In the past four centuries, the population of the United States has grown from a recorded 350 people around the Jamestown colony of Virginia in 1610, to an estimated 331 million people in 2020. The pre-colonization populations of the indigenous peoples of the Americas have proven difficult for historians to estimate, as their numbers decreased rapidly following the introduction of European diseases (namely smallpox, plague and influenza). Native Americans were also omitted from most censuses conducted before the twentieth century, therefore the actual population of what we now know as the United States would have been much higher than the official census data from before 1800, but it is unclear by how much. Population growth in the colonies throughout the eighteenth century has primarily been attributed to migration from the British Isles and the Transatlantic slave trade; however it is also difficult to assert the ethnic-makeup of the population in these years as accurate migration records were not kept until after the 1820s, at which point the importation of slaves had also been illegalized. Nineteenth century In the year 1800, it is estimated that the population across the present-day United States was around six million people, with the population in the 16 admitted states numbering at 5.3 million. Migration to the United States began to happen on a large scale in the mid-nineteenth century, with the first major waves coming from Ireland, Britain and Germany. In some aspects, this wave of mass migration balanced out the demographic impacts of the American Civil War, which was the deadliest war in U.S. history with approximately 620 thousand fatalities between 1861 and 1865. The civil war also resulted in the emancipation of around four million slaves across the south; many of whose ancestors would take part in the Great Northern Migration in the early 1900s, which saw around six million black Americans migrate away from the south in one of the largest demographic shifts in U.S. history. By the end of the nineteenth century, improvements in transport technology and increasing economic opportunities saw migration to the United States increase further, particularly from southern and Eastern Europe, and in the first decade of the 1900s the number of migrants to the U.S. exceeded one million people in some years. Twentieth and twenty-first century The U.S. population has grown steadily throughout the past 120 years, reaching one hundred million in the 1910s, two hundred million in the 1960s, and three hundred million in 2007. In the past century, the U.S. established itself as a global superpower, with the world's largest economy (by nominal GDP) and most powerful military. Involvement in foreign wars has resulted in over 620,000 further U.S. fatalities since the Civil War, and migration fell drastically during the World Wars and Great Depression; however the population continuously grew in these years as the total fertility rate remained above two births per woman, and life expectancy increased (except during the Spanish Flu pandemic of 1918).

Since the Second World War, Latin America has replaced Europe as the most common point of origin for migrants, with Hispanic populations growing rapidly across the south and border states. Because of this, the proportion of non-Hispanic whites, which has been the most dominant ethnicity in the U.S. since records began, has dropped more rapidly in recent decades. Ethnic minorities also have a much higher birth rate than non-Hispanic whites, further contributing to this decline, and the share of non-Hispanic whites is expected to fall below fifty percent of the U.S. population by the mid-2000s. In 2020, the United States has the third-largest population in the world (after China and India), and the population is expected to reach four hundred million in the 2050s.

The 1940 Census Public Use Microdata Sample Project was assembled through a collaborative effort between the United States Bureau of the Census and the Center for Demography and Ecology at the University of Wisconsin. The collection contains a stratified 1-percent sample of households, with separate records for each household, for each "sample line" respondent, and for each person in the household. These records were encoded from microfilm copies of original handwritten enumeration schedules from the 1940 Census of Population. Geographic identification of the location of the sampled households includes Census regions and divisions, states (except Alaska and Hawaii), standard metropolitan areas (SMAs), and state economic areas (SEAs). Accompanying the data collection is a codebook that includes an abstract, descriptions of sample design, processing procedures and file structure, a data dictionary (record layout), category code lists, and a glossary. Also included is a procedural history of the 1940 Census. Each of the 20 subsamples contains three record types: household, sample line, and person. Household variables describe the location and condition of the household. The sample line records contain variables describing demographic characteristics such as nativity, marital status, number of children, veteran status, wage deductions for Social Security, and occupation. Person records also contain variables describing demographic characteristics including nativity, marital status, family membership, education, employment status, income, and occupation. (Source: downloaded from ICPSR 7/13/10)

Please Note: This dataset is part of the historical CISER Data Archive Collection and is also available at ICPSR at https://doi.org/10.3886/ICPSR08236.v1. We highly recommend using the ICPSR version as they may make this dataset available in multiple data formats in the future.

Abstract

The Integrated Public Use Microdata Series (IPUMS) Complete Count Data include more than 650 million individual-level and 7.5 million household-level records. The IPUMS microdata are the result of collaboration between IPUMS and the nation’s two largest genealogical organizations—Ancestry.com and FamilySearch—and provides the largest and richest source of individual level and household data.

