (e.g. a 3-day stay at a hospital) the interviewer must return to the household when the individual will have come back to interview him/her. If the randomly selected individual is institutionalized long term (e.g. has been in a nursing home the last 8 years), the interviewer must travel to that institution to interview him/her.

The target population includes any adult, male or female age 18 or over living in private households. Populations in group quarters, on military reservations, or in other non-household living arrangements will not be eligible for the study. People who are in an institution due to a health condition (such as a hospital, hospice, nursing home, home for the aged, etc.) at the time of the visit to the household are interviewed either in the institution or upon their return to their household if this is within a period of two weeks from the first visit to the household.

Kind of data

Sample survey data [ssd]

Sampling procedure

SAMPLING GUIDELINES FOR WHS

Surveys in the WHS program must employ a probability sampling design. This means that every single individual in the sampling frame has a known and non-zero chance of being selected into the survey sample. While a Single Stage Random Sample is ideal if feasible, it is recognized that most sites will carry out Multi-stage Cluster Sampling.

The WHS sampling frame should cover 100% of the eligible population in the surveyed country. This means that every eligible person in the country has a chance of being included in the survey sample. It also means that particular ethnic groups or geographical areas may not be excluded from the sampling frame.

The sample size of the WHS in each country is 5000 persons (exceptions considered on a by-country basis). An adequate number of persons must be drawn from the sampling frame to account for an estimated amount of non-response (refusal to participate, empty houses etc.). The highest estimate of potential non-response and empty households should be used to ensure that the desired sample size is reached at the end of the survey period. This is very important because if, at the end of data collection, the required sample size of 5000 has not been reached additional persons must be selected randomly into the survey sample from the sampling frame. This is both costly and technically complicated (if this situation is to occur, consult WHO sampling experts for assistance), and best avoided by proper planning before data collection begins.

All steps of sampling, including justification for stratification, cluster sizes, probabilities of selection, weights at each stage of selection, and the computer program used for randomization must be communicated to WHO

STRATIFICATION

Stratification is the process by which the population is divided into subgroups. Sampling will then be conducted separately in each subgroup. Strata or subgroups are chosen because evidence is available that they are related to the outcome (e.g. health, responsiveness, mortality, coverage etc.). The strata chosen will vary by country and reflect local conditions. Some examples of factors that can be stratified on are geography (e.g. North, Central, South), level of urbanization (e.g. urban, rural), socio-economic zones, provinces (especially if health administration is primarily under the jurisdiction of provincial authorities), or presence of health facility in area. Strata to be used must be identified by each country and the reasons for selection explicitly justified.

Stratification is strongly recommended at the first stage of sampling. Once the strata have been chosen and justified, all stages of selection will be conducted separately in each stratum. We recommend stratifying on 3-5 factors. It is optimum to have half as many strata (note the difference between stratifying variables, which may be such variables as gender, socio-economic status, province/region etc. and strata, which are the combination of variable categories, for example Male, High socio-economic status, Xingtao Province would be a stratum).

Strata should be as homogenous as possible within and as heterogeneous as possible between. This means that strata should be formulated in such a way that individuals belonging to a stratum should be as similar to each other with respect to key variables as possible and as different as possible from individuals belonging to a different stratum. This maximises the efficiency of stratification in reducing sampling variance.

MULTI-STAGE CLUSTER SELECTION

A cluster is a naturally occurring unit or grouping within the population (e.g. enumeration areas, cities, universities, provinces, hospitals etc.); it is a unit for which the administrative level has clear, nonoverlapping boundaries. Cluster sampling is useful because it avoids having to compile exhaustive lists of every single person in the population. Clusters should be as heterogeneous as possible within and as homogenous as possible between (note that this is the opposite criterion as that for strata). Clusters should be as small as possible (i.e. large administrative units such as Provinces or States are not good clusters) but not so small as to be homogenous.

In cluster sampling, a number of clusters are randomly selected from a list of clusters. Then, either all members of the chosen cluster or a random selection from among them are included in the sample. Multistage sampling is an extension of cluster sampling where a hierarchy of clusters are chosen going from larger to smaller.

