In the middle of 2023, about 60 percent of the global population was living in Asia.The total world population amounted to 8.1 billion people on the planet. In other words 4.7 billion people were living in Asia as of 2023. Global populationDue to medical advances, better living conditions and the increase of agricultural productivity, the world population increased rapidly over the past century, and is expected to continue to grow. After reaching eight billion in 2023, the global population is estimated to pass 10 billion by 2060. Africa expected to drive population increase Most of the future population increase is expected to happen in Africa. The countries with the highest population growth rate in 2024 were mostly African countries. While around 1.47 billion people live on the continent as of 2024, this is forecast to grow to 3.9 billion by 2100. This is underlined by the fact that most of the countries wit the highest population growth rate are found in Africa. The growing population, in combination with climate change, puts increasing pressure on the world's resources.

Closeness centrality (cc; grsg_lcp_closeness_centrality) measures the average length of the shortest path between the node and all other nodes in the graph. The more central a node, the closer it is to all other nodes and the more likely information/movements can flow to other nodes. Closeness is computed as one divided by the average path lengths from a node to its neighbors, which assumes that important nodes are close to other nodes. The data were defined from least-cost paths (LCPs) constructed into minimum spanning trees (MSTs). We identified a threshold of the cc normalized value (>0.047) where patterns of network connectivity occurred in our graph. The cc identified leks with the greatest number of shortest paths between neighboring leks and therefore reflected the highest concentration of shortest paths between leks within an area. Leks identified with a cc value greater than our threshold were buffered by 15 km (inter-patch movement distance and distance of genetic flow), resulting in this dataset. Closeness centrality captured large areas with a higher density of sage-grouse, which we used to evaluate our derived population structure. Understanding wildlife population structure and connectivity can help managers identify conservation strategies, as structure can facilitate the study of population changes and habitat connectivity can provide information on dispersal and biodiversity. We developed an approach to define hierarchical population structure (in other words, demarcation of subpopulations) using graph theory (in other words, connectivity) from an amalgamation of biological inferences encompassing dispersal capabilities based on movements and genetic flow, seasonal habitat conditions, and functional processes (for example, selection of habitat at multiple scales) affecting movements. We applied our approach to greater sage-grouse (Centrocercus urophasianus), an upland gamebird species of conservation concern in western United States. We defined sage-grouse population structure by creating a cost surface, informed from functional processes of habitat characteristics to account for the resistance of inter-patch movements, and developing least-cost paths between breeding habitat sites (leks). The least-cost paths were combined into a multi-path graph construct for which we then used information on potential connectivity (dispersal distances) and functional connectivity (permeability of fragmented landscapes based on selection preferences) to decompose the graph into structures of subpopulations.

Globally, about 25 percent of the population is under 15 years of age and 10 percent is over 65 years of age. Africa has the youngest population worldwide. In Sub-Saharan Africa, more than 40 percent of the population is below 15 years, and only three percent are above 65, indicating the low life expectancy in several of the countries. In Europe, on the other hand, a higher share of the population is above 65 years than the population under 15 years. Fertility rates The high share of children and youth in Africa is connected to the high fertility rates on the continent. For instance, South Sudan and Niger have the highest population growth rates globally. However, about 50 percent of the world’s population live in countries with low fertility, where women have less than 2.1 children. Some countries in Europe, like Latvia and Lithuania, have experienced a population decline of one percent, and in the Cook Islands, it is even above two percent. In Europe, the majority of the population was previously working-aged adults with few dependents, but this trend is expected to reverse soon, and it is predicted that by 2050, the older population will outnumber the young in many developed countries. Growing global population As of 2025, there are 8.1 billion people living on the planet, and this is expected to reach more than nine billion before 2040. Moreover, the global population is expected to reach 10 billions around 2060, before slowing and then even falling slightly by 2100. As the population growth rates indicate, a significant share of the population increase will happen in Africa.

The layer was derived and compiled from the U.S. Census Bureau’s 2013 – 2017 American Community Survey (ACS) 5-Year Estimates in order to assist 2020 Census planning purposes.