Before Manuscript Submission

All manuscripts (and other items you'd like to publish) must be submitted to

phsdatacore@stanford.edu for approval prior to journal submission.

We will check your cell sizes and citations.

For more information about how to cite PHS and PHS datasets, please visit:

https:/phsdocs.developerhub.io/need-help/citing-phs-data-core

Documentation

Historic data are scarce and often only exists in aggregate tables. The key advantage of historic US census data is the availability of individual and household level characteristics that researchers can tabulate in ways that benefits their specific research questions. The data contain demographic variables, economic variables, migration variables and family variables. Within households, it is possible to create relational data as all relations between household members are known. For example, having data on the mother and her children in a household enables researchers to calculate the mother’s age at birth. Another advantage of the Complete Count data is the possibility to follow individuals over time using a historical identifier.

In sum: the historic US census data are a unique source for research on social and economic change and can provide population health researchers with information about social and economic determinants.Historic data are scarce and often only exists in aggregate tables. The key advantage of historic US census data is the availability of individual and household level characteristics that researchers can tabulate in ways that benefits their specific research questions. The data contain demographic variables, economic variables, migration variables and family variables. Within households, it is possible to create relational data as all relations between household members are known. For example, having data on the mother and her children in a household enables researchers to calculate the mother’s age at birth. Another advantage of the Complete Count data is the possibility to follow individuals over time using a historical identifier. In sum: the historic US census data are a unique source for research on social and economic change and can provide population health researchers with information about social and economic determinants.

The historic US 1940 census data was collected in April 1940. Enumerators collected data traveling to households and counting the residents who regularly slept at the household. Individuals lacking permanent housing were counted as residents of the place where they were when the data was collected. Household members absent on the day of data collected were either listed to the household with the help of other household members or were scheduled for the last census subdivision.

Notes

• We provide IPUMS household and person data separately so that it is convenient to explore the descriptive statistics on each level. In order to obtain a full dataset, merge the household and person on the variables SERIAL and SERIALP. In order to create a longitudinal dataset, merge datasets on the variable HISTID.
• Households with more than 60 people in the original data were broken up for processing purposes. Every person in the large households are considered to be in their own household. The original large households can be identified using the variable SPLIT40, reconstructed using the variable SERIAL40, and the original count is found in the variable NUMPREC40.
• Some variables are missing from this data set for specific enumeration districts. The enumeration districts with missing data can be identified using the variable EDMISS. These variables will be added in a future release.
• Coded variables derived from string variables are still in progress. These variables include: occupation, industry and migration status.
• Missing observations have been allocated and some inconsistencies have been edited for the following variables: Missing observations have been allocated and some inconsistencies have been edited for the following variables: SURSIM, SEX, SCHOOL, RELATE, RACE, OCC1950, MTONGUE, MBPL, FBPL, BPL, MARST, EMPSTAT, CITIZEN, OWNERSHP. The flag variables indicating an allocated observation for the associated variables can be included in your extract by clicking the ‘Select data quality flags’ box on the extract summary page.
• Most inconsistent information was not edited for this release, thus there are observations outside of the universe for many variables. In particular, the variables GQ, and GQTYPE have known inconsistencies and will be improved with the next r

In 1938, the year before the outbreak of the Second world War, the countries with the largest populations were China, the Soviet Union, and the United States, although the United Kingdom had the largest overall population when it's colonies, dominions, and metropole are combined. Alongside France, these were the five Allied "Great Powers" that emerged victorious from the Second World War. The Axis Powers in the war were led by Germany and Japan in their respective theaters, and their smaller populations were decisive factors in their defeat. Manpower as a resource In the context of the Second World War, a country or territory's population played a vital role in its ability to wage war on such a large scale. Not only were armies able to call upon their people to fight in the war and replenish their forces, but war economies were also dependent on their workforce being able to meet the agricultural, manufacturing, and logistical demands of the war. For the Axis powers, invasions and the annexation of territories were often motivated by the fact that it granted access to valuable resources that would further their own war effort - millions of people living in occupied territories were then forced to gather these resources, or forcibly transported to work in manufacturing in other Axis territories. Similarly, colonial powers were able to use resources taken from their territories to supply their armies, however this often had devastating consequences for the regions from which food was redirected, contributing to numerous food shortages and famines across Africa, Asia, and Europe. Men from annexed or colonized territories were also used in the armies of the war's Great Powers, and in the Axis armies especially. This meant that soldiers often fought alongside their former-enemies. Aftermath The Second World War was the costliest in human history, resulting in the deaths of between 70 and 85 million people. Due to the turmoil and destruction of the war, accurate records for death tolls generally do not exist, therefore pre-war populations (in combination with other statistics), are used to estimate death tolls. The Soviet Union is believed to have lost the largest amount of people during the war, suffering approximately 24 million fatalities by 1945, followed by China at around 20 million people. The Soviet death toll is equal to approximately 14 percent of its pre-war population - the countries with the highest relative death tolls in the war are found in Eastern Europe, due to the intensity of the conflict and the systematic genocide committed in the region during the war.