In order to carry out multi-stage sampling, one needs to know only the population sizes of the sampling units. For the smallest sampling unit above the elementary unit however, a complete list of all elementary units (households) is needed; in order to be able to randomly select among all households in the TSU, a list of all those households is required. This information may be available from the most recent population census. If the last census was >3 years ago or the information furnished by it was of poor quality or unreliable, the survey staff will have the task of enumerating all households in the smallest randomly selected sampling unit. It is very important to budget for this step if it is necessary and ensure that all households are properly enumerated in order that a representative sample is obtained.

It is always best to have as many clusters in the PSU as possible. The reason for this is that the fewer the number of respondents in each PSU, the lower will be the clustering effect which

In 2024, Germany was the leading EU country in terms of population, with around 85 million inhabitants. In 2050, approximately 89.2 million people will live in Germany, according to the forecast. See the total EU population figures for more information. The global population The global population is rapidly increasing. Between 1990 and 2015, it increased by around 2 billion people. Furthermore, it is estimated that the global population will have increased by another 1 billion by 2030. Asia is the continent with the largest population, followed by Africa and Europe. In Asia,the two most populous nations worldwide are located, China and India. In 2014, the combined population in China and India alone amounted to more than 2.6 billion people. for comparison, the total population in the whole continent of Europe is at around 741 million people. As of 2014, about 60 percent of the global population was living in Asia, with only approximately 10 percent in Europe and even less in the United States. Europe is the continent with the second-highest life expectancy at birth in the world, only barely surpassed by Northern America. In 2013, the life expectancy at birth in Europe was around 78 years. Stable economies and developing and emerging markets in European countries provide for good living conditions. Seven of the top twenty countries in the world with the largest gross domestic product in 2015 are located in Europe.

This feature layers contain demographics about age, gender, education, employment, assets & amenities as reported by Office of the Registrar General & Census Commissioner, India in the Census 2011. These attributes cover topics such as male and female population counts by age, literacy, occupation, and household characteristics.Census of India counts every resident in India at village level. It is mandated by The Census Act 1948 of the Constitution and takes place every 10 years.Other demographics layers are also available:Country DemographicsState DemographicsSub-district DemographicsVillage DemographicsCombined DemographicsEach layer contains the same set of demographic attributes. Each geography level has a viewing range optimal for the geography size, and the map has increasing detail as you zoom in to smaller areas.Data source: Explore Census DataAdmin boundary source (country, states, and districts): Survey of India, 2020For more information: 2011 Census Demographic ProfileFor feedback please contact: content@esri.inData Processing notes:Country, State and District boundaries are simplified representations offered from the Survey of India database.Sub-districts and village boundaries are developed based on the census provided maps.Field names and aliases are processed by Esri India as created for the ArcGIS Platform.For a list of fields and alias names, access the following excel document.Disclaimer:The boundaries may not be perfectly align with AGOL imagery. The Census PDF maps are georeferenced using Survey of India boundaries and notice alignment issues with AGOL Imagery/ Maps. 33k villages are marked as point location on Census PDFs either because of low scale maps where small villages could not have been drawn or digitization has not been completed. These villages are marked as 100m circular polygons in the data.This web layer is offered by Esri India, for ArcGIS Online subscribers. If you have any questions or comments, please let us know via content@esri.in.

Russia is the largest country in Europe, and also the largest in the world, its total size amounting to 17 million square kilometers (km2). It should be noted, however, that over three quarters of Russia is located in Asia, and the Ural mountains are often viewed as the meeting point of the two continents in Russia; nonetheless, European Russia is still significantly larger than any other European country. Ukraine, the second largest country on the continent, is only 603,000 km2, making it about 28 times smaller than its eastern neighbor, or seven times smaller than the European part of Russia. France is the third largest country in Europe, but the largest in the European Union. The Vatican City, often referred to as the Holy Sea, is both the smallest country in Europe and in the world, at just one km2. Population Russia is also the most populous country in Europe. It has around 144 million inhabitants across the country; in this case, around three quarters of the population live in the European part, which still gives it the largest population in Europe. Despite having the largest population, Russia is a very sparsely populated country due to its size and the harsh winters. Germany is the second most populous country in Europe, with 83 million inhabitants, while the Vatican has the smallest population. Worldwide, India and China are the most populous countries, with approximately 1.4 billion inhabitants each. Cities Moscow in Russia is ranked as the most populous city in Europe with around 13 million inhabitants, although figures vary, due to differences in the methodologies used by countries and sources. Some statistics include Istanbul in Turkey* as the largest city in Europe with its 15 million inhabitants, bit it has been excluded here as most of the country and parts of the city is located in Asia. Worldwide, Tokyo is the most populous city, with Jakarta the second largest and Delhi the third.

