This dataset reflects reported incidents of crime (with the exception of murders where data exists for each victim) that occurred in the City of Chicago from 2001 to present, minus the most recent seven days. Data is extracted from the Chicago Police Department's CLEAR (Citizen Law Enforcement Analysis and Reporting) system. In order to protect the privacy of crime victims, addresses are shown at the block level only and specific locations are not identified. Should you have questions about this dataset, you may contact the Research & Development Division of the Chicago Police Department at 312.745.6071 or RandD@chicagopolice.org. Disclaimer: These crimes may be based upon preliminary information supplied to the Police Department by the reporting parties that have not been verified. The preliminary crime classifications may be changed at a later date based upon additional investigation and there is always the possibility of mechanical or human error. Therefore, the Chicago Police Department does not guarantee (either expressed or implied) the accuracy, completeness, timeliness, or correct sequencing of the information and the information should not be used for comparison purposes over time. The Chicago Police Department will not be responsible for any error or omission, or for the use of, or the results obtained from the use of this information. All data visualizations on maps should be considered approximate and attempts to derive specific addresses are strictly prohibited. The Chicago Police Department is not responsible for the content of any off-site pages that are referenced by or that reference this web page other than an official City of Chicago or Chicago Police Department web page. The user specifically acknowledges that the Chicago Police Department is not responsible for any defamatory, offensive, misleading, or illegal conduct of other users, links, or third parties and that the risk of injury from the foregoing rests entirely with the user. The unauthorized use of the words "Chicago Police Department," "Chicago Police," or any colorable imitation of these words or the unauthorized use of the Chicago Police Department logo is unlawful. This web page does not, in any way, authorize such use. Data is updated daily Tuesday through Sunday. The dataset contains more than 65,000 records/rows of data and cannot be viewed in full in Microsoft Excel. Therefore, when downloading the file, select CSV from the Export menu. Open the file in an ASCII text editor, such as Wordpad, to view and search. To access a list of Chicago Police Department - Illinois Uniform Crime Reporting (IUCR) codes, go to http://data.cityofchicago.org/Public-Safety/Chicago-Police-Department-Illinois-Uniform-Crime-R/c7ck-438e

This is the GIS Project for the ASEBIO WebGIS.Here you can find all the spatial data for the 8 Ecosystem Services and also the Stakeholders' Perception Supply Potential. For more information about the data, please visit our website and WebGIS.

      Notice that this is a project package that only works within the ArcGIS Pro Desktop Software.

High impact GIS projects in 45 seconds or less (ArcGIS Blog)._Communities around the world are taking strides in mitigating the threat that COVID-19 (coronavirus) poses. Geography and location analysis have a crucial role in better understanding this evolving pandemic.When you need help quickly, Esri can provide data, software, configurable applications, and technical support for your emergency GIS operations. Use GIS to rapidly access and visualize mission-critical information. Get the information you need quickly, in a way that’s easy to understand, to make better decisions during a crisis.Esri’s Disaster Response Program (DRP) assists with disasters worldwide as part of our corporate citizenship. We support response and relief efforts with GIS technology and expertise.More information...

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Our final map product is a geographic information system (GIS) database of vegetation structure and composition across the Crater Lake National Park terrestrial landscape, including wetlands. The database includes photos we took at all relevé, validation, and accuracy assessment plots, as well as the plots that were done in the previous wetlands inventory. We conducted an accuracy assessment of the map by evaluating 698 stratified random accuracy assessment plots throughout the project area. We intersected these field data with the vegetation map, resulting in an overall thematic accuracy of 86.2 %. The accuracy of the Cliff, Scree & Rock Vegetation map unit was difficult to assess, as only 9% of this vegetation type was available for sampling due to lack of access. In addition, fires that occurred during the 2017 accuracy assessment field season affected our sample design and may have had a small influence on the accuracy. Our geodatabase contains the locations where particular associations are found at 600 relevé plots, 698 accuracy assessment plots, and 803 validation plots.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. GIS Database 2002-2005: Project Size = 1,898 acres Fort Larned National Historic Site (including the Rut Site) = 705 acres 16 Map Classes 11 Vegetated 5 Non-vegetated Minimum Mapping Unit = ½ hectare is the program standard but this was modified at FOLS to ¼ acre. Total Size = 229 Polygons Average Polygon Size = 8.3 acres Overall Thematic Accuracy = 92% To produce the digital map, a combination of 1:8,500-scale (0.75 meter pixels) color infrared digital ortho-imagery acquired on October 26, 2005 by the Kansas Applied Remote Sensing Program and 1:12,000-scale true color ortho-rectified imagery acquired in 2005 by the U.S. Department of Agriculture - Farm Service Agency’s Aerial Photography Field Office, and all of the GPS referenced ground data were used to interpret the complex patterns of vegetation and land-use. In the end, 16 map units (11 vegetated and 5 land-use) were developed and directly cross-walked or matched to corresponding plant associations and land-use classes. All of the interpreted and remotely sensed data were converted to Geographic Information System (GIS) databases using ArcGIS© software. Draft maps were printed, field tested, reviewed and revised. One hundred and six accuracy assessment (AA) data points were collected in 2006 by KNSHI and used to determine the map’s accuracy. After final revisions, the accuracy assessment revealed an overall thematic accuracy of 92%.