United States Population: All Ages data was reported at 325,719.000 Person th in 2017. This records an increase from the previous number of 323,406.000 Person th for 2016. United States Population: All Ages data is updated yearly, averaging 176,356.000 Person th from Jun 1900 (Median) to 2017, with 118 observations. The data reached an all-time high of 325,719.000 Person th in 2017 and a record low of 76,094.000 Person th in 1900. United States Population: All Ages data remains active status in CEIC and is reported by US Census Bureau. The data is categorized under Global Database’s United States – Table US.G002: Population by Age. Series Remarks Population data for the years 1900 to 1949 exclude the population residing in Alaska and Hawaii. Population data for the years 1940 to 1979 cover the resident population plus Armed Forces overseas. Population data for all other years cover only the resident population.

In 2023, about 17.7 percent of the American population was 65 years old or over; an increase from the last few years and a figure which is expected to reach 22.8 percent by 2050. This is a significant increase from 1950, when only eight percent of the population was 65 or over. A rapidly aging population In recent years, the aging population of the United States has come into focus as a cause for concern, as the nature of work and retirement is expected to change to keep up. If a population is expected to live longer than the generations before, the economy will have to change as well to fulfill the needs of the citizens. In addition, the birth rate in the U.S. has been falling over the last 20 years, meaning that there are not as many young people to replace the individuals leaving the workforce. The future population It’s not only the American population that is aging -- the global population is, too. By 2025, the median age of the global workforce is expected to be 39.6 years, up from 33.8 years in 1990. Additionally, it is projected that there will be over three million people worldwide aged 100 years and over by 2050.

This is an extract of the decennial Public Use Microdata Sample (PUMS) released by the Bureau of the Census. Because the complete PUMS files contain several hundred thousand records, ICPSR has constructed this subset to allow for easier and less costly analysis. The collection of data at ten year increments allows the user to follow various age cohorts through the life-cycle. Data include information on the household and its occupants such as size and value of dwelling, utility costs, number of people in the household, and their relationship to the respondent. More detailed information was collected on the respondent, the head of household, and the spouse, if present. Variables include education, marital status, occupation and income.

The 1940 Census population schedules were created by the Bureau of the Census in an attempt to enumerate every person living in the United States on April 1, 1940, although some persons were missed. The 1940 census population schedules were digitized by the National Archives and Records Administration (NARA) and released publicly on April 2, 2012. The 1940 Census enumeration district maps contain maps of counties, cities, and other minor civil divisions that show enumeration districts, census tracts, and related boundaries and numbers used for each census. The coverage is nation wide and includes territorial areas. The 1940 Census enumeration district descriptions contain written descriptions of census districts, subdivisions, and enumeration districts.

United States Department of Commerce.

This dataset includes all households from the 1940 US census.

The Census Tree is the largest-ever database of record links among the historical U.S. censuses, with over 700 million links for people living in the United States between 1850 and 1940. These links allow researchers to construct a longitudinal dataset that is highly representative of the population, and that includes women, Black Americans, and other under-represented populations at unprecedented rates. Each .csv file consists of a crosswalk between the two years indicated in the filename, using the IPUMS histids. For more information, consult the included Read Me file, and visit https://censustree.org.

This study of trends in California from 1940 to 1980 fills in some of the information voids for this period. It is based on data from, the U.S. Decennial Census micro data for 1940 and 1950, better known as the Public Use Microdata Samples or "PUMS" data. Variables, variable names and variable order have been normalized for ease of use and analysis.

This dataset includes all individuals from the 1940 US census.

This dataset includes variable names, variable labels, variable values, and corresponding variable value labels for the IPUMS 1940 datasets.

Chart and table of population level and growth rate for the state of California from 1900 to 2024.