This feature layers contain demographics about age, gender, education, employment, assets & amenities as reported by Office of the Registrar General & Census Commissioner, India in the Census 2011. These attributes cover topics such as male and female population counts by age, literacy, occupation, and household characteristics.Census of India counts every resident in India at village level. It is mandated by The Census Act 1948 of the Constitution and takes place every 10 years.Other demographics layers are also available:Country DemographicsState DemographicsDistrict DemographicsVillage DemographicsCombined DemographicsEach layer contains the same set of demographic attributes. Each geography level has a viewing range optimal for the geography size, and the map has increasing detail as you zoom in to smaller areas.Data source: Explore Census DataAdmin boundary source (country, states, and districts): Survey of India, 2020For more information: 2011 Census Demographic ProfileFor feedback please contact: content@esri.inData Processing notes:Country, State and District boundaries are simplified representations offered from the Survey of India database.Sub-districts and village boundaries are developed based on the census provided maps.Field names and aliases are processed by Esri India as created for the ArcGIS Platform.For a list of fields and alias names, access the following excel document.Disclaimer:The boundaries may not be perfectly align with AGOL imagery. The Census PDF maps are georeferenced using Survey of India boundaries and notice alignment issues with AGOL Imagery/ Maps. 33k villages are marked as point location on Census PDFs either because of low scale maps where small villages could not have been drawn or digitization has not been completed. These villages are marked as 100m circular polygons in the data.This web layer is offered by Esri India, for ArcGIS Online subscribers. If you have any questions or comments, please let us know

Abstract

The Global Consumption Database (GCD) contains information on consumption patterns at the national level, by urban/rural area, and by income level (4 categories: lowest, low, middle, higher with thresholds based on a global income distribution), for 92 low and middle-income countries, as of 2010. The data were extracted from national household surveys. The consumption is presented by category of products and services of the International Comparison Program (ICP) 2005, which mostly corresponds to COICOP. For three countries, sub-national data are also available (Brazil, India, and South Africa). Data on population estimates are also included.

       The data file can be used for the production of the following tables (by urban/rural and income class/consumption segment):
       - Sample Size by Country, Area and Consumption Segment (Number of Households)
       - Population 2010 by Country, Area and Consumption Segment
       - Population 2010 by Country, Area and Consumption Segment, as a Percentage of the National Population
       - Population 2010 by Country, Area and Consumption Segment, as a Percentage of the Area Population
       - Population 2010 by Country, Age Group, Sex and Consumption Segment
       - Household Consumption 2010 by Country, Sector, Area and Consumption Segment in Local Currency (Million)
       - Household Consumption 2010 by Country, Sector, Area and Consumption Segment in $PPP (Million)
       - Household Consumption 2010 by Country, Sector, Area and Consumption Segment in US$ (Million)
       - Household Consumption 2010 by Country, Category of Product/Service, Area and Consumption Segment in Local Currency (Million)
       - Household Consumption 2010 by Country, Category of Product/Service, Area and Consumption Segment in $PPP (Million)
       - Household Consumption 2010 by Country, Category of Product/Service, Area and Consumption Segment in US$ (Million)
       - Household Consumption 2010 by Country, Product/Service, Area and Consumption Segment in Local Currency (Million)
       - Household Consumption 2010 by Country, Product/Service, Area and Consumption Segment in $PPP (Million)
       - Household Consumption 2010 by Country, Product/Service, Area and Consumption Segment in US$ (Million)
       - Per Capita Consumption 2010 by Country, Sector, Area and Consumption Segment in Local Currency
       - Per Capita Consumption 2010 by Country, Sector, Area and Consumption Segment in US$
       - Per Capita Consumption 2010 by Country, Sector, Area and Consumption Segment in $PPP
       - Per Capita Consumption 2010 by Country, Category of Product/Service, Area and Consumption Segment in Local Currency
       - Per Capita Consumption 2010 by Country, Category of Product/Service, Area and Consumption Segment in US$
       - Per Capita Consumption 2010 by Country, Category of Product/Service, Area and Consumption Segment in $PPP
       - Per Capita Consumption 2010 by Country, Product or Service, Area and Consumption Segment in Local Currency
       - Per Capita Consumption 2010 by Country, Product or Service, Area and Consumption Segment in US$
       - Per Capita Consumption 2010 by Country, Product or Service, Area and Consumption Segment in $PPP
       - Consumption Shares 2010 by Country, Sector, Area and Consumption Segment (Percent)
       - Consumption Shares 2010 by Country, Category of Products/Services, Area and Consumption Segment (Percent)
       - Consumption Shares 2010 by Country, Product/Service, Area and Consumption Segment (Percent)
       - Percentage of Households who Reported Having Consumed the Product or Service by Country, Consumption Segment and Area (as of Survey Year)