The Digital Geomorphic-GIS Map of Gulf Islands National Seashore (5-meter accuracy and 1-foot resolution 2006-2007 mapping), Mississippi and Florida is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (guis_geomorphology.gdb), a 2.) Open Geospatial Consortium (OGC) geopackage, and 3.) 2.2 KMZ/KML file for use in Google Earth, however, this format version of the map is limited in data layers presented and in access to GRI ancillary table information. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file (guis_geomorphology.mapx) and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (guis_geomorphology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). The OGC geopackage is supported with a QGIS project (.qgz) file. Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) A GIS readme file (guis_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (guis_geomorphology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (guis_geomorphology_metadata_faq.pdf). Please read the guis_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. Google Earth software is available for free at: https://www.google.com/earth/versions/. QGIS software is available for free at: https://www.qgis.org/en/site/. Users are encouraged to only use the Google Earth data for basic visualization, and to use the GIS data for any type of data analysis or investigation. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: U.S. Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (guis_geomorphology_metadata.txt or guis_geomorphology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:26,000 and United States National Map Accuracy Standards features are within (horizontally) 13.2 meters or 43.3 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in Google Earth, ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

Infrastructure projects are compiled from the capital improvement plans for Transportation, Airport & Ferry, Surface Water Management, and Sewers. Programs (chipseal, paving, guardrail) are not displayed. Project location, scope, and schedule are subject to change. Please read metadata for additional information(https://matterhorn.piercecountywa.gov/GISmetadata/pdbpubw_improvement_project_points.html). Any data download constitutes acceptance of the Terms of Use (https://matterhorn.piercecountywa.gov/Disclaimer/PierceCountyGISDataTermsofUse.pdf).

BC Energy Regulator Engineering Project approvals may be issued, upon application, under the authority of Section 100 of the Drilling and Production Regulation or Section 97 of the Petroleum and Natural Gas Act, depending on project type. Projects grant the applicant operating latitude, under specific conditions, for the purpose of extracting oil and/or natural gas in the most efficient way that will result in maximization of resource recovery and benefit to the Crown, balanced with surface impact and socio-economic factors. Examples are ?Good Engineering Practice?, allowing increased well density in a poor quality reservoir, or ?Pressure Maintenance Water Flood? to allow injection of water into an oil pool to increase total oil recovery. Spatial data for approved projects are included. Data is updated nightly.

Project Y4 Deliverable #5 3D maps/GIS of specific districts to be built on Y2 regional 3D map (Laverton, Kalgoorie-Kambalda)

The GIS database has been developed by under the Small Hydropower Mapping and Improved Geospatial Electrification Planning in Indonesia Project [Project ID: P145273]. The scope of the project was to facilitate and improve the planning and investment process for small hydro development both grid and isolated systems through: building up a central database on smal hydro at national scale and validating the mapping of small hydro in NTT, Maluku, Maluku Utara and Sulawesi improved electrification planning by integrating small hydro potential for the provinces of NTT, Maluku, Maluku Utara and Sulawesi into the planning process. Please refer to the country project page for additional outputs and reports: http://esmap.org/re_mapping_indonesia The GIS database contains the following datasets: SHP(promising sites) Admin Divisions Topomas_grid Rivers, Geology Forest_areas Roads RainfallGauges RunoffGauges ElectricSystem, each accompanied by a metadata file. Please cite as: [Data/information/map obtained from the] “World Bank via ENERGYDATA.info, under a project funded by the Energy Sector Management Assistance Program (ESMAP). For more information: Indonesia Small Hydro GIS Atlas, 2017, https://energydata.info/dataset/indonesia-small-hydro-gis-database-2017"

Abstract

This mapping project aimed to create a database of all financial, health, education, and agricultural service access points in Zambia.