Source: U.S. Census Bureau, Table B26001 GROUP QUARTERS POPULATION, 2013 – 2017 ACS 5-Year Estimates

Effective Date: December 2018

Last Update: December 2019

Update Cycle: ACS 5-Year Estimates update annually each December. Vintage used for 2020 Census planning purposes by Broward County.

We present five hierarchical demarcations of greater sage-grouse population structure, representing the spatial structure of populations which can exist due to differences in dispersal abilities, landscape configurations, and mating behavior. These demarcations represent Thiessen polygons of graph constructs (least-cost path [LCP] minimum spanning trees [MST; LCP-MST]) representing greater sage-grouse population structure. Because the graphs included locational information of sage-grouse breeding sites, we have provided polygons of the population structure. We also present two results using graph analytics representing node/connectivity importance based on our population structure. Understanding wildlife population structure and connectivity can help managers identify conservation strategies, as structure can facilitate the study of population changes and habitat connectivity can provide information on dispersal and biodiversity. We developed an approach to define hierarchical population structure (in other words, demarcation of subpopulations) using graph theory (in other words, connectivity) from an amalgamation of biological inferences encompassing dispersal capabilities based on movements and genetic flow, seasonal habitat conditions, and functional processes (for example, selection of habitat at multiple scales) affecting movements. We applied our approach to greater sage-grouse (Centrocercus urophasianus), an upland gamebird species of conservation concern in western United States. We defined sage-grouse population structure by creating a cost surface, informed from functional processes of habitat characteristics to account for the resistance of inter-patch movements, and developing least-cost paths between breeding habitat sites (leks). The least-cost paths were combined into a multi-path graph construct for which we then used information on potential connectivity (dispersal distances) and functional connectivity (permeability of fragmented landscapes based on selection preferences) to decompose the graph into structures of subpopulations.

This table contains key figures for the population of the Netherlands.

The table distinguishes the following: — Population by gender; — Population according to marital status; Population by age; — Population by migrant background; — Private households; — Persons in institutional households; — Population growth; — Population density.

CBS is moving on to a new classification of the population by origin. From now on, it is more decisive where someone was born, in addition to where one’s parents were born. The word ‘migration background’ is no longer used. The main division of Western/Non-Western is replaced by a classification based on continents and common immigration countries. This classification is gradually introduced in tables and publications with population by origin.

Data available from 1950 to 2022.

Status of the figures: All figures in the table are final.

Amendments as of 23 March 2023: None, this table has been discontinued.

When will new figures come out? No longer applicable. This table is followed by the Population table; key figures. See paragraph 3.

The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article I, Section 2 of the Constitution and all households in the U.S. and individuals living in group quarters were required by law to respond to the 2010 Census questionnaire. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute billions in federal funds to local communities. The questionnaire consisted of a limited number of questions but allowed for the collection of information on the number of people in the household and their relationship to the householder, an individual's age, sex, race and Hispanic ethnicity, the number of housing units and whether those units are owner- or renter-occupied, or vacant. The first wave of results for sub-state geographic areas in New Mexico was released on March 15, 2011, through the Redistricting Data (PL94-171) Summary File. This batch of data covers the state, counties, places (both incorporated and unincorporated communities), tribal lands, school districts, neighborhoods (census tracts and block groups), individual census blocks, and other areas. The Redistricting products provide counts by race and Hispanic ethnicity for the total population and the population 18 years and over, and housing unit counts by occupancy status. The 2010 Census Redistricting Data Summary File can be used to redraw federal, state and local legislative districts under Public Law 94-171. This is an important purpose of the file and, indeed, state officials use the Redistricting Data to realign congressional and state legislative districts in their states, taking into account population shifts since the 2000 Census. More detailed population and housing characteristics were released in the summer of 2011. The data in this particular RGIS Clearinghouse table are for all blocks in Cibola County. The data table provides counts of the total population. This file, along with specific narrative descriptions and definitions (in Word and text formats) are available in a single zip file.