Geographic coverage notes

For all countries, estimates are provided at the national level and at the urban/rural levels. For Brazil, India, and South Africa, data are also provided at the sub-national level (admin 1): - Brazil: ACR, Alagoas, Amapa, Amazonas, Bahia, Ceara, Distrito Federal, Espirito Santo, Goias, Maranhao, Mato Grosso, Mato Grosso do Sul, Minas Gerais, Para, Paraiba, Parana, Pernambuco, Piaji, Rio de Janeiro, Rio Grande do Norte, Rio Grande do Sul, Rondonia, Roraima, Santa Catarina, Sao Paolo, Sergipe, Tocatins - India: Andaman and Nicobar Islands, Andhra Pradesh, Arinachal Pradesh, Assam, Bihar, Chandigarh, Chattisgarh, Dadra and Nagar Haveli, Daman and Diu, Delhi, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Lakshadweep, Madya Pradesh, Maharastra, Manipur, Meghalaya, Mizoram, Nagaland, Orissa, Pondicherry, Punjab, Rajasthan, Sikkim, Tamil Nadu, Tripura, Uttar Pradesh, Uttaranchal, West Bengal - South Africa: Eastern Cape, Free State, Gauteng, Kwazulu Natal, Limpopo, Mpulamanga, Northern Cape, North West, Western Cape

Kind of data

Data derived from survey microdata

India Census: Population: by Religion: Muslim: Urban data was reported at 68,740,419.000 Person in 2011. This records an increase from the previous number of 49,393,496.000 Person for 2001. India Census: Population: by Religion: Muslim: Urban data is updated yearly, averaging 59,066,957.500 Person from Mar 2001 (Median) to 2011, with 2 observations. The data reached an all-time high of 68,740,419.000 Person in 2011 and a record low of 49,393,496.000 Person in 2001. India Census: Population: by Religion: Muslim: Urban data remains active status in CEIC and is reported by Census of India. The data is categorized under India Premium Database’s Demographic – Table IN.GAE001: Census: Population: by Religion.

India Population: Census: Age: 45 to 49 Year data was reported at 62,318.327 Person th in 03-01-2011. This records an increase from the previous number of 47,409.000 Person th for 03-01-2001. India Population: Census: Age: 45 to 49 Year data is updated decadal, averaging 47,409.000 Person th from Mar 1991 (Median) to 03-01-2011, with 3 observations. The data reached an all-time high of 62,318.327 Person th in 03-01-2011 and a record low of 36,134.000 Person th in 03-01-1991. India Population: Census: Age: 45 to 49 Year data remains active status in CEIC and is reported by Office of the Registrar General & Census Commissioner, India. The data is categorized under India Premium Database’s Demographic – Table IN.GAD001: Census: Population: by Age Group.