Geographic coverage

National coverage except Ikelenge district

Analysis unit

Health care facilities, financial institutions, educational institutions, agricultural service providers

Universe

The project aimed to capture all open and operational touch-points at the time of fieldwork. Active points were considered to have done a transaction in the last 90 days. Not all points are captured due to several factors including:

i) non-location of the points ii) security areas iii) resistance or lack of cooperation iv) dormancy v) safety of fieldwork staff

Kind of data

Census/enumeration data [cen]

Mode of data collection

Face-to-face [f2f]

Research instrument

The questionnaires used in the MSMP are specific to each sector service intermediary. This means that there are 14 different questionnaires, each with its own set of specific questions.

Activity Project Area NEPA represents an area (polygon) within which one or more activities related to the National Environmental Policy Act (NEPA) are aggregated or organized. The data comes from the Forest Service's Natural Resource Manager (NRM) Forest Activity Tracking System (FACTS), which is the agency standard for managing information about activities related to fire/fuels, silviculture, and invasive species. FACTS is an activity tracking application for all levels of the Forest Service.These data are a central source for project area boundaries for use in national information requests and cross unit analysis and makes the project area boundaries and their basic attributes more easily available to field units. It also provides public access to the data during project planning and implementation. Please note that this dataset is not complete and forests continue to improve the quality of the data over time.Metadata and Downloads

Bear Lake provides a unique location to use bathymetric data to analyze the relationship between changing water surface elevations and the accessible spawning habitat for fish species. The spawning habitat for the prey species of Bear Lake consists of cobble which is present in the littoral zone of the lake. The littoral zone is classified as the area of the water column that has light penetration, sufficient for macrophytes to photosynthesis, to reach the sediment floor of the lake. The analysis was performed using ESRI’s ArcMap and Python coding to calculate, automate, and illustrate this relationship; and to provide a possible methodology for water and wildlife management to apply to their unique situations to make informed decisions in the future. This method is advantageous when analyzing present or future conditions because of its versatility to create hypothetical scenarios.

New project plans are no longer accepted. Project Plan amendments are the only form of Project Plan that is still reviewed. Before submitting an application, applicants must meet with planning staff and receive an amendment checklist that outlines the required submission items. A Project Plan sets the development density, height limit, and public amenities for optional method projects in the CBD zones under the 2004 Zoning Ordinance. For further details: https://montgomeryplanning.org/development/development-applications/project-plan/ For more information, contact: GIS Manager Information Technology & Innovation (ITI) Montgomery County Planning Department, MNCPPC T: 301-650-5620

This web map shows the location of the “City in Time” project to experience the historical scenes in Hong Kong. It is a subset of the geo-referenced public facility data made available by the Culture, Sports and Tourism Bureau under the Government of Hong Kong Special Administrative Region (the “Government”) at https://portal.csdi.gov.hk ("CSDI Portal"). The source data is processed and converted to Esri File Geodatabase format and then uploaded to Esri’s ArcGIS Online platform for sharing and reference purpose. The objectives are to facilitate our Hong Kong ArcGIS Online users to use the data in a spatial ready format and save their data conversion effort. For details about the data, source format and terms of conditions of usage, please refer to the website of Hong Kong CSDI Portal at https://portal.csdi.gov.hk.

This metadata encompasses the "wells" directory of the CD-ROM which contains the file wells.shp. This dataset contains petroleum exploration and development wells drilled in the Otway Basin region (see GEOGRAPHIC BOUNDING BOX) taken from Geoscience Australia's database called 'PEDIN'.