The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article I, Section 2 of the Constitution and all households in the U.S. and individuals living in group quarters were required by law to respond to the 2010 Census questionnaire. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute billions in federal funds to local communities. The questionnaire consisted of a limited number of questions but allowed for the collection of information on the number of people in the household and their relationship to the householder, an individual's age, sex, race and Hispanic ethnicity, the number of housing units and whether those units are owner- or renter-occupied, or vacant. The first wave of results for sub-state geographic areas in New Mexico was released on March 15, 2011, through the Redistricting Data (PL94-171) Summary File. This batch of data covers the state, counties, places (both incorporated and unincorporated communities), tribal lands, school districts, neighborhoods (census tracts and block groups), individual census blocks, and other areas. The Redistricting products provide counts by race and Hispanic ethnicity for the total population and the population 18 years and over, and housing unit counts by occupancy status. The 2010 Census Redistricting Data Summary File can be used to redraw federal, state and local legislative districts under Public Law 94-171. This is an important purpose of the file and, indeed, state officials use the Redistricting Data to realign congressional and state legislative districts in their states, taking into account population shifts since the 2000 Census. More detailed population and housing characteristics were released in the summer of 2011. The data in these particular RGIS Clearinghouse tables are for all counties in New Mexico. This table provides total counts of population. This file, along with file-specific descriptions (in Word and text formats) are available in a single zip file.

Population, female (% of total population) in World was reported at 49.71 % in 2023, according to the World Bank collection of development indicators, compiled from officially recognized sources. World - Population, female (% of total) - actual values, historical data, forecasts and projections were sourced from the World Bank on July of 2025.

The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article I, Section 2 of the Constitution and all households in the U.S. and individuals living in group quarters were required by law to respond to the 2010 Census questionnaire. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute billions in federal funds to local communities. The questionnaire consisted of a limited number of questions but allowed for the collection of information on the number of people in the household and their relationship to the householder, an individual's age, sex, race and Hispanic ethnicity, the number of housing units and whether those units are owner- or renter-occupied, or vacant. The first wave of results for sub-state geographic areas in New Mexico was released on March 15, 2011, through the Redistricting Data (PL94-171) Summary File. This batch of data covers the state, counties, places (both incorporated and unincorporated communities), tribal lands, school districts, neighborhoods (census tracts and block groups), individual census blocks, and other areas. The Redistricting products provide counts by race and Hispanic ethnicity for the total population and the population 18 years and over, and housing unit counts by occupancy status. The 2010 Census Redistricting Data Summary File can be used to redraw federal, state and local legislative districts under Public Law 94-171. This is an important purpose of the file and, indeed, state officials use the Redistricting Data to realign congressional and state legislative districts in their states, taking into account population shifts since the 2000 Census. More detailed population and housing characteristics were released in the summer of 2011. The data in this particular RGIS Clearinghouse table are for all blocks in Valencia County. The data table provides counts of the total population. This file, along with specific narrative descriptions and definitions (in Word and text formats) are available in a single zip file.

This data, grsg_lcp_ThiessenPoly_mst3, is one of five hierarchical delineations of greater sage-grouse population structure. The data represent Thiessen polygons of graph constructs (least-cost path minimum spanning tree [LCP-MST]) that defined our population structure of sage-grouse breeding sites in the western United States. This data was developed by applying dispersal and genetic rules to decompose the fully connected population structure (graph) into the product presented here. Understanding wildlife population structure and connectivity can help managers identify conservation strategies, as structure can facilitate the study of population changes and habitat connectivity can provide information on dispersal and biodiversity. We developed an approach to define hierarchical population structure (in other words, demarcation of subpopulations) using graph theory (in other words, connectivity) from an amalgamation of biological inferences encompassing dispersal capabilities based on movements and genetic flow, seasonal habitat conditions, and functional processes (for example, selection of habitat at multiple scales) affecting movements. We applied our approach to greater sage-grouse (Centrocercus urophasianus), an upland gamebird species of conservation concern in western United States. We defined sage-grouse population structure by creating a cost surface, informed from functional processes of habitat characteristics to account for the resistance of inter-patch movements, and developing least-cost paths between breeding habitat sites (leks). The least-cost paths were combined into a multi-path graph construct for which we then used information on potential connectivity (dispersal distances) and functional connectivity (permeability of fragmented landscapes based on selection preferences) to decompose the graph into structures of subpopulations.