This feature layers contain demographics about age, gender, education, employment, assets & amenities as reported by Office of the Registrar General & Census Commissioner, India in the Census 2011. These attributes cover topics such as male and female population counts by age, literacy, occupation, and household characteristics.Census of India counts every resident in India at village level. It is mandated by The Census Act 1948 of the Constitution and takes place every 10 years.Other demographics layers are also available:Country DemographicsState DemographicsDistrict DemographicsSub-district DemographicsCombined DemographicsEach layer contains the same set of demographic attributes. Each geography level has a viewing range optimal for the geography size, and the map has increasing detail as you zoom in to smaller areas.Data source: Explore Census DataAdmin boundary source (country, states, and districts): Survey of India, 2020For more information: 2011 Census Demographic ProfileFor feedback please contact: content@esri.inData Processing notes:Country, State and District boundaries are simplified representations offered from the Survey of India database.Sub-districts and village boundaries are developed based on the census provided maps.Field names and aliases are processed by Esri India as created for the ArcGIS Platform.For a list of fields and alias names, access the following excel document.Disclaimer:The boundaries may not be perfectly align with AGOL imagery. The Census PDF maps are georeferenced using Survey of India boundaries and notice alignment issues with AGOL Imagery/ Maps. 33k villages are marked as point location on Census PDFs either because of low scale maps where small villages could not have been drawn or digitization has not been completed. These villages are marked as 100m circular polygons in the data.This web layer is offered by Esri India, for ArcGIS Online subscribers. If you have any questions or comments, please let us know via content@esri.in.

Abstract

The National Family Health Survey (NFHS) was carried out as the principal activity of a collaborative project to strengthen the research capabilities of the Population Reasearch Centres (PRCs) in India, initiated by the Ministry of Health and Family Welfare (MOHFW), Government of India, and coordinated by the International Institute for Population Sciences (IIPS), Bombay. Interviews were conducted with a nationally representative sample of 89,777 ever-married women in the age group 13-49, from 24 states and the National Capital Territoty of Delhi. The main objective of the survey was to collect reliable and up-to-date information on fertility, family planning, mortality, and maternal and child health. Data collection was carried out in three phases from April 1992 to September 1993. THe NFHS is one of the most complete surveys of its kind ever conducted in India.

The households covered in the survey included 500,492 residents. The young age structure of the population highlights the momentum of the future population growth of the country; 38 percent of household residents are under age 15, with their reproductive years still in the future. Persons age 60 or older constitute 8 percent of the population. The population sex ratio of the de jure residents is 944 females per 1,000 males, which is slightly higher than sex ratio of 927 observed in the 1991 Census.

The primary objective of the NFHS is to provide national-level and state-level data on fertility, nuptiality, family size preferences, knowledge and practice of family planning, the potentiel demand for contraception, the level of unwanted fertility, utilization of antenatal services, breastfeeding and food supplemation practises, child nutrition and health, immunizations, and infant and child mortality. The NFHS is also designed to explore the demographic and socioeconomic determinants of fertility, family planning, and maternal and child health. This information is intended to assist policymakers, adminitrators and researchers in assessing and evaluating population and family welfare programmes and strategies. The NFHS used uniform questionnaires and uniform methods of sampling, data collection and analysis with the primary objective of providing a source of demographic and health data for interstate comparisons. The data collected in the NFHS are also comparable with those of the Demographic and Health Surveys (DHS) conducted in many other countries.

Geographic coverage

National

Analysis unit

• Household
• Data collected for women 13-49, indicators calculated for women 15-49

Universe

The population covered by the 1992-93 DHS is defined as the universe of all women age 13-49 who were either permanent residents of the households in the NDHS sample or visitors present in the households on the night before the survey were eligible to be interviewed.

Kind of data

Sample survey data

Sampling procedure

SAMPLE DESIGN

The sample design for the NFHS was discussed during a Sample Design Workshop held in Madurai in Octber, 1991. The workshop was attended by representative from the PRCs; the COs; the Office of the Registrar General, India; IIPS and the East-West Center/Macro International. A uniform sample design was adopted in all the NFHS states. The Sample design adopted in each state is a systematic, stratified sample of households, with two stages in rural areas and three stages in urban areas.

SAMPLE SIZE AND ALLOCATION

The sample size for each state was specified in terms of a target number of completed interviews with eligible women. The target sample size was set considering the size of the state, the time and ressources available for the survey and the need for separate estimates for urban and rural areas of the stat. The initial target sample size was 3,000 completed interviews with eligible women for states having a population of 25 million or less in 1991; 4,000 completed interviews for large states with more than 25 million population; 8,000 for Uttar Pradesh, the largest state; and 1,000 each for the six small northeastern states. In States with a substantial number of backward districts, the initial target samples were increased so as to allow separate estimates to be made for groups of backward districts.