An ArcGIS Dashboard used by internal and external stakeholders to monitor active capital projects.

description: Quivira National Wildlife Refuge was established in 1955, and a detailed vegetation map was not available for management purposes. With the present development of a biological program and Comprehensive Conservation Plan (CCP), a baseline vegetation map of the refuge was identified as a necessity. Development of the vegetation map and associated report was a multi-step process. Aerial photography (NAIP, 2008) was used with eCognition to create polygons of different plant communities based on the likeness of surrounding pixels in the area. Prior to ground-truthing, the following activities were accomplished: training on vegetation mapping using GIS (previous experience and National Conservation Training Center course), creation of an vegetation association and alliance dichotomous key, development of a refuge plant key and identification skills, and preparation of maps for ground truthing. Once out in the field dominant plants were identified for appropriate vegetation alliance and association classification, plant specimens were collected for the refuge herbarium as necessary and additional observations and photos were gathered for the report. Over the course of the project, classification data was entered into a GIS and polygons were appropriately modified to create the final map. At Quivira, results found a total of 42 alliances and 43 associations.The most dominant plants throughout the refuge in 2008 based on canopy cover were saltgrass, plum, little bluestem and cottonwood. The number of alliances and associations found on the refuge show high species diversity.; abstract: Quivira National Wildlife Refuge was established in 1955, and a detailed vegetation map was not available for management purposes. With the present development of a biological program and Comprehensive Conservation Plan (CCP), a baseline vegetation map of the refuge was identified as a necessity. Development of the vegetation map and associated report was a multi-step process. Aerial photography (NAIP, 2008) was used with eCognition to create polygons of different plant communities based on the likeness of surrounding pixels in the area. Prior to ground-truthing, the following activities were accomplished: training on vegetation mapping using GIS (previous experience and National Conservation Training Center course), creation of an vegetation association and alliance dichotomous key, development of a refuge plant key and identification skills, and preparation of maps for ground truthing. Once out in the field dominant plants were identified for appropriate vegetation alliance and association classification, plant specimens were collected for the refuge herbarium as necessary and additional observations and photos were gathered for the report. Over the course of the project, classification data was entered into a GIS and polygons were appropriately modified to create the final map. At Quivira, results found a total of 42 alliances and 43 associations.The most dominant plants throughout the refuge in 2008 based on canopy cover were saltgrass, plum, little bluestem and cottonwood. The number of alliances and associations found on the refuge show high species diversity.

Cloud GIS Market size was valued at USD 890.81 Million in 2023 and is projected to reach USD 2298.38 Million by 2031, growing at a CAGR of 14.5% from 2024 to 2031.

Key Market Drivers
• Increased Adoption of Cloud Computing: Cloud computing provides scalable resources that can be adjusted based on demand, making it easier for organizations to manage and process large GIS datasets. The pay-as-you-go pricing models of cloud services reduce the need for significant upfront investments in hardware and software, making GIS more accessible to small and medium-sized enterprises.
• Growing Need for Spatial Data Integration: The ability to integrate and analyze large volumes of spatial and non-spatial data helps organizations make more informed decisions. The proliferation of Internet of Things (IoT) devices generates massive amounts of spatial data that can be processed and analyzed using Cloud GIS.
• Advancements in GIS Technology: User-friendly interfaces and visualization tools make it easier for non-experts to use GIS applications. Advanced analytical tools and machine learning algorithms available in cloud platforms enhance the capabilities of traditional GIS.
• Increased Demand for Real-Time Data: Industries like disaster management, transportation, and logistics require real-time data processing and analysis, which is facilitated by Cloud GIS. The need for up-to-date maps and spatial data drives the adoption of cloud-based GIS solutions.
• Collaboration and Sharing Needs: The ability to access GIS data and collaborate from anywhere enhances productivity and supports remote work environments. Cloud GIS supports simultaneous access by multiple users, facilitating better teamwork and data sharing.
• Urbanization and Smart Cities Initiatives: Cloud GIS is crucial for smart city initiatives, urban planning, and infrastructure development, providing the tools needed for efficient resource management. Supports planning and monitoring of sustainable development projects by providing comprehensive spatial analysis capabilities.
• Government and Policy Support: Increased government investment in geospatial technologies and smart infrastructure projects drives the adoption of Cloud GIS. Compliance with regulatory requirements for environmental monitoring and land use planning necessitates the use of advanced GIS tools.
• Industry-Specific Applications: Precision farming and land management benefit from the advanced analytics and data integration capabilities of Cloud GIS. Epidemiology and public health monitoring rely on spatial data analysis for tracking disease outbreaks and resource allocation.