Over the past 23 years, there were constantly more men than women living on the planet. Of the 8.06 billion people living on the Earth in 2023, 4.05 billion were men and 4.01 billion were women. One-quarter of the world's total population in 2024 was below 15 years.

The layer was derived and compiled from the U.S. Census Bureau’s 2013 – 2017 American Community Survey (ACS) 5-Year Estimates in order to assist 2020 Census planning purposes.

Source: U.S. Census Bureau, Table B05002 PLACE OF BIRTH BY NATIVITY AND CITIZENSHIP STATUS, 2013 – 2017 ACS 5-Year Estimates

Effective Date: December 2018

Last Update: December 2019

Update Cycle: ACS 5-Year Estimates update annually each December. Vintage used for 2020 Census planning purposes by Broward County.

Abstract

IPUMS-International is an effort to inventory, preserve, harmonize, and disseminate census microdata from around the world. The project has collected the world's largest archive of publicly available census samples. The data are coded and documented consistently across countries and over time to facillitate comparative research. IPUMS-International makes these data available to qualified researchers free of charge through a web dissemination system.

The IPUMS project is a collaboration of the Minnesota Population Center, National Statistical Offices, and international data archives. Major funding is provided by the U.S. National Science Foundation and the Demographic and Behavioral Sciences Branch of the National Institute of Child Health and Human Development. Additional support is provided by the University of Minnesota Office of the Vice President for Research, the Minnesota Population Center, and Sun Microsystems.

Geographic coverage

National coverage

Analysis unit

Household

UNITS IDENTIFIED: - Dwellings: No - Vacant units: No - Households: Yes - Individuals: Yes - Group quarters: No - Special populations: Floating population [Population flottante]: these are the homeless people, who live anywhere, near the market places, in the factories, in shacks or even on the pavement, etc.

UNIT DESCRIPTIONS: - Dwellings: A compound is a set of buildings, enclosed or not by a wall or by any other type of fence or paling. In some case it could be reduced to a single building (single hut, house with one or several apartments, or other cases), including a series of distinct dwelling units. Generally, it is placed under the authority of a compound head [Chef de Concession: C.C.]. A compound may include one or several household. - Households: A set of persons, related by blood or not, who live under the same roof and share part or all of their resources to cover their basic needs, in particular lodging and food. These persons are called the household members, take generally their meals together, and recognize the authority of a sole and same person, called the Household Head [Chef de ménage: C.M.]. This concept translates to the words the words ?njël? in Wolof, ?ngank? in Sereer, ?hirande? in Pulaar, and ?siitik? in Diola.

Universe

All persons living in the national territory

Kind of data

Census/enumeration data [cen]

Sampling procedure

MICRODATA SOURCE: National Statistical Office

SAMPLE DESIGN: Systematic sample of every 10th household with a random start, drawn by the Minnesota Population Center

SAMPLE UNIT: Household

SAMPLE FRACTION: 10%

SAMPLE SIZE (person records): 994,562

Mode of data collection

Face-to-face [f2f]

Research instrument

The questionnaire is divided into six sections. Section A is geographic identification of the household. Section B includes questions on the individual characteristics. Section C includes questions on the deads the occurred in the household last year. Section D includes questions on out-migrants who left the household in the past five years. Section D contains housing questions, and Section F contains questions on poverty.