The urban and rural samples within states were drawn separetly and , to the extent possible, sample allocation was proportional to the size of the urban-rural populations (to facilitate the selection of a self-weighting sample for each state). In states where the urban population was not sufficiently large to provide a sample of at least 1,000 completed interviews with eligible women, the urban areas were appropriately oversampled (except in the six small northeastern states).

THE RURAL SAMPLE: THE FRAME, STRATIFICATION AND SELECTION

A two-stage stratified sampling was adopted for the rural areas: selection of villages followed by selection of households. Because the 1991 Census data were not available at the time of sample selection in most states, the 1981 Census list of villages served as the sampling frame in all the states with the exception of Assam, Delhi and Punjab. In these three states the 1991 Census data were used as the sampling frame.

Villages were stratified prior to selection on the basis of a number of variables. The firts level of stratification in all the states was geographic, with districts subdivided into regions according to their geophysical characteristics. Within each of these regions, villages were further stratified using some of the following variables : village size, distance from the nearest town, proportion of nonagricultural workers, proportion of the population belonging to scheduled castes/scheduled tribes, and female literacy. However, not all variables were used in every state. Each state was examined individually and two or three variables were selected for stratification, with the aim of creating not more than 12 strata for small states and not more than 15 strata for large states. Females literacy was often used for implicit stratification (i.e., the villages were ordered prior to selection according to the proportion of females who were literate). Primary sampling Units (PSUs) were selected systematically, with probaility proportional to size (PPS). In some cases, adjacent villages with small population sizes were combined into a single PSU for the purpose of sample selection. On average, 30 households were selected for interviewing in each selected PSU.

In every state, all the households in the selected PSUs were listed about two weeks prior to the survey. This listing provided the necessary frame for selecting households at the second sampling stage. The household listing operation consisted of preparing up-to-date notional and layout sketch maps of each selected PSU, assigning numbers to structures, recording addresses (or locations) of these structures, identifying the residential structures, and listing the names of the heads of all the households in the residentiak structures in the selected PSU. Each household listing team consisted of a lister and a mapper. The listing operation was supervised by the senior field staff of the concerned CO and the PRC in each state. Special efforts were made not to miss any household in the selected PSU during the listing operation. In PSUs with fewer than 500 households, a complete household listing was done. In PSUs with 500 or more households, segmentation of the PSU was done on the basis of existing wards in the PSU, and two segments were selected using either systematic sampling or PPS sampling. The household listing in such PSUs was carried out in the selected segments. The households to be interviewed were selected from provided with the original household listing, layout sketch map and the household sample selected for each PSU. All the selected households were approached during the data collection, and no substitution of a household was allowed under any circumstances.

THE RURAL URBAN SAMPLE: THE FRAME, STRATIFICATION AND SELECTION

A three-stage sample design was adopted for the urban areas in each state: selection of cities/towns, followed by urban blocks, and finally households. Cities and towns were selected using the 1991 population figures while urban blocks were selected using the 1991 list of census enumeration blocks in all the states with the exception of the firts phase states. For the first phase states, the list of urban blocks provided by the National Sample Survey Organization (NSSSO) served as the sampling frame.

All cities and towns were subdivided into three strata: (1) self-selecting cities (i.e., cities with a population large enough to be selected with certainty), (2) towns that are district headquaters, and (3) other towns. Within each stratum, the cities/towns were arranged according to the same kind of geographic stratification used in the rural areas. In self-selecting cities, the sample was selected according to a two-stage sample design: selection of the required number of urban blocks, followed by selection of households in each of selected blocks. For district headquarters and other towns, a three stage sample design was used: selection of towns with PPS, followed by selection of two census blocks per selected town, followed by selection of households from each selected block. As in rural areas, a household listing was carried out in the selected blocks, and an average of 20 households per block was selected systematically.

Mode of data collection

Face-to-face

Research instrument

Three types of questionnaires were used in the NFHS: the Household Questionnaire, the Women's Questionnaire, and the Village Questionnaire. The overall content