These data comprise Census records relating to the Alaskan people's population demographics for the State of Alaskan Salmon and People (SASAP) Project. Decennial census data were originally extracted from IPUMS National Historic Geographic Information Systems website: https://data2.nhgis.org/main (Citation: Steven Manson, Jonathan Schroeder, David Van Riper, and Steven Ruggles. IPUMS National Historical Geographic Information System: Version 12.0 [Database]. Minneapolis: University of Minnesota. 2017. http://doi.org/10.18128/D050.V12.0). A number of relevant tables of basic demographics on age and race, household income and poverty levels, and labor force participation were extracted. These particular variables were selected as part of an effort to understand and potentially quantify various dimensions of well-being in Alaskan communities. The file "censusdata_master.csv" is a consolidation of all 21 other data files in the package. For detailed information on how the datasets vary over different years, view the file "readme.docx" available in this data package. The included .Rmd file is a script which combines the 21 files by year into a single file (censusdata_master.csv). It also cleans up place names (including typographical errors) and uses the USGS place names dataset and the SASAP regions dataset to assign latitude and longitude values and region values to each place in the dataset. Note that some places were not assigned a region or location because they do not fit well into the regional framework. Considerable heterogeneity exists between census surveys each year. While we have attempted to combine these datasets in a way that makes sense, there may be some discrepancies or unexpected values. The RMarkdown document SASAPWebsiteGraphicsCensus.Rmd is used to generate a variety of figures using these data, including the additional file Chignik_population.png. An additional set of 25 figures showing regional trends in population and income metrics are also included.

Due to the devastating impact of the Second World War on the Soviet population, the total population in 1950 was almost 15.5 million fewer than in 1940, which is a decrease of eight percent. In Russia (RSFSR), the largest of the Soviet states, the population difference was almost nine million people; also eight percent. It would take until 1955 for the populations of either the USSR or Russia to reach their pre-war levels, which was a decade after the conflict had ended. Urbanization Despite this drop in total population, industrialization and urbanization saw a significant change in the USSR's population distribution between the given years. The Soviet urban population increased by 6.3 million, or ten percent, between 1940 and 1950; 5.8 million of this was in Russia, which was a 15 percent increase. In contrast, the Soviet Union's rural population dropped by 21.8 million (a 17 percent change), 14.5 million of which in Russia (a decrease of 20 percent). In terms of overall population, the urban population of the USSR rose from 33 to 39 percent between 1940 and 1950, and from 34 to 43 percent in Russia. By 1955, 44 percent of the Soviet population, and 49 percent of the Russian population, lived in an urban setting.

In 2021, about 41 percent of the United States population aged 25 to 34 years had attained a bachelor's degree or higher, showing an increasing trend. In contrast, during 1940, only around six percent of the population among those ages attained a bachelor's degree.

About this dataset

Context

The dataset tabulates the Harnett County population distribution across 18 age groups. It lists the population in each age group along with the percentage population relative of the total population for Harnett County. The dataset can be utilized to understand the population distribution of Harnett County by age. For example, using this dataset, we can identify the largest age group in Harnett County.

Key observations

The largest age group in Harnett County, NC was for the group of age 30 to 34 years years with a population of 10,925 (8%), according to the ACS 2019-2023 5-Year Estimates. At the same time, the smallest age group in Harnett County, NC was the 85 years and over years with a population of 1,940 (1.42%). Source: U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group in consideration
• Population: The population for the specific age group in the Harnett County is shown in this column.
• % of Total Population: This column displays the population of each age group as a proportion of Harnett County total population. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Harnett County Population by Age. You can refer the same here

About this dataset

Context

The dataset tabulates the New Port Richey population distribution across 18 age groups. It lists the population in each age group along with the percentage population relative of the total population for New Port Richey. The dataset can be utilized to understand the population distribution of New Port Richey by age. For example, using this dataset, we can identify the largest age group in New Port Richey.

Key observations

The largest age group in New Port Richey, FL was for the group of age 60 to 64 years years with a population of 1,940 (11.59%), according to the ACS 2018-2022 5-Year Estimates. At the same time, the smallest age group in New Port Richey, FL was the 10 to 14 years years with a population of 580 (3.46%). Source: U.S. Census Bureau American Community Survey (ACS) 2018-2022 5-Year Estimates

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2018-2022 5-Year Estimates

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group in consideration
• Population: The population for the specific age group in the New Port Richey is shown in this column.
• % of Total Population: This column displays the population of each age group as a proportion of New Port Richey total population. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for New Port Richey Population by Age. You can refer the same here