The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article I, Section 2 of the Constitution and all households in the U.S. and individuals living in group quarters were required by law to respond to the 2010 Census questionnaire. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute billions in federal funds to local communities. The questionnaire consisted of a limited number of questions but allowed for the collection of information on the number of people in the household and their relationship to the householder, an individual's age, sex, race and Hispanic ethnicity, the number of housing units and whether those units are owner- or renter-occupied, or vacant. The first wave of results for sub-state geographic areas in New Mexico was released on March 15, 2011, through the Redistricting Data (PL94-171) Summary File. This batch of data covers the state, counties, places (both incorporated and unincorporated communities), tribal lands, school districts, neighborhoods (census tracts and block groups), individual census blocks, and other areas. The Redistricting products provide counts by race and Hispanic ethnicity for the total population and the population 18 years and over, and housing unit counts by occupancy status. The 2010 Census Redistricting Data Summary File can be used to redraw federal, state and local legislative districts under Public Law 94-171. This is an important purpose of the file and, indeed, state officials use the Redistricting Data to realign congressional and state legislative districts in their states, taking into account population shifts since the 2000 Census. More detailed population and housing characteristics were released in the summer of 2011. The data in this particular RGIS Clearinghouse table are for all blocks in Grant County. The data table provides counts of the total population. This file, along with specific narrative descriptions and definitions (in Word and text formats) are available in a single zip file.

The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article I, Section 2 of the Constitution and all households in the U.S. and individuals living in group quarters were required by law to respond to the 2010 Census questionnaire. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute billions in federal funds to local communities. The questionnaire consisted of a limited number of questions but allowed for the collection of information on the number of people in the household and their relationship to the householder, an individual's age, sex, race and Hispanic ethnicity, the number of housing units and whether those units are owner- or renter-occupied, or vacant. The first wave of results for sub-state geographic areas in New Mexico was released on March 15, 2011, through the Redistricting Data (PL94-171) Summary File. This batch of data covers the state, counties, places (both incorporated and unincorporated communities), tribal lands, school districts, neighborhoods (census tracts and block groups), individual census blocks, and other areas. The Redistricting products provide counts by race and Hispanic ethnicity for the total population and the population 18 years and over, and housing unit counts by occupancy status. The 2010 Census Redistricting Data Summary File can be used to redraw federal, state and local legislative districts under Public Law 94-171. This is an important purpose of the file and, indeed, state officials use the Redistricting Data to realign congressional and state legislative districts in their states, taking into account population shifts since the 2000 Census. More detailed population and housing characteristics were released in the summer of 2011. The data in this particular RGIS Clearinghouse table are for all blocks in San Miguel County. The data table provides counts of the total population. This file, along with specific narrative descriptions and definitions (in Word and text formats) are available in a single zip file.

The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article I, Section 2 of the Constitution and all households in the U.S. and individuals living in group quarters were required by law to respond to the 2010 Census questionnaire. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute billions in federal funds to local communities. The questionnaire consisted of a limited number of questions but allowed for the collection of information on the number of people in the household and their relationship to the householder, an individual's age, sex, race and Hispanic ethnicity, the number of housing units and whether those units are owner- or renter-occupied, or vacant. The first wave of results for sub-state geographic areas in New Mexico was released on March 15, 2011, through the Redistricting Data (PL94-171) Summary File. This batch of data covers the state, counties, places (both incorporated and unincorporated communities), tribal lands, school districts, neighborhoods (census tracts and block groups), individual census blocks, and other areas. The Redistricting products provide counts by race and Hispanic ethnicity for the total population and the population 18 years and over, and housing unit counts by occupancy status. The 2010 Census Redistricting Data Summary File can be used to redraw federal, state and local legislative districts under Public Law 94-171. This is an important purpose of the file and, indeed, state officials use the Redistricting Data to realign congressional and state legislative districts in their states, taking into account population shifts since the 2000 Census. More detailed population and housing characteristics were released in the summer of 2011. The data in this particular RGIS Clearinghouse table are for all blocks in De Baca County. The data table provides counts of the total population. This file, along with specific narrative descriptions and definitions (in Word and text formats) are available in a single zip file.

The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article I, Section 2 of the Constitution and all households in the U.S. and individuals living in group quarters were required by law to respond to the 2010 Census questionnaire. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute billions in federal funds to local communities. The questionnaire consisted of a limited number of questions but allowed for the collection of information on the number of people in the household and their relationship to the householder, an individual's age, sex, race and Hispanic ethnicity, the number of housing units and whether those units are owner- or renter-occupied, or vacant. The first wave of results for sub-state geographic areas in New Mexico was released on March 15, 2011, through the Redistricting Data (PL94-171) Summary File. This batch of data covers the state, counties, places (both incorporated and unincorporated communities), tribal lands, school districts, neighborhoods (census tracts and block groups), individual census blocks, and other areas. The Redistricting products provide counts by race and Hispanic ethnicity for the total population and the population 18 years and over, and housing unit counts by occupancy status. The 2010 Census Redistricting Data Summary File can be used to redraw federal, state and local legislative districts under Public Law 94-171. This is an important purpose of the file and, indeed, state officials use the Redistricting Data to realign congressional and state legislative districts in their states, taking into account population shifts since the 2000 Census. More detailed population and housing characteristics were released in the summer of 2011. The data in this particular RGIS Clearinghouse table are for all blocks in Otero County. The data table provides counts of the total population. This file, along with specific narrative descriptions and definitions (in Word and text formats) are available in a single zip file.

In 2022, India overtook China as the world's most populous country and now has almost 1.46 billion people. China now has the second-largest population in the world, still with just over 1.4 billion inhabitants, however, its population went into decline in 2023. Global population As of 2025, the world's population stands at almost 8.2 billion people and is expected to reach around 10.3 billion people in the 2080s, when it will then go into decline. Due to improved healthcare, sanitation, and general living conditions, the global population continues to increase; mortality rates (particularly among infants and children) are decreasing and the median age of the world population has steadily increased for decades. As for the average life expectancy in industrial and developing countries, the gap has narrowed significantly since the mid-20th century. Asia is the most populous continent on Earth; 11 of the 20 largest countries are located there. It leads the ranking of the global population by continent by far, reporting four times as many inhabitants as Africa. The Demographic Transition The population explosion over the past two centuries is part of a phenomenon known as the demographic transition. Simply put, this transition results from a drastic reduction in mortality, which then leads to a reduction in fertility, and increase in life expectancy; this interim period where death rates are low and birth rates are high is where this population explosion occurs, and population growth can remain high as the population ages. In today's most-developed countries, the transition generally began with industrialization in the 1800s, and growth has now stabilized as birth and mortality rates have re-balanced. Across less-developed countries, the stage of this transition varies; for example, China is at a later stage than India, which accounts for the change in which country is more populous - understanding the demographic transition can help understand the reason why China's population is now going into decline. The least-developed region is Sub-Saharan Africa, where fertility rates remain close to pre-industrial levels in some countries. As these countries transition, they will undergo significant rates of population growth

The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article I, Section 2 of the Constitution and all households in the U.S. and individuals living in group quarters were required by law to respond to the 2010 Census questionnaire. The data collected by the decennial census determine the number of seats each state has in the U.S. House of Representatives and is also used to distribute billions in federal funds to local communities. The questionnaire consisted of a limited number of questions but allowed for the collection of information on the number of people in the household and their relationship to the householder, an individual's age, sex, race and Hispanic ethnicity, the number of housing units and whether those units are owner- or renter-occupied, or vacant. The first wave of results for sub-state geographic areas in New Mexico was released on March 15, 2011, through the Redistricting Data (PL94-171) Summary File. This batch of data covers the state, counties, places (both incorporated and unincorporated communities), tribal lands, school districts, neighborhoods (census tracts and block groups), individual census blocks, and other areas. The Redistricting products provide counts by race and Hispanic ethnicity for the total population and the population 18 years and over, and housing unit counts by occupancy status. The 2010 Census Redistricting Data Summary File can be used to redraw federal, state and local legislative districts under Public Law 94-171. This is an important purpose of the file and, indeed, state officials use the Redistricting Data to realign congressional and state legislative districts in their states, taking into account population shifts since the 2000 Census. More detailed population and housing characteristics were released in the summer of 2011. The data in this particular RGIS Clearinghouse table are for all blocks in Torrance County. The data table provides counts of the total population. This file, along with specific narrative descriptions and definitions (in Word and text formats) are available in a single zip file.